[PATCH v6 05/12] power-domain: Add refcounting

[Miquel Raynal]

>> Francesco, are you also testing on K3 platforms?
>> 
>
> Yes he would be, since the firmware print is K3 firmware.
>
>> Can one of you boot with the patch below applied? It should partially
>> revert the commit to the ancient behaviour, while adding more debug
>> traces (please enable the debug logs as well). This should clarify
>> which one of the 3 different path is likely failing. It should also help
>> identify who's the user that fails to enable/disable its own power
>> domain. I will need to know what board/SoC was used for the test, so I
>> can look the relevant driver up.
>
> Booted on j784s4_evm
>
> https://gist.github.com/nehamalcom/b09687a523bec89f9df3537fdd99b6f3
>
> Currently debugging on my build where I hang in console_init itself, I
> think the path for failure is different here, will confirm.

Thanks a lot for your feedback. Normally by applying the diff shared in
my previous e-mail, you should have the console back. If not, maybe
there is something else involved and the blamed commit is just the first
showing an underlying problem.

Thanks,
Miquèl