[PATCH v13 3/7] usb: onboard-hub: add support for Microchip USB5744

[Marek Vasut]

On 11/18/24 11:07 AM, Venkatesh Yadav Abbarapu wrote:
> Add support for the Microchip USB5744 USB3.0 and USB2.0 Hub.
> The usb5744 driver trigger hub reset signal after soft reset.
> The usb5744 hub need to reset after the phy initialization,
> which toggles the gpio.
> 
> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu at amd.com>
> Reviewed-by: Marek Vasut <marex at denx.de>
> ---
>   common/usb_onboard_hub.c | 11 +++++++++++
>   1 file changed, 11 insertions(+)
> 
> diff --git a/common/usb_onboard_hub.c b/common/usb_onboard_hub.c
> index 812e7749de..4860de5323 100644
> --- a/common/usb_onboard_hub.c
> +++ b/common/usb_onboard_hub.c
> @@ -93,10 +93,21 @@ static const struct onboard_hub_data usb2514_data = {
>   	.reset_us = 1,
>   };
>   
> +static const struct onboard_hub_data usb5744_data = {
> +	.power_on_delay_us = 1000,
> +	.reset_us = 5,
> +};
> +
>   static const struct udevice_id usb_onboard_hub_ids[] = {
>   	/* Use generic usbVID,PID dt-bindings (usb-device.yaml) */
>   	{	.compatible = "usb424,2514",	/* USB2514B USB 2.0 */
>   		.data = (ulong)&usb2514_data,
> +	}, {
> +		.compatible = "usb424,2744",	/* USB2744 USB 2.0 */
> +		.data = (ulong)&usb5744_data,
> +	}, {
> +		.compatible = "usb424,5744",	/* USB5744 USB 3.0 */
> +		.data = (ulong)&usb5744_data,
>   	}
>   };
Let's finish the ongoing discussion in

Re: [PATCH v11 3/7] usb: onboard-hub: add support for Microchip USB5744

In the meantime, no need to send new versions of the series.

I retract my RB on this patch until the discussion is concluded too.