[PATCH v3 11/12] configs: pinetab2-rk3566: Enable video and USB keyboard

[Dang Huynh]

On Sun, Apr 13, 2025 at 05:26:03PM +0200, Jonas Karlman wrote:
> Hi,
> 
> On 2025-04-12 16:27, Dang Huynh wrote:
> > Now that we have VOP2 support, let's enable it and support the
> > built in USB keyboard.
> > 
> > Signed-off-by: Dang Huynh <danct12 at riseup.net>
> > ---
> >  configs/pinetab2-rk3566_defconfig | 11 +++++++++++
> >  1 file changed, 11 insertions(+)
> > 
> > diff --git a/configs/pinetab2-rk3566_defconfig b/configs/pinetab2-rk3566_defconfig
> > index 45e63b42d192dc172f24e071b09c8203675965d8..792ec0ec119437fd7a920558a149363c886c87de 100644
> > --- a/configs/pinetab2-rk3566_defconfig
> > +++ b/configs/pinetab2-rk3566_defconfig
> > @@ -57,6 +57,7 @@ CONFIG_BUTTON=y
> >  CONFIG_BUTTON_ADC=y
> >  CONFIG_BUTTON_GPIO=y
> >  CONFIG_SPL_CLK=y
> > +CONFIG_CLK_CCF=y
> 
> Rockchip clk drivers does not use this, and I do not see any new clock
> driver being added in this series.
> 
> Why is this needed?
I initially added this to get around clk_enable error, but it seems like
you don't need to enable VOP clocks.

However, I noticed that enabling CCF will give us clock rate that are
pretty close to how it's configured on Linux.

> 
> Regards,
> Jonas
> 
> >  # CONFIG_USB_FUNCTION_FASTBOOT is not set
> >  CONFIG_ROCKCHIP_GPIO=y
> >  CONFIG_SYS_I2C_ROCKCHIP=y
> > @@ -69,6 +70,7 @@ CONFIG_MMC_SDHCI_SDMA=y
> >  CONFIG_MMC_SDHCI_ROCKCHIP=y
> >  CONFIG_SPI_FLASH_SFDP_SUPPORT=y
> >  CONFIG_SPI_FLASH_SILICONKAISER=y
> > +CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY=y
> >  CONFIG_PHY_ROCKCHIP_INNO_USB2=y
> >  CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y
> >  CONFIG_SPL_PINCTRL=y
> > @@ -94,6 +96,7 @@ CONFIG_USB_OHCI_HCD=y
> >  CONFIG_USB_OHCI_GENERIC=y
> >  CONFIG_USB_DWC3=y
> >  CONFIG_USB_DWC3_GENERIC=y
> > +CONFIG_USB_KEYBOARD=y
> >  CONFIG_USB_HOST_ETHER=y
> >  CONFIG_USB_ETHER_ASIX=y
> >  CONFIG_USB_ETHER_ASIX88179=y
> > @@ -101,4 +104,12 @@ CONFIG_USB_ETHER_RTL8152=y
> >  CONFIG_USB_GADGET=y
> >  CONFIG_USB_GADGET_DOWNLOAD=y
> >  CONFIG_USB_FUNCTION_ROCKUSB=y
> > +CONFIG_VIDEO=y
> > +CONFIG_VIDEO_LCD_BOE_TH101MB31IG002_28A=y
> > +CONFIG_DISPLAY=y
> > +CONFIG_VIDEO_ROCKCHIP=y
> > +CONFIG_DISPLAY_ROCKCHIP_HDMI=y
> > +CONFIG_DISPLAY_ROCKCHIP_DW_MIPI=y
> > +CONFIG_VIDEO_BRIDGE=y
> > +CONFIG_VIDEO_REMOVE=y
> >  CONFIG_ERRNO_STR=y
> > 
>