[PATCH V2 3/9] beagle: beagley-ai: env: Set up the boot devices and boot methods

[Nishanth Menon]

On 18:40-20250419, Kumar, Udit wrote:
> 
> On 4/19/2025 1:09 AM, Nishanth Menon wrote:
> > We just have a single MMC on BeagleY-AI. So drop all other boot options,
> > 
> > In the meanwhile, we also will use efiboot and standard boot methods
> > consistent with other K3 Beagle products.
> > 
> > Signed-off-by: Nishanth Menon <nm at ti.com>
> > ---
> > Changes Since v1:
> > - None
> > 
> > V1: https://lore.kernel.org/r/20250411225717.3117370-4-nm@ti.com
> > 
> >   board/beagle/beagley-ai/beagley-ai.env | 3 ++-
> >   1 file changed, 2 insertions(+), 1 deletion(-)
> > 
> > diff --git a/board/beagle/beagley-ai/beagley-ai.env b/board/beagle/beagley-ai/beagley-ai.env
> > index 10d62034e1af..db29d13420aa 100644
> > --- a/board/beagle/beagley-ai/beagley-ai.env
> > +++ b/board/beagle/beagley-ai/beagley-ai.env
> > @@ -11,7 +11,8 @@ args_all=setenv optargs ${optargs} earlycon=ns16550a,mmio32,0x02800000
> >   	${mtdparts}
> >   run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr}
> > -boot_targets=mmc1 mmc0 pxe dhcp
> > +boot_targets=mmc1
> > +bootmeths=script extlinux efi pxe
> 
> I am not too sure, if pxe boot is supported on this platform,
> 
> Please check once.

What we support is PXE boot at U-boot level. All we need is Ethernet,
which is enabled.


-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D