[PATCH v6 05/12] power-domain: Add refcounting

[Neha Malcom Francis]

Hi Miquel

On 15/04/25 15:20, Miquel Raynal wrote:
>>> Francesco, are you also testing on K3 platforms?
>>>
>>
>> Yes he would be, since the firmware print is K3 firmware.
>>
>>> Can one of you boot with the patch below applied? It should partially
>>> revert the commit to the ancient behaviour, while adding more debug
>>> traces (please enable the debug logs as well). This should clarify
>>> which one of the 3 different path is likely failing. It should also help
>>> identify who's the user that fails to enable/disable its own power
>>> domain. I will need to know what board/SoC was used for the test, so I
>>> can look the relevant driver up.
>>
>> Booted on j784s4_evm
>>
>> https://gist.github.com/nehamalcom/b09687a523bec89f9df3537fdd99b6f3

^
>>
>> Currently debugging on my build where I hang in console_init itself, I
>> think the path for failure is different here, will confirm.
> 
> Thanks a lot for your feedback. Normally by applying the diff shared in
> my previous e-mail, you should have the console back. If not, maybe
> there is something else involved and the blamed commit is just the first
> showing an underlying problem.

I do have console back with that patch, see the gist link above. What I
meant was the path of failure seems to be different, it's looking like
with my version of firmware the serial driver probe
(ns16550_serial_probe) tries to do a readb() and fails, this could
possibly be because the device was not powered on to begin with. Whereas
in another case (what Francesco is seeing), this issue is not run into.


> 
> Thanks,
> Miquèl

-- 
Thanking You
Neha Malcom Francis