[PATCH v3 5/5] configs: j7200_evm_r5_defconfig: Define K3_OPP_LOW

[Manorit Chawdhry]

Hi Aniket,

On 12:45-20241116, Aniket Limaye wrote:
> From: Reid Tonking <reidt at ti.com>
> 
> Define new CONFIG_K3_OPP_LOW under arm/mach-k3/Kconfig and add default
> value to j7200_evm_r5_defconfig
> 
> Signed-off-by: Reid Tonking <reidt at ti.com>
> Signed-off-by: Aniket Limaye <a-limaye at ti.com>
> 
> ---
> v3:
> - Add Kconfig dependency on K3_AVS0
> - Update commit msg to make it more clear
> - Link to v2: https://lore.kernel.org/u-boot/20241023130033.1826413-6-a-limaye@ti.com/
> 
> Signed-off-by: Aniket Limaye <a-limaye at ti.com>
> ---
>  arch/arm/mach-k3/Kconfig       | 7 +++++++

Should this be in mach-k3/r5/Kconfig?

>  configs/j7200_evm_r5_defconfig | 1 +
>  2 files changed, 8 insertions(+)
> 
> diff --git a/arch/arm/mach-k3/Kconfig b/arch/arm/mach-k3/Kconfig
> index f3f42b39213..c73396bfbf3 100644
> --- a/arch/arm/mach-k3/Kconfig
> +++ b/arch/arm/mach-k3/Kconfig
> @@ -103,6 +103,13 @@ config SYS_K3_BOOT_CORE_ID
>  	int
>  	default 16
>  
> +config K3_OPP_LOW
> +	depends on ARCH_K3 && K3_AVS0
> +	bool "Enable OPP_LOW on supported TI K3 SoCs"
> +	help
> +	  Enabling this will allow Socs with the proper efuse to run at a lower
> +	  MPU core voltage and adjust frequency according to SoC trm

nit: s/trm/TRM

> +
>  config K3_EARLY_CONS
>  	bool "Activate to allow for an early console during SPL"
>  	depends on SPL
> diff --git a/configs/j7200_evm_r5_defconfig b/configs/j7200_evm_r5_defconfig
> index f036a6fd46b..217759e5d1b 100644
> --- a/configs/j7200_evm_r5_defconfig
> +++ b/configs/j7200_evm_r5_defconfig
> @@ -102,6 +102,7 @@ CONFIG_K3_SEC_PROXY=y
>  CONFIG_FS_LOADER=y
>  CONFIG_SPL_FS_LOADER=y
>  CONFIG_K3_AVS0=y
> +# CONFIG_K3_OPP_LOW is not set
>  CONFIG_SUPPORT_EMMC_BOOT=y
>  CONFIG_SPL_MMC_HS400_SUPPORT=y
>  CONFIG_MMC_SDHCI=y
> -- 
> 2.47.0
>