April 2025 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Tue Apr 1 00:16:52 CEST 2025
Ending: Wed Apr 30 23:54:47 CEST 2025
Messages: 3194

• [RESEND PATCH] clk: fix crash on clk_set_rate clean rate cache   Christian Marangi (Ansuel)
• [PATCH] env: Introduce support for MTD   Christian Marangi (Ansuel)
• [PATCH] firmware: scmi: smt: Interrupt communication enable   Alice Guo (OSS)
• 回复: [PATCH v8 01/19] firmware: scmi: smt: Interrupt communication enable   Alice Guo (OSS)
• 回复: [PATCH v8 02/19] pinctrl: nxp: add a pin controller driver based on SCMI pin control protocol   Alice Guo (OSS)
• 回复: [PATCH v8 02/19] pinctrl: nxp: add a pin controller driver based on SCMI pin control protocol   Alice Guo (OSS)
• 回复: 回复: [PATCH v8 02/19] pinctrl: nxp: add a pin controller driver based on SCMI pin control protocol   Alice Guo (OSS)
• [PATCH] firmware: scmi: support to manage SCMI protocol drivers with a linker-genetated array   Alice Guo (OSS)
• 回复: [PATCH] firmware: scmi: support to manage SCMI protocol drivers with a linker-genetated array   Alice Guo (OSS)
• 回复: [EXT] [PATCH] power: regulator: scmi: Move regulator subnode hack to scmi_regulator   Alice Guo (OSS)
• 回复: [PATCH v8 17/19] doc: imx: add document for i.MX95 Image Container Format   Alice Guo (OSS)
• 回复: 回复: [EXT] [PATCH] power: regulator: scmi: Move regulator subnode hack to scmi_regulator   Alice Guo (OSS)
• [PATCH RESEND] firmware: scmi: support to manage SCMI protocol drivers with a linker-genetated array   Alice Guo (OSS)
• [PATCH v9 00/20] imx: add i.MX95 support   Alice Guo (OSS)
• [PATCH v9 01/20] firmware: scmi: use scmi_proto_driver_get() function to get SCMI protocol driver   Alice Guo (OSS)
• [PATCH v9 02/20] pinctrl: nxp: add a pin controller driver based on SCMI pin control protocol   Alice Guo (OSS)
• [PATCH v9 03/20] firmware: scmi_agent: add SCMI pin control protocol support   Alice Guo (OSS)
• [PATCH v9 04/20] scmi_protocols: add SCMI misc protocol protocol_id and message_id for getting the ROM passover data   Alice Guo (OSS)
• [PATCH v9 05/20] scmi_protocols: add SCMI Performance domain management protocol message IDs   Alice Guo (OSS)
• [PATCH v9 06/20] clk: scmi: add the command CLOCK_PARENT_SET   Alice Guo (OSS)
• [PATCH v9 07/20] clk: scmi: check the clock state/parent/rate control permissions   Alice Guo (OSS)
• [PATCH v9 08/20] sandbox: add SCMI clock control permissions to sandbox   Alice Guo (OSS)
• [PATCH v9 09/20] scmi_protocols: update struct scmi_base_discover_list_protocols_out   Alice Guo (OSS)
• [PATCH v9 10/20] imx9: scmi: add i.MX95 SoC and clock related code   Alice Guo (OSS)
• [PATCH v9 11/20] cpu: imx95: add i.MX95 support   Alice Guo (OSS)
• [PATCH v9 12/20] spl: imx: use trampoline buffer to load images to secure region   Alice Guo (OSS)
• [PATCH v9 13/20] imx9: add i.MX95 Kconfig and Makefile   Alice Guo (OSS)
• [PATCH v9 14/20] imx: Kconfig: IMX8_ROMAPI is not configured for i.MX95   Alice Guo (OSS)
• [PATCH v9 15/20] binman: add a new entry type for packing DDR PHY firmware images   Alice Guo (OSS)
• [PATCH v9 16/20] tools: imx8image: add i.MX95 support   Alice Guo (OSS)
• [PATCH v9 17/20] imx: container: add V2X container support for i.MX95   Alice Guo (OSS)
• [PATCH v9 18/20] doc: imx: add document for i.MX95 Image Container Format   Alice Guo (OSS)
• [PATCH v9 19/20] imx95_evk: add i.MX95 19x19 EVK board basic support   Alice Guo (OSS)
• [PATCH v9 20/20] Makefile: add some files to CLEAN_FILES   Alice Guo (OSS)
• 回复: [PATCH RESEND] firmware: scmi: support to manage SCMI protocol drivers with a linker-genetated array   Alice Guo (OSS)
• 回复: [PATCH RESEND] firmware: scmi: support to manage SCMI protocol drivers with a linker-genetated array   Alice Guo (OSS)
• [PATCH v10 00/21] imx: add i.MX95 support   Alice Guo (OSS)
• [PATCH v10 01/21] firmware: scmi: support to manage SCMI protocol drivers with a linker-genetated array   Alice Guo (OSS)
• [PATCH v10 02/21] firmware: scmi: use scmi_proto_driver_get() function to get SCMI protocol driver   Alice Guo (OSS)
• [PATCH v10 03/21] pinctrl: nxp: add a pin controller driver based on SCMI pin control protocol   Alice Guo (OSS)
• [PATCH v10 04/21] firmware: scmi_agent: add SCMI pin control protocol support   Alice Guo (OSS)
• [PATCH v10 05/21] scmi_protocols: add SCMI misc protocol protocol_id and message_id for getting the ROM passover data   Alice Guo (OSS)
• [PATCH v10 06/21] scmi_protocols: add SCMI Performance domain management protocol message IDs   Alice Guo (OSS)
• [PATCH v10 07/21] clk: scmi: add the command CLOCK_PARENT_SET   Alice Guo (OSS)
• [PATCH v10 08/21] clk: scmi: check the clock state/parent/rate control permissions   Alice Guo (OSS)
• [PATCH v10 09/21] sandbox: add SCMI clock control permissions to sandbox   Alice Guo (OSS)
• [PATCH v10 10/21] scmi_protocols: update struct scmi_base_discover_list_protocols_out   Alice Guo (OSS)
• [PATCH v10 11/21] imx9: scmi: add i.MX95 SoC and clock related code   Alice Guo (OSS)
• [PATCH v10 12/21] cpu: imx95: add i.MX95 support   Alice Guo (OSS)
• [PATCH v10 13/21] spl: imx: use trampoline buffer to load images to secure region   Alice Guo (OSS)
• [PATCH v10 14/21] imx9: add i.MX95 Kconfig and Makefile   Alice Guo (OSS)
• [PATCH v10 15/21] imx: Kconfig: IMX8_ROMAPI is not configured for i.MX95   Alice Guo (OSS)
• [PATCH v10 16/21] binman: add a new entry type for packing DDR PHY firmware images   Alice Guo (OSS)
• [PATCH v10 17/21] tools: imx8image: add i.MX95 support   Alice Guo (OSS)
• [PATCH v10 18/21] imx: container: add V2X container support for i.MX95   Alice Guo (OSS)
• [PATCH v10 19/21] doc: imx: add document for i.MX95 Image Container Format   Alice Guo (OSS)
• [PATCH v10 20/21] imx95_evk: add i.MX95 19x19 EVK board basic support   Alice Guo (OSS)
• [PATCH v10 21/21] Makefile: add some files to CLEAN_FILES   Alice Guo (OSS)
• [PATCH v11 00/21] imx: add i.MX95 support   Alice Guo (OSS)
• [PATCH v11 01/21] firmware: scmi: support to manage SCMI protocol drivers with a linker-genetated array   Alice Guo (OSS)
• [PATCH v11 02/21] firmware: scmi: use scmi_proto_driver_get() function to get SCMI protocol driver   Alice Guo (OSS)
• [PATCH v11 03/21] pinctrl: nxp: add a pin controller driver based on SCMI pin control protocol   Alice Guo (OSS)
• [PATCH v11 04/21] firmware: scmi_agent: add SCMI pin control protocol support   Alice Guo (OSS)
• [PATCH v11 05/21] scmi_protocols: add SCMI misc protocol protocol_id and message_id for getting the ROM passover data   Alice Guo (OSS)
• [PATCH v11 06/21] scmi_protocols: add SCMI Performance domain management protocol message IDs   Alice Guo (OSS)
• [PATCH v11 07/21] clk: scmi: add the command CLOCK_PARENT_SET   Alice Guo (OSS)
• [PATCH v11 08/21] clk: scmi: check the clock state/parent/rate control permissions   Alice Guo (OSS)
• [PATCH v11 09/21] sandbox: add SCMI clock control permissions to sandbox   Alice Guo (OSS)
• [PATCH v11 10/21] scmi_protocols: update struct scmi_base_discover_list_protocols_out   Alice Guo (OSS)
• [PATCH v11 11/21] imx9: scmi: add i.MX95 SoC and clock related code   Alice Guo (OSS)
• [PATCH v11 12/21] cpu: imx95: add i.MX95 support   Alice Guo (OSS)
• [PATCH v11 13/21] spl: imx: use trampoline buffer to load images to secure region   Alice Guo (OSS)
• [PATCH v11 14/21] imx9: add i.MX95 Kconfig and Makefile   Alice Guo (OSS)
• [PATCH v11 15/21] imx: Kconfig: IMX8_ROMAPI is not configured for i.MX95   Alice Guo (OSS)
• [PATCH v11 16/21] binman: add a new entry type for packing DDR PHY firmware images   Alice Guo (OSS)
• [PATCH v11 17/21] tools: imx8image: add i.MX95 support   Alice Guo (OSS)
• [PATCH v11 18/21] imx: container: add V2X container support for i.MX95   Alice Guo (OSS)
• [PATCH v11 19/21] doc: imx: add document for i.MX95 Image Container Format   Alice Guo (OSS)
• [PATCH v11 20/21] imx95_evk: add i.MX95 19x19 EVK board basic support   Alice Guo (OSS)
• [PATCH v11 21/21] Makefile: add some files to CLEAN_FILES   Alice Guo (OSS)
• [PATCH] mmc: sdhci: Fix possible Synchronous Abort using PIO mode   Peng Fan (OSS)
• [PATCH] mmc: Exit from mmc_init() if mmc_complete_init() fails   Peng Fan (OSS)
• [PATCH v2] mmc: Simplify poll CD logic in case cyclic framework is enabled   Peng Fan (OSS)
• [PATCH] mmc: Optimize eMMC erase speed   Peng Fan (OSS)
• [PATCH] mmc: Avoid uniniting twice   Peng Fan (OSS)
• [PATCH] mmc: Kconfig: Correct dependencies SDHCI ADMA options   Peng Fan (OSS)
• [PATCH v3] mmc: mmc_boot: Support Sandisk and Micron eMMC BOOT/RPMB hardware partition resizing   Peng Fan (OSS)
• [PATCH 1/1] mmc: type 'Relatvie'   Peng Fan (OSS)
• [PATCH] power: regulator: scmi: Move regulator subnode hack to scmi_regulator   Peng Fan (OSS)
• [PATCH 0/2] mmc: omap_hsmmc: Restore the init_stream sequence   Peng Fan (OSS)
• [PATCH 0/3] efi: Add EFI Debug Support Table feature   Ying-Chun Liu (PaulLiu)
• [PATCH 1/3] efi: add EFI_SYSTEM_TABLE_POINTER for debug   Ying-Chun Liu (PaulLiu)
• [PATCH 2/3] efi: add EFI_DEBUG_IMAGE_INFO_TABLE for debug   Ying-Chun Liu (PaulLiu)
• [PATCH 3/3] efi: add EFI_DEBUG_IMAGE_INFO for debug   Ying-Chun Liu (PaulLiu)
• [PATCH v2 0/3] efi: Add EFI Debug Support Table feature   Ying-Chun Liu (PaulLiu)
• [PATCH v2 1/3] efi: add EFI_SYSTEM_TABLE_POINTER for debug   Ying-Chun Liu (PaulLiu)
• [PATCH v2 2/3] efi: add EFI_DEBUG_IMAGE_INFO_TABLE for debug   Ying-Chun Liu (PaulLiu)
• [PATCH v2 3/3] efi: add EFI_DEBUG_IMAGE_INFO for debug   Ying-Chun Liu (PaulLiu)
• [REGRESSION] [PATCH 1/1] mtd: mtdpart: Support MTD_SIZE_REMAINING with unallocated memory area   Weijie Gao (高惟杰)
• [PATCH] arm64: versal2: Update the number of DRAM banks to 36   Venkatesh Yadav Abbarapu
• [PATCH] amd: versal2: Add support for saving env based on bootmode   Venkatesh Yadav Abbarapu
• [PATCH] spi: cadence_qspi: Disable the DAC mode in indirect read   Venkatesh Yadav Abbarapu
• [PATCH 1/2] Dockerfile: install byacc   Leonard Anderweit
• [PATCH 2/2] CI: Build missing binman tools before binman tests   Leonard Anderweit
• [PATCH] doc: build: docker: Fix code-block formatting   Leonard Anderweit
• [PATCH] doc: build: docker: Fix code-block formatting   Leonard Anderweit
• [PATCH 2/2] CI: Build missing binman tools before binman tests   Leonard Anderweit
• [PATCH v2 1/2] doc: build: docker: Fix code highlighting syntax   Leonard Anderweit
• [PATCH v2 2/2] doc: build: docker: Use code-block for syntax highlighting   Leonard Anderweit
• [PATCH v1] efi_loader: Handle GD_FLG_SKIP_RELOC   Ilias Apalodimas
• [PATCH 1/2] efi_loader: Move public cert for capsules to .rodata   Ilias Apalodimas
• [PATCH 2/2] doc: Update authenticated capsules documentation   Ilias Apalodimas
• [PATCH] efi_loader: handle malloc() errors   Ilias Apalodimas
• [PATCH v1] efi_loader: Handle GD_FLG_SKIP_RELOC   Ilias Apalodimas
• [PATCH 2/4] mach-snapdragon: CapsuleUpdate: support all boot methods   Ilias Apalodimas
• [PATCH 00/12] lwIP sandbox tests   Ilias Apalodimas
• [PATCH] tpm: cr50: Support opening the TPM multiple times   Ilias Apalodimas
• RISC-V UEFI/ACPI on QEMU regression?   Ilias Apalodimas
• RISC-V UEFI/ACPI on QEMU regression?   Ilias Apalodimas
• RISC-V UEFI/ACPI on QEMU regression?   Ilias Apalodimas
• RISC-V UEFI/ACPI on QEMU regression?   Ilias Apalodimas
• [PATCH] acpi: Fix table length for QEMU   Ilias Apalodimas
• [PATCH] acpi: Fix table length for QEMU   Ilias Apalodimas
• [PATCH] acpi: Fix table length for QEMU   Ilias Apalodimas
• [PATCH] board: libre-computer: check interface before comparing it in set_dfu_alt_info()   Ilias Apalodimas
• [PATCH v2 1/1] configs: qemu-arm raise CONFIG_NR_DRAM_BANKS   Ilias Apalodimas
• [PATCH 1/1] efi_loader: stop network in EXIT_BOOT_SERVICES   Ilias Apalodimas
• [PATCH 1/2] acpi: select CONFIG_BLOBLIST   Ilias Apalodimas
• [PATCH 2/2] smbios: select CONFIG_BLOBLIST   Ilias Apalodimas
• [PATCH] efi_loader: Print extra information from the bootmgr   Ilias Apalodimas
• [PATCH] efi: Fix efiboot for payloads loaded from memory   Ilias Apalodimas
• [PATCH 1/1] efi_selftest: check executing in EL2   Ilias Apalodimas
• [PATCH v2] efi: Make FDT extra space configurable   Ilias Apalodimas
• [PATCH] efi_selftest: use do_bootefi_exec()   Ilias Apalodimas
• [PATCH] x86: efi_loader: Ensure the SMBIOS tables are sent via EFI   Ilias Apalodimas
• [PATCH v2 1/3] part: add part_get_info_cached() API   Ilias Apalodimas
• [PATCH 1/1] efi_selftest: check executing in EL2   Ilias Apalodimas
• [PATCH 02/16] efi_loader: efi_net: check efi_search_protocol return value   Ilias Apalodimas
• [PATCH 13/16] efi_selftest: Add selftest for counting EFI netdevices   Ilias Apalodimas
• [PATCH] efi_loader: Moved the generated ESL file to objtree   Ilias Apalodimas
• [PATCH v2] emulation: fdt: Allow using U-Boot's device tree with QEMU   Ilias Apalodimas
• [PATCH] net: make initr_net() invocation command line agnostic   Ilias Apalodimas
• [u-boot-test-hooks PATCH 1/1] travis-ci: qemu-riscv64_na: add a second network interface   Ilias Apalodimas
• Pull request for tpm-master-14042025   Ilias Apalodimas
• [PATCH v2] emulation: fdt: Allow using U-Boot's device tree with QEMU   Ilias Apalodimas
• [PATCH v1 2/2] qemu-arm64: enable UNIT_TEST   Ilias Apalodimas
• [PATCH v3 1/2] lib/uuid.c: use unique name for PARTITION_SYSTEM_GUID   Ilias Apalodimas
• [PATCH v2 2/3] part: efi: add GPT PTE cache used with part_get_info_cached() API   Ilias Apalodimas
• [PATCH] Docker, CI: Add vexpress_fvp / vexpress_fvp_bloblist support   Ilias Apalodimas
• [PATCH] efi_loader: bootbin: do not load an initrd if none is provided   Ilias Apalodimas
• [PATCH v2 1/2] efi_loader: bootbin: do not load an initrd if none is provided   Ilias Apalodimas
• [PATCH v2 2/2] efi_loader: fix typo initd_sz to initrd_sz   Ilias Apalodimas
• [PATCH] sunxi: enable MMU_PGPROT proper page table protection   Ilias Apalodimas
• [RFC 1/1] efi_loader: add dbginfodump.efi   Ilias Apalodimas
• [PATCH] uthread: doc: fix inline documentation   Ilias Apalodimas
• [PATCH v3 00/22] passage: Define a standard for firmware data flow   Ilias Apalodimas
• [PATCH v3 1/2] efi_loader: bootbin: do not load an initrd if none is provided   Ilias Apalodimas
• [PATCH v3 1/2] efi_loader: bootbin: do not load an initrd if none is provided   Ilias Apalodimas
• [PATCH 1/1] bootm: pass kernel load address not entry point for IH_OS_EFI   Ilias Apalodimas
• [PATCH 1/1] bootm: pass kernel load address not entry point for IH_OS_EFI   Ilias Apalodimas
• [PATCH 1/1] boot: let BOOTSTAGE_RECORD_COUNT default to 50   Ilias Apalodimas
• [PATCH 0/2] gpio: msm: fix special pins handling   Neil Armstrong
• [PATCH 1/2] gpio: msm: fix get_function return for special pins   Neil Armstrong
• [PATCH 2/2] gpio: msm: return correct value return for special output pins   Neil Armstrong
• [PATCH v4 5/6] button: qcom-pmic: prettify and standardise button labels   Neil Armstrong
• [PATCH v4 6/6] button: make button_get_by_label() case insensitive   Neil Armstrong
• [PATCH 2/4] mach-snapdragon: CapsuleUpdate: support all boot methods   Neil Armstrong
• [PATCH RFC/RFT 0/2] gpio: qcom: rewritte SPMI gpio driver from Linux driver   Neil Armstrong
• [PATCH RFC/RFT 1/2] gpio: qcom: add new driver for SPMI gpios   Neil Armstrong
• [PATCH RFC/RFT 2/2] gpio: qcom: move pm8550 gpio to new driver   Neil Armstrong
• [PATCH] configs: meson64: move DFU step at the end to give the board a chance to boot something on storage   Neil Armstrong
• [PATCH] board: libre-computer: check interface before comparing it in set_dfu_alt_info()   Neil Armstrong
• [PATCH 1/2] efi_loader: Move public cert for capsules to .rodata   Neil Armstrong
• [GIT PULL] Please pull u-boot-amlogic-20250404 into master   Neil Armstrong
• [PATCH] board: libre-computer: check interface before comparing it in set_dfu_alt_info()   Neil Armstrong
• [PATCH RFC/RFT 1/2] gpio: qcom: add new driver for SPMI gpios   Neil Armstrong
• [PATCH 3/7] mmc: msm_sdhci: handle bulk clock initialization error   Neil Armstrong
• [PATCH 3/7] mmc: msm_sdhci: handle bulk clock initialization error   Neil Armstrong
• [PATCH 02/13] board: dragonboard410c: Fix RAM size   Neil Armstrong
• [PATCH 04/13] board: dragonboard410c: Drop UNSTUFF_BITS() macro   Neil Armstrong
• [PATCH 06/13] board: dragonboard410c: Drop unused linux_image   Neil Armstrong
• [PATCH 07/13] board: dragonboard410c: Use dynamically allocated load addresses   Neil Armstrong
• [PATCH 08/13] board: dragonboard410c: Fix counter frequency   Neil Armstrong
• [PATCH 09/13] board: dragonboard410c: Enable RTL8152 ethernet   Neil Armstrong
• [PATCH 10/13] board: dragonboard410c: Use BOOTSTD instead of DISTRO_DEFAULTS   Neil Armstrong
• [PATCH 11/13] board: dragonboard410c: Enable support for Android boot images   Neil Armstrong
• [PATCH 12/13] board: dragonboard410c: Use button_cmd instead of custom code   Neil Armstrong
• [PATCH 13/13] board: dragonboard410c: Update maintainers   Neil Armstrong
• [PATCH 03/13] board: dragonboard410c: Fix BD address   Neil Armstrong
• [PATCH 01/13] mach-snapdragon: Fix EL2 boot on DragonBoard 410c   Neil Armstrong
• [PATCH 05/13] board: dragonboard410c: Drop reflash functionality   Neil Armstrong
• [PATCH 11/13] board: dragonboard410c: Enable support for Android boot images   Neil Armstrong
• [PATCH v2 0/3] part_efi: cache last scanned GPT for next partition   Neil Armstrong
• [PATCH v2 1/3] part: add part_get_info_cached() API   Neil Armstrong
• [PATCH v2 2/3] part: efi: add GPT PTE cache used with part_get_info_cached() API   Neil Armstrong
• [PATCH v2 3/3] block: use part_get_info_cached() API when scanning partitions   Neil Armstrong
• [PATCH v2 1/3] part: add part_get_info_cached() API   Neil Armstrong
• [PATCH v2 2/3] part: efi: add GPT PTE cache used with part_get_info_cached() API   Neil Armstrong
• [PATCH 3/6] mach-snapdragon: of_fixup: skip disabled USB nodes   Neil Armstrong
• [PATCH 4/6] clk/qcom: qcm2290: show clock name in set_rate()   Neil Armstrong
• [PATCH 5/6] mach-snapdragon: of_fixup: set dr_mode for RB1/2 boards   Neil Armstrong
• [PATCH 6/6] pinctrl: qcom: qcm2290: fix off by 1 in pin_count   Neil Armstrong
• [PATCH] pinctrl: qcom: handle reserved ranges   Neil Armstrong
• [PATCH 1/6] event: signal when livetree has been built   Neil Armstrong
• [PATCH 2/6] mach-snapdragon: use EVT_OF_LIVE_INIT to apply DT fixups   Neil Armstrong
• [PATCH v2 2/8] mach-snapdragon: use EVT_OF_LIVE_INIT to apply DT fixups   Neil Armstrong
• [PATCH v2 1/8] event: signal when livetree has been built   Neil Armstrong
• [PATCH v2 4/8] mach-snapdragon: of_fixup: remove confusing log message   Neil Armstrong
• [PATCH v2 5/8] mach-snapdragon: of_fixup: update comment   Neil Armstrong
• [PATCH 2/2] ARM: mach-meson: use livetree by default   Neil Armstrong
• [PATCH] watchdog: qcom: introduce qcom-wdt driver   Neil Armstrong
• [PATCH RFT v2 0/3] fastboot: add support for generic block flashing   Neil Armstrong
• [PATCH 0/6] clk: qcom: apq8016: Clock fixes for U-Boot v2025.07   Neil Armstrong
• [PATCH v3] watchdog: qcom: introduce qcom-wdt driver   Neil Armstrong
• [PATCH RFT v2 1/3] fastboot: blk: introduce fastboot block flashing support   Neil Armstrong
• [PATCH] MAINTAINERS: Update email of Stefano Babic   Stefano Babic
• [PATCH] imx: mx51evk: drop Stefano Babic from MAINTAINERS   Stefano Babic
• [PATCH] net: ravb: Fix RX error handling   Paul Barker
• [PATCH v2 2/4] net: ravb: Add optional reset deassertion   Paul Barker
• [PATCH v2 3/4] net: ravb: Add RZ/G2L Support   Paul Barker
• [PATCH] configs: versal: Fix initial stack pointer   Padmarao Begari
• [PATCH] board: xilinx: Store board info data in data section   Padmarao Begari
• [PATCH 0/2] arm64: versal2: Read an eeprom   Padmarao Begari
• [PATCH 1/2] arm64: versal2: Remove dtb reselect and multi dtb   Padmarao Begari
• [PATCH 2/2] board: amd: Read an eeprom after relocation   Padmarao Begari
• [PATCH 3/5] arm64: versal: fix dfu alt buffer clearing   Begari, Padmarao
• [PATCH 4/5] xilinx: zynq: fix dfu alt buffer clearing   Begari, Padmarao
• [PATCH 5/5] arm64: zynqmp: fix dfu alt buffer clearing   Begari, Padmarao
• [PATCH 3/3] arm: dts: am335x: Add nodes for lcdc, panel and backlight   Sukrut Bellary
• [PATCH 0/3] Add support for eCAP PWM and LCD pin mux   Sukrut Bellary
• [PATCH 1/3] pwm: ti: am33xx: Enable Auxiliary PWM using eCAP   Sukrut Bellary
• [PATCH 2/3] pwm: ti: am33xx: Fix build warnings in dev_dbg()   Sukrut Bellary
• [PATCH 3/3] board: ti: am335x: Enable eCAP0 PWM and LCD pin muxing   Sukrut Bellary
• [PATCH v2 0/6] Support NT35510 panel controller on stm32f769i-disco board   Dario Binacchi
• [PATCH v2 1/6] ARM: dts: stm32: add DSI support on stm32f769   Dario Binacchi
• [PATCH v2 2/6] ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f769-disco   Dario Binacchi
• [PATCH v2 3/6] ARM: dts: stm32: add display support on stm32f769-disco   Dario Binacchi
• [PATCH v2 4/6] ARM: dts: add stm32f769-disco-mb1166-reva09   Dario Binacchi
• [PATCH v2 5/6] video: support FRIDA FRD400B25025-A-CTK   Dario Binacchi
• [PATCH v2 6/6] configs: stm32f769-disco: support FRD400B25025-A-CTK display   Dario Binacchi
• [PATCH] doc: release_cycle: fix next release version   Dario Binacchi
• [PATCH] bootstd: android: avoid possible null pointer dereference   Gary Bisson
• [PATCH v3 00/17] Support to run U-Boot on sc7180 Trogdor Chromebooks   Stephen Boyd
• [PATCH v3 01/17] bootstd: cros: Return negative error code   Stephen Boyd
• [PATCH v3 02/17] clk: qcom: Add driver for sc7180   Stephen Boyd
• [PATCH v3 03/17] clk/stub: add sc7180-rpmh clock   Stephen Boyd
• [PATCH v3 04/17] pinctrl: qcom: Add driver for sc7180   Stephen Boyd
• [PATCH v3 05/17] spi: Add Qualcomm GENI SPI driver   Stephen Boyd
• [PATCH v3 06/17] coreboot: Move coreboot logic out of x86 to a generic place   Stephen Boyd
• [PATCH v3 07/17] coreboot: Locate table earlier than arch_cpu_init()   Stephen Boyd
• [PATCH v3 08/17] arm: Support running U-Boot as a coreboot payload on ARM64   Stephen Boyd
• [PATCH v3 09/17] cmd/cbsysinfo: Skip the CMOS 'option_table' when not present   Stephen Boyd
• [PATCH v3 10/17] cmd/cbsysinfo: Allow on ARM as well   Stephen Boyd
• [PATCH v3 11/17] coreboot: Parse sku_id/fw_config from coreboot tables   Stephen Boyd
• [PATCH v3 12/17] pstore: Add pstore address from coreboot tables   Stephen Boyd
• [PATCH v3 13/17] coreboot: Add /firmware/coreboot node to DT   Stephen Boyd
• [PATCH v3 14/17] coreboot: Move timestamp parsing to generic place   Stephen Boyd
• [PATCH v3 15/17] mach-snapdragon: Support booting as a coreboot payload   Stephen Boyd
• [PATCH v3 16/17] cmd: ximg: Support LZO compressed images   Stephen Boyd
• [PATCH v3 17/17] cmd: ximg: Support LZ4 compressed images   Stephen Boyd
• [PATCH] mach-k3: common_fdt: Fix Label Issue   Bryan Brattlof
• [PATCH] efi_selftest: remove un-needed NULL checks   Bryan Brattlof
• bootcount support for AM62 RTCSS   Bryan Brattlof
• [PATCH] net: dhcpv6: remove excluded middle expression   Bryan Brattlof
• [PATCH] mips: octeon: remove unused middle expression   Bryan Brattlof
• [PATCH] arm: mach-k3: am62ax: fix MCU_CLKOUT0 parent clock mux   Bryan Brattlof
• bootcount support for AM62 RTCSS   Bryan Brattlof
• [PATCH v1] arm: mach-k3: am62px: Fix MCU_CLKOUT0 parent clock mux   Bryan Brattlof
• [PATCH] configs: am65x_evm_a53: convert to a standard boot flow   Bryan Brattlof
• [PATCH 0/5] More MMC fixes   Bryan Brattlof
• [PATCH 0/2] arm: mach-k3: remove some firewalls left over by ROM   Bryan Brattlof
• [PATCH 1/2] arm: mach-k3: support disabling a single firewall region   Bryan Brattlof
• [PATCH 2/2] arm: mach-k3: am625: remove any firewalls ROM has configured for HSRAM   Bryan Brattlof
• [PATCH v3] mach-k3: common_fdt: Move carveout struct   Bryan Brattlof
• [PATCH] arm: mach-k3: use CFG_MAX_MEM_SIZE   Bryan Brattlof
• [PATCH 0/9] board: beagle: beagley-ai: Cleanups and stdboot   Bryan Brattlof
• [PATCH] arm: dts: k3: binman: Fix DM firmware selection   Bryan Brattlof
• [PATCH] arm: dts: k3: require mandatory firmware in binman   Bryan Brattlof
• [PATCH 1/3] arm: mach-k3: am62a: Fixup CPU core, DSS, CAN-FD and Video-codec nodes in fdt   Bryan Brattlof
• [PATCH 0/3] Add fdt-fixups for AM62A variants   Bryan Brattlof
• [PATCH v1] arm: add call to cleanup_before_linux for go command   Bryan Brattlof
• [PATCH v1] arm: add call to cleanup_before_linux for go command   Bryan Brattlof
• [PATCH v1] arm: add call to cleanup_before_linux for go command   Bryan Brattlof
• Re: U-Boot interferes with initrd binary — Revert "efi: Correct smbios-table installation" ?   Michael Brown
• Re: U-Boot interferes with initrd binary — Revert "efi: Correct smbios-table installation" ?   Michael Brown
• Re: U-Boot interferes with initrd binary — Revert "efi: Correct smbios-table installation" ?   Michael Brown
• Re: U-Boot interferes with initrd binary — Revert "efi: Correct smbios-table installation" ?   Michael Brown
• [PATCH 1/1] efi_loader: stop network in EXIT_BOOT_SERVICES   Michael Brown
• [PATCH v3 1/8] configs: add jh7110-deepcomputing-fml13v01 to VF2 defconfig   Matthias Brugger
• [PATCH v3 2/8] riscv: dts: jh7110: add DeepComputing FML13V01 device-tree   Matthias Brugger
• [PATCH v3 3/8] board: starfive: DeepComputing FML13V01 fdt selection   Matthias Brugger
• [PATCH v3 4/8] board: starfive: spl: support DeepComputing FML13V01   Matthias Brugger
• [PATCH] configs: rpi: set NR_DRAM_BANKS to 8 to accommodate RAM on 16GB models   Matthias Brugger
• [RESEND PATCH 1/2] config_distro_bootcmd: make possible to substitute 'part list' in distro_bootcmd   Patrice CHOTARD
• [RESEND PATCH 2/2] ARM: stm32: env: Enable scan and start for AB schema on STM32MP15 DHSOM   Patrice CHOTARD
• [PATCH v2 5/6] video: support FRIDA FRD400B25025-A-CTK   Patrice CHOTARD
• [PATCH] stm32mp: Add nvram driver   Patrice CHOTARD
• [PATCH 2/5] board: st: common: fix dfu alt buffer clearing   Patrice CHOTARD
• [PATCH 13/13] ARM: stm32mp: add RIFSC system bus driver for STM32MP25   Patrice CHOTARD
• [PATCH 07/13] configs: stm32: introduce stm32mp15-odyssey_defconfig   Patrice CHOTARD
• [PATCH 09/13] ARM: stm32mp: add ETZPC system bus driver for STM32MP1   Patrice CHOTARD
• [PATCH 08/13] stm32mp1: clk: Update index for DSI gate   Patrice CHOTARD
• [PATCH v2 01/13] ARM: dts: sti: convert stih410-b2260 board to OF_UPSTREAM   Patrice CHOTARD
• [PATCH v2 02/13] ARM: dts: stm32: convert stm23h7 boards to OF_UPSTREAM   Patrice CHOTARD
• [PATCH v2 03/13] ARM: dts: stm32: convert stm23f7 boards to OF_UPSTREAM   Patrice CHOTARD
• [PATCH v2 04/13] ARM: dts: stm32: convert stm23f4 boards to OF_UPSTREAM   Patrice CHOTARD
• [PATCH v2 05/13] ARM: dts: stm32: convert stm32mp13 board to OF_UPSTREAM   Patrice CHOTARD
• [PATCH v2 06/13] ARM: dts: stm32: convert stm32mp15 board to OF_UPSTREAM   Patrice CHOTARD
• [PATCH v2 07/13] configs: stm32: introduce stm32mp15-odyssey_defconfig   Patrice CHOTARD
• [PATCH v2 08/13] clk: stm32mp1: fix DSI clock setting   Patrice CHOTARD
• [PATCH v2 09/13] ARM: stm32mp: add ETZPC system bus driver for STM32MP1   Patrice CHOTARD
• [PATCH v2 10/13] ARM: dts: stm32: add ETZPC as a system bus for STM32MP1x boards   Patrice CHOTARD
• [PATCH v2 11/13] stm32mp: fdt: remove ETZPC peripheral cleanup   Patrice CHOTARD
• [PATCH v2 12/13] ARM: dts: stm32: convert stm32mp2 board to OF_UPSTREAM   Patrice CHOTARD
• [PATCH v2 13/13] ARM: stm32mp: add RIFSC system bus driver for STM32MP25   Patrice CHOTARD
• [PATCH v2 01/22] configs: stm32mp25: add MMC support   Patrice CHOTARD
• [PATCH v2 02/22] configs: stm32mp25: add bootcmd for stm32mp25 platform   Patrice CHOTARD
• [PATCH v2 03/22] arm: stm32mp: add boot_mode support for STM32MP25   Patrice CHOTARD
• [PATCH v2 04/22] board: st: stm32mp2: add env_get_location()   Patrice CHOTARD
• [PATCH v2 05/22] board: st: stm32mp2: add mmc_get_env_dev()   Patrice CHOTARD
• [PATCH v2 06/22] ARM: dts: stm32: add "u-boot, mmc-env-partition" for stm32mp257f-ev1-u-boot   Patrice CHOTARD
• [PATCH v2 07/22] board: st: stm32mp2: add led support   Patrice CHOTARD
• [PATCH v2 08/22] board: st: stm32mp2: add user button support   Patrice CHOTARD
• [PATCH v2 09/22] configs: stm32mp25: add support of NAND and NOR boot   Patrice CHOTARD
• [PATCH v2 10/22] board: st: stm32mp2: change bootcmd for ST boards   Patrice CHOTARD
• [PATCH v2 11/22] configs: stm32mp25: add USB host boot support   Patrice CHOTARD
• [PATCH v2 12/22] configs: stm32mp25: add PXE boot support   Patrice CHOTARD
• [PATCH v2 13/22] ARM: dts: stm32: add sdmmc1 fixed clock for stm32mp257f-ev1-u-boot   Patrice CHOTARD
• [PATCH v2 14/22] arm: stm32mp: increase EARLY_TLB_SIZE to 0x10000   Patrice CHOTARD
• [PATCH v2 15/22] arm: stm32mp: disable console for UART serial boot   Patrice CHOTARD
• [PATCH v2 16/22] arm: stm32mp: implement new STM32MP25 revision ID system   Patrice CHOTARD
• [PATCH v2 17/22] arm: stm32mp: fix package IDs for stm32mp25   Patrice CHOTARD
• [PATCH v2 18/22] arm: stm32mp: cmd_stm32key: update command for stm32mp25x   Patrice CHOTARD
• [PATCH v2 19/22] arm: stm32mp: add helper function stm32mp_is_closed()   Patrice CHOTARD
• [PATCH v2 20/22] arm: stm32mp: stm32prog: PTA BSEC is not supported on closed device   Patrice CHOTARD
• [PATCH v2 21/22] arm: stm32mp: stm32prog: add support rootfs-a for OTA   Patrice CHOTARD
• [PATCH v2 22/22] configs: stm32mp25: enable DISTRO_DEFAULT and BOOTCOMMAND   Patrice CHOTARD
• [PULL] Pull request for u-boot master / v2025.07 = u-boot-stm32-20250428   Patrice CHOTARD
• [RFC PATCH 1/2 v2] tools: binman: control.py: Propagate bootph-* properties to supernodes   Manorit Chawdhry
• [PATCH v1 1/2] arm: socfpga: soc64: Update reset manager registers for F2S bridge   Chee, Tien Fong
• [PATCH v1 2/2] arm: socfpga: soc64: Enable F2S bridge reset support   Chee, Tien Fong
• [PATCH v1] configs: agilex5: Enable Marvell PHY driver   Chee, Tien Fong
• [PATCH] configs: Enable partial reconfiguration support for Stratix10   Chee, Tien Fong
• [PATCH] reset: socfpga: release more A10 peripherals out of reset   Chee, Tien Fong
• [CAD QSPI v1] spi: cadence-qspi: Add disable STIG mode quikrs.   Chee, Tien Fong
• [PATCH v1] configs: agilex5: Restore fixed bloblist   Chee, Tien Fong
• [PATCH v1] arch: arm: dts: agilex5: Set SDIO_SEL GPIO pin as output   Chee, Tien Fong
• [PATCH v1 1/5] arm: socfpga: agilex5: Add MMU mapping region   Chee, Tien Fong
• [PATCH v1 2/5] arm: socfpga: socfpga_soc64: Enable LMB_ARCH_MEM_MAP   Chee, Tien Fong
• [PATCH v1 3/5] arm: dts: agilex5: Update CCU configuration   Chee, Tien Fong
• [PATCH v1 4/5] ddr: altera: agilex5: LPDDRs in-line ECC support   Chee, Tien Fong
• [PATCH v1 5/5] ddr: altera: iossm: Enhance debug information for ECC errors   Chee, Tien Fong
• [PATCH v1] arm: socfpga: soc64: Update SoC64 CPU info   Chee, Tien Fong
• Pull request: SoCFPGA changes for u-boot-socfpga-next-20250422   Chee, Tien Fong
• [CAD QSPI v2] spi: cadence-qspi: Add disable STIG mode quikrs.   Chee, Tien Fong
• [PATCH] drivers: spi: Fix data loss issue in QSPI   Chee, Tien Fong
• [PATCH] cmd: Kconfig: Fix typos   Aristo Chen
• [PATCH] doc: remove duplicated "commands"   Aristo Chen
• [PATCH] doc: arch: arm64: fix typos   Aristo Chen
• [PATCH] doc: fix typos   Aristo Chen
• [PATCH] doc: fix typo   Aristo Chen
• [PATCH] bootm: improve error message when gzip decompression buffer is too small   Aristo Chen
• [PATCH] bootm: improve error message when gzip decompression buffer is too small   Aristo Chen
• [PATCH v2 1/1] bootm: improve error message when gzip decompression buffer is too small   Aristo Chen
• [PATCH v1] MAINTAINERS: Add USB driver file to visionfive2 maintain files.   Minda Chen
• [PATCH v2] MAINTAINERS: visionfive2: Add match N: starfive pattern   Minda Chen
• [PATCH v1 1/3] riscv: image: Add new image type for RV64   Mayuresh Chitale
• [PATCH v1 3/3] booti/bootm: riscv: Verify image arch type   Mayuresh Chitale
• [PATCH v2 0/3] Risc-V 32 bit/64 bit images   Mayuresh Chitale
• [PATCH v2 1/3] riscv: image: Add new image type for RV64   Mayuresh Chitale
• [PATCH v2 2/3] riscv: Select appropriate image type   Mayuresh Chitale
• [PATCH v2 3/3] booti/bootm: riscv: Verify image arch type   Mayuresh Chitale
• [PATCH] riscv: insn-def.h: Fix header guard   Mayuresh Chitale
• [PATCH 00/13] Enable OF_UPSTREAM for STM32 and STi platforms   Patrice Chotard
• [PATCH 01/13] ARM: dts: sti: convert stih410-b2260 board to OF_UPSTREAM   Patrice Chotard
• [PATCH 02/13] ARM: dts: stm32: convert stm23h7 boards to OF_UPSTREAM   Patrice Chotard
• [PATCH 03/13] ARM: dts: stm32: convert stm23f7 boards to OF_UPSTREAM   Patrice Chotard
• [PATCH 04/13] ARM: dts: stm32: convert stm23f4 boards to OF_UPSTREAM   Patrice Chotard
• [PATCH 05/13] ARM: dts: stm32: convert stm32mp13 board to OF_UPSTREAM   Patrice Chotard
• [PATCH 06/13] ARM: dts: stm32: convert stm32mp15 board to OF_UPSTREAM   Patrice Chotard
• [PATCH 07/13] configs: stm32: introduce stm32mp15-odyssey_defconfig   Patrice Chotard
• [PATCH 08/13] stm32mp1: clk: Update index for DSI gate   Patrice Chotard
• [PATCH 09/13] ARM: stm32mp: add ETZPC system bus driver for STM32MP1   Patrice Chotard
• [PATCH 10/13] ARM: dts: stm32: add ETZPC as a system bus for STM32MP1x boards   Patrice Chotard
• [PATCH 11/13] stm32mp: fdt: remove ETZPC peripheral cleanup   Patrice Chotard
• [PATCH 12/13] ARM: dts: stm32: convert stm32mp2 board to OF_UPSTREAM   Patrice Chotard
• [PATCH 13/13] ARM: stm32mp: add RIFSC system bus driver for STM32MP25   Patrice Chotard
• [PATCH 0/6] configs: stm32: Fix console cmdline for stm32 MCU's board   Patrice Chotard
• [PATCH 1/6] configs: stm32f769-disco_spl: Fix console cmdline   Patrice Chotard
• [PATCH 2/6] configs: stm32f746-disco_spl: Fix console cmdline   Patrice Chotard
• [PATCH 3/6] configs: stm32f769-disco: Fix console cmdline   Patrice Chotard
• [PATCH 4/6] configs: stm32f729-discovery: Fix console cmdline   Patrice Chotard
• [PATCH 5/6] configs: stm32746-eval_spl: Fix console cmdline   Patrice Chotard
• [PATCH 6/6] configs: stm32746-eval: Fix console cmdline   Patrice Chotard
• [PATCH] net: dwc_eth_qos: add support of stm32mp2 platform   Patrice Chotard
• [PATCH] stm32mp: Add nvram driver   Patrice Chotard
• [PATCH v2] stm32mp: Add tamp_nvram driver   Patrice Chotard
• [PATCH v2 00/13] Enable OF_UPSTREAM for STM32 and STi platforms   Patrice Chotard
• [PATCH v2 01/13] ARM: dts: sti: convert stih410-b2260 board to OF_UPSTREAM   Patrice Chotard
• [PATCH v2 02/13] ARM: dts: stm32: convert stm23h7 boards to OF_UPSTREAM   Patrice Chotard
• [PATCH v2 03/13] ARM: dts: stm32: convert stm23f7 boards to OF_UPSTREAM   Patrice Chotard
• [PATCH v2 04/13] ARM: dts: stm32: convert stm23f4 boards to OF_UPSTREAM   Patrice Chotard
• [PATCH v2 05/13] ARM: dts: stm32: convert stm32mp13 board to OF_UPSTREAM   Patrice Chotard
• [PATCH v2 06/13] ARM: dts: stm32: convert stm32mp15 board to OF_UPSTREAM   Patrice Chotard
• [PATCH v2 07/13] configs: stm32: introduce stm32mp15-odyssey_defconfig   Patrice Chotard
• [PATCH v2 08/13] clk: stm32mp1: fix DSI clock setting   Patrice Chotard
• [PATCH v2 09/13] ARM: stm32mp: add ETZPC system bus driver for STM32MP1   Patrice Chotard
• [PATCH v2 10/13] ARM: dts: stm32: add ETZPC as a system bus for STM32MP1x boards   Patrice Chotard
• [PATCH v2 11/13] stm32mp: fdt: remove ETZPC peripheral cleanup   Patrice Chotard
• [PATCH v2 12/13] ARM: dts: stm32: convert stm32mp2 board to OF_UPSTREAM   Patrice Chotard
• [PATCH v2 13/13] ARM: stm32mp: add RIFSC system bus driver for STM32MP25   Patrice Chotard
• [PATCH 00/21] arm: stm32mp: STM32MP25 machine update   Patrice Chotard
• [PATCH 01/21] configs: stm32mp25: add MMC support   Patrice Chotard
• [PATCH 02/21] configs: stm32mp25: add bootcmd for stm32mp25 platform   Patrice Chotard
• [PATCH 03/21] arm: stm32mp: add boot_mode support for STM32MP25   Patrice Chotard
• [PATCH 04/21] board: st: stm32mp2: add env_get_location()   Patrice Chotard
• [PATCH 05/21] board: st: stm32mp2: add mmc_get_env_dev()   Patrice Chotard
• [PATCH 06/21] ARM: dts: stm32: add "u-boot, mmc-env-partition" for stm32mp257f-ev1-u-boot   Patrice Chotard
• [PATCH 07/21] board: st: stm32mp2: add led support   Patrice Chotard
• [PATCH 08/21] board: st: stm32mp2: add user button support   Patrice Chotard
• [PATCH 09/21] configs: stm32mp25: add support of NAND and NOR boot   Patrice Chotard
• [PATCH 10/21] board: st: stm32mp2: change bootcmd for ST boards   Patrice Chotard
• [PATCH 11/21] configs: stm32mp25: add USB host boot support   Patrice Chotard
• [PATCH 12/21] configs: stm32mp25: add PXE boot support   Patrice Chotard
• [PATCH 13/21] ARM: dts: stm32: add sdmmc1 fixed clock for stm32mp257f-ev1-u-boot   Patrice Chotard
• [PATCH 14/21] arm: stm32mp: increase EARLY_TLB_SIZE to 0x10000   Patrice Chotard
• [PATCH 15/21] arm: stm32mp: disable console for UART serial boot   Patrice Chotard
• [PATCH 16/21] arm: stm32mp: implement new STM32MP25 revision ID system   Patrice Chotard
• [PATCH 17/21] arm: stm32mp: fix package IDs for stm32mp25   Patrice Chotard
• [PATCH 18/21] arm: stm32mp: cmd_stm32key: update command for stm32mp25x   Patrice Chotard
• [PATCH 19/21] arm: stm32mp: add helper function stm32mp_is_closed()   Patrice Chotard
• [PATCH 20/21] arm: stm32mp: stm32prog: PTA BSEC is not supported on closed device   Patrice Chotard
• [PATCH 21/21] arm: stm32mp: stm32prog: add support rootfs-a for OTA   Patrice Chotard
• [PATCH v2 00/22] arm: stm32mp: STM32MP25 machine update   Patrice Chotard
• [PATCH v2 01/22] configs: stm32mp25: add MMC support   Patrice Chotard
• [PATCH v2 02/22] configs: stm32mp25: add bootcmd for stm32mp25 platform   Patrice Chotard
• [PATCH v2 03/22] arm: stm32mp: add boot_mode support for STM32MP25   Patrice Chotard
• [PATCH v2 04/22] board: st: stm32mp2: add env_get_location()   Patrice Chotard
• [PATCH v2 05/22] board: st: stm32mp2: add mmc_get_env_dev()   Patrice Chotard
• [PATCH v2 06/22] ARM: dts: stm32: add "u-boot, mmc-env-partition" for stm32mp257f-ev1-u-boot   Patrice Chotard
• [PATCH v2 07/22] board: st: stm32mp2: add led support   Patrice Chotard
• [PATCH v2 08/22] board: st: stm32mp2: add user button support   Patrice Chotard
• [PATCH v2 09/22] configs: stm32mp25: add support of NAND and NOR boot   Patrice Chotard
• [PATCH v2 10/22] board: st: stm32mp2: change bootcmd for ST boards   Patrice Chotard
• [PATCH v2 11/22] configs: stm32mp25: add USB host boot support   Patrice Chotard
• [PATCH v2 12/22] configs: stm32mp25: add PXE boot support   Patrice Chotard
• [PATCH v2 13/22] ARM: dts: stm32: add sdmmc1 fixed clock for stm32mp257f-ev1-u-boot   Patrice Chotard
• [PATCH v2 14/22] arm: stm32mp: increase EARLY_TLB_SIZE to 0x10000   Patrice Chotard
• [PATCH v2 15/22] arm: stm32mp: disable console for UART serial boot   Patrice Chotard
• [PATCH v2 16/22] arm: stm32mp: implement new STM32MP25 revision ID system   Patrice Chotard
• [PATCH v2 17/22] arm: stm32mp: fix package IDs for stm32mp25   Patrice Chotard
• [PATCH v2 18/22] arm: stm32mp: cmd_stm32key: update command for stm32mp25x   Patrice Chotard
• [PATCH v2 19/22] arm: stm32mp: add helper function stm32mp_is_closed()   Patrice Chotard
• [PATCH v2 20/22] arm: stm32mp: stm32prog: PTA BSEC is not supported on closed device   Patrice Chotard
• [PATCH v2 21/22] arm: stm32mp: stm32prog: add support rootfs-a for OTA   Patrice Chotard
• [PATCH v2 22/22] configs: stm32mp25: enable DISTRO_DEFAULT and BOOTCOMMAND   Patrice Chotard
• [PATCH v3] stm32mp: Add tamp_nvram driver   Patrice Chotard
• [PATCH] hmibsc_defconfig: disable DM_USB_GADGET   Caleb Connolly
• [PATCH 2/4] mach-snapdragon: CapsuleUpdate: support all boot methods   Caleb Connolly
• [PATCH] MAINTAINERS: board: qcom: db820c: update contact details   Caleb Connolly
• [PATCH 6/7] mach-snapdragon: board interface to enforce fdt   Caleb Connolly
• [PATCH 1/5] board: qualcomm: dragonboard820c: udpate readme   Caleb Connolly
• [PATCH 2/5] clk/qcom: apq8096: fix set rate for the uart clock   Caleb Connolly
• [PATCH 3/5] clk/qcom: apq8096: fix the sdhci clock   Caleb Connolly
• [PATCH 2/2] qcom_defconfig: Disable MMC HS200 mode support   Caleb Connolly
• [PATCH 2/2] qcom_defconfig: Disable MMC HS200 mode support   Caleb Connolly
• [PATCH 1/2] arm: dts: Add override for RB1   Caleb Connolly
• [PATCH] common: Add CONFIG_SKIP_RELOCATE   Caleb Connolly
• [PATCH 1/2] arm: dts: Add override for RB1   Caleb Connolly
• Community meeting April 8th 2025 (was: Re: [ANN] U-Boot v2025.04 released)   Caleb Connolly
• [PATCH 4/5] clk: stub: add qcom,glink-smd-rpm   Caleb Connolly
• [PATCH 5/5] configs: dragonboard820: updates   Caleb Connolly
• [PATCH 00/13] board: dragonboard410c: Various fixes and cleanup   Caleb Connolly
• [PATCH 0/6] Qualcomm: cleanup OF_LIVE fixup and fix RB1/2   Caleb Connolly
• [PATCH 1/6] event: signal when livetree has been built   Caleb Connolly
• [PATCH 2/6] mach-snapdragon: use EVT_OF_LIVE_INIT to apply DT fixups   Caleb Connolly
• [PATCH 3/6] mach-snapdragon: of_fixup: skip disabled USB nodes   Caleb Connolly
• [PATCH 4/6] clk/qcom: qcm2290: show clock name in set_rate()   Caleb Connolly
• [PATCH 5/6] mach-snapdragon: of_fixup: set dr_mode for RB1/2 boards   Caleb Connolly
• [PATCH 6/6] pinctrl: qcom: qcm2290: fix off by 1 in pin_count   Caleb Connolly
• [PATCH] hmibsc_defconfig: disable DM_USB_GADGET   Caleb Connolly
• [PATCH 1/5] board: qualcomm: dragonboard820c: update readme   Caleb Connolly
• [PATCH 1/2] arm: dts: Add override for RB1   Caleb Connolly
• [PATCH 0/6] usb: host: ehci-msm: Clean up and fix crashes   Caleb Connolly
• [PATCH v2 2/2] phy: phy-qcom-qusb2: Fix USB PHY power on sequence   Caleb Connolly
• [PATCH v2 0/2] RB1 fixes   Caleb Connolly
• [PATCH 0/6] Qualcomm: cleanup OF_LIVE fixup and fix RB1/2   Caleb Connolly
• [PATCH 1/6] event: signal when livetree has been built   Caleb Connolly
• [PATCH 1/6] event: signal when livetree has been built   Caleb Connolly
• [PATCH 1/6] event: signal when livetree has been built   Caleb Connolly
• [PATCH 1/6] event: signal when livetree has been built   Caleb Connolly
• [PATCH v2 0/8] Qualcomm: cleanup OF_LIVE fixup and fix RB1/2   Caleb Connolly
• [PATCH v2 1/8] event: signal when livetree has been built   Caleb Connolly
• [PATCH v2 2/8] mach-snapdragon: use EVT_OF_LIVE_INIT to apply DT fixups   Caleb Connolly
• [PATCH v2 3/8] mach-snapdragon: of_fixup: skip disabled USB nodes   Caleb Connolly
• [PATCH v2 4/8] mach-snapdragon: of_fixup: remove confusing log message   Caleb Connolly
• [PATCH v2 5/8] mach-snapdragon: of_fixup: update comment   Caleb Connolly
• [PATCH v2 6/8] mach-snapdragon: of_fixup: set dr_mode for RB1/2 boards   Caleb Connolly
• [PATCH v2 7/8] clk/qcom: qcm2290: show clock name in set_rate()   Caleb Connolly
• [PATCH v2 8/8] pinctrl: qcom: qcm2290: fix off by 1 in pin_count   Caleb Connolly
• [PATCH 0/2] gpio: msm: fix special pins handling   Caleb Connolly
• [PATCH v4 0/6] Better smartphone support (Qualcomm)   Caleb Connolly
• [PATCH] mach-snapdragon: of_fixup: fix condition check in ft_board_setup()   Caleb Connolly
• [PATCH v2 0/2] RB1 fixes   Caleb Connolly
• [PATCH v2] drivers: pinctrl: Add Qualcomm SDM630/660 TLMM driver   Caleb Connolly
• [PULL] Please pull qcom-for-2025.07   Caleb Connolly
• [PATCH 2/4] mach-snapdragon: CapsuleUpdate: support all boot methods   Caleb Connolly
• [PATCH v2 0/4] Qualcomm: expand capsule update support   Caleb Connolly
• [PATCH v2 1/4] mach-snapdragon: track boot source   Caleb Connolly
• [PATCH v2 2/4] mach-snapdragon: CapsuleUpdate: support all boot methods   Caleb Connolly
• [PATCH v2 3/4] dfu: scsi: don't call scsi_scan()   Caleb Connolly
• [PATCH v2 4/4] qcom_defconfig: enable capsule update support   Caleb Connolly
• [PATCH v2 1/8] event: signal when livetree has been built   Caleb Connolly
• [PATCH] mailmap: update my name and email   Casey Connolly
• [PATCH 4/6] clk: qcom: Allow polling for clock status in qcom_gate_clk_en()   Casey Connolly
• [PATCH v2 2/2] watchdog: qcom: improve driver with more functionality   Casey Connolly
• [PATCH v2 0/2] watchdog: qcom: introduce qcom-wdt driver   Casey Connolly
• [PATCH v3] watchdog: qcom: introduce qcom-wdt driver   Casey Connolly
• [PATCH v2 0/6] clk: qcom: apq8016: Clock fixes for U-Boot v2025.07   Casey Connolly
• [PATCH 0/3] u-boot chain-loading LineageOS bootimg   Casey Connolly
• [PATCH v1 1/3] mach-snapdragon: Do not define reset_cpu() if SYSRESET is enabled   Casey Connolly
• [PATCH v1 2/3] sysreset: Implement PSCI based reset to EDL mode for QCOM SoCs   Casey Connolly
• [PATCH 0/3] board: dragonboard410c: More fixes for U-Boot v2025.07   Casey Connolly
• [PATCH] efi_loader: bootbin: do not load an initrd if none is provided   Adriano Cordova
• [PATCH v2 0/2] Fix initrd loading in efi_bootbin.   Adriano Cordova
• [PATCH v2 1/2] efi_loader: bootbin: do not load an initrd if none is provided   Adriano Cordova
• [PATCH v2 2/2] efi_loader: fix typo initd_sz to initrd_sz   Adriano Cordova
• [PATCH v3 0/2] Fix initrd loading in efi_bootbin   Adriano Cordova
• [PATCH v3 1/2] efi_loader: bootbin: do not load an initrd if none is provided   Adriano Cordova
• [PATCH v3 2/2] efi_loader: fix typo initd_sz to initrd_sz   Adriano Cordova
• [PATCH v2 1/1] fs/squashfs: avoid illegal free() in sqfs_opendir()   Joao Marcos Costa
• [PATCH] fs/sqaushfs: avoid illegal free() in sqfs_opendir()   João Marcos Costa
• [RFC PATCH 0/3] Add FlexSPI support for i.MX RT1170   Jonathan Currier
• [RFC PATCH 1/3] spi: fspi: involve lut_num for struct nxp_fspi_devtype_data   Jonathan Currier
• [RFC PATCH 2/3] spi: fspi: Add imxrt1170 device data   Jonathan Currier
• [RFC PATCH 3/3] spi: fspi: dev_dbg() call assumes fdt_addr_t always a long long   Jonathan Currier
• [PATCH 0/4] Extend usb_onboard_hub driver to support Cypress HX3 hub family   Lukasz Czechowski
• [PATCH 1/4] usb: onboard-hub: Use the ofnode to check if the peer-hub was probed   Lukasz Czechowski
• [PATCH 2/4] usb: onboard-hub: Set the reset gpio pin before freeing   Lukasz Czechowski
• [PATCH 3/4] usb: onboard-hub: Add support for multiple power supplies   Lukasz Czechowski
• [PATCH 4/4] usb: onboard-hub: Add support for Cypress HX3 family   Lukasz Czechowski
• [PATCH v2 2/3] efi_loader: binary_run: register an initrd   Adriano Córdova
• [PATCH] stm32mp: Add nvram driver   Patrick DELAUNAY
• [PATCH] net: dwc_eth_qos: add support of stm32mp2 platform   Patrick DELAUNAY
• [PATCH 1/6] configs: stm32f769-disco_spl: Fix console cmdline   Patrick DELAUNAY
• [PATCH 2/6] configs: stm32f746-disco_spl: Fix console cmdline   Patrick DELAUNAY
• [PATCH 3/6] configs: stm32f769-disco: Fix console cmdline   Patrick DELAUNAY
• [PATCH 4/6] configs: stm32f729-discovery: Fix console cmdline   Patrick DELAUNAY
• [PATCH 5/6] configs: stm32746-eval_spl: Fix console cmdline   Patrick DELAUNAY
• [PATCH 6/6] configs: stm32746-eval: Fix console cmdline   Patrick DELAUNAY
• [PATCH 01/13] ARM: dts: sti: convert stih410-b2260 board to OF_UPSTREAM   Patrick DELAUNAY
• [PATCH 02/13] ARM: dts: stm32: convert stm23h7 boards to OF_UPSTREAM   Patrick DELAUNAY
• [PATCH 03/13] ARM: dts: stm32: convert stm23f7 boards to OF_UPSTREAM   Patrick DELAUNAY
• [PATCH 04/13] ARM: dts: stm32: convert stm23f4 boards to OF_UPSTREAM   Patrick DELAUNAY
• [PATCH 05/13] ARM: dts: stm32: convert stm32mp13 board to OF_UPSTREAM   Patrick DELAUNAY
• [PATCH 06/13] ARM: dts: stm32: convert stm32mp15 board to OF_UPSTREAM   Patrick DELAUNAY
• [PATCH 07/13] configs: stm32: introduce stm32mp15-odyssey_defconfig   Patrick DELAUNAY
• [PATCH 08/13] stm32mp1: clk: Update index for DSI gate   Patrick DELAUNAY
• [PATCH 09/13] ARM: stm32mp: add ETZPC system bus driver for STM32MP1   Patrick DELAUNAY
• [PATCH 10/13] ARM: dts: stm32: add ETZPC as a system bus for STM32MP1x boards   Patrick DELAUNAY
• [PATCH 11/13] stm32mp: fdt: remove ETZPC peripheral cleanup   Patrick DELAUNAY
• [PATCH 12/13] ARM: dts: stm32: convert stm32mp2 board to OF_UPSTREAM   Patrick DELAUNAY
• [PATCH 13/13] ARM: stm32mp: add RIFSC system bus driver for STM32MP25   Patrick DELAUNAY
• [PATCH v2 2/2] doc: memory: Add documentation for system RAM   Alexander Dahl
• [PATCH v2 0/2] Change DRAM message and add RAM doc   Alexander Dahl
• [PATCH 1/2] bootstd: Add implementation for bootmeth rauc   Alexander Dahl
• [PATCH v5] spl: remove usage of CMD_BOOT[IZ] from image parsing   Anshul Dalal
• [PATCH v6 1/4] spl: remove usage of CMD_BOOTx from image parsing   Anshul Dalal
• [PATCH v6 2/4] configs: disable SPL_HAS_BOOTZ to preserve spl size   Anshul Dalal
• [PATCH v6 3/4] configs: migrate falcon configs to SPL_HAS_BOOTx   Anshul Dalal
• [PATCH v6 4/4] configs: colibri_vf: set CMD_BOOTM   Anshul Dalal
• [PATCH v3 00/10] Add falcon support for am62a, 62p and 62x   Anshul Dalal
• [PATCH v3 01/10] spl: Kconfig: allow K3 devices to use falcon mode   Anshul Dalal
• [PATCH v3 02/10] mach-k3: fix reading size and addr from fdt on R5   Anshul Dalal
• [PATCH v3 03/10] arm: dts: am62a: allow booting from eMMC   Anshul Dalal
• [PATCH v3 04/10] arch: arm: k3-binman: add fit for falcon boot   Anshul Dalal
• [PATCH v3 05/10] mach-k3: add eMMC FS boot support for am62[ap]   Anshul Dalal
• [PATCH v3 06/10] mach-k3: sysfw-loader: update img_hdr for falcon   Anshul Dalal
• [PATCH v3 07/10] config: add falcon boot config fragment for am62x   Anshul Dalal
• [PATCH v3 08/10] board: ti: add default dtb for am62[axp] in falcon mode   Anshul Dalal
• [PATCH v3 09/10] mach-k3: common: add falcon support for 62[axp]   Anshul Dalal
• [PATCH v3 10/10] Makefile: update tispl regex to also clean falcon spl   Anshul Dalal
• [PATCH v5] spl: remove usage of CMD_BOOT[IZ] from image parsing   Anshul Dalal
• [PATCH v2 0/8] Add falcon support for am62a, 62p and 62x   Anshul Dalal
• [PATCH v7 1/4] spl: remove usage of CMD_BOOTx from image parsing   Anshul Dalal
• [PATCH v7 2/4] configs: disable SPL_BOOTZ to preserve spl size   Anshul Dalal
• [PATCH v7 3/4] configs: migrate falcon configs to SPL_BOOTx   Anshul Dalal
• [PATCH v7 4/4] configs: colibri_vf: set CMD_BOOTM   Anshul Dalal
• [PATCH v1] configs: set SPL_TEXT_BASE by default for k3 platforms   Anshul Dalal
• [PATCH v2] configs: set SPL_TEXT_BASE by default for k3 platforms   Anshul Dalal
• [PATCH v3] configs: set SPL_TEXT_BASE by default for k3 platforms   Anshul Dalal
• [PATCH v1] arm: dts: am62a: allow booting from eMMC   Anshul Dalal
• [PATCH v1] mach-k3: add eMMC FS boot support for am62[ap]   Anshul Dalal
• [PATCH v1 0/4] k3: migrate SPL_TEXT_BASE to new address   Anshul Dalal
• [PATCH v1 1/4] spl: Kconfig: k3: set SPL_TEXT_BASE to 0x82200000   Anshul Dalal
• [PATCH v1 2/4] mach-k3: add a jump stub to support older ATF builds   Anshul Dalal
• [PATCH v1 3/4] binman: k3: add jump-stub to tispl.bin   Anshul Dalal
• [PATCH v1 4/4] binman: k3: add jump-stub as loadable   Anshul Dalal
• [PATCH v4 0/8] Add falcon support for am62a, 62p and 62x   Anshul Dalal
• [PATCH v4 1/8] spl: Kconfig: allow K3 devices to use falcon mode   Anshul Dalal
• [PATCH v4 2/8] mach-k3: fix reading size and addr from fdt on R5   Anshul Dalal
• [PATCH v4 3/8] arch: arm: k3-binman: add fit for falcon boot   Anshul Dalal
• [PATCH v4 4/8] mach-k3: sysfw-loader: update img_hdr for falcon   Anshul Dalal
• [PATCH v4 5/8] config: add falcon boot config fragment for am62x   Anshul Dalal
• [PATCH v4 6/8] board: ti: add default dtb for am62[axp] in falcon mode   Anshul Dalal
• [PATCH v4 7/8] mach-k3: common: add falcon support for 62[axp]   Anshul Dalal
• [PATCH v4 8/8] Makefile: update tispl regex to also clean falcon spl   Anshul Dalal
• [PATCH v1 0/4] k3: migrate SPL_TEXT_BASE to new address   Anshul Dalal
• [PATCH v4 0/8] Add falcon support for am62a, 62p and 62x   Anshul Dalal
• [PATCH v1 0/4] k3: migrate SPL_TEXT_BASE to new address   Anshul Dalal
• [RFC] Expected behavior of the go command   Anshul Dalal
• [PATCH v5 0/9] Add falcon support for am62a, 62p and 62x   Anshul Dalal
• [PATCH v5 1/9] spl: Kconfig: allow K3 devices to use falcon mode   Anshul Dalal
• [PATCH v5 2/9] mach-k3: fix reading size and addr from fdt on R5   Anshul Dalal
• [PATCH v5 3/9] arch: arm: k3-binman: add fit for falcon boot   Anshul Dalal
• [PATCH v5 4/9] mach-k3: sysfw-loader: update img_hdr for falcon   Anshul Dalal
• [PATCH v5 5/9] config: add falcon boot config fragment for am62x   Anshul Dalal
• [PATCH v5 6/9] board: ti: add default dtb for am62 in falcon mode   Anshul Dalal
• [PATCH v5 7/9] mach-k3: common: enable falcon mode for 62 platform   Anshul Dalal
• [PATCH v5 8/9] Makefile: update tispl regex to also clean falcon spl   Anshul Dalal
• [PATCH v5 9/9] doc: ti: am62: add falcon mode documentation   Anshul Dalal
• [PATCH v5 9/9] doc: ti: am62: add falcon mode documentation   Anshul Dalal
• [PATCH v6 0/9] Add falcon support for am62a, 62p and 62x   Anshul Dalal
• [PATCH v6 1/9] spl: Kconfig: allow K3 devices to use falcon mode   Anshul Dalal
• [PATCH v6 2/9] mach-k3: fix reading size and addr from fdt on R5   Anshul Dalal
• [PATCH v6 3/9] arch: arm: k3-binman: add fit for falcon boot   Anshul Dalal
• [PATCH v6 4/9] mach-k3: sysfw-loader: update img_hdr for falcon   Anshul Dalal
• [PATCH v6 5/9] config: add falcon boot config fragment for am62x   Anshul Dalal
• [PATCH v6 6/9] board: ti: add default dtb for am62 in falcon mode   Anshul Dalal
• [PATCH v6 7/9] mach-k3: common: enable falcon mode for 62 platform   Anshul Dalal
• [PATCH v6 8/9] Makefile: update tispl regex to also clean falcon spl   Anshul Dalal
• [PATCH v6 9/9] doc: ti: am62: add falcon mode documentation   Anshul Dalal
• [PATCH v1 1/2] doc: ti: update bash code-block directives to prompt   Anshul Dalal
• [PATCH v1 2/2] doc: ti: k3: add language for code-block directive   Anshul Dalal
• [PATCH v1] arm: add call to cleanup_before_linux for go command   Anshul Dalal
• [PATCH v1] arm: add call to cleanup_before_linux for go command   Anshul Dalal
• [PATCH 6/9] configs: am67a_beagley_ai*: Use saveddefconfig   Andrew Davis
• [PATCH 8/9] configs: am67a_beagley_ai_a53: Enable additional features   Andrew Davis
• [PATCH 9/9] doc: beagle: Add BeagleY-AI documentation   Andrew Davis
• [PATCH v1 0/4] k3: migrate SPL_TEXT_BASE to new address   Andrew Davis
• [PATCH 1/4] arm: mach-k3: Add config option for booting HSM core   Andrew Davis
• [PATCH 2/4] arm: dts: k3-binman: Add template for packing HSM firmware   Andrew Davis
• [PATCH 3/4] arm: dts: k3-{j721s2/j784s4}-binman: Pack HSM firmware inside tispl.bin   Andrew Davis
• [PATCH 4/4] arm: mach-k3: r5: common: Add support to boot HSM M4 core   Andrew Davis
• [PATCH 2/4] arm: dts: k3-binman: Add template for packing HSM firmware   Andrew Davis
• [PATCH 0/9] board: beagle: beagley-ai: Cleanups and stdboot   Andrew Davis
• [PATCH] arm: dts: k3: binman: Fix DM firmware selection   Andrew Davis
• [PATCH] arm: dts: k3: binman: Fix DM firmware selection   Andrew Davis
• [PATCH v4 1/6] board/qualcomm: introduce phone config   Sam Day
• [PATCH 0/6] usb: host: ehci-msm: Clean up and fix crashes   Sam Day
• [PATCH 0/3] Support MSM8916 USB PHY + UDC in qcom_defconfig   Sam Day
• [PATCH 1/3] usb: udc: ci: support USB gadget driver model   Sam Day
• [PATCH 2/3] usb: host: ehci-msm: Register ChipIdea UDC from glue wrapper   Sam Day
• [PATCH 3/3] qcom_defconfig: Enable MSM8916 USB PHY + ChipIdea UDC   Sam Day
• [PATCH 1/3] usb: udc: ci: support USB gadget driver model   Sam Day
• [PATCH v1 1/3] mach-snapdragon: Do not define reset_cpu() if SYSRESET is enabled   Sam Day
• [PATCH v1 2/3] sysreset: Implement PSCI based reset to EDL mode for QCOM SoCs   Sam Day
• [PATCH] usb: dwc3: gadget: Fix match_ep callback for NXP UUU tool   Francesco Dolcini
• [PATCH v1 0/3] Add support for Toradex SMARC i.MX8MP   Francesco Dolcini
• [PATCH] usb: dwc3: gadget: Fix match_ep callback for NXP UUU tool   Francesco Dolcini
• [PATCH] usb: dwc3: gadget: Fix match_ep callback for NXP UUU tool   Francesco Dolcini
• [PATCH v6 05/12] power-domain: Add refcounting   Francesco Dolcini
• [PATCH v6 05/12] power-domain: Add refcounting   Francesco Dolcini
• [PATCH v6 05/12] power-domain: Add refcounting   Francesco Dolcini
• [REGRESSION] Re: [PATCH v2 16/24] clk: imx: Convert clock-osc-* back to osc_*   Francesco Dolcini
• [REGRESSION] Re: [PATCH v2 16/24] clk: imx: Convert clock-osc-* back to osc_*   Francesco Dolcini
• [REGRESSION] Re: [PATCH v2 16/24] clk: imx: Convert clock-osc-* back to osc_*   Francesco Dolcini
• [REGRESSION] [PATCH 1/1] mtd: mtdpart: Support MTD_SIZE_REMAINING with unallocated memory area   Francesco Dolcini
• [REGRESSION] [PATCH 1/1] mtd: mtdpart: Support MTD_SIZE_REMAINING with unallocated memory area   Francesco Dolcini
• [PATCH v1] toradex: tdx-cfg-block: fix verdin imx95 sku 0089 pid4   Francesco Dolcini
• [PATCH 1/4] build: Respect CONFIG_SPL_BUILD in DT sources   Hendrik Donner
• [PATCH v2 5/6] dt-bindings: clock: drop NUM_CLOCKS define for EN7581   Conor Dooley
• [PATCH 0/2] Hyperflash boot fixes for j721e   Anurag Dutta
• [PATCH 1/2] mtd: Kconfig: Add SPL_MUX_MMIO dependency to HBMC driver   Anurag Dutta
• [PATCH 2/2] arm: dts: k3-j721e-r5-common-proc-board: Enable HBMC in R5 SPL stage   Anurag Dutta
• [PATCH 0/2] AM57 Boot fixes   Anurag Dutta
• [PATCH 1/2] include: env: ti: mmc.h: Find DTB files in dtb directory for AM57xx   Anurag Dutta
• [PATCH 2/2] board: ti: am57xx: Set fdtfile from C code instead of findfdt script   Anurag Dutta
• [PATCH 1/2] bootstd: Add implementation for bootmeth rauc   Wadim Egorov
• [PATCH v6 05/12] power-domain: Add refcounting   Wadim Egorov
• [PATCH] Revert "power-domain: Add refcounting"   Wadim Egorov
• [PATCH 0/2] power-domain: Enable uclass refcounting   Wadim Egorov
• [PATCH 1/2] power-domain: Add support for refcounting (again)   Wadim Egorov
• [PATCH 1/7] board: phytec: phycore_am62x: Update environment for fitboot   Wadim Egorov
• [PATCH 2/7] board: phytec: phycore_am64x: Update environment for fitboot   Wadim Egorov
• [PATCH 3/7] board: phytec: phycore_am6xx: Set bootmeths & boot_targets environment   Wadim Egorov
• [PATCH 4/7] configs: phycore_am6xx: Default BOOTCOMMAND to standard boot   Wadim Egorov
• [PATCH 5/7] board: phytec: common: k3: Update boot_targets at runtime   Wadim Egorov
• [PATCH 6/7] board: phytec: common: k3: Factor out mac address setup   Wadim Egorov
• [PATCH 7/7] configs: phycore_am6xx_a53_defconfig: Enable BOOTDEV_SPI_FLASH   Wadim Egorov
• Issue with booting FIT image using Yocto with raspberry pi cm4   Andreas Enbacka
• Issue with booting FIT image using Yocto with raspberry pi cm4   Andreas Enbacka
• [PATCH 2/2] CI: Build missing binman tools before binman tests   Fabio Estevam
• Re: 回复: [PATCH v8 02/19] pinctrl: nxp: add a pin controller driver based on SCMI pin control protocol   Fabio Estevam
• sama5d27: Replacing at91bootstrap with U-Boot SPL   Fabio Estevam
• sama5d27: Replacing at91bootstrap with U-Boot SPL   Fabio Estevam
• [PATCH] ARM: dts: at91: sama5d2: Pass bootph-all to the PIT timer   Fabio Estevam
• [PATCH] board: atmel: sama5d2_wlsom1_ek: Fix spurious serial output   Fabio Estevam
• [PATCH v2 1/2] board: atmel: sama5d2_wlsom1_ek: Fix spurious serial output   Fabio Estevam
• [PATCH v2 2/2] board: atmel: sama5d2_wlsom1_ek: Remove UART pinctrl initialization   Fabio Estevam
• [RESEND PATCH] clk: fix crash on clk_set_rate clean rate cache   Fabio Estevam
• [PATCH v2 1/2] board: atmel: sama5d2_wlsom1_ek: Fix spurious serial output   Fabio Estevam
• [PATCH] configs: sama5d27_wlsom1_ek: Select CONFIG_NET_RANDOM_ETHADDR   Fabio Estevam
• [PATCH] configs: sama5d27_wlsom1_ek: Select CONFIG_NET_RANDOM_ETHADDR   Fabio Estevam
• [PATCH] configs: sama5d27_wlsom1_ek: Select CONFIG_NET_RANDOM_ETHADDR   Fabio Estevam
• [PATCH] common: Add CONFIG_SKIP_RELOCATE   Fabio Estevam
• [PATCH v2] common: Add CONFIG_SKIP_RELOCATE   Fabio Estevam
• [PATCH RESEND] firmware: scmi: support to manage SCMI protocol drivers with a linker-genetated array   Fabio Estevam
• [PATCH RESEND] firmware: scmi: support to manage SCMI protocol drivers with a linker-genetated array   Fabio Estevam
• [GIT PULL] Please pull u-boot-imx-master-20250411   Fabio Estevam
• [PATCH v1 3/3] board: toradex: add Toradex SMARC iMX8MP   Fabio Estevam
• [PATCH v6 00/12] Add imx8mp video support   Fabio Estevam
• [PATCH] toradex: apalis-imx6: Fix build failure when CONFIG_VIDEO_IPUV3 is enabled   Fabio Estevam
• [PATCH] firmware: scmi: smt: Interrupt communication enable   Fabio Estevam
• [PATCH 0/6] Update phyCORE-i.MX93 environment   Fabio Estevam
• [REGRESSION] Re: [PATCH v2 16/24] clk: imx: Convert clock-osc-* back to osc_*   Fabio Estevam
• [PATCH] clk: imx: Finish converting clock-osc-24 back to osc_24   Fabio Estevam
• [REGRESSION] Re: [PATCH v2 16/24] clk: imx: Convert clock-osc-* back to osc_*   Fabio Estevam
• [REGRESSION] Re: [PATCH v2 16/24] clk: imx: Convert clock-osc-* back to osc_*   Fabio Estevam
• [PATCH] clk: fixed-rate: Use "clock-output-names" to name fixed clocks   Fabio Estevam
• [REGRESSION] Re: [PATCH v2 16/24] clk: imx: Convert clock-osc-* back to osc_*   Fabio Estevam
• [PATCH] ARM: dts: at91: sama5d2: Pass bootph-all to the PIT timer   Fabio Estevam
• [PATCH v2] clk: fixed-rate: Use "clock-output-names" to name fixed clocks   Fabio Estevam
• [PATCH v3 22/22] CI: Add tests for gitlab and azure   Fabio Estevam
• [PATCH v2] clk: fixed-rate: Use "clock-output-names" to name fixed clocks   Fabio Estevam
• [PATCH v2] clk: fixed-rate: Use "clock-output-names" to name fixed clocks   Fabio Estevam
• [PATCH v2] clk: fixed-rate: Use "clock-output-names" to name fixed clocks   Fabio Estevam
• [PATCH v2] clk: fixed-rate: Use "clock-output-names" to name fixed clocks   Fabio Estevam
• [PATCH v1 2/3] siemens: capricorn: enable text based default environment   Fabio Estevam
• [PATCH v1 1/3] imx8qxp: capricorn defconfig: collect common Kconfig options   Fabio Estevam
• [PATCH v1 3/3] siemens: capricorn: add ahab command and enable watchdog   Fabio Estevam
• [RFC PATCH 0/3] Add FlexSPI support for i.MX RT1170   Fabio Estevam
• [PATCH v2] clk: fixed-rate: Use "clock-output-names" to name fixed clocks   Fabio Estevam
• [PATCH 1/4] build: Respect CONFIG_SPL_BUILD in DT sources   Fabio Estevam
• [PATCH 2/4] arm64: dts: imx8mn: Remove unreferenced clock-controller clocks in SPL DTs   Fabio Estevam
• [PATCH 3/4] Revert "arm64: dts: imx8mn: Include 32kHz oscillator clock in SPL DTs"   Fabio Estevam
• [PATCH 4/4] arm64: dts: imx8mm: Allow osc_24m to be available in SPL   Fabio Estevam
• [PATCH v2] clk: fixed-rate: Use "clock-output-names" to name fixed clocks   Fabio Estevam
• [PATCH 4/4] arm64: dts: imx8mm: Allow osc_24m to be available in SPL   Fabio Estevam
• [PATCH] arm64: dts: imx8mm: Make osc_32k available in SPL   Fabio Estevam
• [PATCH] clk: imx: Pass CCM udevice into clk_register_composite()   Fabio Estevam
• [GIT PULL] Please pull u-boot-imx-master-20250428   Fabio Estevam
• [PATCH] clk: imx: Finish converting clock-osc-24 back to osc_24   Fabio Estevam
• [PATCH v1] toradex: tdx-cfg-block: fix verdin imx95 sku 0089 pid4   Fabio Estevam
• [PATCH] arm64: dts: imx8mm: Make osc_32k available in SPL   Fabio Estevam
• [PATCH v2 0/5] Updates for the siemens cxg3 for 2025.07   Fabio Estevam
• [PATCH] clk: imx: Pass CCM udevice into clk_register_composite()   Fabio Estevam
• [PATCH 0/2] power-domain: Enable uclass refcounting   Fabio Estevam
• [PATCH] MAINTAINERS: Update email of Stefano Babic   Fabio Estevam
• [PATCH] imx: mx51evk: drop Stefano Babic from MAINTAINERS   Fabio Estevam
• [PATCH] mmc: sdhci: Fix possible Synchronous Abort using PIO mode   Peng Fan
• [GIT PULL] Please pull mmc-2025-04-11   Peng Fan
• [PATCH 1/1] mmc: type 'Relatvie'   Peng Fan
• [PATCH 0/2] mmc: omap_hsmmc: Restore the init_stream sequence   Peng Fan
• 回复: 回复: [EXT] [PATCH] power: regulator: scmi: Move regulator subnode hack to scmi_regulator   Peng Fan
• 回复: 回复: [EXT] [PATCH] power: regulator: scmi: Move regulator subnode hack to scmi_regulator   Peng Fan
• [GIT PULL] Please pull mmc-2025-04-23   Peng Fan
• [PATCH] mmc: cv1800b: Fix build without MMC_SUPPORTS_TUNING   Peng Fan
• [PATCH] net: fsl_enetc: fix imdio register calculation   Wei Fang
• [PATCH v1 0/4] k3: migrate SPL_TEXT_BASE to new address   Ahmad Fatoum
• [RFC] Expected behavior of the go command   Ahmad Fatoum
• [RFC] Expected behavior of the go command   Ahmad Fatoum
• [RFC] Expected behavior of the go command   Ahmad Fatoum
• [PATCH] efi_loader: bootbin: do not load an initrd if none is provided   Adriano Cordova Fedeli
• [PATCH v2 3/8] board: starfive: DeepComputing FML13V01 fdt selection   Hal Feng
• [PATCH v2 4/8] board: starfive: spl: support DeepComputing FML13V01   Hal Feng
• [PATCH v3 4/8] board: starfive: spl: support DeepComputing FML13V01   Hal Feng
• [PATCH] board: phytec: common: Fix phytec_get_product_name()   Primoz Fiser
• [PATCH 0/6] Update phyCORE-i.MX93 environment   Primoz Fiser
• [PATCH 1/6] board: phycore-imx93: env: Move fdt and bootenv addresses   Primoz Fiser
• [PATCH 2/6] board: phycore-imx93: env: Add optargs to environment   Primoz Fiser
• [PATCH 3/6] board: phycore-imx93: env: Add prepare_mcore to environment   Primoz Fiser
• [PATCH 4/6] board: phycore-imx93: env: Add option to disable bootenv.txt import   Primoz Fiser
• [PATCH 5/6] board: phycore-imx93: env: Move bootcmd from defconfig to env   Primoz Fiser
• [PATCH 6/6] board: phycore-imx93: env: Add common RAUC boot logic   Primoz Fiser
• [PATCH v6 09/12] imx: power-domain: Add support for the MEDIAMIX control block   Adam Ford
• [PATCH v6 12/12] video: imx: Add LCDIF driver   Adam Ford
• [PATCH v6 06/12] clk: Ensure the parent clocks are enabled while reparenting   Adam Ford
• [REGRESSION] Re: [PATCH v2 16/24] clk: imx: Convert clock-osc-* back to osc_*   Adam Ford
• [REGRESSION] Re: [PATCH v2 16/24] clk: imx: Convert clock-osc-* back to osc_*   Adam Ford
• [PATCH] clk: imx: Finish converting clock-osc-24 back to osc_24   Adam Ford
• [REGRESSION] Re: [PATCH v2 16/24] clk: imx: Convert clock-osc-* back to osc_*   Adam Ford
• [REGRESSION] Re: [PATCH v2 16/24] clk: imx: Convert clock-osc-* back to osc_*   Adam Ford
• [REGRESSION] Re: [PATCH v2 16/24] clk: imx: Convert clock-osc-* back to osc_*   Adam Ford
• [REGRESSION] Re: [PATCH v2 16/24] clk: imx: Convert clock-osc-* back to osc_*   Adam Ford
• [PATCH] clk: fixed-rate: Use "clock-output-names" to name fixed clocks   Adam Ford
• [PATCH v2] clk: fixed-rate: Use "clock-output-names" to name fixed clocks   Adam Ford
• [PATCH v2] clk: fixed-rate: Use "clock-output-names" to name fixed clocks   Adam Ford
• [PATCH v2] clk: fixed-rate: Use "clock-output-names" to name fixed clocks   Adam Ford
• [PATCH v2] clk: fixed-rate: Use "clock-output-names" to name fixed clocks   Adam Ford
• [PATCH v2] clk: fixed-rate: Use "clock-output-names" to name fixed clocks   Adam Ford
• [PATCH] arm64: dts: imx8mm: Make osc_32k available in SPL   Adam Ford
• [PATCH 00/12] lwIP sandbox tests   Jerome Forissier
• [PATCH 0/2] NET_LWIP LMB fixes   Jerome Forissier
• [PATCH 1/2] net-lwip: wget: add LMB and buffer checks   Jerome Forissier
• [PATCH 2/2] net-lwip: tftp: add LMB and buffer checks   Jerome Forissier
• [PATCH 00/12] lwIP sandbox tests   Jerome Forissier
• [PATCH] cmd: optee: fix hello subcommand argument check   Jerome Forissier
• [PATCH v6 0/3] Static initcalls   Jerome Forissier
• [PATCH v6 1/3] arm: asm/system.h: mrc and mcr need .arm if __thumb2__ is not set   Jerome Forissier
• [PATCH v6 2/3] common: board: make initcalls static   Jerome Forissier
• [PATCH v6 3/3] initcall: remove initcall_run_list()   Jerome Forissier
• [PATCH v2 0/2] NET_LWIP LMB fixes   Jerome Forissier
• [PATCH v2 1/2] net-lwip: wget: add LMB and buffer checks   Jerome Forissier
• [PATCH v2 2/2] net-lwip: tftp: add LMB and buffer checks   Jerome Forissier
• [PATCH v2] net: dhcp6: Send DHCPv6 using multicast MAC   Jerome Forissier
• [PATCH] net: dhcpv6: remove excluded middle expression   Jerome Forissier
• [PATCH v2 1/2] net-lwip: wget: add LMB and buffer checks   Jerome Forissier
• [PATCH v3 0/3] NET_LWIP LMB fixes   Jerome Forissier
• [PATCH v3 1/3] net-lwip: wget_do_request(): do not print anything to the console   Jerome Forissier
• [PATCH v3 2/3] net-lwip: wget: add LMB and buffer checks   Jerome Forissier
• [PATCH v3 3/3] net-lwip: tftp: add LMB and buffer checks   Jerome Forissier
• [RFC PATCH v1 0/7] Bootstage reports for CI   Jerome Forissier
• [RFC PATCH v1 1/7] efi_loader: make efi_exit_boot_services() call bootstage_report()   Jerome Forissier
• [RFC PATCH v1 2/7] bootstage: add support for reporting in JSON format   Jerome Forissier
• [RFC PATCH v1 3/7] test/py/tests/test_bootstage.py: add test for JSON report   Jerome Forissier
• [RFC PATCH v1 4/7] bootstage: add support for reporting in InfluxDB v2 line format   Jerome Forissier
• [RFC PATCH v1 5/7] test/py/tests/test_bootstage.py: add test for InfluxDB report   Jerome Forissier
• [RFC PATCH v1 6/7] sandbox64_defconfig: enable bootstage report in JSON and InfluxDB formats   Jerome Forissier
• [RFC PATCH v1 7/7] test/py/tests/test_bootstage.py: upload bootstage data to InfluxDB cloud   Jerome Forissier
• [PATCH v1 0/2] ut: fix print_guid() and enable UNIT_TEST for qemu_arm64   Jerome Forissier
• [PATCH v1 1/2] test: fix print_guid()   Jerome Forissier
• [PATCH v1 2/2] qemu-arm64: enable UNIT_TEST   Jerome Forissier
• [PATCH v5 00/16] Uthreads   Jerome Forissier
• [PATCH v1 1/2] test: fix print_guid()   Jerome Forissier
• [PATCH v4 0/4] NET_LWIP LMB fixes   Jerome Forissier
• [PATCH v4 1/4] net-lwip: change static function wget_loop() to be wget_do_request()   Jerome Forissier
• [PATCH v4 2/4] net, net-lwip: wget: suppress console output when called by EFI   Jerome Forissier
• [PATCH v4 3/4] net-lwip: wget: add LMB and buffer checks   Jerome Forissier
• [PATCH v4 4/4] net-lwip: tftp: add LMB and buffer checks   Jerome Forissier
• [PATCH v2 0/2] ut: fix print_guid() and enable UNIT_TEST for qemu_arm64   Jerome Forissier
• [PATCH v2 1/2] lib/uuid.c: use unique name for PARTITION_SYSTEM_GUID   Jerome Forissier
• [PATCH v2 2/2] qemu-arm64: enable UNIT_TEST   Jerome Forissier
• [PATCH v2 00/11] lwIP sandbox tests   Jerome Forissier
• [PATCH v2 01/11] net: lwip: fix initialization sequence before a command   Jerome Forissier
• [PATCH v2 02/11] net: lwip: provide net_start_again()   Jerome Forissier
• [PATCH v2 03/11] net: lwip: add restart support to ping   Jerome Forissier
• [PATCH v2 04/11] net: lwip: use timer_early_get_count() when CONFIG_SANDBOX_TIMER=y   Jerome Forissier
• [PATCH v2 05/11] drivers: net: sandbox: add support for NET_LWIP   Jerome Forissier
• [PATCH v2 06/11] sandbox: provide static IP addresses for eth{2, 3, 5, 6, 7}   Jerome Forissier
• [PATCH v2 07/11] net: ping: make do_ping() available via <net.h>   Jerome Forissier
• [PATCH v2 08/11] test: dm: eth, dsa: update tests for NET_LWIP   Jerome Forissier
• [PATCH v2 09/11] net: lwip: allow DM_DSA=y when NET_LWIP=y   Jerome Forissier
• [PATCH v2 10/11] configs: add sandbox64_lwip_defconfig   Jerome Forissier
• [PATCH v2 11/11] CI: add sandbox64_lwip   Jerome Forissier
• [PATCH v3 0/2] ut: fix print_guid() and enable UNIT_TEST for qemu_arm64   Jerome Forissier
• [PATCH v3 1/2] lib/uuid.c: use unique name for PARTITION_SYSTEM_GUID   Jerome Forissier
• [PATCH v3 2/2] qemu-arm64: enable UNIT_TEST   Jerome Forissier
• [PATCH v4 2/4] net, net-lwip: wget: suppress console output when called by EFI   Jerome Forissier
• [PATCH v1 0/2] Enable UNIT_TEST for all qemu* generic targets   Jerome Forissier
• [PATCH v1 1/2] test: run some test commands only if HUSH_PARSER is enabled   Jerome Forissier
• [PATCH v1 2/2] configs: enable CONFIG_UNIT_TEST for all qemu* generic targets   Jerome Forissier
• [PATCH v5 0/4] NET_LWIP LMB fixes   Jerome Forissier
• [PATCH v5 1/4] net-lwip: change static function wget_loop() to be wget_do_request()   Jerome Forissier
• [PATCH v5 2/4] net, net-lwip: wget: suppress console output when called by EFI   Jerome Forissier
• [PATCH v5 3/4] net-lwip: wget: add LMB and buffer checks   Jerome Forissier
• [PATCH v5 4/4] net-lwip: tftp: add LMB and buffer checks   Jerome Forissier
• [PATCH v6 00/17] Uthreads   Jerome Forissier
• [PATCH v6 01/17] arch: introduce initjmp() and Kconfig symbol HAVE_INITJMP   Jerome Forissier
• [PATCH v6 02/17] arm: add initjmp()   Jerome Forissier
• [PATCH v6 03/17] riscv: add initjmp()   Jerome Forissier
• [PATCH v6 04/17] sandbox: add initjmp()   Jerome Forissier
• [PATCH v6 05/17] test: lib: add initjmp() test   Jerome Forissier
• [PATCH v6 06/17] uthread: add cooperative multi-tasking interface   Jerome Forissier
• [PATCH v6 07/17] uthread: add uthread_mutex   Jerome Forissier
• [PATCH v6 08/17] cyclic: invoke uthread_schedule() from schedule()   Jerome Forissier
• [PATCH v6 09/17] lib: time: hook uthread_schedule() into udelay()   Jerome Forissier
• [PATCH v6 10/17] test: lib: add uthread test   Jerome Forissier
• [PATCH v6 11/17] test: lib: add uthread_mutex test   Jerome Forissier
• [PATCH v6 12/17] dm: usb: move bus initialization into new static function usb_init_bus()   Jerome Forissier
• [PATCH v6 13/17] dm: usb: initialize and scan multiple buses simultaneously with uthread   Jerome Forissier
• [PATCH v6 14/17] cmd: add spawn and wait commands   Jerome Forissier
• [PATCH v6 15/17] test: cmd: add test for spawn and wait commands   Jerome Forissier
• [PATCH v6 16/17] MAINTAINERS: add UTHREAD   Jerome Forissier
• [PATCH v6 17/17] configs: qemu: enable UTHREAD and CMD_SPAWN in various defconfigs   Jerome Forissier
• Please pull net-20250423   Jerome Forissier
• [PATCH v5 0/4] NET_LWIP LMB fixes   Jerome Forissier
• PXE is broken on LWIP   Jerome Forissier
• [PATCH] net: lwip: tftp: time out if there is no reply from server   Jerome Forissier
• [PATCH] uthread: doc: fix inline documentation   Jerome Forissier
• Missing UTHREAD doc annotations   Jerome Forissier
• [PATCH] common: board: fix build condition of noncached memory initcall   Jerome Forissier
• [PATCH] cmd: spawn: reject 0 as an invalid job ID   Jerome Forissier
• Fwd: New Defects reported by Coverity Scan for Das U-Boot   Jerome Forissier
• [PATCH 1/2] net: Use a forward declaration for cmd_tbl in net-common.h   Jerome Forissier
• [PATCH 2/2] net: Move env_get_ip() out of the header file   Jerome Forissier
• NET_LWIP breaks common/log_syslog.c   Jérôme Forissier
• [PATCH V2] firmware: ti_sci: Scan all device instances when releasing exclusive devices   Francis, Neha
• [PATCH v6 05/12] power-domain: Add refcounting   Francis, Neha
• [PATCH v2 0/2] Change DRAM message and add RAM doc   Francis, Neha
• [PATCH] arm: dts: k3: binman: Fix DM firmware selection   Francis, Neha
• [PATCH] firmware: ti_sci: Add Initialization of dev_info head node   Francis, Neha
• [PATCH v3 3/3] DONOTMERGE: arm: dts: k3-j784s4-main: Add PBIST_14 node   Neha Malcom Francis
• [PATCH] mach-k3: common_fdt: Fix Label Issue   Neha Malcom Francis
• [PATCH v6 05/12] power-domain: Add refcounting   Neha Malcom Francis
• [PATCH v6 05/12] power-domain: Add refcounting   Neha Malcom Francis
• [PATCH v6 05/12] power-domain: Add refcounting   Neha Malcom Francis
• [PATCH v6 05/12] power-domain: Add refcounting   Neha Malcom Francis
• [PATCH v6 05/12] power-domain: Add refcounting   Neha Malcom Francis
• [PATCH v6 05/12] power-domain: Add refcounting   Neha Malcom Francis
• [PATCH 1/2] include: env: ti: mmc.h: Find DTB files in dtb directory for AM57xx   Neha Malcom Francis
• [PATCH 1/2] power-domain: Add support for refcounting (again)   Neha Malcom Francis
• Flashing U-boot on a Google Nexus 7 2012 (grouper)   Benjamin Freeman
• Flashing U-boot on a Google Nexus 7 2012 (grouper)   Benjamin Freeman
• [PATCH 1/2] rockchip: rk3288: grf: Unify speed/flowctrl fields for clarity   Christoph Fritz
• [PATCH 2/2] net: gmac_rockchip: Add RMII support for rk3288   Christoph Fritz
• [PATCH v3 1/3] net-lwip: wget_do_request(): do not print anything to the console   Sughosh Ganu
• [PATCH v4 2/4] net, net-lwip: wget: suppress console output when called by EFI   Sughosh Ganu
• [PATCH] lmb: use a different bit position for LMB_NOMAP   Sughosh Ganu
• [PATCH] cmd: cls: do not repeat clearing of console   Sughosh Ganu
• [PATCH v5 0/4] NET_LWIP LMB fixes   Sughosh Ganu
• [PATCH v5 3/4] net-lwip: wget: add LMB and buffer checks   Sughosh Ganu
• [PATCH v5 4/4] net-lwip: tftp: add LMB and buffer checks   Sughosh Ganu
• [PATCH] mtd: mtdparts: calculate mtd partition offset before calculating size   Weijie Gao
• [PATCH] common: board: fix build condition of noncached memory initcall   Weijie Gao
• [SPAM][REGRESSION] [PATCH v6 0/3] Static initcalls   Weijie Gao
• [PATCH v2 5/6] dt-bindings: clock: drop NUM_CLOCKS define for EN7581   Sumit Garg
• [PATCH] hmibsc_defconfig: disable DM_USB_GADGET   Sumit Garg
• [PATCH 4/5] clk: stub: add qcom,glink-smd-rpm   Sumit Garg
• [PATCH 0/2] RB1 fixes   Sumit Garg
• [PATCH 1/2] arm: dts: Add override for RB1   Sumit Garg
• [PATCH 2/2] qcom_defconfig: Disable MMC HS200 mode support   Sumit Garg
• [PATCH 0/2] RB1 fixes   Sumit Garg
• [PATCH 1/2] arm: dts: Add override for RB1   Sumit Garg
• [PATCH 2/2] qcom_defconfig: Disable MMC HS200 mode support   Sumit Garg
• [PATCH 2/2] qcom_defconfig: Disable MMC HS200 mode support   Sumit Garg
• [PATCH 1/2] arm: dts: Add override for RB1   Sumit Garg
• [PATCH 1/2] arm: dts: Add override for RB1   Sumit Garg
• [PATCH 2/2] qcom_defconfig: Disable MMC HS200 mode support   Sumit Garg
• [PATCH v2 0/2] RB1 fixes   Sumit Garg
• [PATCH v2 1/2] qcom_defconfig: Disable MMC HS200 mode support   Sumit Garg
• [PATCH v2 2/2] phy: phy-qcom-qusb2: Fix USB PHY power on sequence   Sumit Garg
• [PATCH 1/2] arm: dts: Add override for RB1   Sumit Garg
• [PATCH 0/6] Qualcomm: cleanup OF_LIVE fixup and fix RB1/2   Sumit Garg
• [PATCH 1/6] event: signal when livetree has been built   Sumit Garg
• [PATCH 2/6] mach-snapdragon: use EVT_OF_LIVE_INIT to apply DT fixups   Sumit Garg
• [PATCH 3/6] mach-snapdragon: of_fixup: skip disabled USB nodes   Sumit Garg
• [PATCH 4/6] clk/qcom: qcm2290: show clock name in set_rate()   Sumit Garg
• [PATCH 5/6] mach-snapdragon: of_fixup: set dr_mode for RB1/2 boards   Sumit Garg
• [PATCH 6/6] pinctrl: qcom: qcm2290: fix off by 1 in pin_count   Sumit Garg
• [PATCH v2] pinctrl: qcom: handle reserved ranges   Sumit Garg
• [PATCH] mach-snapdragon: Update fdtfile logic to work for RB1 and RB2   Sumit Garg
• [PATCH v2 00/13] Enable OF_UPSTREAM for STM32 and STi platforms   Sumit Garg
• [PATCH v3] watchdog: qcom: introduce qcom-wdt driver   Sumit Garg
• [PATCH v2 0/6] clk: qcom: apq8016: Clock fixes for U-Boot v2025.07   Sumit Garg
• [PATCH 0/3] board: dragonboard410c: More fixes for U-Boot v2025.07   Sumit Garg
• [PATCH v1 1/3] mach-snapdragon: Do not define reset_cpu() if SYSRESET is enabled   Sumit Garg
• [PATCH v1 2/3] sysreset: Implement PSCI based reset to EDL mode for QCOM SoCs   Sumit Garg
• [PATCH v1 3/3] configs: qcs9100_defconfig: Enable SYSRESET   Sumit Garg
• [EXT] [PATCH] crypto: fsl - Fix RNG generation for lengths greater than 16 bytes   Horia Geanta
• [EXT] [PATCH] crypto: fsl - Fix RNG generation for lengths greater than 16 bytes   Horia Geanta
• [PATCH 0/6] usb: host: ehci-msm: Clean up and fix crashes   Stephan Gerhold
• [PATCH 1/6] usb: host: ehci-msm: Fix pointer check   Stephan Gerhold
• [PATCH 2/6] usb: host: echi-msm: Drop ulpi definitions   Stephan Gerhold
• [PATCH 3/6] usb: host: ehci-msm: Disable clocks after all register accesses   Stephan Gerhold
• [PATCH 4/6] usb: host: ehci-msm: Use clk bulk helpers   Stephan Gerhold
• [PATCH 5/6] usb: host: ehci-msm: Drop redundant EHCI register writes   Stephan Gerhold
• [PATCH 6/6] usb: host: ehci-msm: Register ULPI PHY through NOP wrapper   Stephan Gerhold
• [PATCH] IOMUX: Fix stopping unused dropped consoles   Stephan Gerhold
• [PATCH 0/3] usb: gadget: Fix issues when using f_acm with ci_udc   Stephan Gerhold
• [PATCH 1/3] usb: gadget: f_acm: Claim requested USB endpoints   Stephan Gerhold
• [PATCH 2/3] usb: gadget: f_acm: Allow restarting ACM console after stopping it   Stephan Gerhold
• [PATCH 3/3] usb: gadget: introduce 'enabled' flag in struct usb_ep   Stephan Gerhold
• [PATCH 00/13] board: dragonboard410c: Various fixes and cleanup   Stephan Gerhold
• [PATCH 01/13] mach-snapdragon: Fix EL2 boot on DragonBoard 410c   Stephan Gerhold
• [PATCH 02/13] board: dragonboard410c: Fix RAM size   Stephan Gerhold
• [PATCH 03/13] board: dragonboard410c: Fix BD address   Stephan Gerhold
• [PATCH 04/13] board: dragonboard410c: Drop UNSTUFF_BITS() macro   Stephan Gerhold
• [PATCH 05/13] board: dragonboard410c: Drop reflash functionality   Stephan Gerhold
• [PATCH 06/13] board: dragonboard410c: Drop unused linux_image   Stephan Gerhold
• [PATCH 07/13] board: dragonboard410c: Use dynamically allocated load addresses   Stephan Gerhold
• [PATCH 08/13] board: dragonboard410c: Fix counter frequency   Stephan Gerhold
• [PATCH 09/13] board: dragonboard410c: Enable RTL8152 ethernet   Stephan Gerhold
• [PATCH 10/13] board: dragonboard410c: Use BOOTSTD instead of DISTRO_DEFAULTS   Stephan Gerhold
• [PATCH 11/13] board: dragonboard410c: Enable support for Android boot images   Stephan Gerhold
• [PATCH 12/13] board: dragonboard410c: Use button_cmd instead of custom code   Stephan Gerhold
• [PATCH 13/13] board: dragonboard410c: Update maintainers   Stephan Gerhold
• [PATCH 11/13] board: dragonboard410c: Enable support for Android boot images   Stephan Gerhold
• [PATCH 1/3] usb: udc: ci: support USB gadget driver model   Stephan Gerhold
• [PATCH 2/3] usb: host: ehci-msm: Register ChipIdea UDC from glue wrapper   Stephan Gerhold
• [PATCH 3/3] qcom_defconfig: Enable MSM8916 USB PHY + ChipIdea UDC   Stephan Gerhold
• [PATCH 0/3] board: dragonboard410c: More fixes for U-Boot v2025.07   Stephan Gerhold
• [PATCH 1/3] board: dragonboard410c: Fix button cmd name   Stephan Gerhold
• [PATCH 2/3] board: dragonboard410c: Drop custom reduced malloc size   Stephan Gerhold
• [PATCH 3/3] board: dragonboard410c: Enable support for KASLR in Linux   Stephan Gerhold
• [PATCH 0/6] clk: qcom: apq8016: Clock fixes for U-Boot v2025.07   Stephan Gerhold
• [PATCH 1/6] clk: qcom: apq8016: Fix SDCC clock addresses   Stephan Gerhold
• [PATCH 2/6] clk: qcom: Move qcom_gate_clk_en() to C file   Stephan Gerhold
• [PATCH 3/6] clk: qcom: Use setbits_le32() for qcom_gate_clk_en()   Stephan Gerhold
• [PATCH 4/6] clk: qcom: Allow polling for clock status in qcom_gate_clk_en()   Stephan Gerhold
• [PATCH 5/6] clk: qcom: apq8016: Convert GATE_CLK() to BRANCH_CLK()   Stephan Gerhold
• [PATCH 6/6] clk: qcom: apq8016: Fix SDCC clock warnings   Stephan Gerhold
• [PATCH v2 0/6] clk: qcom: apq8016: Clock fixes for U-Boot v2025.07   Stephan Gerhold
• [PATCH v2 1/6] clk: qcom: apq8016: Fix SDCC clock addresses   Stephan Gerhold
• [PATCH v2 2/6] clk: qcom: Move qcom_gate_clk_en() to C file   Stephan Gerhold
• [PATCH v2 3/6] clk: qcom: Use setbits_le32() for qcom_gate_clk_en()   Stephan Gerhold
• [PATCH v2 4/6] clk: qcom: Allow polling for clock status in qcom_gate_clk_en()   Stephan Gerhold
• [PATCH v2 5/6] clk: qcom: apq8016: Convert GATE_CLK() to GATE_CLK_POLLED()   Stephan Gerhold
• [PATCH v2 6/6] clk: qcom: apq8016: Fix SDCC clock warnings   Stephan Gerhold
• [PATCH v1] toradex: tdx-cfg-block: fix verdin imx95 sku 0089 pid4   Emanuele Ghidoli
• [PATCH 00/12] lwIP sandbox tests   Simon Glass
• [RFC PATCH 1/2 v2] tools: binman: control.py: Propagate bootph-* properties to supernodes   Simon Glass
• [PATCH v3 19/31] rockchip: Provide a VPL phase on rk3399   Simon Glass
• [PATCH v2 00/56] expo: Various features and improvements   Simon Glass
• Rate of innovation in the project (Was: Re: Rate of change in the project)   Simon Glass
• [PATCH 01/17] fs: boot: Update fs_read_alloc() to use abuf   Simon Glass
• [PATCH v4 1/1] efi_loader: expose the device-tree file name   Simon Glass
• [PATCH] log: Add helpers for calling log_msg_ret() et al   Simon Glass
• [PATCH 09/17] test/py: Add a test image for Ubuntu   Simon Glass
• [PATCH v3 1/2] CI: Move default image under global defaults   Simon Glass
• Suggestions for Custom U-Boot Project   Simon Glass
• [PATCH v4 0/5] rpi: Tidy up booting   Simon Glass
• [PATCH] Revert "net: eth_bootdev_hunt() should not run DHCP"   Simon Glass
• Re: U-Boot interferes with initrd binary — Revert "efi: Correct smbios-table installation" ?   Simon Glass
• [PATCH 00/17] bootstd: Useability improvements   Simon Glass
• [PATCH 00/13] video: Enhancements related to truetype and console   Simon Glass
• [PATCH 01/13] console: Support a format string for stderr output   Simon Glass
• [PATCH 02/13] video: Make white-on-black a video-device property   Simon Glass
• [PATCH 03/13] sandbox: Select white-on-black   Simon Glass
• [PATCH 04/13] video: Add a test for font measurement   Simon Glass
• [PATCH 05/13] video: Begin support for measuring multiple lines of text   Simon Glass
• [PATCH 06/13] video: truetype: Fill in the measured line   Simon Glass
• [PATCH 07/13] video: truetype: Support newlines in the measured string   Simon Glass
• [PATCH 08/13] video: truetype: Support a limit on the width of a line   Simon Glass
• [PATCH 09/13] video: Add a way to write a partial string to the console   Simon Glass
• [PATCH 10/13] test: video: Export the video-checking functions   Simon Glass
• [PATCH 11/13] video: Allow console output to be silenced   Simon Glass
• [PATCH 12/13] video: Add a function to draw a rectangle   Simon Glass
• [PATCH 13/13] vidconsole: Avoid kerning against an unrelated character   Simon Glass
• [PATCH 09/17] test/py: Add a test image for Ubuntu   Simon Glass
• [PATCH 00/12] lwIP sandbox tests   Simon Glass
• [PATCH v3 19/31] rockchip: Provide a VPL phase on rk3399   Simon Glass
• [PATCH] Revert "net: eth_bootdev_hunt() should not run DHCP"   Simon Glass
• [PATCH] tpm: cr50: Support opening the TPM multiple times   Simon Glass
• [PATCH 00/13] video: Enhancements related to truetype and console   Simon Glass
• RISC-V UEFI/ACPI on QEMU regression?   Simon Glass
• [PATCH 00/13] video: Enhancements related to truetype and console   Simon Glass
• [PATCH] tpm: cr50: Support opening the TPM multiple times   Simon Glass
• Rate of innovation in the project (Was: Re: Rate of change in the project)   Simon Glass
• [RFC PATCH 1/2 v2] tools: binman: control.py: Propagate bootph-* properties to supernodes   Simon Glass
• [PATCH v5 38/46] boot: Consider non-bootable partitions   Simon Glass
• [PATCH 00/12] lwIP sandbox tests   Simon Glass
• [PATCH v5 40/46] boot: Support IO UARTs for earlycon and console   Simon Glass
• [PATCH 3/6] test: Add a test for strim()   Simon Glass
• [PATCH] Revert "net: eth_bootdev_hunt() should not run DHCP"   Simon Glass
• RISC-V UEFI/ACPI on QEMU regression?   Simon Glass
• [PATCH v5 40/46] boot: Support IO UARTs for earlycon and console   Simon Glass
• [PATCH 00/13] video: Enhancements related to truetype and console   Simon Glass
• Rate of innovation in the project (Was: Re: Rate of change in the project)   Simon Glass
• [PATCH] fdt: Allow OF_HAS_PRIOR_STAGE to be disabled in defconfig   Simon Glass
• Re: U-Boot interferes with initrd binary — Revert "efi: Correct smbios-table installation" ?   Simon Glass
• [PATCH 0/4] bloblist: fdt: Clean up the code   Simon Glass
• [PATCH 00/13] video: Enhancements related to truetype and console   Simon Glass
• [PATCH 2/4] fdt: Introduce OF_BLOBLIST   Simon Glass
• [PATCH v5 40/46] boot: Support IO UARTs for earlycon and console   Simon Glass
• [PATCH] log: Add helpers for calling log_msg_ret() et al   Simon Glass
• [PATCH] log: Add helpers for calling log_msg_ret() et al   Simon Glass
• [PATCH 0/4] bloblist: fdt: Clean up the code   Simon Glass
• [PATCH] fdt: Allow OF_HAS_PRIOR_STAGE to be disabled in defconfig   Simon Glass
• [PATCH 0/4] bloblist: fdt: Clean up the code   Simon Glass
• [PATCH v5 00/29] pxe: Precursor series for supporting read_all() in extlinux / PXE   Simon Glass
• [PATCH 0/4] bloblist: fdt: Clean up the code   Simon Glass
• [PATCH v6 1/4] spl: remove usage of CMD_BOOTx from image parsing   Simon Glass
• Re: U-Boot interferes with initrd binary — Revert "efi: Correct smbios-table installation" ?   Simon Glass
• [PATCH 0/4] bloblist: fdt: Clean up the code   Simon Glass
• [PATCH 0/4] bloblist: fdt: Clean up the code   Simon Glass
• [PATCH v2] emulation: fdt: Allow using U-Boot's device tree with QEMU   Simon Glass
• [PATCH v3] hw/arm/virt: Allow additions to the generated device tree   Simon Glass
• [PATCH] x86: efi_loader: Ensure the SMBIOS tables are sent via EFI   Simon Glass
• SMBIOS tables missing on 2025.04-rc5 on qemu-x86   Simon Glass
• [PATCH 1/1] efi_loader: stop network in EXIT_BOOT_SERVICES   Simon Glass
• [PATCH v5 00/29] pxe: Precursor series for supporting read_all() in extlinux / PXE   Simon Glass
• [PATCH v2 6/8] [RFC] CI: add U-Boot testing on real HW with tbot   Simon Glass
• Re: U-Boot interferes with initrd binary — Revert "efi: Correct smbios-table installation" ?   Simon Glass
• [PATCH 1/3] net: designware: Disable DMA on removal   Simon Glass
• [PATCH 2/3] designware: Use the remove() method with related drivers   Simon Glass
• [PATCH 3/3] efi_loader: Move device-removal later in exit-boot-services   Simon Glass
• [PATCH 1/3] net: designware: Disable DMA on removal   Simon Glass
• [PATCH 2/3] designware: Use the remove() method with related drivers   Simon Glass
• [PATCH v5 00/29] pxe: Precursor series for supporting read_all() in extlinux / PXE   Simon Glass
• Rate of innovation in the project (Was: Re: Rate of change in the project)   Simon Glass
• [PATCH 0/4] bloblist: fdt: Clean up the code   Simon Glass
• [PATCH 0/4] bloblist: fdt: Clean up the code   Simon Glass
• [PATCH 2/3] designware: Use the remove() method with related drivers   Simon Glass
• [PATCH 0/4] bloblist: fdt: Clean up the code   Simon Glass
• [PATCH 3/3] efi_loader: Move device-removal later in exit-boot-services   Simon Glass
• [PATCH v5 00/29] pxe: Precursor series for supporting read_all() in extlinux / PXE   Simon Glass
• [PATCH v2 0/4] dm: net: Assorted patches related to networking and DMA   Simon Glass
• [PATCH v2 1/4] designware: Use the remove() method with related drivers   Simon Glass
• [PATCH v2 2/4] net: designware: Mark drivers as having active DMA   Simon Glass
• [PATCH v2 3/4] efi_loader: Move device-removal later in exit-boot-services   Simon Glass
• [PATCH v2 4/4] dm: core: Rename dm_remove_devices_active()   Simon Glass
• Rate of innovation in the project (Was: Re: Rate of change in the project)   Simon Glass
• [PATCH v2 3/4] efi_loader: Move device-removal later in exit-boot-services   Simon Glass
• [PATCH v2 4/4] dm: core: Rename dm_remove_devices_active()   Simon Glass
• [PATCH RFC] fdt.c: fdt chosen cmd had off-by-one issue   Simon Glass
• [PATCH 2/2] riscv: Provide __image_copy_{start_end} symbols in linkerscript   Simon Glass
• [PATCH 1/2] spl: riscv: Disable SPL_BINMAN_UBOOT_SYMBOLS by default   Simon Glass
• [PATCH 0/5] patman: Separate gitutil fully   Simon Glass
• [PATCH 1/5] patman: Untangle settings from gitutil   Simon Glass
• [PATCH 2/5] patman: Pass the alias dict into gitutil.build_email_list()   Simon Glass
• [PATCH 3/5] patman: Pass the alias dict into gitutil.email_patches()   Simon Glass
• [PATCH 4/5] patman: Pass aliases to Series.MakeCcFile()   Simon Glass
• [PATCH 5/5] patman: Update Series.ShowActions() to pass alias   Simon Glass
• [PATCH v5 00/29] pxe: Precursor series for supporting read_all() in extlinux / PXE   Simon Glass
• [PATCH v5 00/29] pxe: Precursor series for supporting read_all() in extlinux / PXE   Simon Glass
• [PATCH v2 4/4] dm: core: Rename dm_remove_devices_active()   Simon Glass
• [PATCH 0/4] bloblist: fdt: Clean up the code   Simon Glass
• [PATCH 0/4] bloblist: fdt: Clean up the code   Simon Glass
• [PATCH v5 00/29] pxe: Precursor series for supporting read_all() in extlinux / PXE   Simon Glass
• [PATCH 0/5] patman: Separate gitutil fully   Simon Glass
• [PATCH 0/5] patman: Separate gitutil fully   Simon Glass
• [PATCH 2/2] riscv: Provide __image_copy_{start_end} symbols in linkerscript   Simon Glass
• [PATCH v4 08/10] rockchip: binman: Use the skip-at-start prop in simple-bin image   Simon Glass
• [PATCH v4 07/10] rockchip: binman: Include a compatible string in each configuration   Simon Glass
• [PATCH v4 08/10] rockchip: binman: Use the skip-at-start prop in simple-bin image   Simon Glass
• [PATCH v4 08/10] rockchip: binman: Use the skip-at-start prop in simple-bin image   Simon Glass
• [PATCH] boot: Add missing code for bootz_run()   Simon Glass
• [PATCH v4 09/10] rockchip: binman: Support use of crc32 for SPL_FIT_SIGNATURE   Simon Glass
• [PATCH] RFC: ext4: Add a few overflow checks in the writing code   Simon Glass
• [PATCH 1/6] event: signal when livetree has been built   Simon Glass
• [PATCH v2 0/8] binman: Check code-coverage requirements   Simon Glass
• [PATCH v2 1/8] binman: Add coverage to requirements   Simon Glass
• [PATCH v2 2/8] binman: Exclude dist-packages and site-packages   Simon Glass
• [PATCH v2 3/8] binman: Drop GetRootSkipAtStart()   Simon Glass
• [PATCH v2 4/8] binman: fit: Drop unused code   Simon Glass
• [PATCH v2 5/8] binman: Drop algo check in CheckSetHashValue()   Simon Glass
• [PATCH v2 6/8] binman: Workaround lz4 cli padding in test cases   Simon Glass
• [PATCH v2 7/8] binman: Work around missing test coverage   Simon Glass
• [PATCH v2 8/8] CI: Run code-coverage test for Binman   Simon Glass
• [PATCH 1/6] event: signal when livetree has been built   Simon Glass
• [PATCH 1/6] event: signal when livetree has been built   Simon Glass
• [PATCH 5/7] binman: Workaround lz4 cli padding in test cases   Simon Glass
• [PATCH 1/6] event: signal when livetree has been built   Simon Glass
• [PATCH] x86: efi_loader: Ensure the SMBIOS tables are sent via EFI   Simon Glass
• [PATCH v2 1/8] event: signal when livetree has been built   Simon Glass
• [PATCH 1/6] event: signal when livetree has been built   Simon Glass
• [RFC PATCH v1 1/7] efi_loader: make efi_exit_boot_services() call bootstage_report()   Simon Glass
• [RFC PATCH v1 1/7] efi_loader: make efi_exit_boot_services() call bootstage_report()   Simon Glass
• [PATCH 09/17] test/py: Add a test image for Ubuntu   Simon Glass
• [PATCH 0/4] bloblist: fdt: Clean up the code   Simon Glass
• [PATCH 1/2] bootstd: Add implementation for bootmeth rauc   Simon Glass
• [RFC PATCH 1/2 v2] tools: binman: control.py: Propagate bootph-* properties to supernodes   Simon Glass
• [PATCH 0/4] bloblist: fdt: Clean up the code   Simon Glass
• [PATCH 0/4] bloblist: fdt: Clean up the code   Simon Glass
• [PATCH 0/4] bloblist: fdt: Clean up the code   Simon Glass
• [PATCH 0/4] bloblist: fdt: Clean up the code   Simon Glass
• [PATCH 0/4] bloblist: fdt: Clean up the code   Simon Glass
• [u-boot-test-hooks PATCH 1/2] travis-ci: Add qemu_arm/64_spl board   Simon Glass
• [u-boot-test-hooks PATCH 2/2] ellemere: Add qemu_arm/64_spl board   Simon Glass
• [PATCH 0/4] bloblist: fdt: Clean up the code   Simon Glass
• [PATCH 0/4] bloblist: fdt: Clean up the code   Simon Glass
• [PATCH] cros_ec_sandbox.c: Drop spi.h include   Simon Glass
• [PATCH] bloblist: Drop BSD license   Simon Glass
• [PATCH] bloblist: Drop BSD license   Simon Glass
• [PATCH v3 00/22] passage: Define a standard for firmware data flow   Simon Glass
• [PATCH v3 01/22] RFC: scripts: Add a script for running QEMU   Simon Glass
• [PATCH v3 02/22] emulation: fdt: Allow using U-Boot's device tree with QEMU   Simon Glass
• [PATCH v3 03/22] spl: Tidy up the header includes   Simon Glass
• [PATCH v3 04/22] x86: Move Intel GNVS file into the common include directory   Simon Glass
• [PATCH v3 05/22] spl: Rename jump_to_image_no_args()   Simon Glass
• [PATCH v3 06/22] passage: Support an incoming passage   Simon Glass
• [PATCH v3 07/22] fdt: Redo devicetree setup   Simon Glass
• [PATCH v3 08/22] fdt: Support reading FDT from standard passage   Simon Glass
• [PATCH v3 09/22] bloblist: Adjust how the bloblist is received from passage   Simon Glass
• [PATCH v3 10/22] passage: arm: Accept a passage from the previous phase   Simon Glass
• [PATCH v3 11/22] passage: spl: Support adding the dtb to the passage bloblist   Simon Glass
• [PATCH v3 12/22] passage: spl: Support passing the passage to U-Boot   Simon Glass
• [PATCH v3 13/22] passage: arm: Add the arch-specific standard passage impl   Simon Glass
• [PATCH v3 14/22] arm: qemu: Add an SPL build   Simon Glass
• [PATCH v3 15/22] arm: qemu: Add a 64-bit SPL build   Simon Glass
• [PATCH v3 16/22] xferlist: Drop old xferlist code   Simon Glass
• [PATCH v3 17/22] passage: Add a qemu test for ARM   Simon Glass
• [PATCH v3 18/22] sandbox: Add a way of checking structs for standard passage   Simon Glass
• [PATCH v3 19/22] passage: Add documentation   Simon Glass
• [PATCH v3 20/22] passage: Add docs for spl_handoff   Simon Glass
• [PATCH v3 21/22] passage: Add checks for pre-existing blobs   Simon Glass
• [PATCH v3 22/22] CI: Add tests for gitlab and azure   Simon Glass
• [PATCH 0/4] bloblist: fdt: Clean up the code   Simon Glass
• [PATCH v2] emulation: fdt: Allow using U-Boot's device tree with QEMU   Simon Glass
• [PATCH v2 1/3] riscv: dts: binman.dtsi: Switch to u-boot-nodtb entry for proper U-Boot   Simon Glass
• [PATCH v4 08/10] rockchip: binman: Use the skip-at-start prop in simple-bin image   Simon Glass
• [PATCH v2 1/8] event: signal when livetree has been built   Simon Glass
• [PATCH v2 1/3] buildman: allow specifying configuration fragments   Simon Glass
• [PATCH v2 2/3] doc/buildman: describe using fragments   Simon Glass
• [PATCH v2 3/3] buildman: unit test for configuration fragments   Simon Glass
• [PATCH 1/2] tools: binman: etype: fit: raise ValueError if key-name-hint is a path   Simon Glass
• [PATCH v7 1/4] spl: remove usage of CMD_BOOTx from image parsing   Simon Glass
• [PATCH v3 00/22] passage: Define a standard for firmware data flow   Simon Glass
• [PATCH v2] emulation: fdt: Allow using U-Boot's device tree with QEMU   Simon Glass
• [PATCH v3 00/22] passage: Define a standard for firmware data flow   Simon Glass
• [PATCH 0/4] bloblist: fdt: Clean up the code   Simon Glass
• [PATCH 0/4] bloblist: fdt: Clean up the code   Simon Glass
• [PATCH v2 1/3] Bring in linux/limits.h   Simon Glass
• [PATCH v2 2/3] Bring in linux/overflow.h   Simon Glass
• [PATCH v2 3/3] ext4: Add a few overflow checks in the writing code   Simon Glass
• [PATCH v2 1/3] buildman: allow specifying configuration fragments   Simon Glass
• [PATCH v4 3/3] doc/buildman: describe using fragments   Simon Glass
• [PATCH v4 1/3] buildman: allow specifying configuration fragments   Simon Glass
• [PATCH v4 2/3] buildman: unit test for configuration fragments   Simon Glass
• [PATCH 0/3] booti: Remove the SYS_BOOTM_LEN limit for booti   Simon Glass
• [PATCH 1/3] boot: Add a function to check if a linux Image is supported   Simon Glass
• [PATCH 2/3] bootm: Add RISC-V support in booti_is_supported()   Simon Glass
• [PATCH 3/3] booti: Allow ignoring SYS_BOOTM_LEN with the booti command   Simon Glass
• [PATCH 0/3] booti: Remove the SYS_BOOTM_LEN limit for booti   Simon Glass
• [PATCH] Revert "power-domain: Add refcounting"   Simon Glass
• [PATCH v2 1/2] binman: etype: fit: raise ValueError if key-name-hint is a path   Simon Glass
• [PATCH v2 2/2] binman: etype: u_boot_spl_pubkey_dtb: provide more explicit error for key-name-hint with path   Simon Glass
• [PATCH v2 1/3] buildman: allow specifying configuration fragments   Simon Glass
• [PATCH v2 1/3] buildman: allow specifying configuration fragments   Simon Glass
• [PATCH] bloblist: Drop BSD license   Simon Glass
• Maintenance of Python tools   Simon Glass
• [PATCH v2 2/2] binman: etype: u_boot_spl_pubkey_dtb: provide more explicit error for key-name-hint with path   Simon Glass
• [PATCH 1/1] boot: BOOTMETH_DISTRO should select BOOTMETH_EFI_BOOTMGR   Simon Glass
• [RFC PATCH 1/2 v2] tools: binman: control.py: Propagate bootph-* properties to supernodes   Simon Glass
• Maintenance of Python tools   Simon Glass
• [RFC] Expected behavior of the go command   Simon Glass
• [RFC 2/8] boot: BOOTMETH_DISTRO should select BOOTMETH_EFI_BOOTMGR   Simon Glass
• [RFC 7/8] efi_loader: create EFI BOOTDEV   Simon Glass
• [PATCH 1/3] tools: binman: control.py: Propagate bootph-* properties to supernodes   Simon Glass
• [PATCH 2/3] tools: binman: ftest.py: Add testcase for bootph-* propagation   Simon Glass
• [PATCH 3/3] wip: binman: Move processing after templates   Simon Glass
• Maintenance of Python tools   Simon Glass
• [RFC] Expected behavior of the go command   Simon Glass
• [PATCH] bootstd: Rework BLK dependency   Simon Glass
• [PATCH v5 0/4] NET_LWIP LMB fixes   Simon Glass
• [PATCH 1/2] bootstd: Add implementation for bootmeth rauc   Simon Glass
• [PATCH v2 2/2] binman: etype: u_boot_spl_pubkey_dtb: provide more explicit error for key-name-hint with path   Simon Glass
• Maintenance of Python tools   Simon Glass
• [PATCH 1/2] bootstd: Add implementation for bootmeth rauc   Simon Glass
• [PATCH] bootstd: Rework BLK dependency   Simon Glass
• bootflow: extlinux and menu   Simon Glass
• [PATCH 1/2] bootstd: Add implementation for bootmeth rauc   Simon Glass
• [PATCH 1/2] tools/make_pip.sh: Use debian packages instead of pip   Simon Glass
• [PATCH 2/2] tools: Update the license specifiers   Simon Glass
• [PATCH 00/30] patman: Move to asyncio and other updates   Simon Glass
• [PATCH 01/30] patman: Move all non-test logic into control module   Simon Glass
• [PATCH 02/30] patman: Move capture_sys_output() into terminal and rename   Simon Glass
• [PATCH 03/30] binman: Correct a typo in the toolpath comment   Simon Glass
• [PATCH 04/30] u_boot_pylib: Allow control of capturing   Simon Glass
• [PATCH 05/30] u_boot_pylib: Improve ANSI-colour output with backgrounds   Simon Glass
• [PATCH 06/30] u_boot_pylib: Add a pager   Simon Glass
• [PATCH 07/30] u_boot_pylib: Avoid concurrent execution of only one test   Simon Glass
• [PATCH 08/30] u_boot_pylib: Allow disabling colour output   Simon Glass
• [PATCH 09/30] tools: Plumb in capture control   Simon Glass
• [PATCH 10/30] patman: Correct a stray quote   Simon Glass
• [PATCH 11/30] patman: Rename test_basic() in test_checkpatch   Simon Glass
• [PATCH 12/30] patman: Tidy up the start-up code   Simon Glass
• [PATCH 13/30] patman: Support extra test features   Simon Glass
• [PATCH 14/30] patman: Move code for sending into its own module   Simon Glass
• [PATCH 15/30] CI: Add a dependency file for patman   Simon Glass
• [PATCH 16/30] patman: Create a module for handling patchwork   Simon Glass
• [PATCH 17/30] patman: Move Patch and Review to patchwork module   Simon Glass
• [PATCH 18/30] patman: Add reading of series and patch status   Simon Glass
• [PATCH 19/30] patman: Rename check_patchwork_status()   Simon Glass
• [PATCH 20/30] patman: Split up check_and_show_status()   Simon Glass
• [PATCH 21/30] patman: Split out the processing of find_new_responses()   Simon Glass
• [PATCH 22/30] patman: Adjust how the fake request() function is provided   Simon Glass
• [PATCH 23/30] patman: Simplify test_find_new_responses()   Simon Glass
• [PATCH 24/30] patman: Show patches in yellow   Simon Glass
• [PATCH 25/30] patman: Add more information to Patch   Simon Glass
• [PATCH 26/30] patman: Use defaultdict directly   Simon Glass
• [PATCH 27/30] patman: Switch over to asyncio   Simon Glass
• [PATCH 28/30] patman: Provide an option to run in single-threaded mode   Simon Glass
• [PATCH 29/30] patman: Use a pager when outputting status   Simon Glass
• [PATCH 30/30] patman: Drop the old status code   Simon Glass
• Missing UTHREAD doc annotations   Simon Glass
• [PATCH 1/2] bootstd: Add implementation for bootmeth rauc   Simon Glass
• [PATCH] x86: efi_loader: Ensure the SMBIOS tables are sent via EFI   Simon Glass
• [PATCH v3 00/22] passage: Define a standard for firmware data flow   Simon Glass
• [PATCH 00/30] patman: Move to asyncio and other updates   Simon Glass
• [PATCH 00/30] patman: Move to asyncio and other updates   Simon Glass
• [PATCH 1/1] bootm: pass kernel load address not entry point for IH_OS_EFI   Simon Glass
• [PATCH 1/1] boot/image-fit: improve 'No Image' message   Simon Glass
• [PATCH 1/1] boot: print the boot stage id in the report   Simon Glass
• [PATCH 1/1] boot: let BOOTSTAGE_RECORD_COUNT default to 50   Simon Glass
• [REGRESSION] [PATCH v6 0/3] Static initcalls   Simon Glass
• [PATCH v3 00/22] passage: Define a standard for firmware data flow   Simon Glass
• [PATCH 1/2] net: Use a forward declaration for cmd_tbl in net-common.h   Simon Glass
• [PATCH 2/2] net: Move env_get_ip() out of the header file   Simon Glass
• [PATCH v3 00/22] passage: Define a standard for firmware data flow   Simon Glass
• [PATCH 1/1] boot: print the boot stage id in the report   Simon Glass
• [PATCH 00/30] patman: Move to asyncio and other updates   Simon Glass
• [PATCH 1/1] boot/image-fit: improve 'No Image' message   Simon Glass
• [REGRESSION] [PATCH v6 0/3] Static initcalls   Simon Glass
• [PATCH 1/1] bootm: pass kernel load address not entry point for IH_OS_EFI   Simon Glass
• [PATCH 1/1] bootm: pass kernel load address not entry point for IH_OS_EFI   Simon Glass
• [PATCH v2 0/6] airoha: Add initial support AN7581   Andreas Gnau
• Gitlab runner timeout on evb-ast2600 ?   Cédric Le Goater
• Gitlab runner timeout on evb-ast2600 ?   Cédric Le Goater
• Gitlab runner timeout on evb-ast2600 ?   Cédric Le Goater
• [PATCH] Revert "CI: Disable evb-ast2600"   Cédric Le Goater
• [PATCH] firmware: ti_sci: Scan all device instances when releasing exclusive devices   Dhruva Gole
• [PATCH V2] firmware: ti_sci: Scan all device instances when releasing exclusive devices   Dhruva Gole
• [PATCH] doc: board: ti: Add optee rng support   Dhruva Gole
• [PATCH 1/1] net: phy: Add the Airoha EN8811H PHY driver   Daniel Golle
• [PATCH v8 17/19] doc: imx: add document for i.MX95 Image Container Format   Gres, Anton
• [PATCH v2 6/7] configs: rockchip: Enable ethernet driver on RK356x boards   Diederik de Haas
• [PATCH v2 6/7] configs: rockchip: Enable ethernet driver on RK356x boards   Diederik de Haas
• [PATCH] configs: meson64: move DFU step at the end to give the board a chance to boot something on storage   Ferass El Hafidi
• [PATCH] board: rockchip: Add LCKFB TaishanPi RK3566 Board   Jiehui He
• [PATCH v2] board: rockchip: Add LCKFB TaishanPi RK3566 Board   Jiehui He
• [PATCH 1/1] Makefile: pass KEYDIR when set to sunxi-spl.bin mkimage   James Hilliard
• [PATCH] net: dwc_eth_qos: Fix hang when freeing packet after stop   Samuel Holland
• [PATCH] smbios: Do not look up children of invalid nodes   Samuel Holland
• [PATCH v6 05/12] power-domain: Add refcounting   Samuel Holland
• [PATCH v1 2/2] board: starfive: visionfive2: Drop setting of $fdtfile   Samuel Holland
• Flashing U-boot on a Google Nexus 7 2012 (grouper)   Nathaniel Hourt
• Build for RISC-V with LLVM   Nathaniel Hourt
• [PATCH v2 2/3] ARM: dts: sam9x60: Add USB gadget DT node.   Eugen Hristev
• [PULL] u-boot-at91-fixes-2025.04-a   Eugen Hristev
• sama5d27: Replacing at91bootstrap with U-Boot SPL   Eugen Hristev
• [PATCH] board: atmel: sama5d2_wlsom1_ek: Fix spurious serial output   Eugen Hristev
• [PATCH v2 1/2] board: atmel: sama5d2_wlsom1_ek: Fix spurious serial output   Eugen Hristev
• Gitlab runner timeout on evb-ast2600 ?   Eugen Hristev
• [PATCH] configs: sama5d27_wlsom1_ek: Select CONFIG_NET_RANDOM_ETHADDR   Eugen Hristev
• [PATCH v2 1/2] board: atmel: sama5d2_wlsom1_ek: Fix spurious serial output   Eugen Hristev
• [PATCH] configs: sama5d27_wlsom1_ek: Select CONFIG_NET_RANDOM_ETHADDR   Eugen Hristev
• [PATCH 1/7] arm: at91: wdt: Remove unused at91_wdt struct   Eugen Hristev
• [PATCH] ARM: dts: at91: sama5d2: Pass bootph-all to the PIT timer   Eugen Hristev
• (subset) [PATCH v2 1/3] usb: gadget: atmel: Add SAM9X60 support   Eugen Hristev
• [PATCH] ARM: dts: at91: sama5d2: Pass bootph-all to the PIT timer   Eugen Hristev
• [PULL] u-boot-at91-2025.07-b   Eugen Hristev
• [PATCH v2 7/8] ARM: dts: sam9x60: Add watchdog DT node.   Eugen Hristev
• [PATCH v2 2/8] arm: at91: wdt: Remove unused at91_wdt struct   Eugen Hristev
• [PATCH v2 8/8] ARM: dts: at91: sam9x60-curiosity: Enable watchdog node   Eugen Hristev
• [PATCH v2 6/8] watchdog: at91sam9_wdt: Add SAM9X60 support   Eugen Hristev
• [PATCH v2 8/8] ARM: dts: at91: sam9x60-curiosity: Enable watchdog node   Eugen Hristev
• [PATCH v3 5/6] ARM: dts: sam9x60: Add watchdog DT node   Eugen Hristev
• [PATCH 1/2] efi_loader: Move public cert for capsules to .rodata   Jon Humphreys
• [PATCH v4 0/3] EFI Capsule update explicitly sets dfu_alt_info   Jon Humphreys
• [PATCH 8/9] configs: am67a_beagley_ai_a53: Enable additional features   Jon Humphreys
• [PATCH 0/9] board: beagle: beagley-ai: Cleanups and   Jon Humphreys
• [PATCH v3 00/12] Rockchip VOP2 support   Dang Huynh
• [PATCH v3 01/12] video: rockchip: dw-mipi-dsi: Depend on CONFIG_VIDEO_BRIDGE   Dang Huynh
• [PATCH v3 02/12] video: rockchip: dw_mipi_dsi: Improve pixel clock calculations   Dang Huynh
• [PATCH v3 03/12] video: rockchip: dw_mipi_dsi: Proceed when external PHY is not defined   Dang Huynh
• [PATCH v3 04/12] video: rockchip: dw-mipi-dsi: Add get_display_timing support   Dang Huynh
• [PATCH v3 05/12] video: Add BOE TH101MB31IG002-28A MIPI-DSI panel   Dang Huynh
• [PATCH v3 06/12] video: rockchip: Add VOP2 support   Dang Huynh
• [PATCH v3 07/12] video: rockchip: vop2: Add video bridge support   Dang Huynh
• [PATCH v3 08/12] dts: rockchip: rk356x: Prerelocate VOP in U-Boot proper   Dang Huynh
• [PATCH v3 09/12] configs: quartz64: Enable vidconsole   Dang Huynh
• [PATCH v3 10/12] video: rockchip: Add HDMI support for RK3568   Dang Huynh
• [PATCH v3 11/12] configs: pinetab2-rk3566: Enable video and USB keyboard   Dang Huynh
• [PATCH v3 12/12] clk: rockchip: rk3568: Use assigned VPLL clock when possible   Dang Huynh
• [PATCH v3 08/12] dts: rockchip: rk356x: Prerelocate VOP in U-Boot proper   Dang Huynh
• [PATCH v3 11/12] configs: pinetab2-rk3566: Enable video and USB keyboard   Dang Huynh
• [PATCH v3 11/12] configs: pinetab2-rk3566: Enable video and USB keyboard   Dang Huynh
• [PATCH] clk: Fix clk_set_parent() regression   Dang Huynh
• [EXT] [PATCH] crypto: fsl - Fix RNG generation for lengths greater than 16 bytes   Gaurav Jain
• [EXT] [PATCH] crypto: fsl - Fix RNG generation for lengths greater than 16 bytes   Gaurav Jain
• [PATCH] board: rockchip: add Xunlong Orange Pi 5 Max   K900
• [PATCH] net: gem: ignore tx_clk if MII is used   Martin Kaistra
• [PATCH] net: gem: ignore tx_clk if MII is used   Martin Kaistra
• [PATCH v2 3/3] rockchip: rock64-rk3328_defconfig: enable HDMI output and USB keyboard   Jonas Karlman
• [PATCH v3 19/31] rockchip: Provide a VPL phase on rk3399   Jonas Karlman
• [PATCH v5 00/29] pxe: Precursor series for supporting read_all() in extlinux / PXE   Jonas Karlman
• [PATCH v5 00/29] pxe: Precursor series for supporting read_all() in extlinux / PXE   Jonas Karlman
• [PATCH v5 00/29] pxe: Precursor series for supporting read_all() in extlinux / PXE   Jonas Karlman
• [PATCH v2 0/4] Add support for RAM boot from maskrom mode   Jonas Karlman
• [PATCH v2 1/4] rockchip: Move TEXT_BASE to 8 MiB offset from start of DRAM   Jonas Karlman
• [PATCH v2 2/4] rockchip: Add support for RAM boot from maskrom mode   Jonas Karlman
• [PATCH v2 3/4] rockchip: Enable RAM boot using ROCKCHIP_MASKROM_IMAGE   Jonas Karlman
• [PATCH v2 4/4] rockchip: sdram: Add fallback that fixup DRAM gaps on RK3588   Jonas Karlman
• [PATCH 00/11] rockchip: Small cleanups for RK356x and RK3588   Jonas Karlman
• [PATCH 01/11] rockchip: rk3588: Use hptimer reg names in rockchip_stimer_init   Jonas Karlman
• [PATCH 02/11] rockchip: Remove partitions env variable for RK356x   Jonas Karlman
• [PATCH 03/11] rockchip: Remove partitions env variable for RK3588   Jonas Karlman
• [PATCH 04/11] rockchip: Ensure device settings is defined before rk3568_common.h   Jonas Karlman
• [PATCH 05/11] rockchip: Ensure device settings is defined before rk3588_common.h   Jonas Karlman
• [PATCH 06/11] rockchip: Use rk3568_common.h by default for RK356x boards   Jonas Karlman
• [PATCH 07/11] rockchip: Use rk3588_common.h by default for RK3588 boards   Jonas Karlman
• [PATCH 08/11] rockchip: rk3568: Drop BOARD_LATE_INIT from target config   Jonas Karlman
• [PATCH 09/11] rockchip: rk3588: Drop BOARD_LATE_INIT from target config   Jonas Karlman
• [PATCH 10/11] rockchip: Enable meminfo and rng commands for Generic RK3566/RK3568   Jonas Karlman
• [PATCH 11/11] rockchip: Enable meminfo and rng commands for Generic RK3588   Jonas Karlman
• [PATCH 1/3] net: designware: Disable DMA on removal   Jonas Karlman
• [PATCH 2/3] designware: Use the remove() method with related drivers   Jonas Karlman
• [PATCH 2/3] designware: Use the remove() method with related drivers   Jonas Karlman
• [PATCH v2 6/7] configs: rockchip: Enable ethernet driver on RK356x boards   Jonas Karlman
• [PATCH 2/2] riscv: Provide __image_copy_{start_end} symbols in linkerscript   Jonas Karlman
• [PATCH 1/2] spl: riscv: Disable SPL_BINMAN_UBOOT_SYMBOLS by default   Jonas Karlman
• [PATCH v2 00/30] rockchip: Add initial support for RK3528   Jonas Karlman
• [PATCH v2 01/30] dt-bindings: clock: Document clock and reset unit of RK3528   Jonas Karlman
• [PATCH v2 02/30] arm64: dts: rockchip: Add clock generators for RK3528 SoC   Jonas Karlman
• [PATCH v2 03/30] arm64: dts: rockchip: Add UART clocks for RK3528 SoC   Jonas Karlman
• [PATCH v2 04/30] arm64: dts: rockchip: Add pinctrl and gpio nodes for RK3528   Jonas Karlman
• [PATCH v2 05/30] arm64: dts: rockchip: Add rk3528 QoS register node   Jonas Karlman
• [PATCH v2 06/30] arm64: dts: rockchip: enable SCMI clk for RK3528 SoC   Jonas Karlman
• [PATCH v2 07/30] arm64: dts: rockchip: Add SARADC node for RK3528   Jonas Karlman
• [PATCH v2 08/30] arm64: dts: rockchip: Add SDHCI controller for RK3528   Jonas Karlman
• [PATCH v2 09/30] arm64: dts: rockchip: Add uart0 pinctrl to Radxa E20C   Jonas Karlman
• [PATCH v2 10/30] arm64: dts: rockchip: Add leds node to Radxa E20C   Jonas Karlman
• [PATCH v2 11/30] arm64: dts: rockchip: Add user button to Radxa E20C   Jonas Karlman
• [PATCH v2 12/30] arm64: dts: rockchip: Add maskrom button to Radxa E20C   Jonas Karlman
• [PATCH v2 13/30] arm64: dts: rockchip: Enable onboard eMMC on Radxa E20C   Jonas Karlman
• [PATCH v2 14/30] rockchip: mkimage: Add support for RK3528   Jonas Karlman
• [PATCH v2 15/30] ram: rockchip: Add basic support for RK3528   Jonas Karlman
• [PATCH v2 16/30] clk: rockchip: Add support for RK3528   Jonas Karlman
• [PATCH v2 17/30] pinctrl: rockchip: Add support for RK3528   Jonas Karlman
• [PATCH v2 18/30] arm: dts: rockchip: Add rk3528-u-boot.dtsi   Jonas Karlman
• [PATCH v2 19/30] arch: arm: rockchip: Add initial support for RK3528   Jonas Karlman
• [PATCH v2 20/30] mmc: rockchip_sdhci: Extend variant configuration   Jonas Karlman
• [PATCH v2 21/30] mmc: rockchip_sdhci: Add initial support for RK3528   Jonas Karlman
• [PATCH v2 22/30] mmc: rockchip_sdhci: Gate clock for glitch free phase switching   Jonas Karlman
• [PATCH v2 23/30] rockchip: otp: Add support for RK3528   Jonas Karlman
• [PATCH v2 24/30] adc: rockchip-saradc: Add support for RK3528   Jonas Karlman
• [PATCH v2 25/30] rng: rockchip: Add support for rkrng variant   Jonas Karlman
• [PATCH v2 26/30] phy: rockchip-inno-usb2: Add support for clkout_ctl_phy   Jonas Karlman
• [PATCH v2 27/30] phy: rockchip-inno-usb2: Add support for RK3528   Jonas Karlman
• [PATCH v2 28/30] net: dwc_eth_qos_rockchip: Add support for RK3528   Jonas Karlman
• [PATCH v2 29/30] board: rockchip: Add minimal generic RK3528 board   Jonas Karlman
• [PATCH v2 30/30] board: rockchip: Add Radxa E20C   Jonas Karlman
• [PATCH 3/3] rockchip: avoid rebuilding most binaries for u-boot-rockchip-spi.bin   Jonas Karlman
• [PATCH v2 0/4] rockchip: Update rng compatible for RK356x and RK3588   Jonas Karlman
• [PATCH v2 1/4] rng: rockchip_rng: Add compatible for RK3568   Jonas Karlman
• [PATCH v2 2/4] rockchip: rk356x: Remove rng node from u-boot.dtsi   Jonas Karlman
• [PATCH v2 3/4] arm64: dts: rockchip: Add rng node to RK3588   Jonas Karlman
• [PATCH v2 4/4] rng: rockchip_rng: Update compatible for RK3588   Jonas Karlman
• [PATCH v4 01/10] rockchip: binman: Correct the OS prop for U-Boot   Jonas Karlman
• [PATCH v4 02/10] rockchip: binman: Factor out arch and compression   Jonas Karlman
• [PATCH v4 04/10] rockchip: binman: Create a template for the FIT   Jonas Karlman
• [PATCH v4 07/10] rockchip: binman: Include a compatible string in each configuration   Jonas Karlman
• [PATCH v4 08/10] rockchip: binman: Use the skip-at-start prop in simple-bin image   Jonas Karlman
• [PATCH v4 09/10] rockchip: binman: Support use of crc32 for SPL_FIT_SIGNATURE   Jonas Karlman
• [PATCH v4 02/10] rockchip: binman: Factor out arch and compression   Jonas Karlman
• [PATCH v4 09/10] rockchip: binman: Support use of crc32 for SPL_FIT_SIGNATURE   Jonas Karlman
• [PATCH] mmc: sdhci: Fix possible Synchronous Abort using PIO mode   Jonas Karlman
• [PATCH v5 0/7] rockchip: binman: Use a template for FIT and other improvements   Jonas Karlman
• [PATCH v5 1/7] rockchip: binman: Correct the OS prop for U-Boot   Jonas Karlman
• [PATCH v5 2/7] rockchip: binman: Factor out arch and compression   Jonas Karlman
• [PATCH v5 3/7] rockchip: binman: Create a template for the FIT   Jonas Karlman
• [PATCH v5 4/7] rockchip: binman: Un-indent the FIT template   Jonas Karlman
• [PATCH v5 5/7] rockchip: Add SPL_PAD_TO Kconfig default value   Jonas Karlman
• [PATCH v5 6/7] rockchip: binman: Include a compatible string in each configuration   Jonas Karlman
• [PATCH v5 7/7] rockchip: binman: Support use of crc32 hash for FIT images   Jonas Karlman
• [PATCH] board: rockchip: add Xunlong Orange Pi 5 Max   Jonas Karlman
• [PATCH 2/7] rockchip: Add DFU to SPL   Jonas Karlman
• [PATCH 3/7] rockchip: Add DFU to SPL for RK3588   Jonas Karlman
• [PATCH 4/7] rockchip: Add DFU to SPL for RK3568   Jonas Karlman
• [PATCH v3 08/12] dts: rockchip: rk356x: Prerelocate VOP in U-Boot proper   Jonas Karlman
• [PATCH v3 10/12] video: rockchip: Add HDMI support for RK3568   Jonas Karlman
• [PATCH v3 11/12] configs: pinetab2-rk3566: Enable video and USB keyboard   Jonas Karlman
• [PATCH v6 0/7] rockchip: binman: Use a template for FIT and other improvements   Jonas Karlman
• [PATCH v6 1/7] rockchip: binman: Correct the OS prop for U-Boot   Jonas Karlman
• [PATCH v6 2/7] rockchip: binman: Factor out arch and compression   Jonas Karlman
• [PATCH v6 3/7] rockchip: binman: Create a template for the FIT   Jonas Karlman
• [PATCH v6 4/7] rockchip: binman: Un-indent the FIT template   Jonas Karlman
• [PATCH v6 5/7] rockchip: Add SPL_PAD_TO Kconfig default value   Jonas Karlman
• [PATCH v6 6/7] rockchip: binman: Include a compatible string in each configuration   Jonas Karlman
• [PATCH v6 7/7] rockchip: binman: Support use of crc32 hash for FIT images   Jonas Karlman
• [PATCH v2] board: rockchip: add Xunlong Orange Pi 5 Max   Jonas Karlman
• [PATCH v2 03/16] arm: rockchip: add RK3576-specific syscon ids   Jonas Karlman
• [PATCH v2 05/16] pinctrl: rockchip: support rk3576 pinctrl   Jonas Karlman
• [PATCH v2 16/16] rockchip: rk3576: Add support for ROC-RK3576-PC board   Jonas Karlman
• [PATCH v2 04/16] arm: rockchip: Add RK3576 arch core support   Jonas Karlman
• [PATCH v3 11/12] configs: pinetab2-rk3566: Enable video and USB keyboard   Jonas Karlman
• [PATCH v2 01/16] rockchip: sdram: honor CFG_SYS_SDRAM_BASE when defining ram regions   Jonas Karlman
• [PATCH v2 02/16] rockchip: mkimage: Add rk3576 support   Jonas Karlman
• [PATCH v2 06/16] clk: rockchip: Add rk3576 clk support   Jonas Karlman
• [PATCH v2 07/16] reset: rockchip: implement rk3576 lookup table   Jonas Karlman
• [PATCH v2 08/16] ram: rockchip: Add rk3576 ddr driver support   Jonas Karlman
• [PATCH v2 09/16] rockchip: otp: Add support for RK3576   Jonas Karlman
• [PATCH v2 10/16] mmc: rockchip_sdhci: Add support for RK3576   Jonas Karlman
• [PATCH v2 11/16] mmc: rockchip_dw_mmc: Add support for rk3576   Jonas Karlman
• [PATCH v2 12/16] net: dwc_eth_qos_rockchip: Add support for RK3576   Jonas Karlman
• [PATCH] clk: Fix clk_set_parent() regression   Jonas Karlman
• Pull request: u-boot-rockchip-20250422   Jonas Karlman
• Pull request: u-boot-rockchip-20250422   Jonas Karlman
• [PATCH 0/4] rockchip: rk3576: Add rng, checkboard() and ArmSoM Sige5   Jonas Karlman
• [PATCH 1/4] rockchip: rk3576: Add rng node to u-boot.dtsi   Jonas Karlman
• [PATCH 2/4] rockchip: rk3576: Implement checkboard() to print SoC variant   Jonas Karlman
• [PATCH 3/4] board: rockchip: Add minimal generic RK3576 board   Jonas Karlman
• [PATCH 4/4] board: rockchip: Add ArmSoM Sige5   Jonas Karlman
• [PATCH] net: gem: ignore tx_clk if MII is used   Katakam, Harini
• [PATCH] net: gem: ignore tx_clk if MII is used   Katakam, Harini
• [PATCH v2] board: rockchip: add Xunlong Orange Pi 5 Max   Ilya Katsnelson
• [PATCH v3] board: rockchip: add Xunlong Orange Pi 5 Max   Ilya Katsnelson
• [PATCH v4] board: rockchip: add Xunlong Orange Pi 5 Max   Ilya Katsnelson
• [PATCH v2 0/4] Add support for RAM boot from maskrom mode   Mark Kettenis
• [PATCH 3/3] efi_loader: Move device-removal later in exit-boot-services   Mark Kettenis
• [PATCH 1/1] efi_loader: stop network in EXIT_BOOT_SERVICES   Mark Kettenis
• [PATCH v2 3/4] efi_loader: Move device-removal later in exit-boot-services   Mark Kettenis
• [PATCH 0/6] Apple RTKit improvements   Mark Kettenis
• [PATCH 1/6] arm: apple: rtkit: Add support for AP power & syslogs   Mark Kettenis
• [PATCH 2/6] arm: apple: rtkit: Add default buffer handlers   Mark Kettenis
• [PATCH 3/6] arm: apple: rtkit: Add a generic RTKit helper driver   Mark Kettenis
• [PATCH 4/6] arm: apple: rtkit: Add OSLog buffer support   Mark Kettenis
• [PATCH 5/6] arm: apple: rtkit: Add endpoint field to buffers   Mark Kettenis
• [PATCH 6/6] arm: apple: rtkit: Support allocating OSLog out of SRAM in helper   Mark Kettenis
• [PATCH 1/1] boot: BOOTMETH_DISTRO should select BOOTMETH_EFI_BOOTMGR   Mark Kettenis
• [PATCH v2 3/3] rockchip: rock64-rk3328_defconfig: enable HDMI output and USB keyboard   Vasily Khoruzhick
• [PATCH v2 2/3] video: rockchip: rk3328: filter unsupported modes   Vasily Khoruzhick
• [PATCH] crypto: fsl - Fix RNG generation for lengths greater than 16 bytes   Pawel Kochanowski
• [PATCH] crypto: fsl - Add cache flush after job descriptor swap   Pawel Kochanowski
• [PATCH] spi: fsl_qspi: Move AHB read buffer config after LUT   Pawel Kochanowski
• [EXT] [PATCH] crypto: fsl - Fix RNG generation for lengths greater than 16 bytes   Paweł Kochanowski
• [EXT] [PATCH] crypto: fsl - Fix RNG generation for lengths greater than 16 bytes   Paweł Kochanowski
• [EXT] [PATCH] crypto: fsl - Fix RNG generation for lengths greater than 16 bytes   Paweł Kochanowski
• [EXT] [PATCH] crypto: fsl - Fix RNG generation for lengths greater than 16 bytes   Paweł Kochanowski
• Re: U-Boot interferes with initrd binary — Revert "efi: Correct smbios-table installation" ?   Christian Kohlschütter
• Re: U-Boot interferes with initrd binary — Revert "efi: Correct smbios-table installation" ?   Christian Kohlschütter
• [PATCH 1/1] efi_loader: stop network in EXIT_BOOT_SERVICES   Christian Kohlschütter
• Re: U-Boot interferes with initrd binary — Revert "efi: Correct smbios-table installation" ?   Christian Kohlschütter
• [PATCH v2 1/3] usb: gadget: atmel: Add SAM9X60 support   Mattijs Korpershoek
• [PATCH v2 2/3] ARM: dts: sam9x60: Add USB gadget DT node.   Mattijs Korpershoek
• [PATCH v2 3/3] ARM: dts: at91: sam9x60-curiosity: Enable USB gadget node   Mattijs Korpershoek
• [PATCH v2 2/3] ARM: dts: sam9x60: Add USB gadget DT node.   Mattijs Korpershoek
• Rate of innovation in the project (Was: Re: Rate of change in the project)   Mattijs Korpershoek
• [PATCH] bootstd: android: avoid possible null pointer dereference   Mattijs Korpershoek
• [PATCH] tools/make_pip: Use virtualenv when invoking pip   Mattijs Korpershoek
• [PATCH] usb: dwc3: gadget: Fix excepts/expects typo   Mattijs Korpershoek
• [PATCH 1/3] fastboot: lift restrictions on !NET_LWIP for USB   Mattijs Korpershoek
• [PATCH 0/4] usb: gadget: f_mass_storage: Fix crashes on low memory devices   Mattijs Korpershoek
• (subset) [PATCH v2 1/3] usb: gadget: atmel: Add SAM9X60 support   Mattijs Korpershoek
• [PATCH] bootstd: android: avoid possible null pointer dereference   Mattijs Korpershoek
• [PATCH 5/7] binman: Workaround lz4 cli padding in test cases   Mattijs Korpershoek
• [PATCH 1/3] usb: gadget: f_acm: Claim requested USB endpoints   Mattijs Korpershoek
• [PATCH 2/3] usb: gadget: f_acm: Allow restarting ACM console after stopping it   Mattijs Korpershoek
• [PATCH 3/3] usb: gadget: introduce 'enabled' flag in struct usb_ep   Mattijs Korpershoek
• [GIT PULL] Please pull u-boot-dfu-20250410 into master   Mattijs Korpershoek
• [PATCH RFT v2 0/3] fastboot: add support for generic block flashing   Mattijs Korpershoek
• [PATCH 1/5] fwu: developerbox: fix dfu alt buffer clearing   Mattijs Korpershoek
• [PATCH 2/5] board: st: common: fix dfu alt buffer clearing   Mattijs Korpershoek
• [PATCH 2/5] board: st: common: fix dfu alt buffer clearing   Mattijs Korpershoek
• [PATCH] tools/make_pip: Use virtualenv when invoking pip   Mattijs Korpershoek
• [PATCH v2] tools/make_pip: Use venv when invoking pip   Mattijs Korpershoek
• [PATCH] tools/make_pip: Use virtualenv when invoking pip   Mattijs Korpershoek
• [PATCH v2] tools/make_pip: Use venv when invoking pip   Mattijs Korpershoek
• [PATCH v2] tools/make_pip: Use venv when invoking pip   Mattijs Korpershoek
• [PATCH RFT v2 0/3] fastboot: add support for generic block flashing   Mattijs Korpershoek
• [PATCH] cmd: Kconfig: Fix typos   Mattijs Korpershoek
• [PATCH RFT v2 1/3] fastboot: blk: introduce fastboot block flashing support   Mattijs Korpershoek
• Maintenance of Python tools   Mattijs Korpershoek
• [PATCH 0/3] usb: gadget: Fix issues when using f_acm with ci_udc   Mattijs Korpershoek
• (subset) [PATCH 0/5] fix dfu alt buffer clearing   Mattijs Korpershoek
• Maintenance of Python tools   Mattijs Korpershoek
• [GIT PULL] Please pull u-boot-dfu-20250424 into master   Mattijs Korpershoek
• [PATCH RFT v2 1/3] fastboot: blk: introduce fastboot block flashing support   Mattijs Korpershoek
• [PATCH 0/3] u-boot chain-loading LineageOS bootimg   Mattijs Korpershoek
• [PATCH] configs: phycore_am62x_a53_defconfig: Remove CONFIG_SYS_BOOTM_LEN   Mattijs Korpershoek
• [PATCH RFT v2 1/3] fastboot: blk: introduce fastboot block flashing support   Mattijs Korpershoek
• [PATCH 1/1] boot: let BOOTSTAGE_RECORD_COUNT default to 50   Mattijs Korpershoek
• [PATCH 0/3] u-boot chain-loading LineageOS bootimg   Mattijs Korpershoek
• [PATCH v2 1/1] bootm: improve error message when gzip decompression buffer is too small   Mattijs Korpershoek
• [PATCH v2 2/3] tegra: respect CONFIG_TEGRA_ENABLE_UART* options on Transformer T20   Artur Kowalski
• [PATCH v2 3/3] tegra: allow to expose UART on microSD slot   Artur Kowalski
• [PATCH v2 3/3] tegra: allow to expose UART on microSD slot   Artur Kowalski
• [PATCH v2 5/6] dt-bindings: clock: drop NUM_CLOCKS define for EN7581   Krzysztof Kozlowski
• [PATCH v2 5/6] dt-bindings: clock: drop NUM_CLOCKS define for EN7581   Krzysztof Kozlowski
• [PATCH RESEND] drivers: usb: gadget: composite: add checking for interface number   Arseniy Krasnov
• [PATCH] test/py: spi: Prevent to overwrite the reserved memory   Love Kumar
• [PATCH] mach-k3: common_fdt: Fix Label Issue   Kumar, Udit
• [PATCH] doc: board: ti: Add optee rng support   Udit Kumar
• [PATCH v2] mach-k3: common_fdt: Move carveout struct   Kumar, Udit
• [PATCH V2] firmware: ti_sci: Scan all device instances when releasing exclusive devices   Kumar, Udit
• [PATCH V2] firmware: ti_sci: Scan all device instances when releasing exclusive devices   Kumar, Udit
• [PATCH] arm: mach-k3: r5: j7200: Add clk dev data for WKUP UART   Udit Kumar
• [RFC PATCH 1/2 v2] tools: binman: control.py: Propagate bootph-* properties to supernodes   Kumar, Udit
• [PATCH V2 3/9] beagle: beagley-ai: env: Set up the boot devices and boot methods   Kumar, Udit
• [PATCH V2 5/9] beagle: beagley-ai: env: Enable DFU env options   Kumar, Udit
• [PATCH V2 9/9] doc: beagle: Add BeagleY-AI documentation   Kumar, Udit
• [PATCH v3 0/4] omap24xx_i2c: Enable Repeated Start functionality   Kumar, Udit
• [PATCH 1/4] arm: mach-k3: Add config option for booting HSM core   Kumar, Udit
• [PATCH 4/4] arm: mach-k3: r5: common: Add support to boot HSM M4 core   Kumar, Udit
• [PATCH 1/2] mtd: Kconfig: Add SPL_MUX_MMIO dependency to HBMC driver   Kumar, Udit
• [PATCH 2/2] arm: dts: k3-j721e-r5-common-proc-board: Enable HBMC in R5 SPL stage   Kumar, Udit
• [PATCH 4/4] arm: mach-k3: r5: common: Add support to boot HSM M4 core   Kumar, Udit
• [RFC] Expected behavior of the go command   Kumar, Udit
• [RFC] Expected behavior of the go command   Kumar, Udit
• [RFC] Expected behavior of the go command   Kumar, Udit
• [PATCH 1/9] board: beagle: beagley-ai: Add pattern match for MAINTAINERS   Kumar, Udit
• [PATCH 3/9] beagle: beagley-ai: env: Set up the boot devices and boot methods   Kumar, Udit
• [PATCH 5/9] beagle: beagley-ai: env: Enable DFU env options   Kumar, Udit
• [PATCH 1/2] include: env: ti: mmc.h: Find DTB files in dtb directory for AM57xx   Kumar, Udit
• [v3 PATCH 0/4] k3-j784s4*: Enable ESMs and related PMIC   Udit Kumar
• [v3 PATCH 1/4] arm: dts: k3-j784s4-r5-evm: Add the PMIC ESM node   Udit Kumar
• [v3 PATCH 2/4] arm: dts: k3-am69-r5-evm: Add the PMIC ESM node   Udit Kumar
• [v3 PATCH 3/4] board: ti: j784s4: Initialize the ESM & PMIC ESM   Udit Kumar
• [v3 PATCH 4/4] configs: j784s4_evm_r5: Enable ESM related configs   Udit Kumar
• [PATCH] firmware: ti_sci: Add Initialization of dev_info head node   Udit Kumar
• [PATCH v2] firmware: ti_sci: Add Initialization of dev_info head node   Udit Kumar
• [PATCH 0/7] watchdog: at91sam9_wdt driver enhancement   Zixun LI
• [PATCH 1/7] arm: at91: wdt: Remove unused at91_wdt struct   Zixun LI
• [PATCH v2 0/8] watchdog: at91sam9_wdt driver enhancement   Zixun LI
• [PATCH v2 1/8] arm: at91: remove at91_wdt struct in spl   Zixun LI
• [PATCH v2 2/8] arm: at91: wdt: Remove unused at91_wdt struct   Zixun LI
• [PATCH v2 3/8] arm: at91: wdt: Rename regval in priv data to mr   Zixun LI
• [PATCH v2 4/8] watchdog: at91sam9_wdt: Rename priv to wdt   Zixun LI
• [PATCH v2 5/8] arm: at91: wdt: Add SAM9X60 register definition   Zixun LI
• [PATCH v2 6/8] watchdog: at91sam9_wdt: Add SAM9X60 support   Zixun LI
• [PATCH v2 7/8] ARM: dts: sam9x60: Add watchdog DT node.   Zixun LI
• [PATCH v2 8/8] ARM: dts: at91: sam9x60-curiosity: Enable watchdog node   Zixun LI
• [PATCH v2 8/8] ARM: dts: at91: sam9x60-curiosity: Enable watchdog node   Zixun LI
• [PATCH v3 0/6] watchdog: at91sam9_wdt driver enhancement   Zixun LI
• [PATCH v3 1/6] arm: at91: wdt: Remove at91_wdt struct   Zixun LI
• [PATCH v3 2/6] arm: at91: wdt: Rename regval in priv data to mr   Zixun LI
• [PATCH v3 3/6] watchdog: at91sam9_wdt: Rename priv to wdt   Zixun LI
• [PATCH v3 4/6] watchdog: at91sam9_wdt: Add SAM9X60 support   Zixun LI
• [PATCH v3 5/6] ARM: dts: sam9x60: Add watchdog DT node   Zixun LI
• [PATCH v3 6/6] ARM: dts: at91: sam9x60-curiosity: Enable watchdog node   Zixun LI
• [PATCH v4 0/6] watchdog: at91sam9_wdt driver enhancement   Zixun LI
• [PATCH v4 1/6] arm: at91: wdt: Remove at91_wdt struct   Zixun LI
• [PATCH v4 2/6] arm: at91: wdt: Rename regval in priv data to mr   Zixun LI
• [PATCH v4 3/6] watchdog: at91sam9_wdt: Rename priv to wdt   Zixun LI
• [PATCH v4 4/6] watchdog: at91sam9_wdt: Add SAM9X60 support   Zixun LI
• [PATCH v4 5/6] ARM: dts: sam9x60: Add watchdog DT node   Zixun LI
• [PATCH v4 6/6] ARM: dts: at91: sam9x60-curiosity: Enable watchdog node   Zixun LI
• [PATCH 00/34] sunxi: clock refactoring and Allwinner A523 support   Yixun Lan
• [PATCH 00/34] sunxi: clock refactoring and Allwinner A523 support   Yixun Lan
• [PATCH 30/34] sunxi: A523: add DRAM initialisation routine   Yixun Lan
• [PATCH] sunxi: add "fake" FEL pin support   Yixun Lan
• [PATCH 33/34] sunxi: A523: add DT files from Linux v3 branch   Yixun Lan
• [PATCH v2 2/3] sunxi: add "fake" FEL pin support   Yixun Lan
• [PATCH v2 2/3] sunxi: add "fake" FEL pin support   Yixun Lan
• [PATCH v2 0/3] sunxi: add "fake" FEL button feature   Yixun Lan
• [PATCH v2 2/3] sunxi: add "fake" FEL pin support   Yixun Lan
• SpacemiT K1x / Ky X1 DRAM init   Yixun Lan
• [PATCH 0/1] Fix RPI5 uart clock when loading kernel with non-boot DT   Bruno Leite
• [PATCH 1/1] rpi: copy over uart clock-frequency in DT   Bruno Leite
• [PATCH 1/2] riscv: dts: k1: add pinctrl property in dts.   Leo Liang
• [PATCH 2/2] config: Enable pinctrl in bananapi-f3   Leo Liang
• [PATCH 1/1] riscv: dts: jh7110: add bootph-pre-ram for &pllclk   Leo Liang
• [PATCH 1/1] configs: qemu-riscv raise CONFIG_NR_DRAM_BANKS   Leo Liang
• [PATCH v2] MAINTAINERS: visionfive2: Add match N: starfive pattern   Leo Liang
• [PATCH v2 1/4] riscv: lib: Add a default implementation of board_fdt_blob_setup   Leo Liang
• [PATCH v1] board: starfive: visionfive2: Order board detection logic to match config   Leo Liang
• [PATCH] doc: board: starfive: visionfive2: add missing format command to Flashing   Leo Liang
• [GIT PULL] u-boot-riscv/master   Leo Liang
• Issues with AMD Genoa/Bergamo PCIe Bridge   Jonas Licht
• [PATCH v3 0/4] omap24xx_i2c: Enable Repeated Start functionality   Aniket Limaye
• [PATCH v3 1/4] i2c: omap24xx_i2c: Remove unused CONFIG_I2C_REPEATED_START   Aniket Limaye
• [PATCH v3 2/4] i2c: omap24xx_i2c: Use new function __omap24_i2c_xfer_msg()   Aniket Limaye
• [PATCH v3 3/4] i2c: omap24xx_i2c: support CONFIG for repeated start in DM_I2C xfer   Aniket Limaye
• [PATCH v3 4/4] drivers: i2c: Kconfig: Add CONFIG_SYS_I2C_OMAP24XX_REPEATED_START   Aniket Limaye
• [PATCH v2 2/4] i2c: omap24xx_i2c: Use new function __omap24_i2c_xfer_msg()   Aniket Limaye
• [PATCH] usb: dwc2: Refactor register operations with clrsetbits macros   Junhui Liu
• [PATCH v2 1/3] efi: add EFI_SYSTEM_TABLE_POINTER for debug   Paul Liu
• [PATCH v2 2/3] efi: add EFI_DEBUG_IMAGE_INFO_TABLE for debug   Paul Liu
• [PATCH v2 3/3] efi: add EFI_DEBUG_IMAGE_INFO for debug   Paul Liu
• [PATCH v2 2/3] efi: add EFI_DEBUG_IMAGE_INFO_TABLE for debug   Paul Liu
• [PATCH 3/3] efi: add EFI_DEBUG_IMAGE_INFO for debug   Paul Liu
• [PATCH] mtd: spi-nor: Use CONFIG_IS_ENABLED for CONFIG_SPI_FLASH_BAR defines   Mike Looijmans
• [PATCH] mtdpart: Support MTDPART_SIZ_FULL in fixed-partitions   Mike Looijmans
• [PATCH] mtdpart: Support MTDPART_SIZ_FULL in fixed-partitions   Mike Looijmans
• [PATCH v2] mtd: mtdpart: Support MTDPART_SIZ_FULL in fixed-partitions   Mike Looijmans
• [PATCH] gpio: zynq: Read using DATA register when direction is output   Mike Looijmans
• [PATCH] mtd: spi-nor: Use CONFIG_IS_ENABLED for CONFIG_SPI_FLASH_BAR defines   Mike Looijmans
• [PATCH v2] mtd: mtdpart: Support MTDPART_SIZ_FULL in fixed-partitions   Mike Looijmans
• [PATCH 1/1] net: phy: Add the Airoha EN8811H PHY driver   Lucien.Jheng
• [U-Boot, v1, 1/1] net: phy: air_en8811h: load the PHY firmware from filesystem on block device instead   Lucien.Jheng
• [U-Boot, v1, 1/1] net: phy: air_en8811h: load the PHY firmware from filesystem on block device instead   Lucien.Jheng
• [PATCH 1/1] net: phy: Add the Airoha EN8811H PHY driver   Lucien.Jheng
• [U-Boot, v1, 1/1] net: phy: air_en8811h: Configure the en8811h fw size as a fixed setting   Lucien.Jheng
• [PATCH] mkimage: fix option parsing segfault   Carlos López
• [PATCH] board: ti: am33xx: Add support for BeagleBoard Green Eco   Kory Maincent
• [resend v3 00/12] Add Synopsys MIPI I3C Driver support   Maniyam, Dinesh
• [resend v3 00/12] Add Synopsys MIPI I3C Driver support   Maniyam, Dinesh
• [resend v3 00/12] Add Synopsys MIPI I3C Driver support   Maniyam, Dinesh
• [resend v4 09/12] cmd: Add i3c command support.   Maniyam, Dinesh
• [resend v4 03/12] drivers: i3c: Add i3c uclass driver.   Maniyam, Dinesh
• [resend v4 00/12] Add Synopsys MIPI I3C Driver support   Maniyam, Dinesh
• [PATCH] mtd: spi-nor-core: Fixup SNOR_F_IO_MODE_EN_VOLATILE for MT35X   Prasanth Mantena
• [PATCH v2 1/2] bloblist: fix the overriding of fdt from bloblist   Raymond Mao
• [PATCH v2 2/2] env: point fdt address to the fdt in a bloblist   Raymond Mao
• [PATCH 1/2] efi_loader: Move public cert for capsules to .rodata   Raymond Mao
• [PATCH 0/4] bloblist: fdt: Clean up the code   Raymond Mao
• [PATCH 2/4] fdt: Introduce OF_BLOBLIST   Raymond Mao
• [PATCH 0/4] bloblist: fdt: Clean up the code   Raymond Mao
• [PATCH 0/4] bloblist: fdt: Clean up the code   Raymond Mao
• [PATCH] mbedtls: remove incorrect attribute type checker   Raymond Mao
• [PATCH 0/4] bloblist: fdt: Clean up the code   Raymond Mao
• [PATCH 0/4] bloblist: fdt: Clean up the code   Raymond Mao
• [PATCH 0/4] bloblist: fdt: Clean up the code   Raymond Mao
• [PATCH 0/4] bloblist: fdt: Clean up the code   Raymond Mao
• Community meeting April 8th 2025 (was: Re: [ANN] U-Boot v2025.04 released)   Raymond Mao
• [PATCH 0/4] bloblist: fdt: Clean up the code   Raymond Mao
• [PATCH 0/4] bloblist: fdt: Clean up the code   Raymond Mao
• [PATCH 0/4] bloblist: fdt: Clean up the code   Raymond Mao
• [PATCH 0/4] bloblist: fdt: Clean up the code   Raymond Mao
• [PATCH v3 00/22] passage: Define a standard for firmware data flow   Raymond Mao
• [PATCH v2 1/2] bloblist: fix the overriding of fdt from bloblist   Raymond Mao
• [PATCH v3 00/22] passage: Define a standard for firmware data flow   Raymond Mao
• [PATCH v2 0/6] airoha: Add initial support AN7581   Christian Marangi
• [PATCH 00/14] airoha: add support spi/mmc/ethernet   Christian Marangi
• [PATCH 01/14] arch: arm: dts: an7581: add Chip SCU node   Christian Marangi
• [PATCH 02/14] net: airoha: Add Airoha Ethernet driver   Christian Marangi
• [PATCH 03/14] airoha: Add Ethernet config to defconfig   Christian Marangi
• [PATCH 04/14] arch: arm: dts: an7581: Add Ethernet nodes   Christian Marangi
• [PATCH 05/14] mmc: mediatek: permit to also build for Airoha arch   Christian Marangi
• [PATCH 06/14] arch: arm: dts: an7581: Add eMMC nodes   Christian Marangi
• [PATCH 07/14] airoha: Add eMMC config to defconfig   Christian Marangi
• [PATCH 08/14] regmap: Add regmap_set/clear_bits shorthands   Christian Marangi
• [PATCH 09/14] spi: drop unneeded spi.h header include from spinand.h   Christian Marangi
• [PATCH 10/14] spi: Introduce setup_for_spinand()   Christian Marangi
• [PATCH 11/14] spinand: call SPI setup_for_spinand if supported   Christian Marangi
• [PATCH 12/14] spi: airoha: Add Airoha SPI NAND driver   Christian Marangi
• [PATCH 13/14] arm: dts: an7581: Add SNAND node   Christian Marangi
• [PATCH 14/14] configs: airoha: an7581_evb: Enable Airoha SNFI SPI config   Christian Marangi
• [PATCH] env: Introduce support for SPI NAND flash   Christian Marangi
• [PATCH] env: Introduce support for SPI NAND flash   Christian Marangi
• [PATCH 02/14] net: airoha: Add Airoha Ethernet driver   Christian Marangi
• [PATCH 02/14] net: airoha: Add Airoha Ethernet driver   Christian Marangi
• [PATCH] env: Introduce support for MTD   Christian Marangi
• [RESEND PATCH] clk: fix crash on clk_set_rate clean rate cache   Christian Marangi
• [PATCH v2 00/14] airoha: add support spi/mmc/ethernet   Christian Marangi
• [PATCH v2 01/14] arch: arm: dts: an7581: add Chip SCU node   Christian Marangi
• [PATCH v2 02/14] net: airoha: Add Airoha Ethernet driver   Christian Marangi
• [PATCH v2 03/14] airoha: Add Ethernet config to defconfig   Christian Marangi
• [PATCH v2 04/14] arch: arm: dts: an7581: Add Ethernet nodes   Christian Marangi
• [PATCH v2 05/14] mmc: mediatek: permit to also build for Airoha arch   Christian Marangi
• [PATCH v2 06/14] arch: arm: dts: an7581: Add eMMC nodes   Christian Marangi
• [PATCH v2 07/14] airoha: Add eMMC config to defconfig   Christian Marangi
• [PATCH v2 08/14] regmap: Add regmap_set/clear_bits shorthands   Christian Marangi
• [PATCH v2 09/14] spi: drop unneeded spi.h header include from spinand.h   Christian Marangi
• [PATCH v2 10/14] spi: Introduce setup_for_spinand()   Christian Marangi
• [PATCH v2 11/14] spinand: call SPI setup_for_spinand if supported   Christian Marangi
• [PATCH v2 12/14] spi: airoha: Add Airoha SPI NAND driver   Christian Marangi
• [PATCH v2 13/14] arm: dts: an7581: Add SNAND node   Christian Marangi
• [PATCH v2 14/14] configs: airoha: an7581_evb: Enable Airoha SNFI SPI config   Christian Marangi
• SpacemiT K1x / Ky X1 DRAM init   Daniel Maslowski
• [PATCH 0/5] More MMC fixes   Judith Mendez
• [PATCH 1/5] mmc: am654_sdhci: Add MMC_HS_52 to timing data   Judith Mendez
• [PATCH 2/5] mmc: am654_sdhci: Fix HIGH_SPEED_ENA   Judith Mendez
• [PATCH 3/5] mmc: am654_sdhci: Add am654_sdhci_set_control_reg   Judith Mendez
• [PATCH 4/5] configs: am62px_evm_r5/a53_defconfig: Disable eMMC HS400   Judith Mendez
• [PATCH 5/5] configs: am62*_evm_a53_defconfig: Add TI_COMMON_CMD_OPTIONS   Judith Mendez
• [PATCH 0/5] More MMC fixes   Judith Mendez
• [PATCH v2 0/5] More MMC fixes   Judith Mendez
• [PATCH v2 1/5] mmc: am654_sdhci: Add MMC_HS_52 to timing data   Judith Mendez
• [PATCH v2 2/5] mmc: am654_sdhci: Fix HIGH_SPEED_ENA   Judith Mendez
• [PATCH v2 3/5] mmc: am654_sdhci: Add am654_sdhci_set_control_reg   Judith Mendez
• [PATCH v2 4/5] configs: am62px_evm_r5/a53_defconfig: Disable eMMC HS400   Judith Mendez
• [PATCH v2 5/5] configs: am62*_evm_a53_defconfig: Add TI_COMMON_CMD_OPTIONS   Judith Mendez
• [PATCH v2 0/5] More MMC fixes   Judith Mendez
• [PATCH v3 0/4] More MMC fixes   Judith Mendez
• [PATCH v3 1/4] mmc: am654_sdhci: Add MMC_HS_52 to timing data   Judith Mendez
• [PATCH v3 2/4] mmc: am654_sdhci: Fix HIGH_SPEED_ENA   Judith Mendez
• [PATCH v3 3/4] mmc: am654_sdhci: Add am654_sdhci_set_control_reg   Judith Mendez
• [PATCH v3 4/4] configs: am62*_evm_a53_defconfig: Add TI_COMMON_CMD_OPTIONS   Judith Mendez
• [PATCH] configs: am64x_evm_a53: Enable MMC UHS modes   Judith Mendez
• [PATCH] firmware: ti_sci: Scan all device instances when releasing exclusive devices   Nishanth Menon
• [PATCH] firmware: ti_sci: Scan all device instances when releasing exclusive devices   Nishanth Menon
• [PATCH V2] firmware: ti_sci: Scan all device instances when releasing exclusive devices   Nishanth Menon
• [PATCH] doc: board: ti: Add optee rng support   Nishanth Menon
• [PATCH V2] firmware: ti_sci: Scan all device instances when releasing exclusive devices   Nishanth Menon
• [PATCH] doc: board: ti: Add optee rng support   Nishanth Menon
• [PATCH 0/9] board: beagle: beagley-ai: Cleanups and   Nishanth Menon
• [PATCH 1/9] board: beagle: beagley-ai: Add pattern match for MAINTAINERS   Nishanth Menon
• [PATCH 2/9] arch: arm: dts: k3-am67a-beagley-ai-u-boot: Mark main_gpio1 as bootph-all   Nishanth Menon
• [PATCH 3/9] beagle: beagley-ai: env: Set up the boot devices and boot methods   Nishanth Menon
• [PATCH 4/9] beagle: beagley-ai: env: Setup scripts for LED control   Nishanth Menon
• [PATCH 5/9] beagle: beagley-ai: env: Enable DFU env options   Nishanth Menon
• [PATCH 6/9] configs: am67a_beagley_ai*: Use saveddefconfig   Nishanth Menon
• [PATCH 7/9] configs:am67a_beagley_ai*: Drop un-necessary config options   Nishanth Menon
• [PATCH 8/9] configs: am67a_beagley_ai_a53: Enable additional features   Nishanth Menon
• [PATCH 9/9] doc: beagle: Add BeagleY-AI documentation   Nishanth Menon
• [PATCH 2/9] arch: arm: dts: k3-am67a-beagley-ai-u-boot: Mark main_gpio1 as bootph-all   Nishanth Menon
• [PATCH v6 05/12] power-domain: Add refcounting   Nishanth Menon
• [PATCH v1 0/4] k3: migrate SPL_TEXT_BASE to new address   Nishanth Menon
• [PATCH v1 0/4] k3: migrate SPL_TEXT_BASE to new address   Nishanth Menon
• [PATCH v1 0/4] k3: migrate SPL_TEXT_BASE to new address   Nishanth Menon
• [PATCH v1 0/4] k3: migrate SPL_TEXT_BASE to new address   Nishanth Menon
• [PATCH 8/9] configs: am67a_beagley_ai_a53: Enable additional features   Nishanth Menon
• [PATCH 0/9] board: beagle: beagley-ai: Cleanups and   Nishanth Menon
• [PATCH V2 0/9] board: beagle: beagley-ai: Cleanups and stdboot   Nishanth Menon
• [PATCH V2 1/9] board: beagle: beagley-ai: Add pattern match for MAINTAINERS   Nishanth Menon
• [PATCH V2 2/9] arch: arm: dts: k3-am67a-beagley-ai-u-boot: Mark main_gpio1 as bootph-all   Nishanth Menon
• [PATCH V2 3/9] beagle: beagley-ai: env: Set up the boot devices and boot methods   Nishanth Menon
• [PATCH V2 4/9] beagle: beagley-ai: env: Setup scripts for LED control   Nishanth Menon
• [PATCH V2 5/9] beagle: beagley-ai: env: Enable DFU env options   Nishanth Menon
• [PATCH V2 6/9] configs: am67a_beagley_ai*: Use saveddefconfig   Nishanth Menon
• [PATCH V2 7/9] configs:am67a_beagley_ai*: Drop un-necessary config options   Nishanth Menon
• [PATCH V2 8/9] configs: am67a_beagley_ai_a53: Enable additional features   Nishanth Menon
• [PATCH V2 9/9] doc: beagle: Add BeagleY-AI documentation   Nishanth Menon
• [PATCH V2 3/9] beagle: beagley-ai: env: Set up the boot devices and boot methods   Nishanth Menon
• [PATCH V2 5/9] beagle: beagley-ai: env: Enable DFU env options   Nishanth Menon
• [PATCH 0/9] board: beagle: beagley-ai: Cleanups and stdboot   Nishanth Menon
• [PATCH 1/9] board: beagle: beagley-ai: Add pattern match for MAINTAINERS   Nishanth Menon
• [PATCH 2/9] arch: arm: dts: k3-am67a-beagley-ai-u-boot: Mark main_gpio1 as bootph-all   Nishanth Menon
• [PATCH 3/9] beagle: beagley-ai: env: Set up the boot devices and boot methods   Nishanth Menon
• [PATCH 4/9] beagle: beagley-ai: env: Setup scripts for LED control   Nishanth Menon
• [PATCH 5/9] beagle: beagley-ai: env: Enable DFU env options   Nishanth Menon
• [PATCH 6/9] configs: am67a_beagley_ai*: Use saveddefconfig   Nishanth Menon
• [PATCH 7/9] configs:am67a_beagley_ai*: Drop un-necessary config options   Nishanth Menon
• [PATCH 8/9] configs: am67a_beagley_ai_a53: Enable additional features   Nishanth Menon
• [PATCH 9/9] doc: beagle: Add BeagleY-AI documentation   Nishanth Menon
• [PATCH] firmware: ti_sci: Add Initialization of dev_info head node   Nishanth Menon
• [PATCH 2/4] fastboot: blk: add block device flashing configuration   Dmitrii Merkurev
• [PATCH RFT v2 1/3] fastboot: blk: introduce fastboot block flashing support   Dmitrii Merkurev
• [PATCH v3 0/4] Add support for BR Xilinx Zynq boards in mainline U-Boot.   Bernhard Messerklinger
• [PATCH v3 1/4] board/BuR/common: use strlcpy instead of strncpy   Bernhard Messerklinger
• [PATCH v3 2/4] board/BuR/common: add parameter for reset controller I2C bus selection   Bernhard Messerklinger
• [PATCH v3 3/4] board/BuR/common: split br_resetc_bmode function   Bernhard Messerklinger
• [PATCH v3 4/4] board/BuR/zynq: initial commit   Bernhard Messerklinger
• [PATCH v3 4/4] board/BuR/zynq: initial commit   Bernhard Messerklinger
• [PATCH v4 0/4] Add support for BR Xilinx Zynq boards in mainline U-Boot.   Bernhard Messerklinger
• [PATCH v4 1/4] board/BuR/common: use strlcpy instead of strncpy   Bernhard Messerklinger
• [PATCH v4 2/4] board/BuR/common: add parameter for reset controller I2C bus selection   Bernhard Messerklinger
• [PATCH v4 3/4] board/BuR/common: split br_resetc_bmode function   Bernhard Messerklinger
• [PATCH v4 4/4] board/BuR/zynq: initial commit   Bernhard Messerklinger
• [PATCH] mtd: spi-nor: Use CONFIG_IS_ENABLED for CONFIG_SPI_FLASH_BAR defines   Bernhard Messerklinger
• [PATCH] mtd: spi-nor: Use CONFIG_IS_ENABLED for CONFIG_SPI_FLASH_BAR defines   Bernhard Messerklinger
• [PATCH RFC/RFT 1/2] gpio: qcom: add new driver for SPMI gpios   Alexey Minnekhanov
• [PATCH] pinctrl: qcom: handle reserved ranges   Alexey Minnekhanov
• [PATCH] button: qcom-pmic: allow to specify code in devicetree   Alexey Minnekhanov
• [PATCH] rockchip: io-domain: Enable by default for all supported SoCs   Anand Moon
• [PATCH] rockchip: io-domain: Enable by default for all supported SoCs   Anand Moon
• [RFC] Upstreaming Orange Pi RV2 vendor patches - Seeking guidance   Sungjoon Moon
• [u-boot-test-hooks][PATCH] Add support for FVP emulator and fiptool   Harrison Mutai
• [PATCH] Docker, CI: Add vexpress_fvp / vexpress_fvp_bloblist support   Harrison Mutai
• [PATCH v1] efi_loader: Handle GD_FLG_SKIP_RELOC   Varadarajan Narayanan
• [PATCH v1 0/3] Enable env in UFS   Varadarajan Narayanan
• [PATCH v1 1/3] scsi: Implement get_blk() function   Varadarajan Narayanan
• [PATCH v1 2/3] env: Add support for storing env variables in UFS   Varadarajan Narayanan
• [PATCH v1 3/3] configs: qcs9100: Enable env in UFS   Varadarajan Narayanan
• [PATCH v1 2/2] drivers: scsi: Add 'erase' support   Varadarajan Narayanan
• [PATCH v1] efi_loader: Handle GD_FLG_SKIP_RELOC   Varadarajan Narayanan
• [PATCH v2 1/2] dm: blk: Add 'erase' generic block device commands   Varadarajan Narayanan
• [PATCH v2 2/2] drivers: scsi: Add 'erase' support   Varadarajan Narayanan
• [PATCH v1 1/3] scsi: Implement get_blk() function   Varadarajan Narayanan
• [PATCH v1 0/3] Implement reset to EDL for qcs9100   Varadarajan Narayanan
• [PATCH v1 1/3] mach-snapdragon: Do not define reset_cpu() if SYSRESET is enabled   Varadarajan Narayanan
• [PATCH v1 2/3] sysreset: Implement PSCI based reset to EDL mode for QCOM SoCs   Varadarajan Narayanan
• [PATCH v1 3/3] configs: qcs9100_defconfig: Enable SYSRESET   Varadarajan Narayanan
• [PATCH v1 2/3] sysreset: Implement PSCI based reset to EDL mode for QCOM SoCs   Varadarajan Narayanan
• [PATCH v2 0/2] Implement reset to EDL for qcs9100   Varadarajan Narayanan
• [PATCH v2 1/2] sysreset: Implement PSCI based reset to EDL mode for QCOM SoCs   Varadarajan Narayanan
• [PATCH v2 2/2] configs: qcs9100_defconfig: Enable SYSRESET   Varadarajan Narayanan
• [PATCH v1 2/3] sysreset: Implement PSCI based reset to EDL mode for QCOM SoCs   Varadarajan Narayanan
• Build for RISC-V with LLVM   Nathaniel
• [CAD QSPI v1] spi: cadence-qspi: Add disable STIG mode quikrs.   Ng, Boon Khai
• [CAD QSPI v1] spi: cadence-qspi: Add disable STIG mode quikrs.   Ng, Boon Khai
• [CAD QSPI v2] spi: cadence-qspi: Add disable STIG mode quikrs.   Boon Khai Ng
• [CAD QSPI v2] spi: cadence-qspi: Add disable STIG mode quikrs.   Ng, Boon Khai
• bootcount support for AM62 RTCSS   Thom Nichols
• bootcount support for AM62 RTCSS   Thom Nichols
• [PATCH] tiny-printf: Add support for upper case hex values   Christoph Niedermaier
• [PATCH] tiny-printf: Add support for upper case hex values   Christoph Niedermaier
• [PATCH] tiny-printf: Add support for upper case hex values   Christoph Niedermaier
• [PATCH] tiny-printf: Handle formatting of %p with an extra Kconfig   Christoph Niedermaier
• [PATCH] tiny-printf: Handle formatting of %p with an extra Kconfig   Christoph Niedermaier
• [PATCH] tiny-printf: Handle formatting of %p with an extra Kconfig   Christoph Niedermaier
• [REGRESSION] Re: [PATCH v2 16/24] clk: imx: Convert clock-osc-* back to osc_*   Christoph Niedermaier
• [PATCH] tiny-printf: Handle formatting of %p with an extra Kconfig   Christoph Niedermaier
• [PATCH V2] tiny-printf: Handle formatting of %p with an extra Kconfig   Christoph Niedermaier
• [PATCH V2] tiny-printf: Handle formatting of %p with an extra Kconfig   Christoph Niedermaier
• [PATCH V2] tiny-printf: Handle formatting of %p with an extra Kconfig   Christoph Niedermaier
• [PATCH V3] tiny-printf: Handle formatting of %p with an extra Kconfig   Christoph Niedermaier
• [PATCH 1/5] board: qualcomm: dragonboard820c: udpate readme   Christopher Obbard
• Issue with booting FIT image using Yocto with raspberry pi cm4   Christopher Obbard
• [PATCH] net: fsl_enetc: fix imdio register calculation   Vladimir Oltean
• [PATCH 0/2] mmc: omap_hsmmc: Restore the init_stream sequence   Mathieu Othacehe
• [PATCH 1/2] mmc: Add a new callback function to perform the 74 clocks cycle sequence   Mathieu Othacehe
• [PATCH 2/2] mmc: omap_hsmmc: implement send_init_stream callback   Mathieu Othacehe
• [PATCH v2 2/3] efi_loader: binary_run: register an initrd   Weizhao Ouyang
• [PATCH] efi_loader: bootbin: do not load an initrd if none is provided   Weizhao Ouyang
• [PATCH 0/4] Add support to boot TI K3 HSM M4 core   Beleswar Padhi
• [PATCH 1/4] arm: mach-k3: Add config option for booting HSM core   Beleswar Padhi
• [PATCH 2/4] arm: dts: k3-binman: Add template for packing HSM firmware   Beleswar Padhi
• [PATCH 3/4] arm: dts: k3-{j721s2/j784s4}-binman: Pack HSM firmware inside tispl.bin   Beleswar Padhi
• [PATCH 4/4] arm: mach-k3: r5: common: Add support to boot HSM M4 core   Beleswar Padhi
• [PATCH 2/4] arm: dts: k3-binman: Add template for packing HSM firmware   Beleswar Prasad Padhi
• [PATCH 3/4] arm: dts: k3-{j721s2/j784s4}-binman: Pack HSM firmware inside tispl.bin   Beleswar Prasad Padhi
• [PATCH 1/4] arm: mach-k3: Add config option for booting HSM core   Beleswar Prasad Padhi
• [PATCH 4/4] arm: mach-k3: r5: common: Add support to boot HSM M4 core   Beleswar Prasad Padhi
• [PATCH 4/4] arm: mach-k3: r5: common: Add support to boot HSM M4 core   Beleswar Prasad Padhi
• [PATCH 2/4] arm: dts: k3-binman: Add template for packing HSM firmware   Beleswar Prasad Padhi
• [PATCH v1] arm: mach-k3: am62px: Fix MCU_CLKOUT0 parent clock mux   Parth Pancholi
• [PATCH 0/3] Add fdt-fixups for AM62A variants   Aparna Patra
• [PATCH 1/3] arm: mach-k3: am62a: Fixup CPU core, DSS, CAN-FD and Video-codec nodes in fdt   Aparna Patra
• [PATCH 2/3] arm: mach-k3: am62a: Fixup thermal zone critical points   Aparna Patra
• [PATCH 3/3] arm: mach-k3: am62a: Fixup a53 max cpu frequency by speed-grade   Aparna Patra
• Question regarding arch-fs-layerscape in the context of DDR   Patryk
• [PATCH 00/34] sunxi: clock refactoring and Allwinner A523 support   Andre Przywara
• [PATCH 30/34] sunxi: A523: add DRAM initialisation routine   Andre Przywara
• [PATCH] sunxi: Use existing serial number for MAC address generation   Andre Przywara
• [PATCH 05/18] net/net: fix switch/case fallthrough annotations   Andre Przywara
• [PATCH] sunxi: add "fake" FEL pin support   Andre Przywara
• [PATCH v2 0/8] sunxi: Control USB pins and supplies via DT regulators   Andre Przywara
• [PATCH v2 1/8] power: regulator: Add a driver for the AXP PMIC drivevbus   Andre Przywara
• [PATCH v2 2/8] sunxi: Enable PMIC drivevbus regulator support for USB supplies   Andre Przywara
• [PATCH v2 3/8] phy: sun4i-usb: Control supplies via the regulator uclass   Andre Przywara
• [PATCH v2 4/8] sunxi: Remove obsolete USBx_VBUS_PIN Kconfig symbols   Andre Przywara
• [PATCH v2 5/8] gpio: axp: Remove virtual VBUS enable GPIO   Andre Przywara
• [PATCH v2 6/8] phy: sun4i-usb: Determine VBUS detection pin from devicetree   Andre Przywara
• [PATCH v2 7/8] phy: sun4i-usb: Determine USB OTG detection pin from devicetree   Andre Przywara
• [PATCH v2 8/8] sunxi: Kconfig: Remove obsolete USBx_* pin symbols   Andre Przywara
• [PATCH] sunxi: add "fake" FEL pin support   Andre Przywara
• [PATCH 05/18] net/net: fix switch/case fallthrough annotations   Andre Przywara
• [PATCH v2 1/8] power: regulator: Add a driver for the AXP PMIC drivevbus   Andre Przywara
• [PATCH 2/5] sunxi: H6: Remove useless DRAM timings parameter   Andre Przywara
• [PATCH 3/5] sunxi: H6: DRAM: Constify function parameters   Andre Przywara
• [PATCH 5/5] sunxi: h6/h616: Reuse common DRAM infrastructure   Andre Przywara
• [PATCH v2 0/3] sunxi: add "fake" FEL button feature   Andre Przywara
• [PATCH v2 1/3] sunxi: fix return_to_fel() prototype   Andre Przywara
• [PATCH v2 2/3] sunxi: add "fake" FEL pin support   Andre Przywara
• [PATCH v2 3/3] sunxi: x96_mate: Add "fake" FEL key definition   Andre Przywara
• [PATCH 5/5] sunxi: h6/h616: Reuse common DRAM infrastructure   Andre Przywara
• [PATCH v2 2/3] sunxi: add "fake" FEL pin support   Andre Przywara
• [PATCH v2 2/3] sunxi: add "fake" FEL pin support   Andre Przywara
• [PATCH v2 2/3] sunxi: add "fake" FEL pin support   Andre Przywara
• [PATCH] sunxi: enable MMU_PGPROT proper page table protection   Andre Przywara
• [PATCH 4/5] sunxi: h6: dram: split dram_para struct   Andre Przywara
• [PATCH 5/5] sunxi: h6/h616: Reuse common DRAM infrastructure   Andre Przywara
• Pull request: u-boot-sunxi/master for v2025.07   Andre Przywara
• [PATCH v1 0/1] Support for PRUETH mode on AM335x ICE   Parvathi Pudi
• [PATCH v1 1/1] include: configs: Adds support for AM335x ICE PRUSS mode   Parvathi Pudi
• [PATCH v1] arm: add call to cleanup_before_linux for go command   Raghavendra, Vignesh
• [PATCH] MAINTAINERS: board: qcom: db820c: update contact details   Jorge Ramirez
• [PATCH 3/7] mmc: msm_sdhci: handle bulk clock initialization error   Jorge Ramirez
• [PATCH 6/7] mach-snapdragon: board interface to enforce fdt   Jorge Ramirez
• [PATCH 6/7] mach-snapdragon: board interface to enforce fdt   Jorge Ramirez
• [PATCH 3/7] mmc: msm_sdhci: handle bulk clock initialization error   Jorge Ramirez
• [PATCH 3/5] clk/qcom: apq8096: fix the sdhci clock   Jorge Ramirez
• [PATCH 4/5] clk: stub: add qcom,glink-smd-rpm   Jorge Ramirez
• [PATCH 1/5] board: qualcomm: dragonboard820c: udpate readme   Jorge Ramirez
• [PATCH 3/5] clk/qcom: apq8096: fix the sdhci clock   Jorge Ramirez
• [PATCH] MAINTAINERS: board: qcom: db820c: update contact details   Jorge Ramirez-Ortiz
• Dragonboard 820c - fix board support   Jorge Ramirez-Ortiz
• [PATCH 1/7] board: qualcomm: dragonboard820c: udpate readme   Jorge Ramirez-Ortiz
• [PATCH 2/7] clk/qcom: apq8096: fix set rate for the uart clock   Jorge Ramirez-Ortiz
• [PATCH 3/7] mmc: msm_sdhci: handle bulk clock initialization error   Jorge Ramirez-Ortiz
• [PATCH 4/7] clk/qcom: apq8096: fix the sdhci clock   Jorge Ramirez-Ortiz
• [PATCH 5/7] configs: dragonboard820: enable GPIO   Jorge Ramirez-Ortiz
• [PATCH 6/7] mach-snapdragon: board interface to enforce fdt   Jorge Ramirez-Ortiz
• [PATCH 7/7] board: qualcommm: dragonboard820c: external fdt   Jorge Ramirez-Ortiz
• [PATCH 1/5] board: qualcomm: dragonboard820c: udpate readme   Jorge Ramirez-Ortiz
• [PATCH 2/5] clk/qcom: apq8096: fix set rate for the uart clock   Jorge Ramirez-Ortiz
• [PATCH 3/5] clk/qcom: apq8096: fix the sdhci clock   Jorge Ramirez-Ortiz
• [PATCH 4/5] clk: stub: add qcom,glink-smd-rpm   Jorge Ramirez-Ortiz
• [PATCH 5/5] configs: dragonboard820: updates   Jorge Ramirez-Ortiz
• [PATCH 1/5] board: qualcomm: dragonboard820c: update readme   Jorge Ramirez-Ortiz
• [PATCH 2/5] clk/qcom: apq8096: fix set rate for the uart clock   Jorge Ramirez-Ortiz
• [PATCH 3/5] clk/qcom: apq8096: fix the sdhci clock   Jorge Ramirez-Ortiz
• [PATCH 4/5] clk: stub: add qcom,glink-smd-rpm   Jorge Ramirez-Ortiz
• [PATCH 5/5] configs: dragonboard820: updates   Jorge Ramirez-Ortiz
• [PATCH v4 00/12] Add imx8mp video support   Miquel Raynal
• [PATCH v6 00/12] Add imx8mp video support   Miquel Raynal
• [PATCH v6 01/12] core: ofnode_graph: Fix a comment   Miquel Raynal
• [PATCH v6 02/12] dm: doc: Fix example   Miquel Raynal
• [PATCH v6 03/12] dm: core: Add a helper to retrieve devices through graph endpoints   Miquel Raynal
• [PATCH v6 04/12] test: dm: test-fdt: Add checks for uclass_get_device_by_endpoint()   Miquel Raynal
• [PATCH v6 05/12] power-domain: Add refcounting   Miquel Raynal
• [PATCH v6 06/12] clk: Ensure the parent clocks are enabled while reparenting   Miquel Raynal
• [PATCH v6 07/12] clk: imx8mp: Add media related clocks   Miquel Raynal
• [PATCH v6 08/12] imx: power-domain: Describe the i.MX8 MEDIAMIX domain   Miquel Raynal
• [PATCH v6 09/12] imx: power-domain: Add support for the MEDIAMIX control block   Miquel Raynal
• [PATCH v6 10/12] video: imx: Fix Makefile in order to be able to add other imx drivers   Miquel Raynal
• [PATCH v6 11/12] video: imx: Add LDB driver   Miquel Raynal
• [PATCH v6 12/12] video: imx: Add LCDIF driver   Miquel Raynal
• [PATCH v5 03/12] dm: core: Add a helper to retrieve devices through graph endpoints   Miquel Raynal
• [PATCH v6 03/12] dm: core: Add a helper to retrieve devices through graph endpoints   Miquel Raynal
• [PATCH v6 12/12] video: imx: Add LCDIF driver   Miquel Raynal
• [PATCH v6 09/12] imx: power-domain: Add support for the MEDIAMIX control block   Miquel Raynal
• [PATCH v6 05/12] power-domain: Add refcounting   Miquel Raynal
• [PATCH v6 05/12] power-domain: Add refcounting   Miquel Raynal
• [PATCH v6 05/12] power-domain: Add refcounting   Miquel Raynal
• [PATCH v6 05/12] power-domain: Add refcounting   Miquel Raynal
• [PATCH v6 05/12] power-domain: Add refcounting   Miquel Raynal
• imx8mp: pci enumeration fails with current HEAD   Miquel Raynal
• imx8mp: pci enumeration fails with current HEAD   Miquel Raynal
• [PATCH] Revert "power-domain: Add refcounting"   Miquel Raynal
• [PATCH] clk: Fix clk_set_parent() regression   Miquel Raynal
• [PATCH] Revert "power-domain: Add refcounting"   Miquel Raynal
• [PATCH 0/2] power-domain: Enable uclass refcounting   Miquel Raynal
• [PATCH 1/2] power-domain: Add support for refcounting (again)   Miquel Raynal
• [PATCH 2/2] imx: power-domain: Enable refcounting on imx8mp   Miquel Raynal
• [PATCH RFC] fdt.c: fdt chosen cmd had off-by-one issue   George Chan via B4 Relay
• [PATCH RFC] bootm: ARM64 EL1 direct jump to kernel start   George Chan via B4 Relay
• [PATCH 0/3] u-boot chain-loading LineageOS bootimg   George Chan via B4 Relay
• [PATCH 1/3] boot/image-android.c: Workaround androidboot kernel/ramdisk addr   George Chan via B4 Relay
• [PATCH 2/3] boot/bootmeth-android.c: Reuse fastboot memory block for unzip kernel   George Chan via B4 Relay
• [PATCH 3/3] mach-snapdragon: Add support to append string to kernel cmdline   George Chan via B4 Relay
• Pull request efi-next-20250104   Tom Rini
• [PATCH v5] spl: remove usage of CMD_BOOT[IZ] from image parsing   Tom Rini
• [PATCH] net: am65-cpsw: cpsw_mdio: fix typo in error message   Tom Rini
• [PATCH] video: ti: am335x: Fix tilcdc clock names.   Tom Rini
• [PATCH 0/2] Add WDT support for J7200 SOC   Tom Rini
• [PATCH v3] configs: am65x_evm_r5_usbdfu_defconfig: Fix USB DFU boot   Tom Rini
• [PATCH v2] configs: am68_sk_r5: Enable AVS config   Tom Rini
• [PATCH 2/2] CI: Build missing binman tools before binman tests   Tom Rini
• [PATCH] doc: build: docker: Fix code-block formatting   Tom Rini
• [PATCH v1 0/3] Enable env in UFS   Tom Rini
• [PATCH v2 5/6] dt-bindings: clock: drop NUM_CLOCKS define for EN7581   Tom Rini
• [PATCH] env: mmc: Fix test for ENV_IS_EMBEDDED   Tom Rini
• [PATCH v2 5/6] dt-bindings: clock: drop NUM_CLOCKS define for EN7581   Tom Rini
• [PATCH 09/17] test/py: Add a test image for Ubuntu   Tom Rini
• [PATCH 01/17] fs: boot: Update fs_read_alloc() to use abuf   Tom Rini
• [PATCH 00/17] bootstd: Useability improvements   Tom Rini
• [PATCH v3 1/2] CI: Move default image under global defaults   Tom Rini
• [PATCH v2 00/56] expo: Various features and improvements   Tom Rini
• Rate of innovation in the project (Was: Re: Rate of change in the project)   Tom Rini
• [PATCH] log: Add helpers for calling log_msg_ret() et al   Tom Rini
• [PATCH v2 5/6] dt-bindings: clock: drop NUM_CLOCKS define for EN7581   Tom Rini
• [PATCH v2 0/6] airoha: Add initial support AN7581   Tom Rini
• [PATCH] Kconfig: Do not "select OF_SEPARATE"   Tom Rini
• [PATCH] cmd: Correct dependency for CMD_LINK_LOCAL   Tom Rini
• [PATCH] Kconfig: Fix "warning: style: quotes recommended" warnings   Tom Rini
• [PATCH v2] u_boot_pylib: Clean up pylint warnings in gitutil.py   Tom Rini
• [PATCH 00/13] video: Enhancements related to truetype and console   Tom Rini
• [PATCH v3 0/0] Switch to using $(PHASE_) in Makefiles   Tom Rini
• [PATCH v3 1/3] Kbuild: Always use $(PHASE_)   Tom Rini
• [PATCH v3 2/3] doc/develop/codingstyle.rst: Add a section on conditional compilation   Tom Rini
• [PATCH v3 3/3] doc/develop/codingstyle.rst: Expand to include CONFIG_IS_ENABLED and PHASE_   Tom Rini
• [PATCH v5] spl: remove usage of CMD_BOOT[IZ] from image parsing   Tom Rini
• [PATCH v2 5/6] dt-bindings: clock: drop NUM_CLOCKS define for EN7581   Tom Rini
• [PATCH v5 38/46] boot: Consider non-bootable partitions   Tom Rini
• [PATCH v5 40/46] boot: Support IO UARTs for earlycon and console   Tom Rini
• [PATCH 00/13] video: Enhancements related to truetype and console   Tom Rini
• [PATCH] env: Introduce support for SPI NAND flash   Tom Rini
• [PATCH] env: Introduce support for SPI NAND flash   Tom Rini
• [PATCH 02/14] net: airoha: Add Airoha Ethernet driver   Tom Rini
• [PATCH 02/14] net: airoha: Add Airoha Ethernet driver   Tom Rini
• Merged v6.14-dts to next branch   Tom Rini
• [PATCH v5 40/46] boot: Support IO UARTs for earlycon and console   Tom Rini
• [PATCH v5 40/46] boot: Support IO UARTs for earlycon and console   Tom Rini
• [PATCH 00/13] video: Enhancements related to truetype and console   Tom Rini
• Rate of innovation in the project (Was: Re: Rate of change in the project)   Tom Rini
• [ANN] U-Boot v2025.04-rc5 released   Tom Rini
• [PATCH v5 40/46] boot: Support IO UARTs for earlycon and console   Tom Rini
• [PATCH 00/13] video: Enhancements related to truetype and console   Tom Rini
• [PATCH v2 00/15] Various toolchain compatibility fixes/improvements   Tom Rini
• [PATCH] onenand: Remove ONENAND_BOOT option   Tom Rini
• [PATCH v3 00/11] fs: exfat: Add exfat port based on exfat-fuse   Tom Rini
• [PATCH v2] arm64: Add MIDR entries for Cortex-A55, A73 and A75   Tom Rini
• Rate of innovation in the project (Was: Re: Rate of change in the project)   Tom Rini
• Pull request efi-2025-04-rc6   Tom Rini
• [PULL] u-boot-at91-fixes-2025.04-a   Tom Rini
• [PATCH v5 38/46] boot: Consider non-bootable partitions   Tom Rini
• [PATCH] fdt: Allow OF_HAS_PRIOR_STAGE to be disabled in defconfig   Tom Rini
• [PATCH v4 0/8] Introduce J742S2 SoC and EVM   Tom Rini
• [PATCH 1/5] acpi_table: Fix IORT RC node   Tom Rini
• [PATCH] fdt: Allow OF_HAS_PRIOR_STAGE to be disabled in defconfig   Tom Rini
• [PATCH 0/4] bloblist: fdt: Clean up the code   Tom Rini
• [PATCH v5 00/29] pxe: Precursor series for supporting read_all() in extlinux / PXE   Tom Rini
• [PATCH 0/4] bloblist: fdt: Clean up the code   Tom Rini
• [PATCH] tiny-printf: Add support for upper case hex values   Tom Rini
• SMBIOS tables missing on 2025.04-rc5 on qemu-x86   Tom Rini
• [PATCH] x86: emulation: Disable bloblist for now   Tom Rini
• [PATCH v2 0/7] membuff: Add tests and update to support a flag for empty/full   Tom Rini
• [PATCH 0/4] bloblist: fdt: Clean up the code   Tom Rini
• [PATCH 0/4] bloblist: fdt: Clean up the code   Tom Rini
• [GIT PULL] Please pull u-boot-amlogic-20250404 into master   Tom Rini
• [PATCH v5 00/29] pxe: Precursor series for supporting read_all() in extlinux / PXE   Tom Rini
• [PATCH] arm64: Fix page permissions for platforms running at EL2   Tom Rini
• [PATCH 0/5] cmd: fuse: Introduce fuse writebuff sub-system and clean up   Tom Rini
• [PATCH] common: Add CONFIG_SKIP_RELOCATE   Tom Rini
• [PATCH v5 00/46] x86: Improve operation under QEMU   Tom Rini
• [PATCH v5 00/29] pxe: Precursor series for supporting read_all() in extlinux / PXE   Tom Rini
• [PATCH v5 00/29] pxe: Precursor series for supporting read_all() in extlinux / PXE   Tom Rini
• [PATCH 1/5] arch/x86: Add 64-bit U-Boot configuration without SPL   Tom Rini
• [PATCH 1/3] arm: mach-k3: Remove undefined Kconfig symbols BOARD and SPL_BOARD   Tom Rini
• [PATCH v5 00/29] pxe: Precursor series for supporting read_all() in extlinux / PXE   Tom Rini
• [PATCH 1/3] arm: mach-k3: Remove undefined Kconfig symbols BOARD and SPL_BOARD   Tom Rini
• [PATCH] arm: dts: k3: Remove leftover file after OF_UPSTREAM   Tom Rini
• [PATCH] arm: mach-k3: j721e: Split out J7200 SoC support from J721e   Tom Rini
• [PATCH] arm: mach-k3: k3-ddr.h: Include spl.h   Tom Rini
• [PATCH 0/3] Enable MUX_MMIO at SPL stage   Tom Rini
• [PATCH 1/1] efi_loader: stop network in EXIT_BOOT_SERVICES   Tom Rini
• [PATCH] x86: emulation: Disable bloblist for now   Tom Rini
• [PATCH] mbedtls: remove incorrect attribute type checker   Tom Rini
• [PATCH] boot: call dhcp_run in pxe bootmethod   Tom Rini
• [PATCH 1/1] efi_loader: stop network in EXIT_BOOT_SERVICES   Tom Rini
• [PATCH 0/4] bloblist: fdt: Clean up the code   Tom Rini
• [PATCH 0/4] bloblist: fdt: Clean up the code   Tom Rini
• [PATCH v5 00/29] pxe: Precursor series for supporting read_all() in extlinux / PXE   Tom Rini
• [PATCH v2 0/4] Add support for RAM boot from maskrom mode   Tom Rini
• Rate of innovation in the project (Was: Re: Rate of change in the project)   Tom Rini
• [PATCH v2 4/4] dm: core: Rename dm_remove_devices_active()   Tom Rini
• [PATCH v5 00/29] pxe: Precursor series for supporting read_all() in extlinux / PXE   Tom Rini
• Gitlab runner timeout on evb-ast2600 ?   Tom Rini
• [PATCH 0/4] bloblist: fdt: Clean up the code   Tom Rini
• [PATCH 1/1] buildman: update PyYAML requirement   Tom Rini
• [PATCH 0/4] bloblist: fdt: Clean up the code   Tom Rini
• Rate of innovation in the project (Was: Re: Rate of change in the project)   Tom Rini
• [PATCH v5 00/29] pxe: Precursor series for supporting read_all() in extlinux / PXE   Tom Rini
• [PATCH 0/4] bloblist: fdt: Clean up the code   Tom Rini
• [PATCH 1/2] acpi: select CONFIG_BLOBLIST   Tom Rini
• [PATCH 2/2] smbios: select CONFIG_BLOBLIST   Tom Rini
• [ANN] U-Boot v2025.04 released   Tom Rini
• [PATCH] doc: release_cycle: fix next release version   Tom Rini
• [PATCH] doc: release_cycle: Use variable substitution for next version   Tom Rini
• [PATCH v2] cmd: fwu: Dump custom fields from mdata structure   Tom Rini
• [ANN] U-Boot v2025.04 released   Tom Rini
• [resend v3 00/12] Add Synopsys MIPI I3C Driver support   Tom Rini
• [PATCH 1/2] Dockerfile: Update to a more current TF-A release tag   Tom Rini
• [PATCH 2/2] Dockerfile: Download the Arm FVP and extract it   Tom Rini
• [PATCH 1/1] doc: update Python requirements   Tom Rini
• [PATCH] tiny-printf: Handle formatting of %p with an extra Kconfig   Tom Rini
• Please pull u-boot-ubi master   Tom Rini
• [PATCH] doc: release_cycle: fix next release version   Tom Rini
• [PATCH v2 00/10] Improve pytest runtime   Tom Rini
• [PATCH 0/5] patman: Separate gitutil fully   Tom Rini
• [PATCH 05/18] net/net: fix switch/case fallthrough annotations   Tom Rini
• [PATCH 05/18] net/net: fix switch/case fallthrough annotations   Tom Rini
• [PATCH 05/18] net/net: fix switch/case fallthrough annotations   Tom Rini
• [PATCH v1] configs: set SPL_TEXT_BASE by default for k3 platforms   Tom Rini
• [PATCH 0/5] patman: Separate gitutil fully   Tom Rini
• [PATCH] tiny-printf: Handle formatting of %p with an extra Kconfig   Tom Rini
• [PATCH] RFC: ext4: Add a few overflow checks in the writing code   Tom Rini
• [PATCH] CI: Disable evb-ast2600   Tom Rini
• [PATCH v2 0/2] Change DRAM message and add RAM doc   Tom Rini
• [PATCH V2] tiny-printf: Improve %X formatting   Tom Rini
• [PATCH 1/3] arm: gic-v3: Scan for subnodes   Tom Rini
• [PATCH 0/5] acpi: simplify updating ACPI table header checksum   Tom Rini
• [PATCH] ata: ahci: remove bad free   Tom Rini
• (subset) [PATCH 00/18] Annotate switch/case fallthrough cases   Tom Rini
• [PATCH] CI: Disable evb-ast2600   Tom Rini
• [PATCH 5/7] binman: Workaround lz4 cli padding in test cases   Tom Rini
• [PATCH] CI: Move to latest container images   Tom Rini
• [PATCH] Dockerfile: Add fdisk   Tom Rini
• [GIT PULL] Please pull u-boot-dfu-20250410 into master   Tom Rini
• [PATCH] Dockerfile: Update to gcc-14.2.0 and clang-18   Tom Rini
• (subset) [PATCH 1/2] Dockerfile: install byacc   Tom Rini
• [PATCH 1/2] Dockerfile: Update to a more current TF-A release tag   Tom Rini
• [PATCH] CI: Move to latest container images   Tom Rini
• [PATCH] Dockerfile: Add fdisk   Tom Rini
• [PATCH] patman: Show the base commit and branch   Tom Rini
• [PATCH] binman: Fix a typo in elf.py   Tom Rini
• [PATCH] patman: Show base commit on each patch when no cover letter   Tom Rini
• [PATCH] test/py: memtest: Fix test for non-trivial parameters   Tom Rini
• [PATCH] tools: add pkg-config for preload_check_sign   Tom Rini
• [PATCH] env: mmc: Fix test for ENV_IS_EMBEDDED   Tom Rini
• [PATCH] dtc: introduce label relative path references   Tom Rini
• [PATCH 0/3] Add UBIFS Support   Tom Rini
• [PATCH v2 0/3] scsi: ensure writes are flushed to disk   Tom Rini
• [PATCH 0/8] *** Add Ethernet boot support for AM62Ax + phyCORE-AM62 SoMs ***   Tom Rini
• Gitlab runner timeout on evb-ast2600 ?   Tom Rini
• [PATCH] common: console: move break; statement   Tom Rini
• [PATCH] armv8: start.S: Subordinate CPUs psci setup vector   Tom Rini
• [PATCH v2 1/2] image-fit-sig: skip in tools build if key is missing   Tom Rini
• [PATCH v2 1/2] dm: blk: Add 'erase' generic block device commands   Tom Rini
• [PATCH v2] configs: set SPL_TEXT_BASE by default for k3 platforms   Tom Rini
• [PATCH] bootm: Add support for passing arguments to elf app   Tom Rini
• [PATCH] bootm: Support load images when os is elf   Tom Rini
• [resend v3 00/12] Add Synopsys MIPI I3C Driver support   Tom Rini
• [PATCH] Dockerfile: Update to gcc-14.2.0 and clang-18   Tom Rini
• Gitlab runner timeout on evb-ast2600 ?   Tom Rini
• Gitlab runner timeout on evb-ast2600 ?   Tom Rini
• Gitlab runner timeout on evb-ast2600 ?   Tom Rini
• Gitlab runner timeout on evb-ast2600 ?   Tom Rini
• [PATCH] buildman: Update to grabbing gcc-14.2.0 toolchains by default   Tom Rini
• [RFC PATCH v1 0/7] Bootstage reports for CI   Tom Rini
• [GIT PULL] Please pull mmc-2025-04-11   Tom Rini
• Pull request efi-2025-07-rc1   Tom Rini
• [GIT PULL] Please pull u-boot-imx-master-20250411   Tom Rini
• [PULL] Please pull qcom-for-2025.07   Tom Rini
• [RFC PATCH v1 1/7] efi_loader: make efi_exit_boot_services() call bootstage_report()   Tom Rini
• [PATCH] tools/make_pip: Use virtualenv when invoking pip   Tom Rini
• [PATCH 09/17] test/py: Add a test image for Ubuntu   Tom Rini
• (subset) [PATCH 1/2] Dockerfile: install byacc   Tom Rini
• [PATCH 1/3] configs: phycore_am64x_a53_defconfig: Enable remoteproc cmd   Tom Rini
• [PATCH v2 1/1] configs: qemu-arm raise CONFIG_NR_DRAM_BANKS   Tom Rini
• [PATCH] cmd: optee: fix hello subcommand argument check   Tom Rini
• [PATCH v3 0/0] Switch to using $(PHASE_) in Makefiles   Tom Rini
• [PATCH v5 00/16] Uthreads   Tom Rini
• [PATCH 00/13] video: Enhancements related to truetype and console   Tom Rini
• [PATCH v2 0/8] binman: Check code-coverage requirements   Tom Rini
• [PATCH 09/17] test/py: Add a test image for Ubuntu   Tom Rini
• Please pull u-boot-tegra staging   Tom Rini
• [PATCH] efi_loader: Moved the generated ESL file to objtree   Tom Rini
• [PATCH v6 05/12] power-domain: Add refcounting   Tom Rini
• [PATCH v6 0/3] Static initcalls   Tom Rini
• [PATCH 0/4] bloblist: fdt: Clean up the code   Tom Rini
• [PATCH] Revert "CI: Disable evb-ast2600"   Tom Rini
• [PATCH v2] emulation: fdt: Allow using U-Boot's device tree with QEMU   Tom Rini
• [PATCH] mach-k3: common_fdt: Fix Label Issue   Tom Rini
• [PATCH v2] emulation: fdt: Allow using U-Boot's device tree with QEMU   Tom Rini
• [PATCH v5 00/16] Uthreads   Tom Rini
• [PATCH] IOMUX: Fix stopping unused dropped consoles   Tom Rini
• [PATCH V2] firmware: ti_sci: Scan all device instances when releasing exclusive devices   Tom Rini
• Pull request for tpm-master-14042025   Tom Rini
• [PATCH] tools/make_pip: Use virtualenv when invoking pip   Tom Rini
• [PATCH] python: Use and refer to the venv module rather than virtualenv   Tom Rini
• [u-boot-test-hooks][PATCH] Add support for FVP emulator and fiptool   Tom Rini
• [PATCH 3/3] arm: dts: am335x: Add nodes for lcdc, panel and backlight   Tom Rini
• [PATCH v2] emulation: fdt: Allow using U-Boot's device tree with QEMU   Tom Rini
• [PATCH v2 0/2] Change DRAM message and add RAM doc   Tom Rini
• [PATCH] tools/make_pip: Use virtualenv when invoking pip   Tom Rini
• [PATCH v1 1/1] include: configs: Adds support for AM335x ICE PRUSS mode   Tom Rini
• [PATCH] arm: mach-k3: am62ax: fix MCU_CLKOUT0 parent clock mux   Tom Rini
• [PATCH v2] common: Add CONFIG_SKIP_RELOCATE   Tom Rini
• [PATCH RESEND] firmware: scmi: support to manage SCMI protocol drivers with a linker-genetated array   Tom Rini
• [PATCH] board: phytec: common: Fix phytec_get_product_name()   Tom Rini
• [PATCH] buildman: Update to grabbing gcc-14.2.0 toolchains by default   Tom Rini
• [PATCH] doc: board: ti: Add optee rng support   Tom Rini
• [PATCH] spin_table: add missing header for ENODEV and ENOSPC symbols   Tom Rini
• [PATCH] mailmap: update my name and email   Tom Rini
• [PATCH] cros_ec_sandbox.c: Drop spi.h include   Tom Rini
• [resend v4 00/12] Add Synopsys MIPI I3C Driver support   Tom Rini
• [PATCH 0/4] bloblist: fdt: Clean up the code   Tom Rini
• [PATCH v1 0/4] k3: migrate SPL_TEXT_BASE to new address   Tom Rini
• [PATCH] bloblist: Drop BSD license   Tom Rini
• [PATCH] bloblist: Drop BSD license   Tom Rini
• Please pull u-boot-marvell/master   Tom Rini
• [PATCH 1/1] net: phy: Add the Airoha EN8811H PHY driver   Tom Rini
• [PATCH v2 00/14] airoha: add support spi/mmc/ethernet   Tom Rini
• [GIT PULL] AMD/Xilinx changes   Tom Rini
• [PATCH v7 1/4] spl: remove usage of CMD_BOOTx from image parsing   Tom Rini
• [PATCH v3 00/22] passage: Define a standard for firmware data flow   Tom Rini
• [PATCH v2 0/5] More MMC fixes   Tom Rini
• [PATCH v3 00/22] passage: Define a standard for firmware data flow   Tom Rini
• [PATCH 0/4] bloblist: fdt: Clean up the code   Tom Rini
• [PATCH v2] emulation: fdt: Allow using U-Boot's device tree with QEMU   Tom Rini
• [PATCH 0/4] bloblist: fdt: Clean up the code   Tom Rini
• [PATCH v3 00/22] passage: Define a standard for firmware data flow   Tom Rini
• [PATCH 0/4] bloblist: fdt: Clean up the code   Tom Rini
• [PATCH v3 2/3] doc/buildman: describe using fragments   Tom Rini
• [PATCH 0/3] booti: Remove the SYS_BOOTM_LEN limit for booti   Tom Rini
• [PATCH v2 1/3] Bring in linux/limits.h   Tom Rini
• [PATCH v2 2/3] Bring in linux/overflow.h   Tom Rini
• [PATCH v2 3/3] ext4: Add a few overflow checks in the writing code   Tom Rini
• [PATCH v4 3/3] doc/buildman: describe using fragments   Tom Rini
• [PATCH 1/1] Dockerfile: use QEMU 9.2.3   Tom Rini
• [PATCH 0/3] booti: Remove the SYS_BOOTM_LEN limit for booti   Tom Rini
• [PATCH] scripts: Fix potential null-deref   Tom Rini
• [PATCH v1] arm: mach-k3: am62px: Fix MCU_CLKOUT0 parent clock mux   Tom Rini
• [PATCH] configs: am65x_evm_a53: convert to a standard boot flow   Tom Rini
• [PATCH] Revert "power-domain: Add refcounting"   Tom Rini
• [PATCH] tools: Fix memory and file descriptor leaks in read_full_file()   Tom Rini
• [PATCH v2 1/3] buildman: allow specifying configuration fragments   Tom Rini
• Pull request efi-2025-07-rc1-2   Tom Rini
• [PATCH 1/4] configs: add qemu_arm64_acpi_defconfig   Tom Rini
• [RFC v2] Dockerfile: use nasm from distfiles.macports.org   Tom Rini
• Community meeting tomorrow (22 April 2025)   Tom Rini
• [GIT PULL] rpi: updates for v2025.07   Tom Rini
• [PULL] u-boot-at91-2025.07-b   Tom Rini
• [PATCH] Revert "net: phy: Add the Airoha EN8811H PHY driver"   Tom Rini
• [PATCH v2 1/3] buildman: allow specifying configuration fragments   Tom Rini
• [u-boot-test-hooks][PATCH] Add support for FVP emulator and fiptool   Tom Rini
• [u-boot-test-hooks PATCH 1/2] travis-ci: Add qemu_arm/64_spl board   Tom Rini
• [PATCH] Revert "net: phy: Add the Airoha EN8811H PHY driver"   Tom Rini
• [PATCH 1/7] fs: exfat: Flush node before put in read() callback   Tom Rini
• [PATCH v2 1/1] fs/squashfs: avoid illegal free() in sqfs_opendir()   Tom Rini
• [u-boot-test-hooks PATCH 1/1] travis-ci: qemu-riscv64_na: add a second network interface   Tom Rini
• Pull request: u-boot-rockchip-20250422   Tom Rini
• Pull request: SoCFPGA changes for u-boot-socfpga-next-20250422   Tom Rini
• Please pull u-boot-i2c master   Tom Rini
• [PATCH] Docker, CI: Add vexpress_fvp / vexpress_fvp_bloblist support   Tom Rini
• [PATCH v1 0/2] Enable UNIT_TEST for all qemu* generic targets   Tom Rini
• [PATCH 0/4] configs: ACPI enabled QEMU defconfigs   Tom Rini
• [PATCH v3 0/2] ut: fix print_guid() and enable UNIT_TEST for qemu_arm64   Tom Rini
• [PATCH v3 00/12] MIPS: Boston: Various enhancements   Tom Rini
• [PATCH] mips: mt7688: gardena-smart-gateway: Increase CONFIG_SYS_BOOTM_LEN   Tom Rini
• Maintenance of Python tools   Tom Rini
• [PATCH] bootstd: Rework BLK dependency   Tom Rini
• [PATCH] Dockerfile: Simplify applying cadence_gem commit to QEMU   Tom Rini
• Please pull net-20250423   Tom Rini
• [GIT PULL] Please pull mmc-2025-04-23   Tom Rini
• Community meeting tomorrow (22 April 2025)   Tom Rini
• Pull request: u-boot-rockchip-20250423   Tom Rini
• [PATCH v6 00/17] Uthreads   Tom Rini
• [PATCH v2 2/2] binman: etype: u_boot_spl_pubkey_dtb: provide more explicit error for key-name-hint with path   Tom Rini
• [PATCH] net: dwc_eth_qos: Fix hang when freeing packet after stop   Tom Rini
• [PATCH] smbios: Do not look up children of invalid nodes   Tom Rini
• [PATCH] test/py: spi: Prevent to overwrite the reserved memory   Tom Rini
• [PATCH v3] configs: set SPL_TEXT_BASE by default for k3 platforms   Tom Rini
• [PATCH v1] arm: dts: am62a: allow booting from eMMC   Tom Rini
• [PATCH v1] mach-k3: add eMMC FS boot support for am62[ap]   Tom Rini
• [PATCH v3] mach-k3: common_fdt: Move carveout struct   Tom Rini
• [PATCH] arm: mach-k3: r5: j7200: Add clk dev data for WKUP UART   Tom Rini
• [CAD QSPI v2] spi: cadence-qspi: Add disable STIG mode quikrs.   Tom Rini
• [RFC] Expected behavior of the go command   Tom Rini
• bootflow: extlinux and menu   Tom Rini
• [PATCH 1/2] bootstd: Add implementation for bootmeth rauc   Tom Rini
• [PATCH] bootstd: Rework BLK dependency   Tom Rini
• [PATCH v2 2/2] binman: etype: u_boot_spl_pubkey_dtb: provide more explicit error for key-name-hint with path   Tom Rini
• Maintenance of Python tools   Tom Rini
• [PATCH] cmd: cls: do not repeat clearing of console   Tom Rini
• [GIT PULL] Please pull u-boot-dfu-20250424 into master   Tom Rini
• [PATCH v3 0/4] More MMC fixes   Tom Rini
• [PATCH 0/2] arm: mach-k3: remove some firewalls left over by ROM   Tom Rini
• [PATCH 0/3] Add PCIe support for TI AM64 SoC   Tom Rini
• [PATCH v1 1/1] Initial support for Wiznet W5500   Tom Rini
• Maintenance of Python tools   Tom Rini
• [PATCH] python: Use and refer to the venv module rather than virtualenv   Tom Rini
• [PATCH v2] tools/make_pip: Use venv when invoking pip   Tom Rini
• [PATCH 1/4] build: Respect CONFIG_SPL_BUILD in DT sources   Tom Rini
• [PATCH] mtd: mtdparts: calculate mtd partition offset before calculating size   Tom Rini
• [PATCH 1/2] bootstd: Add implementation for bootmeth rauc   Tom Rini
• [PATCH 1/2] bootstd: Add implementation for bootmeth rauc   Tom Rini
• [PATCH v5 9/9] doc: ti: am62: add falcon mode documentation   Tom Rini
• Pull request efi-2025-07-rc1-3   Tom Rini
• [GIT PULL] u-boot-riscv/master   Tom Rini
• [GIT PULL] u-boot-riscv/master   Tom Rini
• [GIT PULL] u-boot-riscv/master   Tom Rini
• [PATCH v2] board: starfive: visionfive2: Order board detection logic to match config   Tom Rini
• [PATCH 1/2] Makefile: Strip leading spaces when preprocessing generated_defconfig   Tom Rini
• [PATCH 1/2] Makefile: Strip leading spaces when preprocessing generated_defconfig   Tom Rini
• [PATCH 1/2] bootstd: Add implementation for bootmeth rauc   Tom Rini
• [PATCH 3/3] board: phytec: phycore_am62ax: Update Environment   Tom Rini
• [PATCH] bootm: improve error message when gzip decompression buffer is too small   Tom Rini
• [PATCH v5 9/9] doc: ti: am62: add falcon mode documentation   Tom Rini
• [PULL] Pull request for u-boot master / v2025.07 = u-boot-stm32-20250428   Tom Rini
• [PATCH v2 1/2] bloblist: fix the overriding of fdt from bloblist   Tom Rini
• [GIT PULL] Please pull u-boot-imx-master-20250428   Tom Rini
• Pull request: u-boot-sunxi/master for v2025.07   Tom Rini
• [PATCH 0/6] Apple RTKit improvements   Tom Rini
• [PATCH] net: ti: am65-cpsw-nuss: invoke phy_config() in driver's .start callback   Tom Rini
• [PATCH] cros_ec_sandbox.c: Drop spi.h include   Tom Rini
• [PATCH] cmd: Kconfig: Fix typos   Tom Rini
• [PATCH] lmb: use a different bit position for LMB_NOMAP   Tom Rini
• [PATCH] mkimage: fix option parsing segfault   Tom Rini
• [PATCH] mtd: mtdparts: calculate mtd partition offset before calculating size   Tom Rini
• [ANN] U-Boot v2025.07-rc1 released   Tom Rini
• Missing UTHREAD doc annotations   Tom Rini
• Fwd: New Defects reported by Coverity Scan for Das U-Boot   Tom Rini
• [PATCH v3 14/17] coreboot: Move timestamp parsing to generic place   Tom Rini
• [PATCH v3 06/17] coreboot: Move coreboot logic out of x86 to a generic place   Tom Rini
• [PATCH v3 07/17] coreboot: Locate table earlier than arch_cpu_init()   Tom Rini
• [PATCH v3 09/17] cmd/cbsysinfo: Skip the CMOS 'option_table' when not present   Tom Rini
• [PATCH v1 1/1] Initial support for Wiznet W5500   Tom Rini
• [PATCH 1/2] include: env: ti: mmc.h: Find DTB files in dtb directory for AM57xx   Tom Rini
• [PATCH 00/30] patman: Move to asyncio and other updates   Tom Rini
• Missing UTHREAD doc annotations   Tom Rini
• [PATCH 2/2] tools: Update the license specifiers   Tom Rini
• [PATCH] bootm: improve error message when gzip decompression buffer is too small   Tom Rini
• [PATCH 3/3] board: phytec: phycore_am62ax: Update Environment   Tom Rini
• [PATCH 2/2] tools: Update the license specifiers   Tom Rini
• [PATCH 00/30] patman: Move to asyncio and other updates   Tom Rini
• [PATCH v3 00/22] passage: Define a standard for firmware data flow   Tom Rini
• [PATCH 1/2] mmc: rockchip_dw_mmc: Enable by default for all supported SoCs   Tom Rini
• [PATCH v3 00/22] passage: Define a standard for firmware data flow   Tom Rini
• [PATCH 1/2] Makefile: Strip leading spaces when preprocessing generated_defconfig   Tom Rini
• [PATCH] bootm: improve error message when gzip decompression buffer is too small   Tom Rini
• [PATCH] Docker, CI: Add vexpress_fvp / vexpress_fvp_bloblist support   Tom Rini
• [ANN] U-Boot v2025.07-rc1 released   Tom Rini
• [REGRESSION] [PATCH v6 0/3] Static initcalls   Tom Rini
• [PATCH v1] arm: add call to cleanup_before_linux for go command   Tom Rini
• [PATCH 00/30] patman: Move to asyncio and other updates   Tom Rini
• [PATCH v3 00/22] passage: Define a standard for firmware data flow   Tom Rini
• [PATCH v2 1/1] bootm: improve error message when gzip decompression buffer is too small   Tom Rini
• [PATCH v3 00/22] passage: Define a standard for firmware data flow   Tom Rini
• [REGRESSION] [PATCH v6 0/3] Static initcalls   Tom Rini
• [PATCH v1] arm: add call to cleanup_before_linux for go command   Tom Rini
• [PATCH v1] arm: add call to cleanup_before_linux for go command   Tom Rini
• Fwd: New Defects reported by Coverity Scan for Das U-Boot   Tom Rini
• [PATCH] mtd: spi-nor: Add NO_CHIP_ERASE flag for mt35xu01g/2g   Tom Rini
• [PATCH] mtd: spi-nor: Use CONFIG_IS_ENABLED for CONFIG_SPI_FLASH_BAR defines   Tom Rini
• [2nd RESEND PATCH 0/2] Add support for Infineon S28HL256T and S28HL02GT   Tom Rini
• [PATCH] drivers: spi: Fix data loss issue in QSPI   Tom Rini
• [PATCH] Revert "mtd: spi-nor: Remove recently added SST special case"   Tom Rini
• [PATCH] common: board: fix build condition of noncached memory initcall   Tom Rini
• [RESEND PATCH] clk: fix crash on clk_set_rate clean rate cache   Tom Rini
• [PATCH] bloblist: Drop BSD license   Tom Rini
• [PATCH v1] arm: add call to cleanup_before_linux for go command   Tom Rini
• Fwd: New Defects reported by Coverity Scan for Das U-Boot   Tom Rini
• [PATCH v1] arm: add call to cleanup_before_linux for go command   Tom Rini
• [PATCH v1] arm: add call to cleanup_before_linux for go command   Tom Rini
• [PATCH 1/1] rpi: copy over uart clock-frequency in DT   Peter Robinson
• [GIT PULL] rpi: updates for v2025.07   Peter Robinson
• [PATCH v4 1/5] rpi: Add myself to the list of maintainers   Peter Robinson
• [PATCH v4 2/5] rpi: Set bootm_size to 512MB   Peter Robinson
• [PATCH v4 4/5] rpi: Update environment to support booti and large initrd   Peter Robinson
• [PATCH v4 3/5] rpi: Drop fdt_high and initrd_high   Peter Robinson
• Unexpected RPi5 Behavior with Saved U-Boot Environment   Peter Robinson
• [PATCH v4 5/5] rpi: Use the U-Boot control FDT for fdt_addr   Peter Robinson
• [PATCH 0/3] efi: Add EFI Debug Support Table feature   Peter Robinson
• [PATCH] configs: mvebu_espressobin_ultra-88f3720_defconfig: disable SATA   Stefan Roese
• [PATCH] arm: mvebu: Fix typos in Kconfig help text   Stefan Roese
• [PATCH] ARM: mvebu: Correct SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR usage   Stefan Roese
• [PATCH] cmd: mvebu/bubt: Correct usage of IS_ENABLED() macro   Stefan Roese
• [PATCH v2] configs: clearfog,helios4: disable sdhci sdma   Stefan Roese
• Please pull u-boot-marvell/master   Stefan Roese
• [PATCH] cmd: tlv_eeprom: return after successful read from EEPROM   Stefan Roese
• [PATCH v3] watchdog: qcom: introduce qcom-wdt driver   Stefan Roese
• [PATCH] configs: mvebu_espressobin_ultra-88f3720_defconfig: enable hwrng   Stefan Roese
• [PATCH v2 2/3] tegra: respect CONFIG_TEGRA_ENABLE_UART* options on Transformer T20   Svyatoslav Ryhel
• [PATCH v2 3/3] tegra: allow to expose UART on microSD slot   Svyatoslav Ryhel
• [PATCH v2 0/1] sysreset: add PHASE_ to GPIO reset and poweroff configs   Svyatoslav Ryhel
• [PATCH v2 1/1] sysreset: diverge GPIO reset and poweroff configs per-phase   Svyatoslav Ryhel
• [PATCH v2 1/1] sysreset: diverge GPIO reset and poweroff configs per-phase   Svyatoslav Ryhel
• [PATCH v1 0/3] ARM: tegra: replace per-device config headers with generic   Svyatoslav Ryhel
• [PATCH v1 1/3] ARM: tegra: board: set CFG_SYS_NS16550_COM1 according to TEGRA_ENABLE_UART   Svyatoslav Ryhel
• [PATCH v1 2/3] ARM: tegra: convert CFG_TEGRA_BOARD_STRING into Kconfig option   Svyatoslav Ryhel
• [PATCH v1 3/3] ARM: tegra: replace per-device config headers with generic Tegra   Svyatoslav Ryhel
• [PATCH v2 0/3] Tegra 4: add support for Asus TF701T and Nvidia Tegratab   Svyatoslav Ryhel
• [PATCH v2 1/3] ARM: tegra114: clock: avoid touching DISP clocks on init   Svyatoslav Ryhel
• [PATCH v2 2/3] board: asus: transformer: add ASUS Transformer Pad TF701T support   Svyatoslav Ryhel
• [PATCH v2 3/3] board: nvidia: tegratab: add Nvidia Tegra Note 7 support   Svyatoslav Ryhel
• [PATCH v5 00/29] pxe: Precursor series for supporting read_all() in extlinux / PXE   Svyatoslav Ryhel
• [PATCH v5 00/29] pxe: Precursor series for supporting read_all() in extlinux / PXE   Svyatoslav Ryhel
• [PATCH] boot: Add missing code for bootz_run()   Svyatoslav Ryhel
• [PATCH v2 1/3] tegra: add funcmux for exposing UART over uSD slot on Tegra 20   Svyatoslav Ryhel
• Please pull u-boot-tegra staging   Svyatoslav Ryhel
• [PATCH v1 0/9] Tegra 2: add support for LG Optimus 2X P990   Svyatoslav Ryhel
• [PATCH v1 1/9] gpio: tegra_gpio: implement rfree operation   Svyatoslav Ryhel
• [PATCH v1 2/9] power: pmic: add the base MAX8907 PMIC support   Svyatoslav Ryhel
• [PATCH v1 3/9] power: regulator: max9807: add regulator support   Svyatoslav Ryhel
• [PATCH v1 4/9] sysreset: implement MAX9807 sysreset functions   Svyatoslav Ryhel
• [PATCH v1 5/9] video: tegra: add 8-bit CPU driven protocol   Svyatoslav Ryhel
• [PATCH v1 6/9] video: panel: add Hitachi TX10D07VM0BAA MIPI DSI panel driver   Svyatoslav Ryhel
• [PATCH v1 7/9] video: panel: add LG LH400WV3-SD04 MIPI DSI panel driver   Svyatoslav Ryhel
• [PATCH v1 8/9] video: backlight: add Skyworks/Analogictech AAT2870 led controller driver   Svyatoslav Ryhel
• [PATCH v1 9/9] board: lg: star: add Optimus 2X P990 support   Svyatoslav Ryhel
• [PATCH v1 0/4] Tegra: general board changes   Svyatoslav Ryhel
• [PATCH v1 1/4] ARM: tegra: add PRAM Kconfig option   Svyatoslav Ryhel
• [PATCH v1 2/4] ARM: tegra: convert boards to use TEGRA_PRAM   Svyatoslav Ryhel
• [PATCH v1 3/4] ARM: tegra: set default SYS_CONFIG_NAME from SoC Kconfig   Svyatoslav Ryhel
• [PATCH v1 4/4] ARM: tegra: drop CONFIG_DISABLE_SDMMC1_EARLY   Svyatoslav Ryhel
• [PATCH] watchdog: qcom: introduce qcom-wdt driver   Paul Sajna
• [PATCH] watchdog: qcom: introduce qcom-wdt driver   Paul Sajna
• [PATCH v2 0/2] watchdog: qcom: introduce qcom-wdt driver   Paul Sajna
• [PATCH v2 1/2] watchdog: qcom: introduce qcom-wdt driver   Paul Sajna
• [PATCH v2 2/2] watchdog: qcom: improve driver with more functionality   Paul Sajna
• [PATCH v2 0/2] watchdog: qcom: introduce qcom-wdt driver   Paul Sajna
• [PATCH v2 2/2] watchdog: qcom: improve driver with more functionality   Paul Sajna
• [PATCH v2 2/2] watchdog: qcom: improve driver with more functionality   Paul Sajna
• [PATCH v3] watchdog: qcom: introduce qcom-wdt driver   Paul Sajna
• [PATCH v3] watchdog: qcom: introduce qcom-wdt driver   Paul Sajna
• [PATCH 0/3] Add PCIe support for TI AM64 SoC   Hrushikesh Salunke
• [PATCH 1/3] pci: pcie_cdns_ti: Include linux/sizes.h header   Hrushikesh Salunke
• [PATCH 2/3] pci: pcie_cdns_ti: Enable PCIe root-complex mode in AM64 SoC   Hrushikesh Salunke
• [PATCH 3/3] configs: am64x_evm_a53_defconfig: Enable configs for PCIe support   Hrushikesh Salunke
• Unexpected RPi5 Behavior with Saved U-Boot Environment   Mauro Salvini
• [PATCH] bloblist: Drop BSD license   Karen M. Sandler
• [PATCH] cmd: tlv_eeprom: return after successful read from EEPROM   Martin Schiller
• [PATCH 1/2] i2c: mediatek: add missing empty entry at end of mkt_i2c_ids[]   Martin Schiller
• [PATCH 2/2] i2c: mediatek: remove duplicate entry in mt_i2c_regs_v1[]   Martin Schiller
• [PATCH] configs: mvebu_espressobin_ultra-88f3720_defconfig: enable hwrng   Benjamin Schneider
• [PATCH v1 0/8] This series introduces U-Boot tests with tbot on real hardware.   Heiko Schocher
• [PATCH v1 1/8] test/py/requirements.txt: update coverage   Heiko Schocher
• [PATCH v1 2/8] tools/buildman/requirements.txt: update coverage   Heiko Schocher
• [PATCH v1 3/8] test/py/requirements.txt: increase filelock version   Heiko Schocher
• [PATCH v1 4/8] test/py/requirements.txt: remove unittest2 and testtools   Heiko Schocher
• [PATCH v1 5/8] test: increase timeouts   Heiko Schocher
• [PATCH v1 6/8] [RFC] CI: add U-Boot testing on real HW with tbot   Heiko Schocher
• [PATCH v1 7/8] .gitlab-ci.yml: add tbot-lab   Heiko Schocher
• [PATCH v1 8/8] scripts: add helper for getting infos from your patchwork ToDo list   Heiko Schocher
• [PATCH v2 0/8] This series introduces U-Boot tests with tbot on real hardware.   Heiko Schocher
• [PATCH v2 1/8] test/py/requirements.txt: update coverage   Heiko Schocher
• [PATCH v2 2/8] tools/buildman/requirements.txt: update coverage   Heiko Schocher
• [PATCH v2 3/8] test/py/requirements.txt: increase filelock version   Heiko Schocher
• [PATCH v2 4/8] test/py/requirements.txt: remove unittest2 and testtools   Heiko Schocher
• [PATCH v2 5/8] test: increase timeouts   Heiko Schocher
• [PATCH v2 6/8] [RFC] CI: add U-Boot testing on real HW with tbot   Heiko Schocher
• [PATCH v2 7/8] .gitlab-ci.yml: add tbot-lab   Heiko Schocher
• [PATCH v2 8/8] scripts: add helper for getting infos from your patchwork ToDo list   Heiko Schocher
• [PATCH v2] ubi: fix bug creating partitions for non-existent volumes   Heiko Schocher
• Please pull u-boot-ubi master   Heiko Schocher
• [PATCH v2 2/4] i2c: omap24xx_i2c: Use new function __omap24_i2c_xfer_msg()   Heiko Schocher
• [PATCH] gpio: zynq: Read using DATA register when direction is output   Heiko Schocher
• [PATCH] mtd: ubi: Put MTD device after it is not used   Heiko Schocher
• [PATCH v1 0/3] Updates for the siemens cxg3 for 2025.07   Heiko Schocher
• [PATCH v1 1/3] imx8qxp: capricorn defconfig: collect common Kconfig options   Heiko Schocher
• [PATCH v1 2/3] siemens: capricorn: enable text based default environment   Heiko Schocher
• [PATCH v1 3/3] siemens: capricorn: add ahab command and enable watchdog   Heiko Schocher
• [PATCH 1/2] i2c: mediatek: add missing empty entry at end of mkt_i2c_ids[]   Heiko Schocher
• [PATCH 2/2] i2c: mediatek: remove duplicate entry in mt_i2c_regs_v1[]   Heiko Schocher
• imx8mp: pci enumeration fails with current HEAD   Heiko Schocher
• imx8mp: pci enumeration fails with current HEAD   Heiko Schocher
• imx8mp: pci enumeration fails with current HEAD   Heiko Schocher
• imx8mp: pci enumeration fails with current HEAD   Heiko Schocher
• [PATCH v3 1/4] i2c: omap24xx_i2c: Remove unused CONFIG_I2C_REPEATED_START   Heiko Schocher
• [PATCH v3 2/4] i2c: omap24xx_i2c: Use new function __omap24_i2c_xfer_msg()   Heiko Schocher
• [PATCH v3 3/4] i2c: omap24xx_i2c: support CONFIG for repeated start in DM_I2C xfer   Heiko Schocher
• [PATCH v3 4/4] drivers: i2c: Kconfig: Add CONFIG_SYS_I2C_OMAP24XX_REPEATED_START   Heiko Schocher
• [PATCH v3 1/4] i2c: omap24xx_i2c: Remove unused CONFIG_I2C_REPEATED_START   Heiko Schocher
• [PATCH v3 2/4] i2c: omap24xx_i2c: Use new function __omap24_i2c_xfer_msg()   Heiko Schocher
• [PATCH v3 3/4] i2c: omap24xx_i2c: support CONFIG for repeated start in DM_I2C xfer   Heiko Schocher
• [PATCH v3 4/4] drivers: i2c: Kconfig: Add CONFIG_SYS_I2C_OMAP24XX_REPEATED_START   Heiko Schocher
• [PATCH 1/2] i2c: mediatek: add missing empty entry at end of mkt_i2c_ids[]   Heiko Schocher
• [PATCH 2/2] i2c: mediatek: remove duplicate entry in mt_i2c_regs_v1[]   Heiko Schocher
• Please pull u-boot-i2c master   Heiko Schocher
• [PATCH 1/1] configs: add UNIT_TESTS to big-endian Malta boards   Heiko Schocher
• [PATCH 1/2] power-domain: Add support for refcounting (again)   Heiko Schocher
• [PATCH 2/2] imx: power-domain: Enable refcounting on imx8mp   Heiko Schocher
• [PATCH v1 1/3] imx8qxp: capricorn defconfig: collect common Kconfig options   Heiko Schocher
• [PATCH v1 3/3] siemens: capricorn: add ahab command and enable watchdog   Heiko Schocher
• [PATCH v1 2/3] siemens: capricorn: enable text based default environment   Heiko Schocher
• [PATCH v2 0/5] Updates for the siemens cxg3 for 2025.07   Heiko Schocher
• [PATCH v2 1/5] imx8qxp: capricorn defconfig: collect common Kconfig options   Heiko Schocher
• [PATCH v2 2/5] siemens: capricorn: enable text based default environment   Heiko Schocher
• [PATCH v2 3/5] siemens: capricorn: defconfig updates   Heiko Schocher
• [PATCH v2 4/5] arm: imx8qxp: capricorn: move env offset settings   Heiko Schocher
• [PATCH v2 5/5] siemens: imx8qxp: remove unused config file   Heiko Schocher
• [PATCH] Revert "net: eth_bootdev_hunt() should not run DHCP"   Heinrich Schuchardt
• [PATCH v1 1/3] scsi: Implement get_blk() function   Heinrich Schuchardt
• [PATCH] acpi: Fix table length for QEMU   Heinrich Schuchardt
• Pull request efi-2025-04-rc6   Heinrich Schuchardt
• [PATCH 1/1] configs: qemu-riscv raise CONFIG_NR_DRAM_BANKS   Heinrich Schuchardt
• [PATCH 1/1] configs: qemu-riscv raise CONFIG_NR_DRAM_BANKS   Heinrich Schuchardt
• [PATCH v2 1/1] configs: qemu-arm raise CONFIG_NR_DRAM_BANKS   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: stop network in EXIT_BOOT_SERVICES   Heinrich Schuchardt
• Re: [PATCH 3/3] efi_loader: Move device-removal later in exit-boot-services   Heinrich Schuchardt
• [PATCH 1/3] net: designware: Disable DMA on removal   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: stop network in EXIT_BOOT_SERVICES   Heinrich Schuchardt
• [PATCH 0/2] acpi,smbios: select CONFIG_BLOBLIST   Heinrich Schuchardt
• [PATCH 1/2] acpi: select CONFIG_BLOBLIST   Heinrich Schuchardt
• [PATCH 2/2] smbios: select CONFIG_BLOBLIST   Heinrich Schuchardt
• [PATCH 1/1] buildman: update PyYAML requirement   Heinrich Schuchardt
• [PATCH 1/1] doc/buildman: typo 'require'   Heinrich Schuchardt
• [PATCH 1/1] buildman: update PyYAML requirement   Heinrich Schuchardt
• [PATCH v2 3/4] efi_loader: Move device-removal later in exit-boot-services   Heinrich Schuchardt
• [PATCH v2 4/4] dm: core: Rename dm_remove_devices_active()   Heinrich Schuchardt
• [PATCH v2 1/3] part: add part_get_info_cached() API   Heinrich Schuchardt
• [PATCH v2 2/3] part: efi: add GPT PTE cache used with part_get_info_cached() API   Heinrich Schuchardt
• [PATCH v2] cmd: fwu: Dump custom fields from mdata structure   Heinrich Schuchardt
• [PATCH 1/1] doc: update Python requirements   Heinrich Schuchardt
• [PATCH v3 0/8] board: starfive: DeepComputing FML13V01   Heinrich Schuchardt
• [PATCH v3 1/8] configs: add jh7110-deepcomputing-fml13v01 to VF2 defconfig   Heinrich Schuchardt
• [PATCH v3 2/8] riscv: dts: jh7110: add DeepComputing FML13V01 device-tree   Heinrich Schuchardt
• [PATCH v3 3/8] board: starfive: DeepComputing FML13V01 fdt selection   Heinrich Schuchardt
• [PATCH v3 4/8] board: starfive: spl: support DeepComputing FML13V01   Heinrich Schuchardt
• [PATCH v3 5/8] doc: add DeepComputing FML13V01 documentation   Heinrich Schuchardt
• [PATCH v3 6/8] doc: starfive: use consistent formatting   Heinrich Schuchardt
• [PATCH v3 7/8] doc: starfive: use jh7110_common.rst   Heinrich Schuchardt
• [PATCH v3 8/8] doc: jh7110: describe debug UART   Heinrich Schuchardt
• [PATCH v2 1/2] net-lwip: wget: add LMB and buffer checks   Heinrich Schuchardt
• [PATCH 1/1] efi_selftest: check executing in EL2   Heinrich Schuchardt
• [PATCH] efi_selftest: use do_bootefi_exec()   Heinrich Schuchardt
• [PATCH v2] efi: Make FDT extra space configurable   Heinrich Schuchardt
• [PATCH] efi: Fix efiboot for payloads loaded from memory   Heinrich Schuchardt
• [PATCH] efi_loader: Print extra information from the bootmgr   Heinrich Schuchardt
• [PATCH] fs/sqaushfs: avoid illegal free() in sqfs_opendir()   Heinrich Schuchardt
• [PATCH] Dockerfile: Update to gcc-14.2.0 and clang-18   Heinrich Schuchardt
• [PATCH 1/3] efi_loader: efi_load_initrd: provide a memory mapped initrd   Heinrich Schuchardt
• [PATCH 1/1] efi_selftest: check executing in EL2   Heinrich Schuchardt
• Pull request efi-2025-07-rc1   Heinrich Schuchardt
• [PATCH] x86: efi_loader: Ensure the SMBIOS tables are sent via EFI   Heinrich Schuchardt
• [PATCH 1/1] mmc: type 'Relatvie'   Heinrich Schuchardt
• [PATCH v2 1/1] fs/squashfs: avoid illegal free() in sqfs_opendir()   Heinrich Schuchardt
• [PATCH] net: make initr_net() invocation command line agnostic   Heinrich Schuchardt
• [PATCH 08/16] efi_driver: efi_net: UCLASS_ETH driver for EFI net devices   Heinrich Schuchardt
• [PATCH 12/16] efi_loader: efi_net: add snp_owner field to efi_net_obj struct   Heinrich Schuchardt
• [PATCH 05/16] efi_net: efi_loader: Add efi_netobj_alloc to allocate an efi_net_obj   Heinrich Schuchardt
• [PATCH 11/16] efi_loader: efi_net: Add http, ip4_config2, and pxe on demand   Heinrich Schuchardt
• [u-boot-test-hooks PATCH 1/1] travis-ci: qemu-riscv64_na: add a second network interface   Heinrich Schuchardt
• [PATCH 10/16] efi_driver: efi_net: Add efi_net_unbind_drv method to efi_net driver   Heinrich Schuchardt
• [PATCH 09/16] efi_driver: efi_uclass: Add unbind method to efi_driver_ops   Heinrich Schuchardt
• [PATCH v1 1/2] test: fix print_guid()   Heinrich Schuchardt
• [PATCH v1 2/2] qemu-arm64: enable UNIT_TEST   Heinrich Schuchardt
• [PATCH v1 1/2] test: fix print_guid()   Heinrich Schuchardt
• [PATCH v2 1/2] lib/uuid.c: use unique name for PARTITION_SYSTEM_GUID   Heinrich Schuchardt
• [PATCH v2] emulation: fdt: Allow using U-Boot's device tree with QEMU   Heinrich Schuchardt
• [PATCH 1/1] doc: dt_qemu: correct dumpdtb description   Heinrich Schuchardt
• Re: [PATCH v3 1/2] lib/uuid.c: use unique name for PARTITION_SYSTEM_GUID   Heinrich Schuchardt
• [PATCH v2 0/3] buildman: allow specifying configuration fragments   Heinrich Schuchardt
• [PATCH v2 1/3] buildman: allow specifying configuration fragments   Heinrich Schuchardt
• [PATCH v2 2/3] doc/buildman: describe using fragments   Heinrich Schuchardt
• [PATCH v2 3/3] buildman: unit test for configuration fragments   Heinrich Schuchardt
• [resend v4 09/12] cmd: Add i3c command support.   Heinrich Schuchardt
• [resend v4 03/12] drivers: i3c: Add i3c uclass driver.   Heinrich Schuchardt
• [PATCH v3 0/3] buildman: allow specifying configuration fragments   Heinrich Schuchardt
• [PATCH v3 1/3] buildman: allow specifying configuration fragments   Heinrich Schuchardt
• [PATCH v3 2/3] doc/buildman: describe using fragments   Heinrich Schuchardt
• [PATCH v3 3/3] buildman: unit test for configuration fragments   Heinrich Schuchardt
• [PATCH 1/1] Dockerfile: use QEMU 9.2.3   Heinrich Schuchardt
• [PATCH v4 0/3] doc/buildman: describe using fragments   Heinrich Schuchardt
• [PATCH v4 1/3] buildman: allow specifying configuration fragments   Heinrich Schuchardt
• [PATCH v4 2/3] buildman: unit test for configuration fragments   Heinrich Schuchardt
• [PATCH v4 3/3] doc/buildman: describe using fragments   Heinrich Schuchardt
• [PATCH v2 1/3] buildman: allow specifying configuration fragments   Heinrich Schuchardt
• [PATCH v2 1/3] buildman: allow specifying configuration fragments   Heinrich Schuchardt
• [PATCH v2 1/3] buildman: allow specifying configuration fragments   Heinrich Schuchardt
• [PATCH v5 0/3] doc/buildman: describe using fragments   Heinrich Schuchardt
• [PATCH v5 1/3] buildman: allow specifying configuration fragments   Heinrich Schuchardt
• [PATCH v5 2/3] buildman: unit test for configuration fragments   Heinrich Schuchardt
• [PATCH v5 3/3] doc/buildman: describe using fragments   Heinrich Schuchardt
• [PATCH v2 1/3] buildman: allow specifying configuration fragments   Heinrich Schuchardt
• [PATCH 0/4] configs: ACPI enabled QEMU defconfigs   Heinrich Schuchardt
• [PATCH 1/4] configs: add qemu_arm64_acpi_defconfig   Heinrich Schuchardt
• [PATCH 2/4] MAINTAINERS: add all qemu_arm64* defconfigs to VIRT   Heinrich Schuchardt
• [PATCH 3/4] configs: add qemu-riscv64_smode_acpi_defconfig   Heinrich Schuchardt
• [PATCH 4/4] MAINTAINERS: add qemu-riscv* defconfigs to QEMU RISC-V 'VIRT' BOARD   Heinrich Schuchardt
• [RFC 1/1] Dockerfile: use nasm from distfiles.macports.org   Heinrich Schuchardt
• [RFC v2] Dockerfile: use nasm from distfiles.macports.org   Heinrich Schuchardt
• [PATCH 1/1] boot: BOOTMETH_DISTRO should select BOOTMETH_EFI_BOOTMGR   Heinrich Schuchardt
• [PATCH] cmd: Kconfig: Fix typos   Heinrich Schuchardt
• [RFC 0/8] boot: run EFI boot manager after block devices   Heinrich Schuchardt
• [RFC 1/8] boot: EFI boot manager does not depend on BootOrder   Heinrich Schuchardt
• [RFC 2/8] boot: BOOTMETH_DISTRO should select BOOTMETH_EFI_BOOTMGR   Heinrich Schuchardt
• [RFC 3/8] boot: make BOOTMETH_EFILOADER default=n   Heinrich Schuchardt
• [RFC 4/8] boot: introduce BOOTDEVP_6_EFI   Heinrich Schuchardt
• [RFC 5/8] boot: prevent recursion in bootdev_hunt_drv()   Heinrich Schuchardt
• [RFC 6/8] boot: make EFI boot manager bootmeth non-global   Heinrich Schuchardt
• [RFC 7/8] efi_loader: create EFI BOOTDEV   Heinrich Schuchardt
• [RFC 8/8] board/emulation/qemu-arm: enable EFI boot manager   Heinrich Schuchardt
• [PATCH 1/1] boot: BOOTMETH_DISTRO should select BOOTMETH_EFI_BOOTMGR   Heinrich Schuchardt
• NET_LWIP breaks common/log_syslog.c   Heinrich Schuchardt
• Re: [PATCH v1 2/2] board: starfive: visionfive2: Drop setting of $fdtfile   Heinrich Schuchardt
• PXE is broken on LWIP   Heinrich Schuchardt
• [PATCH 1/1] configs: add UNIT_TESTS to big-endian Malta boards   Heinrich Schuchardt
• [PATCH 1/1] configs: add UNIT_TESTS to big-endian Malta boards   Heinrich Schuchardt
• [RFC 7/8] efi_loader: create EFI BOOTDEV   Heinrich Schuchardt
• [RFC 2/8] boot: BOOTMETH_DISTRO should select BOOTMETH_EFI_BOOTMGR   Heinrich Schuchardt
• [PATCH 1/1] boot: BOOTMETH_DISTRO should select BOOTMETH_EFI_BOOTMGR   Heinrich Schuchardt
• Maintenance of Python tools   Heinrich Schuchardt
• [PATCH] Dockerfile: Simplify applying cadence_gem commit to QEMU   Heinrich Schuchardt
• [PATCH v4 0/8] board: starfive: DeepComputing FML13V01   Heinrich Schuchardt
• [PATCH v4 1/8] configs: add jh7110-deepcomputing-fml13v01 to VF2 defconfig   Heinrich Schuchardt
• [PATCH v4 2/8] riscv: dts: jh7110: add DeepComputing FML13V01 device-tree   Heinrich Schuchardt
• [PATCH v4 3/8] board: starfive: DeepComputing FML13V01 fdt selection   Heinrich Schuchardt
• [PATCH v4 4/8] board: starfive: spl: support DeepComputing FML13V01   Heinrich Schuchardt
• [PATCH v4 5/8] doc: add DeepComputing FML13V01 documentation   Heinrich Schuchardt
• [PATCH v4 6/8] doc: starfive: use consistent formatting   Heinrich Schuchardt
• [PATCH v4 7/8] doc: starfive: use jh7110_common.rst   Heinrich Schuchardt
• [PATCH v4 8/8] doc: jh7110: describe debug UART   Heinrich Schuchardt
• [PATCH v2 1/3] efi: add EFI_SYSTEM_TABLE_POINTER for debug   Heinrich Schuchardt
• [PATCH v2 2/3] efi: add EFI_DEBUG_IMAGE_INFO_TABLE for debug   Heinrich Schuchardt
• [PATCH v2 3/3] efi: add EFI_DEBUG_IMAGE_INFO for debug   Heinrich Schuchardt
• [PATCH v4 5/8] doc: add DeepComputing FML13V01 documentation   Heinrich Schuchardt
• Pull request efi-2025-07-rc1-3   Heinrich Schuchardt
• [PATCH v2 2/3] efi: add EFI_DEBUG_IMAGE_INFO_TABLE for debug   Heinrich Schuchardt
• Re: [PATCH 1/2] Makefile: Strip leading spaces when preprocessing generated_defconfig   Heinrich Schuchardt
• [PATCH v2 1/1] Dockerfile: use QEMU 10.0.0   Heinrich Schuchardt
• [RFC 1/1] efi_loader: add dbginfodump.efi   Heinrich Schuchardt
• [PATCH 3/3] efi: add EFI_DEBUG_IMAGE_INFO for debug   Heinrich Schuchardt
• [PATCH 3/3] efi: add EFI_DEBUG_IMAGE_INFO for debug   Heinrich Schuchardt
• [PATCH v2 1/2] efi_loader: bootbin: do not load an initrd if none is provided   Heinrich Schuchardt
• [PATCH v2 2/2] efi_loader: fix typo initd_sz to initrd_sz   Heinrich Schuchardt
• [PATCH v2 1/1] efi_loader: add dbginfodump.efi   Heinrich Schuchardt
• [PATCH v3 1/2] efi_loader: bootbin: do not load an initrd if none is provided   Heinrich Schuchardt
• [PATCH 1/1] boot/image-fit: improve 'No Image' message   Heinrich Schuchardt
• [PATCH 1/1] boot: let BOOTSTAGE_RECORD_COUNT default to 50   Heinrich Schuchardt
• [PATCH 1/1] boot: let BOOTSTAGE_RECORD_COUNT default to 50   Heinrich Schuchardt
• [PATCH 1/1] boot: print the boot stage id in the report   Heinrich Schuchardt
• [PATCH 1/1] bootm: pass kernel load address not entry point for IH_OS_EFI   Heinrich Schuchardt
• [PATCH v3 1/2] efi_loader: bootbin: do not load an initrd if none is provided   Heinrich Schuchardt
• [PATCH] uthread: doc: fix inline documentation   Heinrich Schuchardt
• [PATCH v3 1/2] efi_loader: bootbin: do not load an initrd if none is provided   Heinrich Schuchardt
• [PATCH 1/1] bootm: pass kernel load address not entry point for IH_OS_EFI   Heinrich Schuchardt
• [PATCH 1/1] boot: print the boot stage id in the report   Heinrich Schuchardt
• [PATCH 1/1] boot/image-fit: improve 'No Image' message   Heinrich Schuchardt
• [PATCH 1/1] bootm: pass kernel load address not entry point for IH_OS_EFI   Heinrich Schuchardt
• Fwd: New Defects reported by Coverity Scan for Das U-Boot   Heinrich Schuchardt
• [PATCH] mach-k3: common_fdt: Fix Label Issue   Daniel Schultz
• [PATCH] mach-k3: common_fdt: Fix Label Issue   Daniel Schultz
• [PATCH v2] mach-k3: common_fdt: Move carveout struct   Daniel Schultz
• [PATCH v3] mach-k3: common_fdt: Move carveout struct   Daniel Schultz
• [PATCH] mach-k3: common_fdt: Fix Label Issue   Daniel Schultz
• [PATCH 1/3] include: env: phytec: k3_net: Remove net_apply_extensions   Daniel Schultz
• [PATCH 2/3] include: env: phytec: k3_net: Use get_cmd   Daniel Schultz
• [PATCH 3/3] board: phytec: phycore_am62ax: Update Environment   Daniel Schultz
• [PATCH] configs: phycore_am62x_a53_defconfig: Remove CONFIG_SYS_BOOTM_LEN   Daniel Schultz
• [PATCH 3/3] board: phytec: phycore_am62ax: Update Environment   Daniel Schultz
• [PATCH] doc: build: docker: Fix code-block formatting   Quentin Schulz
• [PATCH v2 1/2] doc: build: docker: Fix code highlighting syntax   Quentin Schulz
• [PATCH v2 2/2] doc: build: docker: Use code-block for syntax highlighting   Quentin Schulz
• [RFC] Upstreaming Orange Pi RV2 vendor patches - Seeking guidance   Quentin Schulz
• [PATCH] log: Add helpers for calling log_msg_ret() et al   Quentin Schulz
• [PATCH] doc: release_cycle: Use variable substitution for next version   Quentin Schulz
• [PATCH v4 01/10] rockchip: binman: Correct the OS prop for U-Boot   Quentin Schulz
• [PATCH v4 02/10] rockchip: binman: Factor out arch and compression   Quentin Schulz
• [PATCH v4 03/10] rockchip: binman: Add an fdtmap   Quentin Schulz
• [PATCH v4 04/10] rockchip: binman: Create a template for the FIT   Quentin Schulz
• [PATCH v4 05/10] rockchip: binman: Un-indent the FIT template   Quentin Schulz
• [PATCH v4 06/10] rockchip: binman: Use the FIT template in the SPI image   Quentin Schulz
• [PATCH v4 07/10] rockchip: binman: Include a compatible string in each configuration   Quentin Schulz
• [PATCH v4 08/10] rockchip: binman: Use the skip-at-start prop in simple-bin image   Quentin Schulz
• [PATCH v4 09/10] rockchip: binman: Support use of crc32 for SPL_FIT_SIGNATURE   Quentin Schulz
• [PATCH v4 10/10] rockchip: Add SPL_PAD_TO Kconfig default value   Quentin Schulz
• [PATCH 3/3] rockchip: avoid rebuilding most binaries for u-boot-rockchip-spi.bin   Quentin Schulz
• [PATCH v4 02/10] rockchip: binman: Factor out arch and compression   Quentin Schulz
• [PATCH v4 08/10] rockchip: binman: Use the skip-at-start prop in simple-bin image   Quentin Schulz
• [PATCH v4 08/10] rockchip: binman: Use the skip-at-start prop in simple-bin image   Quentin Schulz
• [PATCH RFC 0/4] fit: print conf node compatibles + use property string constants   Quentin Schulz
• [PATCH RFC 1/4] boot/fit: use constants for property strings   Quentin Schulz
• [PATCH RFC 2/4] lib: rsa: use FIT_ALGO_PROP constant instead of "algo" in FIT   Quentin Schulz
• [PATCH RFC 3/4] boot/fit: declare (and use) new constant for conf's compatible prop   Quentin Schulz
• [PATCH RFC 4/4] boot/fit: print all configuration node compatibles   Quentin Schulz
• [PATCH v4 07/10] rockchip: binman: Include a compatible string in each configuration   Quentin Schulz
• [PATCH v4 09/10] rockchip: binman: Support use of crc32 for SPL_FIT_SIGNATURE   Quentin Schulz
• [PATCH v4 09/10] rockchip: binman: Support use of crc32 for SPL_FIT_SIGNATURE   Quentin Schulz
• [PATCH v5 1/7] rockchip: binman: Correct the OS prop for U-Boot   Quentin Schulz
• [PATCH v5 7/7] rockchip: binman: Support use of crc32 hash for FIT images   Quentin Schulz
• [PATCH RFC] fit: allow to specify RSAPSS padding salt length magic value   Quentin Schulz
• [PATCH 0/2] binman: properly error out if path provided to key-name-hint in signature nodes   Quentin Schulz
• [PATCH 1/2] tools: binman: etype: fit: raise ValueError if key-name-hint is a path   Quentin Schulz
• [PATCH 2/2] binman: etype: u_boot_spl_pubkey_dtb: provide more explicit error for key-name-hint with path   Quentin Schulz
• [PATCH] cmd: Remove CMD_NET protection   Quentin Schulz
• [PATCH v4 08/10] rockchip: binman: Use the skip-at-start prop in simple-bin image   Quentin Schulz
• [PATCH v2] tools/make_pip: Use venv when invoking pip   Quentin Schulz
• [PATCH v2] tools/make_pip: Use venv when invoking pip   Quentin Schulz
• [PATCH v2] tools/make_pip: Use venv when invoking pip   Quentin Schulz
• [PATCH v2 0/2] binman: properly error out if path provided to key-name-hint in signature nodes   Quentin Schulz
• [PATCH v2 1/2] binman: etype: fit: raise ValueError if key-name-hint is a path   Quentin Schulz
• [PATCH v2 2/2] binman: etype: u_boot_spl_pubkey_dtb: provide more explicit error for key-name-hint with path   Quentin Schulz
• [PATCH v2 1/3] buildman: allow specifying configuration fragments   Quentin Schulz
• [PATCH v2 2/3] sunxi: add "fake" FEL pin support   Quentin Schulz
• [PATCH] clk: fixed-rate: Use "clock-output-names" to name fixed clocks   Quentin Schulz
• [PATCH] scripts: Fix potential null-deref   Quentin Schulz
• [PATCH] tools: Fix memory and descriptor leak   Quentin Schulz
• [PATCH] tools: Fix potential memory leak in aisimage.c   Quentin Schulz
• [PATCH] tools: image-host: Fix potential memory leak   Quentin Schulz
• [PATCH] tools: image-host: Fix potential memory leak   Quentin Schulz
• [PATCH v2 1/3] buildman: allow specifying configuration fragments   Quentin Schulz
• [PATCH v2 1/3] buildman: allow specifying configuration fragments   Quentin Schulz
• [PATCH v2 2/2] binman: etype: u_boot_spl_pubkey_dtb: provide more explicit error for key-name-hint with path   Quentin Schulz
• [PATCH] doc: remove duplicated "commands"   Quentin Schulz
• [PATCH v2 2/3] sunxi: add "fake" FEL pin support   Quentin Schulz
• [PATCH v2 2/3] sunxi: add "fake" FEL pin support   Quentin Schulz
• Wiznet w5500 support   Quentin Schulz
• Wiznet w5500 support   Quentin Schulz
• [PATCH v2 2/2] binman: etype: u_boot_spl_pubkey_dtb: provide more explicit error for key-name-hint with path   Quentin Schulz
• [PATCH] doc: fix typo   Quentin Schulz
• [PATCH 2/2] tools: Update the license specifiers   Quentin Schulz
• [PATCH 1/2] tools/make_pip.sh: Use debian packages instead of pip   Quentin Schulz
• [PATCH 2/2] tools: Update the license specifiers   Quentin Schulz
• [PATCH 1/2] mmc: rockchip_dw_mmc: Enable by default for all supported SoCs   Quentin Schulz
• [PATCH 2/2] mmc: rockchip_sdhci: Enable by default for all supported SoCs   Quentin Schulz
• [PATCH 1/2] mmc: rockchip_dw_mmc: Enable by default for all supported SoCs   Quentin Schulz
• [PATCH 1/2] bootstd: Add implementation for bootmeth rauc   Martin Schwan
• [PATCH 1/2] bootstd: Add implementation for bootmeth rauc   Martin Schwan
• [PATCH v1 1/3] imx8qxp: capricorn defconfig: collect common Kconfig options   Schweizer, Walter
• [PATCH 1/1] configs: add UNIT_TESTS to big-endian Malta boards   Daniel Schwierzeck
• [PATCH] mips: octeon: remove unused middle expression   Daniel Schwierzeck
• [RFC PATCH 1/2 v2] tools: binman: control.py: Propagate bootph-* properties to supernodes   Moteen Shah
• [RFC PATCH 1/2 v2] tools: binman: control.py: Propagate bootph-* properties to supernodes   Moteen Shah
• [RFC PATCH 1/2 v2] tools: binman: control.py: Propagate bootph-* properties to supernodes   Moteen Shah
• [RFC PATCH 1/2 v2] tools: binman: control.py: Propagate bootph-* properties to supernodes   Moteen Shah
• [RFC PATCH 1/2 v2] tools: binman: control.py: Propagate bootph-* properties to supernodes   Moteen Shah
• [PATCH 3/3] wip: binman: Move processing after templates   Moteen Shah
• [PATCH v1 0/2] jh7110: starfive: visionfive2 drop setting of $fdtfile   E Shattow
• [PATCH v1 1/2] doc: board: starfive: Drop setting of $fdtfile   E Shattow
• [PATCH v1 2/2] board: starfive: visionfive2: Drop setting of $fdtfile   E Shattow
• [PATCH v1] board: starfive: visionfive2: Order board detection logic to match config   E Shattow
• [PATCH v1 2/2] board: starfive: visionfive2: Drop setting of $fdtfile   E Shattow
• [PATCH v1 2/2] board: starfive: visionfive2: Drop setting of $fdtfile   E Shattow
• RISC-V (and others?) UART0 clock rate from OF_UPSTREAM   E Shattow
• [PATCH] doc: board: starfive: visionfive2: add missing format command to Flashing   E Shattow
• [PATCH v4 1/8] configs: add jh7110-deepcomputing-fml13v01 to VF2 defconfig   E Shattow
• [PATCH v4 2/8] riscv: dts: jh7110: add DeepComputing FML13V01 device-tree   E Shattow
• [PATCH v4 3/8] board: starfive: DeepComputing FML13V01 fdt selection   E Shattow
• [PATCH v4 4/8] board: starfive: spl: support DeepComputing FML13V01   E Shattow
• [PATCH v4 5/8] doc: add DeepComputing FML13V01 documentation   E Shattow
• [PATCH v4 6/8] doc: starfive: use consistent formatting   E Shattow
• [PATCH v4 7/8] doc: starfive: use jh7110_common.rst   E Shattow
• [PATCH v4 8/8] doc: jh7110: describe debug UART   E Shattow
• [GIT PULL] u-boot-riscv/master   E Shattow
• [GIT PULL] u-boot-riscv/master   E Shattow
• [GIT PULL] u-boot-riscv/master   E Shattow
• [PATCH v2] board: starfive: visionfive2: Order board detection logic to match config   E Shattow
• [GIT PULL] u-boot-riscv/master   E Shattow
• RISC-V (and others?) UART0 clock rate from OF_UPSTREAM   E Shattow
• [PATCH] IOMUX: Fix stopping unused dropped consoles   Andy Shevchenko
• [PATCH] power: qcom_vbus_regulator: add and fix support for pmic variants   Rui Miguel Silva
• [PATCH v1 3/3] configs: qcs9100: Enable env in UFS   Michal Simek
• [PATCH v2] arm64: zynqmp: Use CONFIG_SPL_FS_LOAD_PAYLOAD_NAME in binman   Michal Simek
• [U-Boot][PATCH v1] cmd/fpga: use config node for loadmk   Michal Simek
• [PATCH v1 0/2] Add FPGA configuration when booting Linux   Michal Simek
• [PATCH 0/3] loadpdi related code changes.   Michal Simek
• [PATCH v2] cmd: fwu: Dump custom fields from mdata structure   Michal Simek
• [PATCH] configs: versal: Fix initial stack pointer   Michal Simek
• [PATCH v4 0/3] EFI Capsule update explicitly sets dfu_alt_info   Michal Simek
• [PATCH] amd: versal2: Enable SMBIOS command   Michal Simek
• [PATCH] amd: versal2: Enable NVMEM framework   Michal Simek
• [PATCH] xilinx: Remove UARTLITE from defconfigs   Michal Simek
• [PATCH] xilinx: Free memory when variable is saved in boot_targets_setup()   Michal Simek
• [PATCH v2] cmd: fwu: Dump custom fields from mdata structure   Michal Simek
• [PATCH] arm64: zynqmp: Start usb automatically via preboot on Kria   Michal Simek
• [PATCH] usb: onboard-hub: Fix return type for regulator APIs   Michal Simek
• [PATCH] xilinx: versal-net: Enable loading bitstreams via fpga   Michal Simek
• [PATCH] gpio: zynq: Read using DATA register when direction is output   Michal Simek
• [PATCH 0/2] arm64: versal2: Enable boot from UFS and USB   Michal Simek
• [PATCH 1/2] arm64: versal2: Add ufs distro boot command   Michal Simek
• [PATCH 2/2] arm64: versal2: Add usb distro boot command   Michal Simek
• [PATCH v2] usb: onboard-hub: Fix return type for regulator APIs   Michal Simek
• [PATCH] cmd: Remove CMD_NET protection   Michal Simek
• [PATCH 3/5] arm64: versal: fix dfu alt buffer clearing   Michal Simek
• [PATCH 4/5] xilinx: zynq: fix dfu alt buffer clearing   Michal Simek
• [PATCH 5/5] arm64: zynqmp: fix dfu alt buffer clearing   Michal Simek
• [PATCH v4 4/4] board/BuR/zynq: initial commit   Michal Simek
• [PATCH v2] arm64: zynqmp: Use CONFIG_SPL_FS_LOAD_PAYLOAD_NAME in binman   Michal Simek
• [PATCH] amd: versal2: Enable SMBIOS command   Michal Simek
• [PATCH] amd: versal2: Enable NVMEM framework   Michal Simek
• [PATCH] xilinx: Remove UARTLITE from defconfigs   Michal Simek
• [PATCH] xilinx: Free memory when variable is saved in boot_targets_setup()   Michal Simek
• [PATCH] arm64: zynqmp: Start usb automatically via preboot on Kria   Michal Simek
• [PATCH] xilinx: versal-net: Enable loading bitstreams via fpga   Michal Simek
• [PATCH 0/2] arm64: versal2: Enable boot from UFS and USB   Michal Simek
• [PATCH] arm64: versal2: Update the number of DRAM banks to 36   Michal Simek
• [PATCH] amd: versal2: Add support for saving env based on bootmode   Michal Simek
• [PATCH] board: xilinx: Store board info data in data section   Michal Simek
• [PATCH 0/2] arm64: versal2: Read an eeprom   Michal Simek
• [PATCH v4 0/4] Add support for BR Xilinx Zynq boards in mainline U-Boot.   Michal Simek
• [GIT PULL] AMD/Xilinx changes   Michal Simek
• [PATCH] Dockerfile: Simplify applying cadence_gem commit to QEMU   Michal Simek
• [PATCH] Dockerfile: Simplify applying cadence_gem commit to QEMU   Michal Simek
• [PATCH 0/5] sunxi: h6/h616: consolidate DRAM code   Jernej Skrabec
• [PATCH 1/5] sunxi: h616: Panic if DRAM size is not detected   Jernej Skrabec
• [PATCH 2/5] sunxi: H6: Remove useless DRAM timings parameter   Jernej Skrabec
• [PATCH 3/5] sunxi: H6: DRAM: Constify function parameters   Jernej Skrabec
• [PATCH 4/5] sunxi: h6: dram: split dram_para struct   Jernej Skrabec
• [PATCH 5/5] sunxi: h6/h616: Reuse common DRAM infrastructure   Jernej Skrabec
• [PATCH v1 0/3] Add support for Toradex SMARC i.MX8MP   Vitor Soares
• [PATCH v1 1/3] arm: dts: imx8mp: sync with Linux v6.15-rc1   Vitor Soares
• [PATCH v1 2/3] toradex: tdx-cfg-block: add 0096 Toradex SMARC iMX95   Vitor Soares
• [PATCH v1 3/3] board: toradex: add Toradex SMARC iMX8MP   Vitor Soares
• SMBIOS tables missing on 2025.04-rc5 on qemu-x86   Niklas Sombert
• [PATCH] x86: efi_loader: Ensure the SMBIOS tables are sent via EFI   Niklas Sombert
• [PATCH] x86: efi_loader: Ensure the SMBIOS tables are sent via EFI   Niklas Sombert
• [PATCH v4 5/8] doc: add DeepComputing FML13V01 documentation   Maud Spierings
• Gitlab runner timeout on evb-ast2600 ?   Joel Stanley
• Gitlab runner timeout on evb-ast2600 ?   Joel Stanley
• [PATCH] Revert "CI: Disable evb-ast2600"   Joel Stanley
• [PATCH] efi_loader: handle malloc() errors   Vincent Stehlé
• [PATCH] cmd: optee: fix hello subcommand argument check   Vincent Stehlé
• [PATCH 0/5] fix dfu alt buffer clearing   Vincent Stehlé
• [PATCH 1/5] fwu: developerbox: fix dfu alt buffer clearing   Vincent Stehlé
• [PATCH 2/5] board: st: common: fix dfu alt buffer clearing   Vincent Stehlé
• [PATCH 3/5] arm64: versal: fix dfu alt buffer clearing   Vincent Stehlé
• [PATCH 4/5] xilinx: zynq: fix dfu alt buffer clearing   Vincent Stehlé
• [PATCH 5/5] arm64: zynqmp: fix dfu alt buffer clearing   Vincent Stehlé
• [REGRESSION] [PATCH 1/1] mtd: mtdpart: Support MTD_SIZE_REMAINING with unallocated memory area   Alexander Stein
• [PATCH] Revert "net: eth_bootdev_hunt() should not run DHCP"   Heiko Stuebner
• [PATCH] configs: rockchip: sync ENV_MEM_LAYOUT_SETTINGS for px30 to rk3308/etc   Heiko Stuebner
• [PATCH] boot: call dhcp_run in pxe bootmethod   Heiko Stuebner
• [PATCH v2 00/16] Support for the RK3576   Heiko Stuebner
• [PATCH v2 01/16] rockchip: sdram: honor CFG_SYS_SDRAM_BASE when defining ram regions   Heiko Stuebner
• [PATCH v2 02/16] rockchip: mkimage: Add rk3576 support   Heiko Stuebner
• [PATCH v2 03/16] arm: rockchip: add RK3576-specific syscon ids   Heiko Stuebner
• [PATCH v2 04/16] arm: rockchip: Add RK3576 arch core support   Heiko Stuebner
• [PATCH v2 05/16] pinctrl: rockchip: support rk3576 pinctrl   Heiko Stuebner
• [PATCH v2 06/16] clk: rockchip: Add rk3576 clk support   Heiko Stuebner
• [PATCH v2 07/16] reset: rockchip: implement rk3576 lookup table   Heiko Stuebner
• [PATCH v2 08/16] ram: rockchip: Add rk3576 ddr driver support   Heiko Stuebner
• [PATCH v2 09/16] rockchip: otp: Add support for RK3576   Heiko Stuebner
• [PATCH v2 10/16] mmc: rockchip_sdhci: Add support for RK3576   Heiko Stuebner
• [PATCH v2 11/16] mmc: rockchip_dw_mmc: Add support for rk3576   Heiko Stuebner
• [PATCH v2 12/16] net: dwc_eth_qos_rockchip: Add support for RK3576   Heiko Stuebner
• [PATCH v2 13/16] arm64: dts: rockchip: add rk3576 otp node   Heiko Stuebner
• [PATCH v2 14/16] dt-bindings: arm: rockchip: Add Firefly ROC-RK3576-PC binding   Heiko Stuebner
• [PATCH v2 15/16] arm64: dts: rockchip: Add devicetree for the ROC-RK3576-PC   Heiko Stuebner
• [PATCH v2 16/16] rockchip: rk3576: Add support for ROC-RK3576-PC board   Heiko Stuebner
• [PATCH v3 00/15] Support for the RK3576   Heiko Stuebner
• [PATCH v3 01/15] rockchip: sdram: honor CFG_SYS_SDRAM_BASE when defining ram regions   Heiko Stuebner
• [PATCH v3 02/15] rockchip: mkimage: Add rk3576 support   Heiko Stuebner
• [PATCH v3 03/15] arm: rockchip: Add RK3576 arch core support   Heiko Stuebner
• [PATCH v3 04/15] pinctrl: rockchip: support rk3576 pinctrl   Heiko Stuebner
• [PATCH v3 05/15] clk: rockchip: Add rk3576 clk support   Heiko Stuebner
• [PATCH v3 06/15] reset: rockchip: implement rk3576 lookup table   Heiko Stuebner
• [PATCH v3 07/15] ram: rockchip: Add rk3576 ddr driver support   Heiko Stuebner
• [PATCH v3 08/15] rockchip: otp: Add support for RK3576   Heiko Stuebner
• [PATCH v3 09/15] mmc: rockchip_sdhci: Add support for RK3576   Heiko Stuebner
• [PATCH v3 10/15] mmc: rockchip_dw_mmc: Add support for rk3576   Heiko Stuebner
• [PATCH v3 11/15] net: dwc_eth_qos_rockchip: Add support for RK3576   Heiko Stuebner
• [PATCH v3 12/15] arm64: dts: rockchip: add rk3576 otp node   Heiko Stuebner
• [PATCH v3 13/15] dt-bindings: arm: rockchip: Add Firefly ROC-RK3576-PC binding   Heiko Stuebner
• [PATCH v3 14/15] arm64: dts: rockchip: Add devicetree for the ROC-RK3576-PC   Heiko Stuebner
• [PATCH v3 15/15] rockchip: rk3576: Add support for ROC-RK3576-PC board   Heiko Stuebner
• [PATCH] Revert "net: eth_bootdev_hunt() should not run DHCP"   Heiko Stübner
• [PATCH] Revert "net: eth_bootdev_hunt() should not run DHCP"   Heiko Stübner
• [PATCH 00/20] Support for the RK3576   Heiko Stübner
• [PATCH] mmc: cv1800b: Fix build without MMC_SUPPORTS_TUNING   Alexander Sverdlin
• [PATCH] common: Add CONFIG_SKIP_RELOCATE   Jesse Taube
• [PATCH v2] common: Add CONFIG_SKIP_RELOCATE   Jesse Taube
• bootflow: extlinux and menu   Heiko Thiery
• bootflow: extlinux and menu   Heiko Thiery
• bootflow: extlinux and menu   Heiko Thiery
• [PATCH] net: fsl_enetc: fix imdio register calculation   Heiko Thiery
• bootflow: extlinux and menu   Heiko Thiery
• CM5 with random delays on boot   Tholag
• Flashing Kernel + Bootloader to eMMC with Rollback Support Using Boot0/Boot1 (i.MX93 + U-Boot)   Daniel Thungren
• [PATCH] mtdpart: Support MTDPART_SIZ_FULL in fixed-partitions   Michael Nazzareno Trimarchi
• [RESEND PATCH] clk: fix crash on clk_set_rate clean rate cache   Michael Nazzareno Trimarchi
• [RESEND PATCH] clk: fix crash on clk_set_rate clean rate cache   Michael Nazzareno Trimarchi
• [PATCH v2] mtd: mtdpart: Support MTDPART_SIZ_FULL in fixed-partitions   Michael Nazzareno Trimarchi
• [PATCH] rockchip: io-domain: Enable by default for all supported SoCs   Chen-Yu Tsai
• [PATCH v2] rockchip: io-domain: Enable by default for all supported SoCs   Chen-Yu Tsai
• [PATCH 1/2] mmc: rockchip_dw_mmc: Enable by default for all supported SoCs   Chen-Yu Tsai
• [PATCH 2/2] mmc: rockchip_sdhci: Enable by default for all supported SoCs   Chen-Yu Tsai
• [PATCH 1/2] mmc: rockchip_dw_mmc: Enable by default for all supported SoCs   Chen-Yu Tsai
• [PATCH 1/2] mmc: rockchip_dw_mmc: Enable by default for all supported SoCs   Chen-Yu Tsai
• [PATCH 2/2] mmc: rockchip_sdhci: Enable by default for all supported SoCs   Chen-Yu Tsai
• [PATCH 1/2] mmc: rockchip_dw_mmc: Enable by default for all supported SoCs   Chen-Yu Tsai
• RISC-V UEFI/ACPI on QEMU regression?   Björn Töpel
• RISC-V UEFI/ACPI on QEMU regression?   Björn Töpel
• [PATCH] acpi: Fix table length for QEMU   Björn Töpel
• [PATCH] net: ti: am65-cpsw-nuss: invoke phy_config() in driver's .start callback   Siddharth Vadapalli
• [PATCH 1/3] pci: pcie_cdns_ti: Include linux/sizes.h header   Siddharth Vadapalli
• [PATCH 2/3] pci: pcie_cdns_ti: Enable PCIe root-complex mode in AM64 SoC   Siddharth Vadapalli
• [PATCH 3/3] configs: am64x_evm_a53_defconfig: Enable configs for PCIe support   Siddharth Vadapalli
• [PATCH] firmware: scmi: smt: Interrupt communication enable   Marek Vasut
• Re: 回复: [PATCH v8 02/19] pinctrl: nxp: add a pin controller driver based on SCMI pin control protocol   Marek Vasut
• [PATCH 1/1] net: phy: Add the Airoha EN8811H PHY driver   Marek Vasut
• [PATCH] usb: dwc3: gadget: Fix match_ep callback for NXP UUU tool   Marek Vasut
• Re: 回复: [EXT] [PATCH] power: regulator: scmi: Move regulator subnode hack to scmi_regulator   Marek Vasut
• [PATCH v1] MAINTAINERS: Add USB driver file to visionfive2 maintain files.   Marek Vasut
• [PATCH v2] MAINTAINERS: visionfive2: Add match N: starfive pattern   Marek Vasut
• [PATCH] usb: onboard-hub: Fix return type for regulator APIs   Marek Vasut
• [PATCH] net: usb: r8152: add device id of Linksys USB3GIGV1   Marek Vasut
• [PATCH v6 2/3] common: board: make initcalls static   Marek Vasut
• [PATCH v2] usb: onboard-hub: Fix return type for regulator APIs   Marek Vasut
• [PATCH] net: dwc_eth_qos: add support of stm32mp2 platform   Marek Vasut
• [PATCH 1/7] fs: exfat: Flush node before put in read() callback   Marek Vasut
• [PATCH 2/7] fs: exfat: Inhibit "impossible" print on write to bogus file   Marek Vasut
• [PATCH 3/7] fs: exfat: Rework exfat_fs_readdir() to behave like exfat_fs_ls()   Marek Vasut
• [PATCH 4/7] fs: exfat: Fix exfat_fs_exists() return value   Marek Vasut
• [PATCH 5/7] test_fs: Add test -e test   Marek Vasut
• [PATCH 6/7] fs: exfat: Implement trivial 'rename' support   Marek Vasut
• [PATCH 7/7] test_fs: Test 'mv' command on exfat and fs_generic   Marek Vasut
• [PATCH] usb: dwc3: gadget: Fix match_ep callback for NXP UUU tool   Marek Vasut
• [PATCH] ARM: renesas: Enable serial RX buffer on Renesas R-Car   Marek Vasut
• [PATCH] net: ravb: Fix RX error handling   Marek Vasut
• [REGRESSION] Re: [PATCH v2 16/24] clk: imx: Convert clock-osc-* back to osc_*   Marek Vasut
• [REGRESSION] Re: [PATCH v2 16/24] clk: imx: Convert clock-osc-* back to osc_*   Marek Vasut
• [REGRESSION] Re: [PATCH v2 16/24] clk: imx: Convert clock-osc-* back to osc_*   Marek Vasut
• [REGRESSION] Re: [PATCH v2 16/24] clk: imx: Convert clock-osc-* back to osc_*   Marek Vasut
• [REGRESSION] Re: [PATCH v2 16/24] clk: imx: Convert clock-osc-* back to osc_*   Marek Vasut
• [PATCH v2] clk: fixed-rate: Use "clock-output-names" to name fixed clocks   Marek Vasut
• [PATCH v2] clk: fixed-rate: Use "clock-output-names" to name fixed clocks   Marek Vasut
• [PATCH v2] clk: fixed-rate: Use "clock-output-names" to name fixed clocks   Marek Vasut
• [PATCH v2] clk: fixed-rate: Use "clock-output-names" to name fixed clocks   Marek Vasut
• [PATCH v2] net: ravb: Fix RX error handling   Marek Vasut
• [PATCH] net: ravb: Fix RX error handling   Marek Vasut
• [PATCH 1/1] net: phy: Add the Airoha EN8811H PHY driver   Marek Vasut
• [PATCH v2] clk: fixed-rate: Use "clock-output-names" to name fixed clocks   Marek Vasut
• [PATCH v2] clk: fixed-rate: Use "clock-output-names" to name fixed clocks   Marek Vasut
• [PATCH 4/4] arm64: dts: imx8mm: Allow osc_24m to be available in SPL   Marek Vasut
• [PATCH 3/4] Revert "arm64: dts: imx8mn: Include 32kHz oscillator clock in SPL DTs"   Marek Vasut
• [PATCH 2/4] arm64: dts: imx8mn: Remove unreferenced clock-controller clocks in SPL DTs   Marek Vasut
• [PATCH v2] clk: fixed-rate: Use "clock-output-names" to name fixed clocks   Marek Vasut
• [PATCH v2] clk: fixed-rate: Use "clock-output-names" to name fixed clocks   Marek Vasut
• [PATCH] clk: imx: Pass CCM udevice into clk_register_composite()   Marek Vasut
• [PATCH V2] tiny-printf: Handle formatting of %p with an extra Kconfig   Marek Vasut
• [PATCH 1/2] fs: exfat: Use strncpy() and bail on too long filenames   Marek Vasut
• [PATCH 2/2] fs: exfat: Inhibit unused exfat_humanize_bytes() and exfat_print_info()   Marek Vasut
• Fwd: New Defects reported by Coverity Scan for Das U-Boot   Marek Vasut
• Wiznet w5500 support   Verdun, Jean-Marie
• Wiznet w5500 support   Verdun, Jean-Marie
• Wiznet w5500 support   Verdun, Jean-Marie
• [PATCH v1 1/1] Initial support for Wiznet W5500   Verdun, Jean-Marie
• [PATCH] mtd: ubi: Put MTD device after it is not used   Alexander Vickberg
• [PATCH] tiny-printf: Add support for upper case hex values   Michael Walle
• [PATCH] tiny-printf: Add support for upper case hex values   Michael Walle
• [PATCH] tiny-printf: Add support for upper case hex values   Michael Walle
• [PATCH] tiny-printf: Add support for upper case hex values   Michael Walle
• [PATCH] tiny-printf: Handle formatting of %p with an extra Kconfig   Michael Walle
• [PATCH] tiny-printf: Handle formatting of %p with an extra Kconfig   Michael Walle
• [PATCH] doc: board: ti: Add optee rng support   Michael Walle
• [PATCH] doc: board: ti: Add optee rng support   Michael Walle
• [PATCH] net: fsl_enetc: fix imdio register calculation   Michael Walle
• [PATCH v2 00/13] Enable OF_UPSTREAM for STM32 and STi platforms   Linus Walleij
• [PATCH v10 13/21] spl: imx: use trampoline buffer to load images to secure region   Lothar Waßmann
• [PATCH] Add HOST_ARCH detection for armv5tel and armv6l   Ben Wolsieffer
• [PATCH v3] watchdog: qcom: introduce qcom-wdt driver   Yang Xiwen
• [PATCH] rockchip: io-domain: Enable by default for all supported SoCs   Kever Yang
• [PATCH 1/2] rng: rockchip_rng: Add compatible for RK3568   Kever Yang
• [PATCH 00/20] Support for the RK3576   Kever Yang
• [PATCH next 1/3] rockchip: px30: enable RNG for all boards   Kever Yang
• [PATCH next 2/3] rockchip: px30: add fdtoverlay_addr_r default value to support FDTO   Kever Yang
• [PATCH next 3/3] rockchip: ringneck-px30: enable DT overlay support   Kever Yang
• [PATCH] configs: rockchip: sync ENV_MEM_LAYOUT_SETTINGS for px30 to rk3308/etc   Kever Yang
• [PATCH v2 1/2] board: rockchip: Add minimal generic RK3328 board   Kever Yang
• [PATCH v2 2/2] board: rockchip: Add minimal generic RK3399 board   Kever Yang
• [PATCH] board: rockchip: Add LCKFB TaishanPi RK3566 Board   Kever Yang
• [PATCH v4 01/10] rockchip: binman: Correct the OS prop for U-Boot   Kever Yang
• [PATCH v4 02/10] rockchip: binman: Factor out arch and compression   Kever Yang
• [PATCH v4 03/10] rockchip: binman: Add an fdtmap   Kever Yang
• [PATCH v4 04/10] rockchip: binman: Create a template for the FIT   Kever Yang
• [PATCH v4 05/10] rockchip: binman: Un-indent the FIT template   Kever Yang
• [PATCH v4 06/10] rockchip: binman: Use the FIT template in the SPI image   Kever Yang
• [PATCH v4 07/10] rockchip: binman: Include a compatible string in each configuration   Kever Yang
• [PATCH v4 08/10] rockchip: binman: Use the skip-at-start prop in simple-bin image   Kever Yang
• [PATCH v4 09/10] rockchip: binman: Support use of crc32 for SPL_FIT_SIGNATURE   Kever Yang
• [PATCH v4 10/10] rockchip: Add SPL_PAD_TO Kconfig default value   Kever Yang
• [PATCH] rockchip: io-domain: Enable by default for all supported SoCs   Kever Yang
• [PATCH v2 1/6] rockchip: Move imply TPL_ROCKCHIP_COMMON_BOARD under SoC Kconfig symbol   Kever Yang
• [PATCH v2 2/6] rockchip: Make ROCKCHIP_COMMON_STACK_ADDR depend on TPL   Kever Yang
• [PATCH v2 3/6] rockchip: Improve ARMv7 support for ROCKCHIP_COMMON_STACK_ADDR   Kever Yang
• [PATCH v2 4/6] rockchip: Move imply ROCKCHIP_COMMON_STACK_ADDR under SoC Kconfig symbol   Kever Yang
• [PATCH v2 5/6] rockchip: Move imply ROCKCHIP_EXTERNAL_TPL under SoC Kconfig symbol   Kever Yang
• [PATCH v2 6/6] rockchip: Add RK3576 support for ROCKCHIP_COMMON_STACK_ADDR   Kever Yang
• [PATCH v2 1/3] rockchip: rk3399: do not generate u-boot.rom anymore   Kever Yang
• [PATCH v2 2/3] rockchip: rk3288: do not generate u-boot.rom anymore   Kever Yang
• [PATCH v2 3/3] rockchip: avoid rebuilding most binaries for u-boot-rockchip-spi.bin   Kever Yang
• [PATCH 1/6] rockchip: Add DFU to boot from USB for Radxa ROCK 5B   Kever Yang
• [PATCH 2/6] rockchip: Add DFU to boot from USB for Radxa ROCK 3A   Kever Yang
• [PATCH 3/6] rockchip: Add DFU to boot from USB for Radxa ROCK 3B   Kever Yang
• [PATCH 4/6] rockchip: Add DFU to boot from USB for Radxa ZERO 3E/3W   Kever Yang
• [PATCH 5/6] rockchip: Add DFU to boot from USB for Radxa ROCK Pi E v1/v3   Kever Yang
• [PATCH 6/6] rockchip: Add DFU to boot from USB for Radxa ROCK Pi S   Kever Yang
• [PATCH 3/7] rockchip: Add DFU to SPL for RK3588   Kever Yang
• [PATCH 01/14] pinctrl: rockchip: remove unused base_pin bank member   Kever Yang
• [PATCH 02/14] pinctrl: rockchip: remove unused nr_pins controller member   Kever Yang
• [PATCH 03/14] pinctrl: rockchip: constify rockchip_pin_ctrl for PX30   Kever Yang
• [PATCH 04/14] pinctrl: rockchip: constify rockchip_pin_ctrl for RK3036   Kever Yang
• [PATCH 05/14] pinctrl: rockchip: constify rockchip_pin_ctrl for RK3066   Kever Yang
• [PATCH 06/14] pinctrl: rockchip: constify rockchip_pin_ctrl for RK3128   Kever Yang
• [PATCH 07/14] pinctrl: rockchip: constify rockchip_pin_ctrl for RK3188   Kever Yang
• [PATCH 08/14] pinctrl: rockchip: constify rockchip_pin_ctrl for RK3228   Kever Yang
• [PATCH 09/14] pinctrl: rockchip: constify rockchip_pin_ctrl for RK3288   Kever Yang
• [PATCH 10/14] pinctrl: rockchip: constify rockchip_pin_ctrl for RK3308   Kever Yang
• [PATCH 11/14] pinctrl: rockchip: constify rockchip_pin_ctrl for RK3328   Kever Yang
• [PATCH 12/14] pinctrl: rockchip: constify rockchip_pin_ctrl for RK3368   Kever Yang
• [PATCH 13/14] pinctrl: rockchip: constify rockchip_pin_ctrl for RK3399   Kever Yang
• [PATCH 14/14] pinctrl: rockchip: constify rockchip_pin_ctrl for RV1108   Kever Yang
• [PATCH 01/11] rockchip: rk3588: Use hptimer reg names in rockchip_stimer_init   Kever Yang
• [PATCH 02/11] rockchip: Remove partitions env variable for RK356x   Kever Yang
• [PATCH 03/11] rockchip: Remove partitions env variable for RK3588   Kever Yang
• [PATCH 04/11] rockchip: Ensure device settings is defined before rk3568_common.h   Kever Yang
• [PATCH 05/11] rockchip: Ensure device settings is defined before rk3588_common.h   Kever Yang
• [PATCH 06/11] rockchip: Use rk3568_common.h by default for RK356x boards   Kever Yang
• [PATCH 07/11] rockchip: Use rk3588_common.h by default for RK3588 boards   Kever Yang
• [PATCH 08/11] rockchip: rk3568: Drop BOARD_LATE_INIT from target config   Kever Yang
• [PATCH 09/11] rockchip: rk3588: Drop BOARD_LATE_INIT from target config   Kever Yang
• [PATCH 10/11] rockchip: Enable meminfo and rng commands for Generic RK3566/RK3568   Kever Yang
• [PATCH 11/11] rockchip: Enable meminfo and rng commands for Generic RK3588   Kever Yang
• [PATCH v2 01/30] dt-bindings: clock: Document clock and reset unit of RK3528   Kever Yang
• [PATCH v2 02/30] arm64: dts: rockchip: Add clock generators for RK3528 SoC   Kever Yang
• [PATCH v2 03/30] arm64: dts: rockchip: Add UART clocks for RK3528 SoC   Kever Yang
• [PATCH v2 04/30] arm64: dts: rockchip: Add pinctrl and gpio nodes for RK3528   Kever Yang
• [PATCH v2 05/30] arm64: dts: rockchip: Add rk3528 QoS register node   Kever Yang
• [PATCH v2 06/30] arm64: dts: rockchip: enable SCMI clk for RK3528 SoC   Kever Yang
• [PATCH v2 07/30] arm64: dts: rockchip: Add SARADC node for RK3528   Kever Yang
• [PATCH v2 08/30] arm64: dts: rockchip: Add SDHCI controller for RK3528   Kever Yang
• [PATCH v2 09/30] arm64: dts: rockchip: Add uart0 pinctrl to Radxa E20C   Kever Yang
• [PATCH v2 10/30] arm64: dts: rockchip: Add leds node to Radxa E20C   Kever Yang
• [PATCH v2 11/30] arm64: dts: rockchip: Add user button to Radxa E20C   Kever Yang
• [PATCH v2 12/30] arm64: dts: rockchip: Add maskrom button to Radxa E20C   Kever Yang
• [PATCH v2 13/30] arm64: dts: rockchip: Enable onboard eMMC on Radxa E20C   Kever Yang
• [PATCH v2 14/30] rockchip: mkimage: Add support for RK3528   Kever Yang
• [PATCH v2 15/30] ram: rockchip: Add basic support for RK3528   Kever Yang
• [PATCH v2 16/30] clk: rockchip: Add support for RK3528   Kever Yang
• [PATCH v2 17/30] pinctrl: rockchip: Add support for RK3528   Kever Yang
• [PATCH v2 18/30] arm: dts: rockchip: Add rk3528-u-boot.dtsi   Kever Yang
• [PATCH v2 19/30] arch: arm: rockchip: Add initial support for RK3528   Kever Yang
• [PATCH v2 20/30] mmc: rockchip_sdhci: Extend variant configuration   Kever Yang
• [PATCH v2 21/30] mmc: rockchip_sdhci: Add initial support for RK3528   Kever Yang
• [PATCH v2 22/30] mmc: rockchip_sdhci: Gate clock for glitch free phase switching   Kever Yang
• [PATCH v2 23/30] rockchip: otp: Add support for RK3528   Kever Yang
• [PATCH v2 24/30] adc: rockchip-saradc: Add support for RK3528   Kever Yang
• [PATCH v2 25/30] rng: rockchip: Add support for rkrng variant   Kever Yang
• [PATCH v2 26/30] phy: rockchip-inno-usb2: Add support for clkout_ctl_phy   Kever Yang
• [PATCH v2 27/30] phy: rockchip-inno-usb2: Add support for RK3528   Kever Yang
• [PATCH v2 28/30] net: dwc_eth_qos_rockchip: Add support for RK3528   Kever Yang
• [PATCH v2 29/30] board: rockchip: Add minimal generic RK3528 board   Kever Yang
• [PATCH v2 30/30] board: rockchip: Add Radxa E20C   Kever Yang
• [PATCH v3 01/15] rockchip: sdram: honor CFG_SYS_SDRAM_BASE when defining ram regions   Kever Yang
• [PATCH v3 02/15] rockchip: mkimage: Add rk3576 support   Kever Yang
• [PATCH v3 03/15] arm: rockchip: Add RK3576 arch core support   Kever Yang
• [PATCH v3 04/15] pinctrl: rockchip: support rk3576 pinctrl   Kever Yang
• [PATCH v3 06/15] reset: rockchip: implement rk3576 lookup table   Kever Yang
• [PATCH v3 05/15] clk: rockchip: Add rk3576 clk support   Kever Yang
• [PATCH v3 07/15] ram: rockchip: Add rk3576 ddr driver support   Kever Yang
• [PATCH v3 08/15] rockchip: otp: Add support for RK3576   Kever Yang
• [PATCH v3 09/15] mmc: rockchip_sdhci: Add support for RK3576   Kever Yang
• [PATCH v3 10/15] mmc: rockchip_dw_mmc: Add support for rk3576   Kever Yang
• [PATCH v3 11/15] net: dwc_eth_qos_rockchip: Add support for RK3576   Kever Yang
• [PATCH v3 12/15] arm64: dts: rockchip: add rk3576 otp node   Kever Yang
• [PATCH v3 13/15] dt-bindings: arm: rockchip: Add Firefly ROC-RK3576-PC binding   Kever Yang
• [PATCH v3 14/15] arm64: dts: rockchip: Add devicetree for the ROC-RK3576-PC   Kever Yang
• [PATCH v3 15/15] rockchip: rk3576: Add support for ROC-RK3576-PC board   Kever Yang
• [PATCH v3] board: rockchip: add Xunlong Orange Pi 5 Max   Kever Yang
• [PATCH v2 1/4] rng: rockchip_rng: Add compatible for RK3568   Kever Yang
• [PATCH v2 2/4] rockchip: rk356x: Remove rng node from u-boot.dtsi   Kever Yang
• [PATCH v2 3/4] arm64: dts: rockchip: Add rng node to RK3588   Kever Yang
• [PATCH v2 4/4] rng: rockchip_rng: Update compatible for RK3588   Kever Yang
• Pull request: u-boot-rockchip-20250422   Kever Yang
• Pull request: u-boot-rockchip-20250422   Kever Yang
• Pull request: u-boot-rockchip-20250423   Kever Yang
• [PATCH v2 1/3] riscv: image: Add new image type for RV64   Yao Zi
• [PATCH 0/2] Fix binman_sym functionality on RISC-V port   Yao Zi
• [PATCH 1/2] spl: riscv: Disable SPL_BINMAN_UBOOT_SYMBOLS by default   Yao Zi
• [PATCH 2/2] riscv: Provide __image_copy_{start_end} symbols in linkerscript   Yao Zi
• [PATCH 2/2] riscv: Provide __image_copy_{start_end} symbols in linkerscript   Yao Zi
• [PATCH 1/2] spl: riscv: Disable SPL_BINMAN_UBOOT_SYMBOLS by default   Yao Zi
• [PATCH 1/2] spl: riscv: Disable SPL_BINMAN_UBOOT_SYMBOLS by default   Yao Zi
• [PATCH v2 0/3] Fix binman_sym functionality on RISC-V port   Yao Zi
• [PATCH v2 1/3] riscv: dts: binman.dtsi: Switch to u-boot-nodtb entry for proper U-Boot   Yao Zi
• [PATCH v2 2/3] riscv: dts: starfive: Prevent binman from relocating symbols in SPL   Yao Zi
• [PATCH v2 3/3] riscv: Provide __image_copy_{start_end} symbols in linkerscript   Yao Zi
• [PATCH v2 1/3] riscv: dts: binman.dtsi: Switch to u-boot-nodtb entry for proper U-Boot   Yao Zi
• [PATCH] tools: Fix handle leak in mmap_fdt function   Yao Zi
• [PATCH 1/1] riscv: dts: jh7110: add bootph-pre-ram for &pllclk   Yao Zi
• [GIT PULL] u-boot-riscv/master   Yao Zi
• Build for RISC-V with LLVM   Yao Zi
• [PATCH 00/10] Initial SPL support for T-Head TH1520 SoC   Yao Zi
• [PATCH 01/10] riscv: lib: Split out support for T-Head cache management operations   Yao Zi
• [PATCH 02/10] riscv: dts: th1520: Add clock-frequency for UART0   Yao Zi
• [PATCH 03/10] riscv: cpu: Add TH1520 CPU support   Yao Zi
• [PATCH 04/10] ram: thead: Add initial DDR controller support for TH1520   Yao Zi
• [PATCH 04/10] ram: thead: Add initial DDR controller support for TH1520   Yao Zi
• [PATCH 05/10] riscv: dts: th1520: Preserve necessary devices for SPL   Yao Zi
• [PATCH 06/10] riscv: dts: lichee-module-4a: Preserve memory node for SPL   Yao Zi
• [PATCH 07/10] riscv: dts: th1520: Add DRAM controller   Yao Zi
• [PATCH 08/10] riscv: dts: th1520: Add binman configuration   Yao Zi
• [PATCH 09/10] board: thead: licheepi4a: Enable SPL support   Yao Zi
• [PATCH 10/10] doc: thead: lpi4a: Update documentation   Yao Zi
• [PATCH 04/10] ram: thead: Add initial DDR controller support for TH1520   Yao Zi
• [PATCH] riscv: dts: binman.dtsi: Drop filename property for proper U-Boot   Yao Zi
• Build for RISC-V with LLVM   Yao Zi
• [PATCH 0/2] Clang compatibility improvements for RISC-V   Yao Zi
• [PATCH 1/2] Makefile: Strip leading spaces when preprocessing generated_defconfig   Yao Zi
• [PATCH 2/2] riscv: Access gd with inline assembly when building with LTO or Clang   Yao Zi
• [PATCH 1/2] Makefile: Strip leading spaces when preprocessing generated_defconfig   Yao Zi
• [PATCH 1/2] Makefile: Strip leading spaces when preprocessing generated_defconfig   Yao Zi
• [PATCH 1/2] Makefile: Strip leading spaces when preprocessing generated_defconfig   Yao Zi
• [REGRESSION] [PATCH v6 0/3] Static initcalls   Marcel Ziswiler
• [PATCH] common: board: fix build condition of noncached memory initcall   Marcel Ziswiler
• [SPAM][REGRESSION] [PATCH v6 0/3] Static initcalls   Marcel Ziswiler
• [PATCH v1 0/2] SoCFPGA: Add reset support for SoC64 F2S bridges   alif.zakuan.yuslaimi at altera.com
• [PATCH v1 1/2] arm: socfpga: soc64: Update reset manager registers for F2S bridge   alif.zakuan.yuslaimi at altera.com
• [PATCH v1 2/2] arm: socfpga: soc64: Enable F2S bridge reset support   alif.zakuan.yuslaimi at altera.com
• [PATCH v1] configs: agilex5: Restore fixed bloblist   alif.zakuan.yuslaimi at altera.com
• [PATCH v1] configs: agilex5: Restore fixed bloblist   alif.zakuan.yuslaimi at altera.com
• [PATCH v1] arch: arm: dts: agilex5: Set SDIO_SEL GPIO pin as output   alif.zakuan.yuslaimi at altera.com
• [PATCH v1] arm: socfpga: soc64: Update SoC64 CPU info   alif.zakuan.yuslaimi at altera.com
• [resend v4 00/12] Add Synopsys MIPI I3C Driver support   dinesh.maniyam at altera.com
• [resend v4 01/12] drivers: i3c: Add new i3c uclass id   dinesh.maniyam at altera.com
• [resend v4 02/12] drivers: i3c: Add driver for MIPI DWI3C   dinesh.maniyam at altera.com
• [resend v4 03/12] drivers: i3c: Add i3c uclass driver.   dinesh.maniyam at altera.com
• [resend v4 04/12] drivers: Enabled Kconfig and Makefile for i3c support   dinesh.maniyam at altera.com
• [resend v4 05/12] drivers: i3c: Enabled Kconfig and Makefile for DWI3C   dinesh.maniyam at altera.com
• [resend v4 06/12] drivers: i3c: Add i3c sandbox simple test.   dinesh.maniyam at altera.com
• [resend v4 07/12] drivers: i3c: master: Enable probe i3c without slave device   dinesh.maniyam at altera.com
• [resend v4 08/12] i3c: master: dw-i3c-master: Fix OD_TIMING for spike filter   dinesh.maniyam at altera.com
• [resend v4 09/12] cmd: Add i3c command support.   dinesh.maniyam at altera.com
• [resend v4 10/12] test: cmd: Add simple test for i3c   dinesh.maniyam at altera.com
• [resend v4 11/12] configs: sandbox_defconfig: Enable configs for sandbox i3c   dinesh.maniyam at altera.com
• [resend v4 12/12] configs: agilex5_defconfig: Enable i3c configs for agilex5   dinesh.maniyam at altera.com
• [PATCH v1 0/5] Agilex5 DDR Driver Enhancement   tingting.meng at altera.com
• [PATCH v1 1/5] arm: socfpga: agilex5: Add MMU mapping region   tingting.meng at altera.com
• [PATCH v1 2/5] arm: socfpga: socfpga_soc64: Enable LMB_ARCH_MEM_MAP   tingting.meng at altera.com
• [PATCH v1 3/5] arm: dts: agilex5: Update CCU configuration   tingting.meng at altera.com
• [PATCH v1 4/5] ddr: altera: agilex5: LPDDRs in-line ECC support   tingting.meng at altera.com
• [PATCH v1 5/5] ddr: altera: iossm: Enhance debug information for ECC errors   tingting.meng at altera.com
• [PATCH v1 1/1] arm: socfpga: agilex5: Sub-device check enabled for runtime workaround   tingting.meng at altera.com
• [PATCH v1 1/1] arm: socfpga: agilex5: Coverity issue cleanup in jtag_usercode check   tingting.meng at altera.com
• [PATCH 0/3] u-boot chain-loading LineageOS bootimg   george chan
• [PATCH 0/3] u-boot chain-loading LineageOS bootimg   george chan
• [PATCH 0/3] u-boot chain-loading LineageOS bootimg   george chan
• [PATCH] tools: Fix handle leak in mmap_fdt function   ant.v.moryakov at gmail.com
• [PATCH] scripts: Fix potential null-deref   ant.v.moryakov at gmail.com
• [PATCH] tools: Fix memory and descriptor leak   ant.v.moryakov at gmail.com
• [PATCH] tools: Fix potential memory leak in aisimage.c   ant.v.moryakov at gmail.com
• [PATCH] tools: image-host: Fix potential memory leak   ant.v.moryakov at gmail.com
• [PATCH] tools: image-host: Fix potential memory leak   ant.v.moryakov at gmail.com
• [PATCH] tools: image-host: Fix potential memory leak   ant.v.moryakov at gmail.com
• [PATCH] tools: Fix memory and file descriptor leaks in read_full_file()   ant.v.moryakov at gmail.com
• [PATCH] tools: Fix potential memory leak in aisimage.c   ant.v.moryakov at gmail.com
• [PATCH] tools: Fix memory and descriptor leak   ant.v.moryakov at gmail.com
• [2nd RESEND PATCH 0/2] Add support for Infineon S28HL256T and S28HL02GT   tkuw584924 at gmail.com
• [2nd RESEND PATCH 1/2] mtd: spi-nor-ids: Add support for S28HL256T   tkuw584924 at gmail.com
• [2nd RESEND PATCH 2/2] mtd: spi-nor-ids: Add support for S28HL02GT   tkuw584924 at gmail.com
• [PATCH v1 0/1] *** Initial Wiznet W5500 support ***   verdun at hpe.com
• [PATCH v1 1/1] Initial support for Wiznet W5500   verdun at hpe.com
• [PATCH v2 0/1] *** Initial Wiznet W5500 support ***   verdun at hpe.com
• [PATCH v2 1/1] Initial support for Wiznet W5500   verdun at hpe.com
• [PATCH] pinctrl: qcom: handle reserved ranges   neil.armstrong at linaro.org
• [PATCH 2/4] fastboot: blk: add block device flashing configuration   neil.armstrong at linaro.org
• [PATCH 2/4] fastboot: blk: add block device flashing configuration   neil.armstrong at linaro.org
• [PATCH v1 0/3] Enable env in UFS   neil.armstrong at linaro.org
• [PATCH 1/2] efi_loader: Move public cert for capsules to .rodata   neil.armstrong at linaro.org
• Re: U-Boot interferes with initrd binary — Revert "efi: Correct smbios-table installation" ?   neil.armstrong at linaro.org
• Re: U-Boot interferes with initrd binary — Revert "efi: Correct smbios-table installation" ?   neil.armstrong at linaro.org
• [PATCH v2 1/4] designware: Use the remove() method with related drivers   neil.armstrong at linaro.org
• [PATCH v2 2/4] net: designware: Mark drivers as having active DMA   neil.armstrong at linaro.org
• [PATCH 1/7] board: qualcomm: dragonboard820c: udpate readme   neil.armstrong at linaro.org
• [PATCH 2/7] clk/qcom: apq8096: fix set rate for the uart clock   neil.armstrong at linaro.org
• [PATCH 3/7] mmc: msm_sdhci: handle bulk clock initialization error   neil.armstrong at linaro.org
• [PATCH 4/7] clk/qcom: apq8096: fix the sdhci clock   neil.armstrong at linaro.org
• [PATCH 5/7] configs: dragonboard820: enable GPIO   neil.armstrong at linaro.org
• [PATCH 6/7] mach-snapdragon: board interface to enforce fdt   neil.armstrong at linaro.org
• [PATCH 3/5] clk/qcom: apq8096: fix the sdhci clock   neil.armstrong at linaro.org
• [PATCH 4/5] clk: stub: add qcom,glink-smd-rpm   neil.armstrong at linaro.org
• [PATCH 3/5] clk/qcom: apq8096: fix the sdhci clock   neil.armstrong at linaro.org
• [PATCH RFT v2 0/3] fastboot: add support for generic block flashing   neil.armstrong at linaro.org
• [PATCH RFT v2 1/3] fastboot: blk: introduce fastboot block flashing support   neil.armstrong at linaro.org
• [PATCH RFT v2 2/3] fastboot: blk: switch emmc to use the block helpers   neil.armstrong at linaro.org
• [PATCH RFT v2 3/3] fastboot: integrate block flashing back-end   neil.armstrong at linaro.org
• [PATCH v2] pinctrl: qcom: handle reserved ranges   neil.armstrong at linaro.org
• [PATCH v2 2/2] phy: phy-qcom-qusb2: Fix USB PHY power on sequence   neil.armstrong at linaro.org
• [PATCH v2 2/2] phy: phy-qcom-qusb2: Fix USB PHY power on sequence   neil.armstrong at linaro.org
• [PATCH v2 1/2] qcom_defconfig: Disable MMC HS200 mode support   neil.armstrong at linaro.org
• [PATCH 0/2] ARM: meson: finally switch to livetree   neil.armstrong at linaro.org
• [PATCH 1/2] pinctrl: meson: convert to livetree   neil.armstrong at linaro.org
• Wiznet w5500 support   neil.armstrong at linaro.org
• [PATCH v2 1/1] Initial support for Wiznet W5500   neil.armstrong at linaro.org
• [PATCH RFT v2 1/3] fastboot: blk: introduce fastboot block flashing support   neil.armstrong at linaro.org
• [PATCH RFT v2 1/3] fastboot: blk: introduce fastboot block flashing support   neil.armstrong at linaro.org
• [PATCH v2 1/2] sysreset: Implement PSCI based reset to EDL mode for QCOM SoCs   neil.armstrong at linaro.org
• [PATCH v1 0/1] USB xHCI wrong act_len calculation in case of using multipe TRB   marcan
• [PATCH 1/2] riscv: dts: k1: add pinctrl property in dts.   pericycle
• [PATCH] spin_table: add missing header for ENODEV and ENOSPC symbols   yan wang
• [PATCH] eth: Support E1000E I225-V   zhangzhijie
• [PATCH] configs: rpi: set NR_DRAM_BANKS to 8 to accommodate RAM on 16GB models   Jan Čermák
• [PATCH v2 1/8] power: regulator: Add a driver for the AXP PMIC drivevbus   Jernej Škrabec
• [PATCH v2 2/8] sunxi: Enable PMIC drivevbus regulator support for USB supplies   Jernej Škrabec
• [PATCH v2 3/8] phy: sun4i-usb: Control supplies via the regulator uclass   Jernej Škrabec
• [PATCH v2 4/8] sunxi: Remove obsolete USBx_VBUS_PIN Kconfig symbols   Jernej Škrabec
• [PATCH v2 5/8] gpio: axp: Remove virtual VBUS enable GPIO   Jernej Škrabec
• [PATCH v2 6/8] phy: sun4i-usb: Determine VBUS detection pin from devicetree   Jernej Škrabec
• [PATCH v2 7/8] phy: sun4i-usb: Determine USB OTG detection pin from devicetree   Jernej Škrabec
• [PATCH v2 8/8] sunxi: Kconfig: Remove obsolete USBx_* pin symbols   Jernej Škrabec
• [PATCH 5/5] sunxi: h6/h616: Reuse common DRAM infrastructure   Jernej Škrabec
• [PATCH] sunxi: enable MMU_PGPROT proper page table protection   Jernej Škrabec
• [PATCH 5/5] sunxi: h6/h616: Reuse common DRAM infrastructure   Jernej Škrabec
• [PATCH] bootm: Support load images when os is elf   牛 志宏
• [PATCH] bootm: Support get entry when setup.bin were not found   牛 志宏
• [PATCH] bootm: improve error message when gzip decompression buffer is too small   陳偉銘