[PATCH 08/21] board: st: stm32mp2: add user button support

[Patrice Chotard]

From: Patrick Delaunay <patrick.delaunay at foss.st.com>

Handle user button 2 to force boot with STM32CubeProgrammer.

Signed-off-by: Patrick Delaunay <patrick.delaunay at foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard at foss.st.com>
---

 board/st/stm32mp2/stm32mp2.c | 26 ++++++++++++++++++++++++++
 configs/stm32mp25_defconfig  |  4 +++-
 2 files changed, 29 insertions(+), 1 deletion(-)

diff --git a/board/st/stm32mp2/stm32mp2.c b/board/st/stm32mp2/stm32mp2.c
index 576a958c783..6e4f19b1664 100644
--- a/board/st/stm32mp2/stm32mp2.c
+++ b/board/st/stm32mp2/stm32mp2.c
@@ -5,6 +5,7 @@
 
 #define LOG_CATEGORY LOGC_BOARD
 
+#include <button.h>
 #include <config.h>
 #include <env_internal.h>
 #include <fdt_support.h>
@@ -13,10 +14,12 @@
 #include <misc.h>
 #include <mmc.h>
 #include <asm/global_data.h>
+#include <asm/io.h>
 #include <asm/arch/sys_proto.h>
 #include <dm/device.h>
 #include <dm/ofnode.h>
 #include <dm/uclass.h>
+#include <linux/delay.h>
 
 /*
  * Get a global data pointer
@@ -90,10 +93,33 @@ static int setup_led(enum led_state_t cmd)
 	return ret;
 }
 
+static void check_user_button(void)
+{
+	struct udevice *button;
+	int i;
+
+	if (!IS_ENABLED(CONFIG_CMD_STM32PROG) || !IS_ENABLED(CONFIG_BUTTON))
+		return;
+
+	if (button_get_by_label("User-2", &button))
+		return;
+
+	for (i = 0; i < 21; ++i) {
+		if (button_get_state(button) != BUTTON_ON)
+			return;
+		if (i < 20)
+			mdelay(50);
+	}
+
+	log_notice("entering download mode...\n");
+	clrsetbits_le32(TAMP_BOOT_CONTEXT, TAMP_BOOT_FORCED_MASK, BOOT_STM32PROG);
+}
+
 /* board dependent setup after realloc */
 int board_init(void)
 {
 	setup_led(LEDST_ON);
+	check_user_button();
 
 	return 0;
 }
diff --git a/configs/stm32mp25_defconfig b/configs/stm32mp25_defconfig
index 3d6665335f5..3f765346904 100644
--- a/configs/stm32mp25_defconfig
+++ b/configs/stm32mp25_defconfig
@@ -39,12 +39,14 @@ CONFIG_ENV_IS_IN_MMC=y
 CONFIG_SYS_MMC_ENV_DEV=-1
 CONFIG_NO_NET=y
 CONFIG_SYS_64BIT_LBA=y
+CONFIG_BUTTON=y
+CONFIG_BUTTON_GPIO=y
 CONFIG_GPIO_HOG=y
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_STM32F7=y
-CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_LED=y
 CONFIG_LED_GPIO=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_STM32_SDMMC2=y
 CONFIG_MTD=y
 CONFIG_USE_SYS_MAX_FLASH_BANKS=y
-- 
2.25.1