[PATCH 00/10] rockchip: px30: migrate to common bss and stack addresses + UART fixes for evb-px30
Quentin Schulz
quentin.schulz at cherry.de
Wed May 22 10:39:25 CEST 2024
Hi Tom,
On 5/21/24 8:04 PM, Tom Rini wrote:
> On Tue, May 21, 2024 at 07:39:53PM +0200, Quentin Schulz wrote:
>> PX30 Ringneck ran out of memory in the allocation pool of U-Boot proper
>> pre-reloc. Something needed to be done. Jonas did migrate a few SoCs
>> already to this common bss+stack addresses so it made sense to follow
>> the same route for one additional SoC: PX30.
>>
>> While at it, also fix a few issues related to UART on the PX30 Mini EVB
>> I could test.
>>
>> Boot (to U-Boot CLI) tested on PX30 Ringneck and PX30 Mini-EVB.
>>
>> Thanks to Jonas for hinting where to look at.
>>
>> Signed-off-by: Quentin Schulz <quentin.schulz at cherry.de>
>> ---
>> Quentin Schulz (10):
>> rockchip: px30: default TPL_SYS_MALLOC_F_LEN to 0x600 on PX30 Kconfig level
>> rockchip: Use common bss and stack addresses on PX30
>> rockchip: ringneck_px30: Use common bss and stack addresses
>> rockchip: evb-px30: Use common bss and stack addresses
>> rockchip: firefly-px30: Use common bss and stack addresses
>> rockchip: odroid-go2: Use common bss and stack addresses
>> rockchip: px30-core-*: Use common bss and stack addresses
>> rockchip: px30: make UART pinmux accessible to TPL/SPL DTB
>> rockchip: evb-px30: do not remove pinctrl nodes from SPL DTB
>> rockchip: evb-px30: make UART5 the debug UART
>>
>> arch/arm/dts/px30-u-boot.dtsi | 16 ++++++++++++++++
>> arch/arm/mach-rockchip/px30/Kconfig | 8 +++++++-
>> configs/evb-px30_defconfig | 23 +++++------------------
>> configs/firefly-px30_defconfig | 19 +++----------------
>> configs/odroid-go2_defconfig | 19 +++----------------
>> configs/px30-core-ctouch2-of10-px30_defconfig | 19 +++----------------
>> configs/px30-core-ctouch2-px30_defconfig | 19 +++----------------
>> configs/px30-core-edimm2.2-px30_defconfig | 19 +++----------------
>> configs/ringneck-px30_defconfig | 19 +++----------------
>> 9 files changed, 46 insertions(+), 115 deletions(-)
>> ---
>> base-commit: a7f0154c412859323396111dd0c09dbafbc153cb
>> change-id: 20240521-px30-2024-07-rc-7136f6241d29
>
> As I assume we want to fix the platforms for v2024.07, is this the level
> of config changes everyone is comfortable with on the platforms? Or
> should we just go with the minimum for release and the rest to -next?
>
I can tell you that Ringneck doesn't work anymore on v2024.07-rc, but
the PX30 Mini EVB was still reaching U-Boot CLI without the changes. I
don't know about the other boards.
So I could split this into two series, one for master, one for next.
I could suggest: patch 1 to 3 in master, the rest in next. Patch 1 is
just moving things around. Patch 2 is doing nothing if nobody uses
ROCKCHIP_COMMON_STACK_ADDR and SPL_SHARES_INIT_SP_ADDR (which is the
case for px30 boards). Patch 3 is for fixing Ringneck, which I know is
broken.
Heiko having access to the Odroid Go2, maybe he could test without my
patches and see if it reaches the CLI to know if we should pull it in
for master as well.
Does this make sense?
Thanks,
Quentin
More information about the U-Boot
mailing list