[PATCH] boot: image-board: Mismatch a type between variable and return value

[Jaehoon Chung]

> -----Original Message-----
> From: Marek Vasut <marek.vasut at mailbox.org>
> Sent: Wednesday, November 6, 2024 7:57 AM
> To: Jaehoon Chung <jh80.chung at samsung.com>; u-boot at lists.denx.de
> Cc: trini at konsulko.com; sjg at chromium.org; marek.vasut+renesas at mailbox.org;
> laurent.pinchart at ideasonboard.com; m.szyprowski at samsung.com
> Subject: Re: [PATCH] boot: image-board: Mismatch a type between variable and return value
>
> On 11/5/24 11:11 PM, Jaehoon Chung wrote:
> > phys_addr_t can be used unsigned long long type with CONFIG_PHYS_64BIT.
> > But hextoul() is always returning to unsigned long. It can be assigned
> > to unexpected value. To avoid wrong behavior, change from hextoul() to
> > simple_strtoull().
> >
> > Fixes: a4df06e41fa2 ("boot: fdt: Change type of env_get_bootm_low() to phys_addr_t")
>
> Looking at:
>
> 7e5f460ec457 ("global: Convert simple_strtoul() with hex to hextoul()")

Thanks for informing it.

>
> do you have to update any of the other hextoul() calls too ?

I didn't check other hextoul().
During booting with initramfs on RPi (32bit), I found the problem that is not working fine because of this.

>
> Maybe we need hextoull() ?

IMO, We need hextoull() for some cases.
If there is no objection, I will send the patch for adding hextoull().
And I will check entire cases.

Best Regards,
Jaehoon Chung

>
> > Signed-off-by: Jaehoon Chung <jh80.chung at samsung.com>
> > ---
> >   boot/image-board.c | 2 +-
> >   1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/boot/image-board.c b/boot/image-board.c
> > index 1757e5816d84..977343a8995c 100644
> > --- a/boot/image-board.c
> > +++ b/boot/image-board.c
> > @@ -547,7 +547,7 @@ int boot_ramdisk_high(ulong rd_data, ulong rd_len, ulong *initrd_start,
> >   		/* a value of "no" or a similar string will act like 0,
> >   		 * turning the "load high" feature off. This is intentional.
> >   		 */
> > -		initrd_high = hextoul(s, NULL);
> > +		initrd_high = simple_strtoull(s, NULL, 16);
> >   		if (initrd_high == ~0)
> >   			initrd_copy_to_ram = 0;
> >   	} else {
>