[PATCH] phy: qcom: Add SM8150 to QMP UFS PHY driver

[Julius Lehmann]

Copy PHY tables over from Linux to support SM8150

---
As the title suggests, this is really just a simple patch to add Qualcomm's SM8150 SoC to the QMP UFS PHY driver. It has been tested to work with https://lore.kernel.org/u-boot/20240930-topic-ufs-enhancements-v3-0-58234f84ab89@linaro.org/ on a Xiaomi Mi Pad 5.

Signed-off-by: Julius Lehmann <lehmanju at devpi.de>
---
 drivers/phy/qcom/phy-qcom-qmp-ufs.c | 62 +++++++++++++++++++++++++++++++++++++
 1 file changed, 62 insertions(+)

diff --git a/drivers/phy/qcom/phy-qcom-qmp-ufs.c b/drivers/phy/qcom/phy-qcom-qmp-ufs.c
index 8908a34df548340556d92ac8ca488dbbbd0e293a..11f92b8261aff48dddb63cd8de31db3716a45fb4 100644
--- a/drivers/phy/qcom/phy-qcom-qmp-ufs.c
+++ b/drivers/phy/qcom/phy-qcom-qmp-ufs.c
@@ -189,6 +189,29 @@ static const struct qmp_ufs_init_tbl sdm845_ufsphy_pcs[] = {
 	QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_MULTI_LANE_CTRL1, 0x02),
 };
 
+static const struct qmp_ufs_init_tbl sm8150_ufsphy_hs_g4_tx[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0x75),
+};
+
+static const struct qmp_ufs_init_tbl sm8150_ufsphy_hs_g4_rx[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x5a),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CTRL2, 0x81),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x0e),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_TERM_BW, 0x6f),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_MEASURE_TIME, 0x20),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0x80),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x3f),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0xff),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xff),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x6c),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0x6d),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0x6d),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0xed),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0x3c),
+};
+
 static const struct qmp_ufs_init_tbl sm8150_ufsphy_serdes[] = {
 	QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0xd9),
 	QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x11),
@@ -623,6 +646,44 @@ static const struct qmp_ufs_cfg sdm845_ufsphy_cfg = {
 	.no_pcs_sw_reset	= true,
 };
 
+static const struct qmp_ufs_cfg sm8150_ufsphy_cfg = {
+	.lanes			= 2,
+
+	.offsets		= &qmp_ufs_offsets,
+
+	.tbls = {
+		.serdes		= sm8150_ufsphy_serdes,
+		.serdes_num	= ARRAY_SIZE(sm8150_ufsphy_serdes),
+		.tx		= sm8150_ufsphy_tx,
+		.tx_num		= ARRAY_SIZE(sm8150_ufsphy_tx),
+		.rx		= sm8150_ufsphy_rx,
+		.rx_num		= ARRAY_SIZE(sm8150_ufsphy_rx),
+		.pcs		= sm8150_ufsphy_pcs,
+		.pcs_num	= ARRAY_SIZE(sm8150_ufsphy_pcs),
+	},
+	.tbls_hs_b = {
+		.serdes		= sm8150_ufsphy_hs_b_serdes,
+		.serdes_num	= ARRAY_SIZE(sm8150_ufsphy_hs_b_serdes),
+	},
+	.tbls_hs_g4 = {
+		.tx		= sm8150_ufsphy_hs_g4_tx,
+		.tx_num		= ARRAY_SIZE(sm8150_ufsphy_hs_g4_tx),
+		.rx		= sm8150_ufsphy_hs_g4_rx,
+		.rx_num		= ARRAY_SIZE(sm8150_ufsphy_hs_g4_rx),
+		.pcs		= sm8150_ufsphy_hs_g4_pcs,
+		.pcs_num	= ARRAY_SIZE(sm8150_ufsphy_hs_g4_pcs),
+	},
+	.clk_list		= sdm845_ufs_phy_clk_l,
+	.num_clks		= ARRAY_SIZE(sdm845_ufs_phy_clk_l),
+	.vreg_list		= qmp_ufs_vreg_l,
+	.num_vregs		= ARRAY_SIZE(qmp_ufs_vreg_l),
+	.reset_list		= qmp_ufs_reset_l,
+	.num_resets		= ARRAY_SIZE(qmp_ufs_reset_l),
+	.regs			= ufsphy_v4_regs_layout,
+
+	.no_pcs_sw_reset	= false,
+};
+
 static const struct qmp_ufs_cfg sm8250_ufsphy_cfg = {
 	.lanes			= 2,
 
@@ -1100,6 +1161,7 @@ static struct phy_ops qmp_ufs_ops = {
 
 static const struct udevice_id qmp_ufs_ids[] = {
 	{ .compatible = "qcom,sdm845-qmp-ufs-phy", .data = (ulong)&sdm845_ufsphy_cfg },
+	{ .compatible = "qcom,sm8150-qmp-ufs-phy", .data = (ulong)&sm8150_ufsphy_cfg },
 	{ .compatible = "qcom,sm8250-qmp-ufs-phy", .data = (ulong)&sm8250_ufsphy_cfg },
 	{ .compatible = "qcom,sm8550-qmp-ufs-phy", .data = (ulong)&sm8550_ufsphy_cfg },
 	{ .compatible = "qcom,sm8650-qmp-ufs-phy", .data = (ulong)&sm8650_ufsphy_cfg },

---
base-commit: 2d21dd440e052bb2c8ccc9fa3137ab40c8f87f14
change-id: 20241002-sm8150-qmp-phy-ddb990d1a1bc

Best regards,
-- 
Julius Lehmann <lehmanju at devpi.de>