[PATCH] rockchip: io-domain: Enable by default for all supported SoCs

[Anand Moon]

Hi Kever,

On Tue, 1 Apr 2025 at 09:11, Anand Moon <linux.amoon at gmail.com> wrote:
>
> Hi Kever,
>
> On Tue, 1 Apr 2025 at 08:30, Kever Yang <kever.yang at rock-chips.com> wrote:
> >
> > Hi Anand,
> >
> > On 2025/3/30 21:33, Anand Moon wrote:
> > > Hi Chen-Yu
> > >
> > > On Wed, 5 Feb 2025 at 07:39, Chen-Yu Tsai <wens at kernel.org> wrote:
> > >> From: Chen-Yu Tsai <wens at csie.org>
> > >>
> > >> The IO domain driver controls the I/O voltage for various pins,
> > >> MMC included.
> > >>
> > >> Enable it by default for all supported Rockchip SoCs.
> > >>
> > >> Signed-off-by: Chen-Yu Tsai <wens at csie.org>
> > > Reviewed-by: Anand Moon <linux.amoon at gmail.com>
> > >
> > > Can we enable following config default for all the boards
> > >
> > > CONFIG_MMC_DW=y
> > > CONFIG_MMC_DW_ROCKCHIP=y
> > > CONFIG_MMC_SDHCI=y
> > These two driver, SD card and eMMC, are board specific, not all the
> > board has enable all these two interface.
> >
> Ok,I thought it should reduce the configuration options on all the boards.
But can we implement this for each SoC, such as the RK3399 and RK3588?"

Thanks
-Anand