[PATCH 00/34] sunxi: clock refactoring and Allwinner A523 support

[Yixun Lan]

Hi Andre:

On 13:32 Sat 05 Apr     , Andre Przywara wrote:
> On Sat, 5 Apr 2025 02:44:33 +0000
> Yixun Lan <dlan at gentoo.org> wrote:
> 
> Hi,
> 
> > On 11:35 Sun 23 Mar     , Andre Przywara wrote:
> > > This series introduces support for the Allwinner A523 SoC family. The
> > > same die is used in different packages: the A523, A527, T527, and H728:
> > > they connect a different set of peripherals to the pins, or enable extra
> > > goodies like an NPU. From a U-Boot perspective those chips do not differ
> > > much, all the differences are described in the board DT files.
> > > These patches are not the most refined at the moment, but I hope that
> > > people start reviewing them, so we can merge the ones that are ready,
> > > to reduce their number.
...
> > is ATF loading address correct, 0x54000 here? which seems override sp address?
> 
> Yes, that's the correct address. Which SP would it collide with, anyway?
> 
> So in summary you did everything right, and the SPL is returning to FEL
> with DRAM initialised, which is the biggest hurdle.
> Just use the correct A523 TF-A branch and build target.
>
right, with correct ATF, I'm able to boot into uboot console
also, emmc works on radxa a5e board (same change with avaota-a1)..

thanks
-- 
Yixun Lan (dlan)
Gentoo Linux Developer
GPG Key ID AABEFD55