[PATCH v2 15/18] arm64: dts: rockchip: Simplify network PHY connection on qnap-ts433

[Heiko Stuebner]

From: Uwe Kleine-König <ukleinek at debian.org>

While it requires to have the right phy driver loaded (i.e. motorcomm)
to make the phy asserting the right delays, this is generally the
preferred way to define the MAC <-> PHY connection.

Signed-off-by: Uwe Kleine-König <ukleinek at debian.org>
Reviewed-by: Andrew Lunn <andrew at lunn.ch>
Link: https://lore.kernel.org/r/20240304084612.711678-2-ukleinek@debian.org
Signed-off-by: Heiko Stuebner <heiko at sntech.de>

[ upstream commit: e8d45544f806f3b55c30345de84262cbb9504902 ]

(cherry picked from commit e0bbe061fd537bd7b113c53eb046bbcbf0e6597d)
---
 dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts b/dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts
index 6c4269b3d95..20e4fa6c185 100644
--- a/dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts
+++ b/dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts
@@ -198,15 +198,13 @@
 	assigned-clock-rates = <0>, <125000000>;
 	clock_in_out = "output";
 	phy-handle = <&rgmii_phy0>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac0_miim
 		     &gmac0_tx_bus2
 		     &gmac0_rx_bus2
 		     &gmac0_rgmii_clk
 		     &gmac0_rgmii_bus>;
-	rx_delay = <0x2f>;
-	tx_delay = <0x3c>;
 	status = "okay";
 };
 
-- 
2.45.2