[PATCH v1 3/3] usb: tcpm: fix toggling in host (SRC) mode

[bigunclemax at gmail.com]

From: Maksim Kiselev <bigunclemax at gmail.com>

PU\PD resistors on CC lines must be configured before running the TCPM
state machine.

Also, when the Type-C port acts as a host (SRC), the VBUS sould be enabled
only after the toggling has been completed. And we have to wait for
the corresponding IRQ to finish the toggling process. But this doesn't
happen because we exit from tcpm_poll_event() if VBUS != OK.

So, Let's check for VBUS state only when the port acts as a host (SRC)
to solve this problem.

Signed-off-by: Maksim Kiselev <bigunclemax at gmail.com>
---
 drivers/usb/tcpm/tcpm.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/tcpm/tcpm.c b/drivers/usb/tcpm/tcpm.c
index 0aee57cb2f4..c9f8dbdc795 100644
--- a/drivers/usb/tcpm/tcpm.c
+++ b/drivers/usb/tcpm/tcpm.c
@@ -2122,6 +2122,12 @@ static void tcpm_init(struct udevice *dev)
 	else
 		port->vbus_vsafe0v = true;
 
+	if (port->self_powered)
+		tcpm_set_cc(dev, TYPEC_CC_OPEN);
+	else
+		tcpm_set_cc(dev, tcpm_default_state(port) == SNK_UNATTACHED ?
+				TYPEC_CC_RD : tcpm_rp_cc(port));
+
 	tcpm_set_state(dev, tcpm_default_state(port), 0);
 
 	if (drvops->get_cc(dev, &cc1, &cc2) == 0)
@@ -2234,7 +2240,7 @@ static void tcpm_poll_event(struct udevice *dev)
 	const struct dm_tcpm_ops *drvops = dev_get_driver_ops(dev);
 	struct tcpm_port *port = dev_get_uclass_plat(dev);
 
-	if (!drvops->get_vbus(dev))
+	if (!drvops->get_vbus(dev) && (tcpm_default_state(port) == SNK_UNATTACHED))
 		return;
 
 	while (port->poll_event_cnt < TCPM_POLL_EVENT_TIME_OUT) {
-- 
2.45.2