2025.01-rc2 fails to boot on VisionFive2

[Andreas Schwab]

"Error reading cluster" is the new error.

U-Boot SPL 2025.01-rc2 (Nov 08 2024 - 07:13:26 +0000)
DDR version: dc2e84f0.
Trying to boot from MMC2


U-Boot 2025.01-rc2 (Nov 08 2024 - 07:13:26 +0000)

CPU:   sifive,u74-mc
Model: StarFive VisionFive 2 v1.2A
DRAM:  4 GiB
Core:  136 devices, 26 uclasses, devicetree: board
WDT:   Not starting watchdog at 13070000
MMC:   mmc at 16010000: 0, mmc at 16020000: 1
Loading Environment from SPIFlash... SF: Detected gd25lq128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
*** Warning - bad CRC, using default environment

StarFive EEPROM format v2

--------EEPROM INFO--------
Vendor : StarFive Technology Co., Ltd.
Product full SN: VF7110A1-2249-D004E000-00000408
data version: 0x2
PCB revision: 0xa1
BOM revision: A
Ethernet MAC0 address: 6c:cf:39:00:16:8d
Ethernet MAC1 address: 6c:cf:39:00:16:8e
--------EEPROM INFO--------

starfive_7110_pcie pcie at 2b000000: Starfive PCIe bus probed.
starfive_7110_pcie pcie at 2c000000: Starfive PCIe bus probed.
In:    serial at 10000000
Out:   serial at 10000000
Err:   serial at 10000000
Net:   eth0: ethernet at 16030000, eth1: ethernet at 16040000
starting USB...
Bus xhci_pci: Register 5000420 NbrPorts 5
Starting the controller
USB XHCI 1.00
scanning bus xhci_pci for devices... 2 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
Working FDT set to ff72ca10
Hit any key to stop autoboot:  0 
Card did not respond to voltage select! : -110
** Booting bootflow '<NULL>' with efi_mgr
Error reading cluster
Loading Boot0000 'mmc 1' failed
EFI boot manager: Cannot load any image
Boot failed (err=-14)
Card did not respond to voltage select! : -110

-- 
Andreas Schwab, SUSE Labs, schwab at suse.de
GPG Key fingerprint = 0196 BAD8 1CE9 1970 F4BE  1748 E4D4 88E3 0EEA B9D7
"And now for something completely different."