[PATCH 03/13] rockchip: rk3288-tinker: Only include required DT nodes in TPL

[Jonas Karlman]

Drop the unneeded bootph-all prop from dmc node, it is already defined
in soc u-boot.dtsi.

Remove booth-all prop from gpio7 node, this node is not needed in TPL.

Adjust bootph props to include pinctrl related nodes for UART2.

Remove the explicit bootph-all prop from the pinctrl node, any bootph-
prop will automatically be propagated to the pinctrl node.

Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
---
 arch/arm/dts/rk3288-tinker-u-boot.dtsi | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

diff --git a/arch/arm/dts/rk3288-tinker-u-boot.dtsi b/arch/arm/dts/rk3288-tinker-u-boot.dtsi
index 032dac221c24..1665e4f5d10f 100644
--- a/arch/arm/dts/rk3288-tinker-u-boot.dtsi
+++ b/arch/arm/dts/rk3288-tinker-u-boot.dtsi
@@ -6,7 +6,6 @@
 #include "rk3288-u-boot.dtsi"
 
 &dmc {
-	bootph-all;
 	rockchip,pctl-timing = <0x215 0xc8 0x0 0x35 0x26 0x2 0x70 0x2000d
 		0x6 0x0 0x8 0x4 0x17 0x24 0xd 0x6
 		0x4 0x8 0x4 0x76 0x4 0x0 0x30 0x0
@@ -18,6 +17,7 @@
 };
 
 &gpio7 {
+	/delete-property/ bootph-all;
 	bootph-pre-ram;
 };
 
@@ -29,7 +29,7 @@
 };
 
 &pcfg_pull_none {
-	bootph-pre-ram;
+	bootph-all;
 };
 
 &pcfg_pull_none_drv_8ma {
@@ -37,17 +37,13 @@
 };
 
 &pcfg_pull_up {
-	bootph-pre-ram;
+	bootph-all;
 };
 
 &pcfg_pull_up_drv_8ma {
 	bootph-pre-ram;
 };
 
-&pinctrl {
-	bootph-all;
-};
-
 &sdmmc {
 	bootph-pre-ram;
 };
@@ -77,7 +73,8 @@
 };
 
 &uart2_xfer {
-	bootph-all;
+	bootph-pre-sram;
+	bootph-pre-ram;
 };
 
 &vcc_sd {
-- 
2.46.2