[PATCH 3/4] arm: dts: k3-{j721s2/j784s4}-binman: Pack HSM firmware inside tispl.bin

[Beleswar Padhi]

Pack the HSM firmware in tispl.bin fit image so that it can be unloaded
and used by R5 SPL to boot the HSM core. By default, point to the
firmware for HS-SE device type. This needs to be changed to point to
appropriate firmware when using a different device type.

Signed-off-by: Beleswar Padhi <b-padhi at ti.com>
---
 arch/arm/dts/k3-j721s2-binman.dtsi | 12 ++++++++++++
 arch/arm/dts/k3-j784s4-binman.dtsi | 14 ++++++++++++++
 2 files changed, 26 insertions(+)

diff --git a/arch/arm/dts/k3-j721s2-binman.dtsi b/arch/arm/dts/k3-j721s2-binman.dtsi
index d121d8c0c54..1e6cdf92421 100644
--- a/arch/arm/dts/k3-j721s2-binman.dtsi
+++ b/arch/arm/dts/k3-j721s2-binman.dtsi
@@ -280,6 +280,14 @@
 
 					};
 				};
+#ifdef CONFIG_K3_HSM_FW
+				hsm {
+					hsm: blob-ext {
+						filename = "ti-hsm/hsm-demo-firmware-j721s2-hs.bin";
+					};
+				};
+#endif
+
 				dm {
 					ti-secure {
 						content = <&dm>;
@@ -312,7 +320,11 @@
 				conf-0 {
 					description = "k3-j721s2-common-proc-board";
 					firmware = "atf";
+#ifdef CONFIG_K3_HSM_FW
+					loadables = "hsm", "tee", "dm", "spl";
+#else
 					loadables = "tee", "dm", "spl";
+#endif
 					fdt = "fdt-0";
 				};
 			};
diff --git a/arch/arm/dts/k3-j784s4-binman.dtsi b/arch/arm/dts/k3-j784s4-binman.dtsi
index 0553825b383..ab417a47034 100644
--- a/arch/arm/dts/k3-j784s4-binman.dtsi
+++ b/arch/arm/dts/k3-j784s4-binman.dtsi
@@ -159,6 +159,16 @@
 
 		fit {
 			images {
+
+#ifdef CONFIG_K3_HSM_FW
+				hsm {
+					hsm: blob-ext {
+						filename = "ti-hsm/hsm-demo-firmware-j784s4-hs.bin";
+					};
+				};
+
+#endif
+
 				dm {
 					ti-secure {
 						content = <&dm>;
@@ -194,7 +204,11 @@
 				conf-0 {
 					description = BOARD_DESCRIPTION;
 					firmware = "atf";
+#ifdef CONFIG_K3_HSM_FW
+					loadables = "hsm", "tee", "dm", "spl";
+#else
 					loadables = "tee", "dm", "spl";
+#endif
 					fdt = "fdt-0";
 				};
 			};
-- 
2.34.1