[PATCH] watchdog: rti: drop hack manipulating WDT clock rate

[A. Sverdlin]

From: Alexander Sverdlin <alexander.sverdlin at siemens.com>

The hack itself seems to be copied from Linux rti_wdt.c, but the WDT reset
principle is different in U-Boot. While Linux relies on correct frequencies
and timers and doesn't check the actual WDT counter value U-Boot driver
seems to be more rubust: it does compare RTIDWDCNTR vs RTIDWDPRLD.

Now the root cause of the original motivation to manipulate the clock rate
is said to be understood and fixed in Linux commit cae58516534e
("watchdog: rti_wdt: Set min_hw_heartbeat_ms to accommodate a safety margin")
which simultaneously removed the hack itself.

While is fix part of the mentioned patch is neither applicable nor requied
for the U-Boot driver just drop the hack setting WDT clock rate to 90% of
the real rate. This has a nice effect that the WDT timeout is now as
requested and not 10% shorter.

Signed-off-by: Alexander Sverdlin <alexander.sverdlin at siemens.com>
---
 drivers/watchdog/rti_wdt.c | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/drivers/watchdog/rti_wdt.c b/drivers/watchdog/rti_wdt.c
index 99168d0cad03..f806e24e53da 100644
--- a/drivers/watchdog/rti_wdt.c
+++ b/drivers/watchdog/rti_wdt.c
@@ -186,14 +186,6 @@ static int rti_wdt_probe(struct udevice *dev)
 
 	priv->clk_hz = clk_get_rate(&clk);
 
-	/*
-	 * If watchdog is running at 32k clock, it is not accurate.
-	 * Adjust frequency down in this case so that it does not expire
-	 * earlier than expected.
-	 */
-	if (priv->clk_hz < 32768)
-		priv->clk_hz = priv->clk_hz * 9 / 10;
-
 	return 0;
 }
 
-- 
2.47.0