[PATCH 3/5] clk/qcom: apq8096: fix the sdhci clock

[Caleb Connolly]

On 4/7/25 16:17, Jorge Ramirez wrote:
> On 07/04/25 14:36:51, neil.armstrong at linaro.org wrote:
>> On 07/04/2025 14:05, Jorge Ramirez-Ortiz wrote:
>>> Select the right clock for sdhci.
>>>
>>> Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez at oss.qualcomm.com>
>>> Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>
>>> ---
>>>    drivers/clk/qcom/clock-apq8096.c | 2 +-
>>>    1 file changed, 1 insertion(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/clk/qcom/clock-apq8096.c b/drivers/clk/qcom/clock-apq8096.c
>>> index bc00826a5e8..551f52d5197 100644
>>> --- a/drivers/clk/qcom/clock-apq8096.c
>>> +++ b/drivers/clk/qcom/clock-apq8096.c
>>> @@ -83,7 +83,7 @@ static ulong apq8096_clk_set_rate(struct clk *clk, ulong rate)
>>>    	struct msm_clk_priv *priv = dev_get_priv(clk->dev);
>>>    	switch (clk->id) {
>>> -	case GCC_SDCC1_APPS_CLK: /* SDC1 */
>>> +	case GCC_SDCC2_APPS_CLK: /* SDC2 */
>>
>> Should be GCC_SDCC2_AHB_CLK
> 
> why? also if I do that, mcc fails to probe

GCC_SDCC2_APPS_CLK is correct, that's the "core" clock and the one the 
sdhci_msm driver calls clk_set_rate() on. So this patch is good. I 
suspect the misuse of GCC_SDCC1_APPS_CLK is from way back when this 
board had a custom DT that didn't follow upstream.

Reviewed-by: Caleb Connolly <caleb.connolly at linaro.org>>
>>
>>>    		return clk_init_sdc(priv, rate);
>>>    		break;
>>>    	case GCC_BLSP2_UART2_APPS_CLK: /*UART2*/
>>

-- 
Caleb (they/them)