[PATCH v5 00/29] pxe: Precursor series for supporting read_all() in extlinux / PXE

[Tom Rini]

On Sat, Apr 05, 2025 at 08:40:08AM -0600, Tom Rini wrote:
> On Fri, Apr 04, 2025 at 04:48:01PM -0600, Tom Rini wrote:
> > On Fri, Apr 04, 2025 at 11:32:12PM +0200, Jonas Karlman wrote:
> > > Hi Simon,
> > > 
> > > On 2025-04-04 00:30, Simon Glass wrote:
> > > > Hi Jonas,
> > > > 
> > > > On Fri, 4 Apr 2025 at 09:57, Jonas Karlman <jonas at kwiboo.se> wrote:
> > > >>
> > > >> Hi Tom and Simon,
> > > >>
> > > >> On 2025-03-19 00:21, Tom Rini wrote:
> > > >>> On Wed, 05 Mar 2025 17:24:54 -0700, Simon Glass wrote:
> > > >>>
> > > >>>> This series includes some patches related to allowing read_all() to be
> > > >>>> used with the extlinux / PXE bootmeths.
> > > >>>>
> > > >>>> These patches were split out from the stb4 series, since it will need to
> > > >>>> have additional patches for LWIP, to avoid breaking PXE booting when
> > > >>>> LWIP is used.
> > > >>>>
> > > >>>> [...]
> > > >>>
> > > >>> Applied to u-boot/next, thanks!
> > > >>
> > > >> This series broke booting a compressed arm64 defconfig Linux kernel
> > > >> (without module loading) due to changes in decompression buffer length.
> > > >>
> > > >> My arm64 defconfig kernel (Image.gz) is ~24 MiB compressed and ~85 MiB
> > > >> uncompressed.
> > > >>
> > > >> Before this series the decompression buffer was 10x the kernel_comp_size
> > > >> and now it is instead limited by the SYS_BOOTM_LEN Kconfig symbol.
> > > >>
> > > >> A broken boot using current next branch:
> > > >>
> > > >>   Retrieving file: /Image.gz
> > > >>   Retrieving file: /initramfs.cpio.gz
> > > >>   append: earlycon
> > > >>   cmd 'booti' states 1f1f addr_img '0x02080000' conf_ramdisk '0x06000000:394d3c' conf_fdt '3df16350' images 000000003ffe53a0
> > > >>      kernel data at 0x02080000, len = 0x00000000 (0)
> > > >>   load 2080000 start 2080000 len 0 ep 0 os 5 comp 1
> > > >>   find_other type 2 os 5
> > > >>   ## Flattened Device Tree blob at 3df16350
> > > >>      Booting using the fdt blob at 0x3df16350
> > > >>   Working FDT set to 3df16350
> > > >>   load_os load 8000000 image_start 2080000 image_len 2000000
> > > >>      Uncompressing Kernel Image to 8000000
> > > >>   Error: inflate() returned -5
> > > >>   Image too large: increase CONFIG_SYS_BOOTM_LEN
> > > >>   Must RESET board to recover
> > > >>   Resetting the board...
> > > >>
> > > >> Changing SYS_BOOTM_LEN from default 64 MiB to 128 MiB fixed the boot:
> > > >>
> > > >>   Retrieving file: /Image.gz
> > > >>   Retrieving file: /initramfs.cpio.gz
> > > >>   append: earlycon
> > > >>   cmd 'booti' states 1f1f addr_img '0x02080000' conf_ramdisk '0x06000000:394d3c' conf_fdt '3df16430' images 000000003ffe5480
> > > >>      kernel data at 0x02080000, len = 0x00000000 (0)
> > > >>   load 2080000 start 2080000 len 0 ep 0 os 5 comp 1
> > > >>   find_other type 2 os 5
> > > >>   ## Flattened Device Tree blob at 3df16430
> > > >>      Booting using the fdt blob at 0x3df16430
> > > >>   Working FDT set to 3df16430
> > > >>   load_os load 8000000 image_start 2080000 image_len 2000000
> > > >>      Uncompressing Kernel Image to 8000000
> > > >>      kernel loaded at 0x08000000, end = 0x0d3b5a00
> > > >>      Loading Ramdisk to 3cb51000, end 3cee5d3c ... OK
> > > >>      Loading Device Tree to 000000003cb3f000, end 000000003cb509df ... OK
> > > >>   Working FDT set to 3cb3f000
> > > >>
> > > >>   Starting kernel ...
> > > >>
> > > >> Do we need to increase the default SYS_BOOTM_LEN for ARM64 now?
> > > > 
> > > > Are you using the 'booti' command? Can you post a bit more console
> > > > output or a script here as it isn't clear what boot command you are
> > > > using? For now I'm going to assume booti
> > > 
> > > Above was using an extlinux.conf with bootstd, not using the booti cmd.
> > > 
> > > Use of booti cmd is not affected as it continue to use a 10x multiple
> > > of the kernel_comp_size env var for buffer size.
> > > 
> > > The change this series introduced was instead of the 10x multiple of
> > > kernel_comp_size now use SYS_BOOTM_LEN for buffer size (320 vs 32 MiB).
> > > 
> > > And because cmd/booti.c was not converted there is now two different
> > > handling of this decompression buffer size.
> > > 
> > > If the change to now use SYS_BOOTM_LEN was intended this need to be
> > > changed as it has mostly been irrelevant for booting Linux on AArch64
> > > boards prior to this series.
> > 
> > We need to clean things up such that the path which is using 10x
> > multiple (and we lmb_alloc an area iirc) is used in all cases.
> 
> Looking at the code this morning, I was confusing this with what we do
> for compressed FIT images, oops.

Ugh. Simon, can you go and fix this whole problem? Both do_bootz and
do_booti have non-trivial amounts of code that's missed by changing from
calling do_bootX() to bootX_run().

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20250405/687342a8/attachment.sig>