[PATCH 2/3] board: rockchip: Add vdd_cpu reg fixup for RGXX3 Series
Chris Morgan
macroalpha82 at gmail.com
Mon Sep 16 23:01:36 CEST 2024
From: Chris Morgan <macromorgan at hotmail.com>
Some of the Powkiddy devices switched to using a different vendor for
the vdd_cpu regulator. Unfortunately the device does not have a new
revision to denote this, so users have no way of knowing in advance.
Add code to detect if a device is present at addresses 0x1c or 0x40 on
the i2c0 bus and update the devicetree if needed.
Signed-off-by: Chris Morgan <macromorgan at hotmail.com>
---
board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c | 147 +++++++++++++++++++++
1 file changed, 147 insertions(+)
diff --git a/board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c b/board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c
index 224019f9ba3..c1d1826fd14 100644
--- a/board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c
+++ b/board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c
@@ -43,6 +43,7 @@ struct rg3xx_model {
const char *board_name;
const char *fdtfile;
const bool detect_panel;
+ const bool detect_regulator;
const bool uart_con;
};
@@ -69,6 +70,7 @@ static const struct rg3xx_model rg3xx_model_details[] = {
/* Device is identical to RG353P. */
.fdtfile = DTB_DIR "rk3566-anbernic-rg353p.dtb",
.detect_panel = 1,
+ .detect_regulator = 0,
.uart_con = 1,
},
[RG353P] = {
@@ -77,6 +79,7 @@ static const struct rg3xx_model rg3xx_model_details[] = {
.board_name = "Anbernic RG353P",
.fdtfile = DTB_DIR "rk3566-anbernic-rg353p.dtb",
.detect_panel = 1,
+ .detect_regulator = 0,
.uart_con = 1,
},
[RG353V] = {
@@ -85,6 +88,7 @@ static const struct rg3xx_model rg3xx_model_details[] = {
.board_name = "Anbernic RG353V",
.fdtfile = DTB_DIR "rk3566-anbernic-rg353v.dtb",
.detect_panel = 1,
+ .detect_regulator = 0,
.uart_con = 1,
},
[RG503] = {
@@ -93,6 +97,7 @@ static const struct rg3xx_model rg3xx_model_details[] = {
.board_name = "Anbernic RG503",
.fdtfile = DTB_DIR "rk3566-anbernic-rg503.dtb",
.detect_panel = 0,
+ .detect_regulator = 0,
.uart_con = 1,
},
[RGB30] = {
@@ -101,6 +106,7 @@ static const struct rg3xx_model rg3xx_model_details[] = {
.board_name = "Powkiddy RGB30",
.fdtfile = DTB_DIR "rk3566-powkiddy-rgb30.dtb",
.detect_panel = 0,
+ .detect_regulator = 1,
.uart_con = 0,
},
[RK2023] = {
@@ -109,6 +115,7 @@ static const struct rg3xx_model rg3xx_model_details[] = {
.board_name = "Powkiddy RK2023",
.fdtfile = DTB_DIR "rk3566-powkiddy-rk2023.dtb",
.detect_panel = 0,
+ .detect_regulator = 1,
.uart_con = 0,
},
[RGARCD] = {
@@ -117,6 +124,7 @@ static const struct rg3xx_model rg3xx_model_details[] = {
.board_name = "Anbernic RG ARC-D",
.fdtfile = DTB_DIR "rk3566-anbernic-rg-arc-d.dtb",
.detect_panel = 0,
+ .detect_regulator = 0,
.uart_con = 1,
},
[RGB10MAX3] = {
@@ -125,6 +133,7 @@ static const struct rg3xx_model rg3xx_model_details[] = {
.board_name = "Powkiddy RGB10MAX3",
.fdtfile = DTB_DIR "rk3566-powkiddy-rgb10max3.dtb",
.detect_panel = 0,
+ .detect_regulator = 1,
.uart_con = 0,
},
/* Devices with duplicate ADC value */
@@ -134,6 +143,7 @@ static const struct rg3xx_model rg3xx_model_details[] = {
.board_name = "Anbernic RG353PS",
.fdtfile = DTB_DIR "rk3566-anbernic-rg353ps.dtb",
.detect_panel = 1,
+ .detect_regulator = 0,
.uart_con = 1,
},
[RG353VS] = {
@@ -142,6 +152,7 @@ static const struct rg3xx_model rg3xx_model_details[] = {
.board_name = "Anbernic RG353VS",
.fdtfile = DTB_DIR "rk3566-anbernic-rg353vs.dtb",
.detect_panel = 1,
+ .detect_regulator = 0,
.uart_con = 1,
},
[RGARCS] = {
@@ -150,6 +161,7 @@ static const struct rg3xx_model rg3xx_model_details[] = {
.board_name = "Anbernic RG ARC-S",
.fdtfile = DTB_DIR "rk3566-anbernic-rg-arc-s.dtb",
.detect_panel = 0,
+ .detect_regulator = 0,
.uart_con = 1,
},
};
@@ -172,6 +184,22 @@ static const struct rg353_panel rg353_panel_details[] = {
},
};
+struct powkiddy_regulators {
+ const u8 addr;
+ const char *regulator_compat;
+};
+
+static const struct powkiddy_regulators regulator_details[] = {
+ {
+ .addr = 0x1c,
+ .regulator_compat = "tcs,tcs4525",
+ },
+ {
+ .addr = 0x40,
+ .regulator_compat = "fcs,fan53555",
+ },
+};
+
/*
* Start LED very early so user knows device is on. Set color
* to red.
@@ -361,6 +389,44 @@ int rgxx3_detect_display(void)
return 0;
}
+/*
+ * Some of the Powkiddy devices switched the CPU regulator, but users
+ * are not able to determine this by looking at their hardware.
+ * Attempt to auto-detect this situation and fixup the device-tree.
+ */
+int rgxx3_detect_regulator(void)
+{
+ struct udevice *bus;
+ struct udevice *chip;
+ u8 val;
+ int ret;
+
+ /* Get the correct i2c bus (i2c0). */
+ ret = uclass_get_device_by_name(UCLASS_I2C,
+ "i2c at fdd40000", &bus);
+ if (ret)
+ return ret;
+
+ /*
+ * Check for all vdd_cpu regulators and read an arbitrary
+ * register to confirm it's present.
+ */
+ for (int i = 0; i < ARRAY_SIZE(regulator_details); i++) {
+ ret = i2c_get_chip(bus, regulator_details[i].addr,
+ 1, &chip);
+ if (ret)
+ return ret;
+
+ ret = dm_i2c_read(chip, 0, &val, 1);
+ if (!ret) {
+ env_set("vdd_cpu", regulator_details[i].regulator_compat);
+ break;
+ }
+ }
+
+ return 0;
+}
+
int rgxx3_read_board_id(void)
{
u32 adc_info;
@@ -485,6 +551,16 @@ int rk_board_late_init(void)
printf("Failed to detect panel type\n");
}
+ /*
+ * Skip vdd_cpu regulator detection if not needed. Warn but
+ * don't fail for errors in auto-detection of regulator.
+ */
+ if (rg3xx_model_details[gd->board_type].detect_regulator) {
+ ret = rgxx3_detect_regulator();
+ if (ret)
+ printf("Unable to detect vdd_cpu regulator\n");
+ }
+
end:
/* Turn off red LED and turn on orange LED. */
writel(GPIO_WRITEMASK(GPIO_C7 | GPIO_C6 | GPIO_C5) | GPIO_C6,
@@ -547,6 +623,71 @@ int rgxx3_panel_fixup(void *blob)
return 0;
}
+int rgxx3_regulator_fixup(void *blob)
+{
+ const struct powkiddy_regulators *vdd_cpu = NULL;
+ int node, ret, i;
+ char path[] = "/i2c at fdd40000/regulator at 00";
+ char name[] = "regulator at 00";
+ char *env;
+
+ env = env_get("vdd_cpu");
+ if (!env) {
+ printf("Can't get vdd_cpu env\n");
+ return -EINVAL;
+ }
+
+ /*
+ * Find the device we have in our tree, which may or may not
+ * be present.
+ */
+ for (i = 0; i < ARRAY_SIZE(regulator_details); i++) {
+ sprintf(path, "/i2c at fdd40000/regulator@%02x",
+ regulator_details[i].addr);
+ node = fdt_path_offset(blob, path);
+ if (node > 0)
+ break;
+
+ printf("Unable to find vdd_cpu\n");
+ return -ENODEV;
+ }
+
+ node = fdt_path_offset(blob, path);
+ if (!(node > 0)) {
+ printf("Can't find the vdd_cpu node\n");
+ return -ENODEV;
+ }
+
+ ret = fdt_node_check_compatible(blob, node, env);
+ if (ret < 0)
+ return -ENODEV;
+
+ /* vdd_cpu regulators match, return 0. */
+ if (!ret)
+ return 0;
+
+ /* Regulators don't match, search by first compatible value. */
+ for (i = 0; i < ARRAY_SIZE(regulator_details); i++) {
+ if (!strcmp(env, regulator_details[i].regulator_compat)) {
+ vdd_cpu = ®ulator_details[i];
+ break;
+ }
+ }
+
+ if (!vdd_cpu) {
+ printf("Unable to identify vdd_cpu by compat string\n");
+ return -ENODEV;
+ }
+
+ /* Set the compatible and reg with the auto-detected values */
+ fdt_setprop_string(blob, node, "compatible", vdd_cpu->regulator_compat);
+ fdt_setprop_u32(blob, node, "reg", vdd_cpu->addr);
+ sprintf(name, "regulator@%02x", vdd_cpu->addr);
+ fdt_set_name(blob, node, name);
+
+ return 0;
+}
+
int ft_board_setup(void *blob, struct bd_info *bd)
{
int ret;
@@ -562,6 +703,12 @@ int ft_board_setup(void *blob, struct bd_info *bd)
printf("Unable to update panel compat\n");
}
+ if (rg3xx_model_details[gd->board_type].detect_regulator) {
+ ret = rgxx3_regulator_fixup(blob);
+ if (ret)
+ printf("Unable to update vdd_cpu compat\n");
+ }
+
return 0;
}
--
2.34.1
More information about the U-Boot
mailing list