[PATCH v14 8/8] config: xilinx: Enable the SPI_ADVANCE config option
Venkatesh Yadav Abbarapu
venkatesh.abbarapu at amd.com
Thu Sep 26 06:55:08 CEST 2024
Enable the SPI_ADVANCE config option for all xilinx platforms, as
this is required for parallel-memories.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu at amd.com>
---
configs/xilinx_versal_net_virt_defconfig | 5 +++--
configs/xilinx_versal_virt_defconfig | 5 +++--
configs/xilinx_zynq_virt_defconfig | 7 ++++---
configs/xilinx_zynqmp_virt_defconfig | 14 +++++++-------
4 files changed, 17 insertions(+), 14 deletions(-)
diff --git a/configs/xilinx_versal_net_virt_defconfig b/configs/xilinx_versal_net_virt_defconfig
index 776af9ae29..1e09c0808e 100644
--- a/configs/xilinx_versal_net_virt_defconfig
+++ b/configs/xilinx_versal_net_virt_defconfig
@@ -14,6 +14,7 @@ CONFIG_SYS_LOAD_ADDR=0x8000000
CONFIG_SYS_MEMTEST_START=0x00000000
CONFIG_SYS_MEMTEST_END=0x00001000
CONFIG_REMAKE_ELF=y
+CONFIG_EFI_HTTP_BOOT=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_SYS_BOOTM_LEN=0x6400000
@@ -39,6 +40,7 @@ CONFIG_CMD_DFU=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
+CONFIG_MMC_SPEED_MODE_SET=y
CONFIG_CMD_MTD=y
CONFIG_CMD_SF_TEST=y
CONFIG_CMD_USB=y
@@ -58,7 +60,6 @@ CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_SQUASHFS=y
CONFIG_CMD_MTDPARTS=y
CONFIG_CMD_UBI=y
-CONFIG_MMC_SPEED_MODE_SET=y
CONFIG_PARTITION_TYPE_GUID=y
CONFIG_OF_BOARD=y
CONFIG_DTB_RESELECT=y
@@ -127,6 +128,7 @@ CONFIG_XILINX_UARTLITE=y
CONFIG_SOC_DEVICE=y
CONFIG_SOC_XILINX_VERSAL_NET=y
CONFIG_SPI=y
+CONFIG_SPI_ADVANCE=y
CONFIG_DM_SPI=y
CONFIG_CADENCE_QSPI=y
CONFIG_CADENCE_OSPI_VERSAL=y
@@ -151,4 +153,3 @@ CONFIG_VIRTIO_MMIO=y
CONFIG_VIRTIO_NET=y
CONFIG_VIRTIO_BLK=y
CONFIG_TPM=y
-CONFIG_EFI_HTTP_BOOT=y
diff --git a/configs/xilinx_versal_virt_defconfig b/configs/xilinx_versal_virt_defconfig
index 0d4591411e..d08e6af2de 100644
--- a/configs/xilinx_versal_virt_defconfig
+++ b/configs/xilinx_versal_virt_defconfig
@@ -17,6 +17,7 @@ CONFIG_SYS_LOAD_ADDR=0x8000000
CONFIG_SYS_MEMTEST_START=0x00000000
CONFIG_SYS_MEMTEST_END=0x00001000
CONFIG_REMAKE_ELF=y
+CONFIG_EFI_HTTP_BOOT=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_SYS_BOOTM_LEN=0x6400000
@@ -40,6 +41,7 @@ CONFIG_CMD_DFU=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
+CONFIG_MMC_SPEED_MODE_SET=y
CONFIG_CMD_MTD=y
CONFIG_CMD_SF_TEST=y
CONFIG_CMD_USB=y
@@ -59,7 +61,6 @@ CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_SQUASHFS=y
CONFIG_CMD_MTDPARTS=y
CONFIG_CMD_UBI=y
-CONFIG_MMC_SPEED_MODE_SET=y
CONFIG_PARTITION_TYPE_GUID=y
CONFIG_OF_BOARD=y
CONFIG_ENV_IS_NOWHERE=y
@@ -128,6 +129,7 @@ CONFIG_PL01X_SERIAL=y
CONFIG_XILINX_UARTLITE=y
CONFIG_SOC_XILINX_VERSAL=y
CONFIG_SPI=y
+CONFIG_SPI_ADVANCE=y
CONFIG_DM_SPI=y
CONFIG_CADENCE_QSPI=y
CONFIG_HAS_CQSPI_REF_CLK=y
@@ -154,4 +156,3 @@ CONFIG_VIRTIO_MMIO=y
CONFIG_VIRTIO_NET=y
CONFIG_VIRTIO_BLK=y
CONFIG_TPM=y
-CONFIG_EFI_HTTP_BOOT=y
diff --git a/configs/xilinx_zynq_virt_defconfig b/configs/xilinx_zynq_virt_defconfig
index b2921df1d0..417973d104 100644
--- a/configs/xilinx_zynq_virt_defconfig
+++ b/configs/xilinx_zynq_virt_defconfig
@@ -24,6 +24,8 @@ CONFIG_SYS_MEMTEST_END=0x00001000
CONFIG_REMAKE_ELF=y
CONFIG_SYS_CUSTOM_LDSCRIPT=y
CONFIG_SYS_LDSCRIPT="arch/arm/mach-zynq/u-boot.lds"
+CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
+CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_FIT_VERBOSE=y
@@ -64,6 +66,7 @@ CONFIG_CMD_FPGA_LOADP=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
+CONFIG_MMC_SPEED_MODE_SET=y
CONFIG_CMD_MTD=y
CONFIG_CMD_NAND_LOCK_UNLOCK=y
CONFIG_CMD_SF_TEST=y
@@ -81,7 +84,6 @@ CONFIG_CMD_MTDPARTS=y
CONFIG_CMD_MTDPARTS_SPREAD=y
CONFIG_CMD_MTDPARTS_SHOW_NET_SIZES=y
CONFIG_CMD_UBI=y
-CONFIG_MMC_SPEED_MODE_SET=y
CONFIG_OF_BOARD=y
CONFIG_OF_LIST="zynq-zc702 zynq-zc706 zynq-zc770-xm010 zynq-zc770-xm011 zynq-zc770-xm011-x16 zynq-zc770-xm012 zynq-zc770-xm013 zynq-cc108 zynq-microzed zynq-minized zynq-picozed zynq-zed zynq-zturn zynq-zturn-v5 zynq-zybo zynq-zybo-z7 zynq-dlc20-rev1.0"
CONFIG_ENV_IS_NOWHERE=y
@@ -142,6 +144,7 @@ CONFIG_ZYNQ_GEM=y
CONFIG_POWER_DOMAIN=y
CONFIG_ARM_DCC=y
CONFIG_ZYNQ_SERIAL=y
+CONFIG_SPI_ADVANCE=y
CONFIG_ZYNQ_SPI=y
CONFIG_ZYNQ_QSPI=y
CONFIG_USB=y
@@ -156,5 +159,3 @@ CONFIG_CI_UDC=y
CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_SYS_TIMER_COUNTS_DOWN=y
CONFIG_SPL_GZIP=y
-CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
-CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
diff --git a/configs/xilinx_zynqmp_virt_defconfig b/configs/xilinx_zynqmp_virt_defconfig
index 491206998d..19d4b2f692 100644
--- a/configs/xilinx_zynqmp_virt_defconfig
+++ b/configs/xilinx_zynqmp_virt_defconfig
@@ -23,6 +23,11 @@ CONFIG_AHCI=y
CONFIG_SYS_MEMTEST_START=0x00000000
CONFIG_SYS_MEMTEST_END=0x00001000
CONFIG_REMAKE_ELF=y
+CONFIG_EFI_SET_TIME=y
+CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
+CONFIG_EFI_CAPSULE_ON_DISK=y
+CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
+CONFIG_EFI_HTTP_BOOT=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
@@ -46,7 +51,6 @@ CONFIG_SPL_FS_LOAD_ARGS_NAME="u-boot.bin"
CONFIG_SPL_FPGA=y
CONFIG_SPL_OS_BOOT=y
CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x8000000
-CONFIG_SPL_RAM_SUPPORT=y
CONFIG_SPL_RAM_DEVICE=y
CONFIG_SPL_SPI_LOAD=y
CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000
@@ -71,6 +75,7 @@ CONFIG_CMD_PWM=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
+CONFIG_MMC_SPEED_MODE_SET=y
CONFIG_CMD_MTD=y
CONFIG_CMD_NAND_LOCK_UNLOCK=y
CONFIG_CMD_POWEROFF=y
@@ -101,7 +106,6 @@ CONFIG_CMD_MTDPARTS=y
CONFIG_CMD_MTDPARTS_SPREAD=y
CONFIG_CMD_MTDPARTS_SHOW_NET_SIZES=y
CONFIG_CMD_UBI=y
-CONFIG_MMC_SPEED_MODE_SET=y
CONFIG_PARTITION_TYPE_GUID=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_BOARD=y
@@ -204,6 +208,7 @@ CONFIG_XILINX_UARTLITE=y
CONFIG_ZYNQ_SERIAL=y
CONFIG_SOC_XILINX_ZYNQMP=y
CONFIG_SPI=y
+CONFIG_SPI_ADVANCE=y
CONFIG_ZYNQ_SPI=y
CONFIG_ZYNQMP_GQSPI=y
CONFIG_SYSRESET=y
@@ -239,8 +244,3 @@ CONFIG_VIRTIO_BLK=y
CONFIG_PANIC_HANG=y
CONFIG_TPM=y
CONFIG_SPL_GZIP=y
-CONFIG_EFI_SET_TIME=y
-CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
-CONFIG_EFI_CAPSULE_ON_DISK=y
-CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
-CONFIG_EFI_HTTP_BOOT=y
--
2.25.1
More information about the U-Boot
mailing list