[PATCH] phy: qcom: Add SM8150 to QMP UFS PHY driver

Neil Armstrong neil.armstrong at linaro.org
Thu Oct 3 12:12:56 CEST 2024


On 02/10/2024 20:52, Julius Lehmann wrote:
> Copy PHY tables over from Linux to support SM8150
> 
> ---
> As the title suggests, this is really just a simple patch to add Qualcomm's SM8150 SoC to the QMP UFS PHY driver. It has been tested to work with https://lore.kernel.org/u-boot/20240930-topic-ufs-enhancements-v3-0-58234f84ab89@linaro.org/ on a Xiaomi Mi Pad 5.
> 
> Signed-off-by: Julius Lehmann <lehmanju at devpi.de>
> ---
>   drivers/phy/qcom/phy-qcom-qmp-ufs.c | 62 +++++++++++++++++++++++++++++++++++++
>   1 file changed, 62 insertions(+)
> 
> diff --git a/drivers/phy/qcom/phy-qcom-qmp-ufs.c b/drivers/phy/qcom/phy-qcom-qmp-ufs.c
> index 8908a34df548340556d92ac8ca488dbbbd0e293a..11f92b8261aff48dddb63cd8de31db3716a45fb4 100644
> --- a/drivers/phy/qcom/phy-qcom-qmp-ufs.c
> +++ b/drivers/phy/qcom/phy-qcom-qmp-ufs.c
> @@ -189,6 +189,29 @@ static const struct qmp_ufs_init_tbl sdm845_ufsphy_pcs[] = {
>   	QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_MULTI_LANE_CTRL1, 0x02),
>   };
>   
> +static const struct qmp_ufs_init_tbl sm8150_ufsphy_hs_g4_tx[] = {
> +	QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0x75),
> +};
> +
> +static const struct qmp_ufs_init_tbl sm8150_ufsphy_hs_g4_rx[] = {
> +	QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x5a),
> +	QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CTRL2, 0x81),
> +	QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x0e),
> +	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_TERM_BW, 0x6f),
> +	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_MEASURE_TIME, 0x20),
> +	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0x80),
> +	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x01),
> +	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x3f),
> +	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0xff),
> +	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xff),
> +	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
> +	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x6c),
> +	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0x6d),
> +	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0x6d),
> +	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0xed),
> +	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0x3c),
> +};
> +
>   static const struct qmp_ufs_init_tbl sm8150_ufsphy_serdes[] = {
>   	QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0xd9),
>   	QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x11),
> @@ -623,6 +646,44 @@ static const struct qmp_ufs_cfg sdm845_ufsphy_cfg = {
>   	.no_pcs_sw_reset	= true,
>   };
>   
> +static const struct qmp_ufs_cfg sm8150_ufsphy_cfg = {
> +	.lanes			= 2,
> +
> +	.offsets		= &qmp_ufs_offsets,
> +
> +	.tbls = {
> +		.serdes		= sm8150_ufsphy_serdes,
> +		.serdes_num	= ARRAY_SIZE(sm8150_ufsphy_serdes),
> +		.tx		= sm8150_ufsphy_tx,
> +		.tx_num		= ARRAY_SIZE(sm8150_ufsphy_tx),
> +		.rx		= sm8150_ufsphy_rx,
> +		.rx_num		= ARRAY_SIZE(sm8150_ufsphy_rx),
> +		.pcs		= sm8150_ufsphy_pcs,
> +		.pcs_num	= ARRAY_SIZE(sm8150_ufsphy_pcs),
> +	},
> +	.tbls_hs_b = {
> +		.serdes		= sm8150_ufsphy_hs_b_serdes,
> +		.serdes_num	= ARRAY_SIZE(sm8150_ufsphy_hs_b_serdes),
> +	},
> +	.tbls_hs_g4 = {
> +		.tx		= sm8150_ufsphy_hs_g4_tx,
> +		.tx_num		= ARRAY_SIZE(sm8150_ufsphy_hs_g4_tx),
> +		.rx		= sm8150_ufsphy_hs_g4_rx,
> +		.rx_num		= ARRAY_SIZE(sm8150_ufsphy_hs_g4_rx),
> +		.pcs		= sm8150_ufsphy_hs_g4_pcs,
> +		.pcs_num	= ARRAY_SIZE(sm8150_ufsphy_hs_g4_pcs),
> +	},
> +	.clk_list		= sdm845_ufs_phy_clk_l,
> +	.num_clks		= ARRAY_SIZE(sdm845_ufs_phy_clk_l),
> +	.vreg_list		= qmp_ufs_vreg_l,
> +	.num_vregs		= ARRAY_SIZE(qmp_ufs_vreg_l),
> +	.reset_list		= qmp_ufs_reset_l,
> +	.num_resets		= ARRAY_SIZE(qmp_ufs_reset_l),
> +	.regs			= ufsphy_v4_regs_layout,
> +
> +	.no_pcs_sw_reset	= false,
> +};
> +
>   static const struct qmp_ufs_cfg sm8250_ufsphy_cfg = {
>   	.lanes			= 2,
>   
> @@ -1100,6 +1161,7 @@ static struct phy_ops qmp_ufs_ops = {
>   
>   static const struct udevice_id qmp_ufs_ids[] = {
>   	{ .compatible = "qcom,sdm845-qmp-ufs-phy", .data = (ulong)&sdm845_ufsphy_cfg },
> +	{ .compatible = "qcom,sm8150-qmp-ufs-phy", .data = (ulong)&sm8150_ufsphy_cfg },
>   	{ .compatible = "qcom,sm8250-qmp-ufs-phy", .data = (ulong)&sm8250_ufsphy_cfg },
>   	{ .compatible = "qcom,sm8550-qmp-ufs-phy", .data = (ulong)&sm8550_ufsphy_cfg },
>   	{ .compatible = "qcom,sm8650-qmp-ufs-phy", .data = (ulong)&sm8650_ufsphy_cfg },
> 
> ---
> base-commit: 2d21dd440e052bb2c8ccc9fa3137ab40c8f87f14
> change-id: 20241002-sm8150-qmp-phy-ddb990d1a1bc
> 
> Best regards,

Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>


More information about the U-Boot mailing list