[PATCH] arm64: zynqmp: Set default RTC device at start

[Michal Simek]

For RTC to start to operate there is a need to call the driver. The simple
way to do it is to set default RTC instance which will call the probe and
do basic initialization.

Signed-off-by: Michal Simek <michal.simek at amd.com>
---

 board/xilinx/zynqmp/zynqmp_kria.env | 1 +
 1 file changed, 1 insertion(+)

diff --git a/board/xilinx/zynqmp/zynqmp_kria.env b/board/xilinx/zynqmp/zynqmp_kria.env
index 927f398c3c38..ff3a0924de7d 100644
--- a/board/xilinx/zynqmp/zynqmp_kria.env
+++ b/board/xilinx/zynqmp/zynqmp_kria.env
@@ -77,6 +77,7 @@ tpm_kv260=if test ${card1_rev} = A -o ${card1_rev} = B -o ${card1_rev} = Y -o ${
 tpm_kd240=if test ${card1_rev} = A; then run tpm_reset; fi
 
 board_setup=\
+rtc dev 0; \
 zynqmp mmio_write 0xFFCA0010 0xfff 0; \
 if test ${card1_name} = SCK-KV-G; then run kv260_setup; run tpm_kv260; fi;\
 if test ${card1_name} = SCK-KR-G; then run kr260_setup; run tpm_reset; fi;\
-- 
2.43.0