[PATCH 02/11] gpio: Add support for SC5XX-family processor GPIO driver
Greg Malysa
greg.malysa at timesys.com
Wed May 15 23:57:39 CEST 2024
This adds support for using the GPIO pins on the SC5XX family of SoCs
from Analog Devices.
Co-developed-by: Nathan Barrett-Morrison <nathan.morrison at timesys.com>
Signed-off-by: Nathan Barrett-Morrison <nathan.morrison at timesys.com>
Co-developed-by: Ian Roberts <ian.roberts at timesys.com>
Signed-off-by: Ian Roberts <ian.roberts at timesys.com>
Signed-off-by: Vasileios Bimpikas <vasileios.bimpikas at analog.com>
Signed-off-by: Utsav Agarwal <utsav.agarwal at analog.com>
Signed-off-by: Arturs Artamonovs <arturs.artamonovs at analog.com>
Signed-off-by: Greg Malysa <greg.malysa at timesys.com>
---
MAINTAINERS | 1 +
drivers/gpio/Kconfig | 9 ++
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-adi-adsp.c | 179 +++++++++++++++++++++++++++++++++++
4 files changed, 190 insertions(+)
create mode 100644 drivers/gpio/gpio-adi-adsp.c
diff --git a/MAINTAINERS b/MAINTAINERS
index dabc7d0591..5d7b0f39ac 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -610,6 +610,7 @@ T: git https://github.com/analogdevicesinc/lnxdsp-u-boot
F: arch/arm/include/asm/arch-adi/
F: arch/arm/mach-sc5xx/
F: drivers/clk/adi/
+F: drivers/gpio/gpio-adi-adsp.c
F: drivers/pinctrl/pinctrl-adi-adsp.c
F: drivers/serial/serial_adi_uart4.c
F: drivers/timer/adi_sc5xx_timer.c
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index b050585389..142fe44533 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -97,6 +97,15 @@ config SPL_DM_GPIO_LOOKUP_LABEL
different gpios on different hardware versions
for the same functionality in board code.
+config ADI_GPIO
+ bool "ADI GPIO driver"
+ depends on DM_GPIO && (SC57X || SC58X || SC59X || SC59X_64)
+ help
+ This driver supports GPIO banks on SC5xx processors. It
+ supports inputs and outputs but does not support pin
+ interrupt functionality (PINT) or other features in the
+ Linux version of the driver.
+
config ALTERA_PIO
bool "Altera PIO driver"
depends on DM_GPIO
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 4a29315435..ba58fbafd1 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_$(SPL_TPL_)DM_GPIO) += gpio-uclass.o
obj-$(CONFIG_$(SPL_)DM_PCA953X) += pca953x_gpio.o
+obj-$(CONFIG_ADI_GPIO) += gpio-adi-adsp.o
obj-$(CONFIG_ASPEED_GPIO) += gpio-aspeed.o
obj-$(CONFIG_AT91_GPIO) += at91_gpio.o
obj-$(CONFIG_ATMEL_PIO4) += atmel_pio4.o
diff --git a/drivers/gpio/gpio-adi-adsp.c b/drivers/gpio/gpio-adi-adsp.c
new file mode 100644
index 0000000000..0ce00572e0
--- /dev/null
+++ b/drivers/gpio/gpio-adi-adsp.c
@@ -0,0 +1,179 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * (C) Copyright 2022 - Analog Devices, Inc.
+ *
+ * Written and/or maintained by Timesys Corporation
+ *
+ * Author: Greg Malysa <greg.malysa at timesys.com>
+ * Additional Contact: Nathan Barrett-Morrison <nathan.morrison at timesys.com>
+ */
+
+#include <dm.h>
+#include <asm-generic/gpio.h>
+#include <dm/device_compat.h>
+#include <linux/bitops.h>
+#include <linux/io.h>
+
+#define ADSP_PORT_MMIO_SIZE 0x80
+#define ADSP_PORT_PIN_SIZE 16
+
+#define ADSP_PORT_REG_FER 0x00
+#define ADSP_PORT_REG_FER_SET 0x04
+#define ADSP_PORT_REG_FER_CLEAR 0x08
+#define ADSP_PORT_REG_DATA 0x0c
+#define ADSP_PORT_REG_DATA_SET 0x10
+#define ADSP_PORT_REG_DATA_CLEAR 0x14
+#define ADSP_PORT_REG_DIR 0x18
+#define ADSP_PORT_REG_DIR_SET 0x1c
+#define ADSP_PORT_REG_DIR_CLEAR 0x20
+#define ADSP_PORT_REG_INEN 0x24
+#define ADSP_PORT_REG_INEN_SET 0x28
+#define ADSP_PORT_REG_INEN_CLEAR 0x2c
+#define ADSP_PORT_REG_PORT_MUX 0x30
+#define ADSP_PORT_REG_DATA_TGL 0x34
+#define ADSP_PORT_REG_POLAR 0x38
+#define ADSP_PORT_REG_POLAR_SET 0x3c
+#define ADSP_PORT_REG_POLAR_CLEAR 0x40
+#define ADSP_PORT_REG_LOCK 0x44
+#define ADSP_PORT_REG_TRIG_TGL 0x48
+
+struct adsp_gpio_priv {
+ void __iomem *base;
+ int ngpio;
+};
+
+static u32 get_port(unsigned int pin)
+{
+ return pin / ADSP_PORT_PIN_SIZE;
+}
+
+static u32 get_offset(unsigned int pin)
+{
+ return pin % ADSP_PORT_PIN_SIZE;
+}
+
+static int adsp_gpio_input(struct udevice *udev, unsigned int pin)
+{
+ struct adsp_gpio_priv *priv = dev_get_priv(udev);
+ u32 port, offset;
+ void __iomem *portbase;
+
+ if (pin < priv->ngpio) {
+ port = get_port(pin);
+ offset = get_offset(pin);
+ portbase = priv->base + port * ADSP_PORT_MMIO_SIZE;
+
+ iowrite16(BIT(offset), portbase + ADSP_PORT_REG_FER_CLEAR);
+ iowrite16(BIT(offset), portbase + ADSP_PORT_REG_DIR_CLEAR);
+ iowrite16(BIT(offset), portbase + ADSP_PORT_REG_INEN_SET);
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static int adsp_gpio_output(struct udevice *udev, unsigned int pin, int value)
+{
+ struct adsp_gpio_priv *priv = dev_get_priv(udev);
+ u32 port, offset;
+ void __iomem *portbase;
+
+ if (pin < priv->ngpio) {
+ port = get_port(pin);
+ offset = get_offset(pin);
+ portbase = priv->base + port * ADSP_PORT_MMIO_SIZE;
+
+ iowrite16(BIT(offset), portbase + ADSP_PORT_REG_FER_CLEAR);
+
+ if (value)
+ iowrite16(BIT(offset), portbase + ADSP_PORT_REG_DATA_SET);
+ else
+ iowrite16(BIT(offset), portbase + ADSP_PORT_REG_DATA_CLEAR);
+
+ iowrite16(BIT(offset), portbase + ADSP_PORT_REG_DIR_SET);
+ iowrite16(BIT(offset), portbase + ADSP_PORT_REG_INEN_CLEAR);
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static int adsp_gpio_get_value(struct udevice *udev, unsigned int pin)
+{
+ struct adsp_gpio_priv *priv = dev_get_priv(udev);
+ u32 port, offset;
+ u16 val;
+ void __iomem *portbase;
+
+ if (pin < priv->ngpio) {
+ port = get_port(pin);
+ offset = get_offset(pin);
+ portbase = priv->base + port * ADSP_PORT_MMIO_SIZE;
+
+ val = ioread16(portbase + ADSP_PORT_REG_DATA);
+ return !!(val & BIT(offset));
+ }
+
+ return 0;
+}
+
+static int adsp_gpio_set_value(struct udevice *udev, unsigned int pin, int value)
+{
+ struct adsp_gpio_priv *priv = dev_get_priv(udev);
+ u32 port, offset;
+ void __iomem *portbase;
+
+ if (pin < priv->ngpio) {
+ port = get_port(pin);
+ offset = get_offset(pin);
+ portbase = priv->base + port * ADSP_PORT_MMIO_SIZE;
+
+ if (value)
+ iowrite16(BIT(offset), portbase + ADSP_PORT_REG_DATA_SET);
+ else
+ iowrite16(BIT(offset), portbase + ADSP_PORT_REG_DATA_CLEAR);
+ }
+
+ return 0;
+}
+
+static const struct dm_gpio_ops adsp_gpio_ops = {
+ .direction_input = adsp_gpio_input,
+ .direction_output = adsp_gpio_output,
+ .get_value = adsp_gpio_get_value,
+ .set_value = adsp_gpio_set_value,
+};
+
+static int adsp_gpio_probe(struct udevice *udev)
+{
+ struct adsp_gpio_priv *priv = dev_get_priv(udev);
+ struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(udev);
+
+ uc_priv->bank_name = "adsp gpio";
+ uc_priv->gpio_count = dev_read_u32_default(udev, "adi,ngpios", 0);
+
+ if (!uc_priv->gpio_count) {
+ dev_err(udev, "Missing adi,ngpios property!\n");
+ return -ENOENT;
+ }
+
+ priv->base = dev_read_addr_ptr(udev);
+ priv->ngpio = uc_priv->gpio_count;
+
+ return 0;
+}
+
+static const struct udevice_id adsp_gpio_match[] = {
+ { .compatible = "adi,adsp-gpio" },
+ { },
+};
+
+U_BOOT_DRIVER(adi_adsp_gpio) = {
+ .name = "adi_adsp_gpio",
+ .id = UCLASS_GPIO,
+ .ops = &adsp_gpio_ops,
+ .probe = adsp_gpio_probe,
+ .priv_auto = sizeof(struct adsp_gpio_priv),
+ .of_match = adsp_gpio_match,
+ .flags = DM_FLAG_PRE_RELOC,
+};
--
2.43.2
More information about the U-Boot
mailing list