[PATCH 03/13] rockchip: rk3288-tinker: Only include required DT nodes in TPL

[Kever Yang]

On 2024/11/6 00:00, Jonas Karlman wrote:
> Drop the unneeded bootph-all prop from dmc node, it is already defined
> in soc u-boot.dtsi.
>
> Remove booth-all prop from gpio7 node, this node is not needed in TPL.
>
> Adjust bootph props to include pinctrl related nodes for UART2.
>
> Remove the explicit bootph-all prop from the pinctrl node, any bootph-
> prop will automatically be propagated to the pinctrl node.
>
> Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>

Thanks,
- Kever
> ---
>   arch/arm/dts/rk3288-tinker-u-boot.dtsi | 13 +++++--------
>   1 file changed, 5 insertions(+), 8 deletions(-)
>
> diff --git a/arch/arm/dts/rk3288-tinker-u-boot.dtsi b/arch/arm/dts/rk3288-tinker-u-boot.dtsi
> index 032dac221c24..1665e4f5d10f 100644
> --- a/arch/arm/dts/rk3288-tinker-u-boot.dtsi
> +++ b/arch/arm/dts/rk3288-tinker-u-boot.dtsi
> @@ -6,7 +6,6 @@
>   #include "rk3288-u-boot.dtsi"
>   
>   &dmc {
> -	bootph-all;
>   	rockchip,pctl-timing = <0x215 0xc8 0x0 0x35 0x26 0x2 0x70 0x2000d
>   		0x6 0x0 0x8 0x4 0x17 0x24 0xd 0x6
>   		0x4 0x8 0x4 0x76 0x4 0x0 0x30 0x0
> @@ -18,6 +17,7 @@
>   };
>   
>   &gpio7 {
> +	/delete-property/ bootph-all;
>   	bootph-pre-ram;
>   };
>   
> @@ -29,7 +29,7 @@
>   };
>   
>   &pcfg_pull_none {
> -	bootph-pre-ram;
> +	bootph-all;
>   };
>   
>   &pcfg_pull_none_drv_8ma {
> @@ -37,17 +37,13 @@
>   };
>   
>   &pcfg_pull_up {
> -	bootph-pre-ram;
> +	bootph-all;
>   };
>   
>   &pcfg_pull_up_drv_8ma {
>   	bootph-pre-ram;
>   };
>   
> -&pinctrl {
> -	bootph-all;
> -};
> -
>   &sdmmc {
>   	bootph-pre-ram;
>   };
> @@ -77,7 +73,8 @@
>   };
>   
>   &uart2_xfer {
> -	bootph-all;
> +	bootph-pre-sram;
> +	bootph-pre-ram;
>   };
>   
>   &vcc_sd {