[PATCH 00/10] rockchip: px30: migrate to common bss and stack addresses + UART fixes for evb-px30

[Heiko Stübner]

Am Mittwoch, 22. Mai 2024, 10:39:25 CEST schrieb Quentin Schulz:
> Hi Tom,
> 
> On 5/21/24 8:04 PM, Tom Rini wrote:
> > On Tue, May 21, 2024 at 07:39:53PM +0200, Quentin Schulz wrote:
> >> PX30 Ringneck ran out of memory in the allocation pool of U-Boot proper
> >> pre-reloc. Something needed to be done. Jonas did migrate a few SoCs
> >> already to this common bss+stack addresses so it made sense to follow
> >> the same route for one additional SoC: PX30.
> >>
> >> While at it, also fix a few issues related to UART on the PX30 Mini EVB
> >> I could test.
> >>
> >> Boot (to U-Boot CLI) tested on PX30 Ringneck and PX30 Mini-EVB.
> >>
> >> Thanks to Jonas for hinting where to look at.
> >>
> >> Signed-off-by: Quentin Schulz <quentin.schulz at cherry.de>
> >> ---
> >> Quentin Schulz (10):
> >>        rockchip: px30: default TPL_SYS_MALLOC_F_LEN to 0x600 on PX30 Kconfig level
> >>        rockchip: Use common bss and stack addresses on PX30
> >>        rockchip: ringneck_px30: Use common bss and stack addresses
> >>        rockchip: evb-px30: Use common bss and stack addresses
> >>        rockchip: firefly-px30: Use common bss and stack addresses
> >>        rockchip: odroid-go2: Use common bss and stack addresses
> >>        rockchip: px30-core-*: Use common bss and stack addresses
> >>        rockchip: px30: make UART pinmux accessible to TPL/SPL DTB
> >>        rockchip: evb-px30: do not remove pinctrl nodes from SPL DTB
> >>        rockchip: evb-px30: make UART5 the debug UART
> >>
> >>   arch/arm/dts/px30-u-boot.dtsi                 | 16 ++++++++++++++++
> >>   arch/arm/mach-rockchip/px30/Kconfig           |  8 +++++++-
> >>   configs/evb-px30_defconfig                    | 23 +++++------------------
> >>   configs/firefly-px30_defconfig                | 19 +++----------------
> >>   configs/odroid-go2_defconfig                  | 19 +++----------------
> >>   configs/px30-core-ctouch2-of10-px30_defconfig | 19 +++----------------
> >>   configs/px30-core-ctouch2-px30_defconfig      | 19 +++----------------
> >>   configs/px30-core-edimm2.2-px30_defconfig     | 19 +++----------------
> >>   configs/ringneck-px30_defconfig               | 19 +++----------------
> >>   9 files changed, 46 insertions(+), 115 deletions(-)
> >> ---
> >> base-commit: a7f0154c412859323396111dd0c09dbafbc153cb
> >> change-id: 20240521-px30-2024-07-rc-7136f6241d29
> > 
> > As I assume we want to fix the platforms for v2024.07, is this the level
> > of config changes everyone is comfortable with on the platforms? Or
> > should we just go with the minimum for release and the rest to -next?
> > 
> 
> I can tell you that Ringneck doesn't work anymore on v2024.07-rc, but 
> the PX30 Mini EVB was still reaching U-Boot CLI without the changes. I 
> don't know about the other boards.
> 
> So I could split this into two series, one for master, one for next.
> 
> I could suggest: patch 1 to 3 in master, the rest in next. Patch 1 is 
> just moving things around. Patch 2 is doing nothing if nobody uses 
> ROCKCHIP_COMMON_STACK_ADDR and SPL_SHARES_INIT_SP_ADDR (which is the 
> case for px30 boards). Patch 3 is for fixing Ringneck, which I know is 
> broken.
> 
> Heiko having access to the Odroid Go2, maybe he could test without my 
> patches and see if it reaches the CLI to know if we should pull it in 
> for master as well.

I did that yesterday evening. The Odroid Go2 also reached u-boot CLI
and also booted without these changes. So I guess it's small enough
or whatever.

So at least the Go2 is fine on 2024.07-rc3 either way with or without
this series.

Heiko