[PATCH] mmc: don't print 'MMC:' if there are no MMC devices

[Dragan Simic]

Hello Caleb,

Thanks for the patch.  Please, see a comment below.

On 2024-11-13 06:30, Caleb Connolly wrote:
> It may be the case that MMC support is enabled even though the board
> we're booting on doesn't have any MMC devices. Move the print over to
> the print_mmc_devices() function where we can only print it if we
> actually have MMC devices.
> 
> Signed-off-by: Caleb Connolly <caleb.connolly at linaro.org>
> ---
>  common/board_r.c         | 1 -
>  drivers/mmc/mmc-uclass.c | 4 +++-
>  drivers/mmc/mmc_legacy.c | 5 +++++
>  3 files changed, 8 insertions(+), 2 deletions(-)
> 
> diff --git a/common/board_r.c b/common/board_r.c
> index 62228a723e12..232a8fd19f03 100644
> --- a/common/board_r.c
> +++ b/common/board_r.c
> @@ -384,9 +384,8 @@ static int initr_onenand(void)
> 
>  #ifdef CONFIG_MMC
>  static int initr_mmc(void)
>  {
> -	puts("MMC:   ");
>  	mmc_initialize(gd->bd);
>  	return 0;
>  }
>  #endif
> diff --git a/drivers/mmc/mmc-uclass.c b/drivers/mmc/mmc-uclass.c
> index c8db4f811c2f..56fe29249c36 100644
> --- a/drivers/mmc/mmc-uclass.c
> +++ b/drivers/mmc/mmc-uclass.c
> @@ -384,9 +384,11 @@ void print_mmc_devices(char separator)
>  	     dev;
>  	     uclass_next_device(&dev), first = false) {
>  		struct mmc *m = mmc_get_mmc_dev(dev);
> 
> -		if (!first) {
> +		if (first) {
> +			printf("MMC:  ");
> +		} else {
>  			printf("%c", separator);
>  			if (separator != '\n')
>  				puts(" ");
>  		}
> diff --git a/drivers/mmc/mmc_legacy.c b/drivers/mmc/mmc_legacy.c
> index 8f8ba34be717..f4a049a4a4d4 100644
> --- a/drivers/mmc/mmc_legacy.c
> +++ b/drivers/mmc/mmc_legacy.c
> @@ -98,8 +98,9 @@ void print_mmc_devices(char separator)
>  {
>  	struct mmc *m;
>  	struct list_head *entry;
>  	char *mmc_type;
> +	bool first = true;
> 
>  	list_for_each(entry, &mmc_devices) {
>  		m = list_entry(entry, struct mmc, link);
> 
> @@ -107,8 +108,12 @@ void print_mmc_devices(char separator)
>  			mmc_type = IS_SD(m) ? "SD" : "eMMC";
>  		else
>  			mmc_type = NULL;
> 
> +		if (first) {
> +			printf("MMC:  ");
> +			first = false;
> +		}

Can't we simply check for "entry == &mmc_devices->next" here and
avoid the introduction of "first"?

>  		printf("%s: %d", m->cfg->name, m->block_dev.devnum);
>  		if (mmc_type)
>  			printf(" (%s)", mmc_type);