[PATCH v1 9/9] board: lg: star: add Optimus 2X P990 support
Svyatoslav Ryhel
clamor95 at gmail.com
Mon Apr 14 08:00:19 CEST 2025
The LG Optimus 2X is a touchscreen-based, slate-sized smartphone designed
and manufactured by LG that runs the Android operating system. The
Optimus 2X features a 4" WVGA display, an Nvidia Tegra 2 dual-core chip,
512 MB of RAM and extendable 8 GB of internal storage. UART-B is default
debug port.
Tested-by: Ion Agorria <ion at agorria.com>
Signed-off-by: Svyatoslav Ryhel <clamor95 at gmail.com>
---
arch/arm/dts/Makefile | 1 +
arch/arm/dts/tegra20-lg-star.dts | 538 ++++++++++++++++++++++++++++
arch/arm/mach-tegra/tegra20/Kconfig | 5 +
board/lg/star/Kconfig | 16 +
board/lg/star/MAINTAINERS | 7 +
board/lg/star/Makefile | 9 +
board/lg/star/star.c | 50 +++
board/lg/star/star.env | 15 +
configs/star_defconfig | 93 +++++
doc/board/lg/index.rst | 1 +
doc/board/lg/star.rst | 125 +++++++
11 files changed, 860 insertions(+)
create mode 100644 arch/arm/dts/tegra20-lg-star.dts
create mode 100644 board/lg/star/Kconfig
create mode 100644 board/lg/star/MAINTAINERS
create mode 100644 board/lg/star/Makefile
create mode 100644 board/lg/star/star.c
create mode 100644 board/lg/star/star.env
create mode 100644 configs/star_defconfig
create mode 100644 doc/board/lg/star.rst
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 57d3dd98ffb..d46893c772c 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -86,6 +86,7 @@ dtb-$(CONFIG_ARCH_TEGRA) += \
tegra20-asus-tf101.dtb \
tegra20-asus-tf101g.dtb \
tegra20-harmony.dtb \
+ tegra20-lg-star.dtb \
tegra20-medcom-wide.dtb \
tegra20-motorola-daytona.dtb \
tegra20-motorola-olympus.dtb \
diff --git a/arch/arm/dts/tegra20-lg-star.dts b/arch/arm/dts/tegra20-lg-star.dts
new file mode 100644
index 00000000000..3045bc3135f
--- /dev/null
+++ b/arch/arm/dts/tegra20-lg-star.dts
@@ -0,0 +1,538 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+
+#include "tegra20.dtsi"
+
+/ {
+ model = "LG Optimus 2X (P990)";
+ compatible = "lg,star", "nvidia,tegra20";
+
+ chosen {
+ stdout-path = &uartb;
+ };
+
+ aliases {
+ i2c0 = &pwr_i2c;
+ i2c5 = &dcdc_i2c;
+
+ mmc0 = &sdmmc4; /* eMMC */
+ mmc1 = &sdmmc3; /* uSD slot */
+
+ rtc0 = &pmic;
+ rtc1 = "/rtc at 7000e000";
+
+ usb0 = µ_usb;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x20000000>; /* 512 MB */
+ };
+
+ host1x at 50000000 {
+ dc at 54200000 {
+ rgb {
+ status = "okay";
+
+ port {
+ dpi_output: endpoint {
+ remote-endpoint = <&bridge_input>;
+ bus-width = <24>;
+ };
+ };
+ };
+ };
+ };
+
+ pinmux at 70000014 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ crt {
+ nvidia,pins = "crtp";
+ nvidia,function = "crt";
+ };
+
+ dap1 {
+ nvidia,pins = "dap1";
+ nvidia,function = "dap1";
+ };
+
+ dap2 {
+ nvidia,pins = "dap2";
+ nvidia,function = "dap2";
+ };
+
+ dap3 {
+ nvidia,pins = "dap3";
+ nvidia,function = "dap3";
+ };
+
+ dap4 {
+ nvidia,pins = "dap4";
+ nvidia,function = "dap4";
+ };
+
+ displaya {
+ nvidia,pins = "lcsn", "ld0", "ld1", "ld10",
+ "ld11", "ld12", "ld13", "ld14",
+ "ld15", "ld16", "ld17", "ld2",
+ "ld3", "ld4", "ld5", "ld6",
+ "ld7", "ld8", "ld9", "ldc",
+ "ldi", "lhp0", "lhp1", "lhp2",
+ "lhs", "lm0", "lm1", "lpp",
+ "lpw0", "lpw1", "lpw2", "lsc0",
+ "lsc1", "lsck", "lsda", "lsdi",
+ "lspi", "lvp0", "lvp1", "lvs";
+ nvidia,function = "displaya";
+ };
+
+ gmi {
+ nvidia,pins = "ata", "atc", "atd", "ate",
+ "gmb", "irrx", "irtx";
+ nvidia,function = "gmi";
+ };
+
+ hdmi {
+ nvidia,pins = "hdint";
+ nvidia,function = "hdmi";
+ };
+
+ i2c {
+ nvidia,pins = "i2cp", "rm";
+ nvidia,function = "i2c";
+ };
+
+ i2c2 {
+ nvidia,pins = "pta";
+ nvidia,function = "i2c2";
+ };
+
+ i2c3 {
+ nvidia,pins = "dtf";
+ nvidia,function = "i2c3";
+ };
+
+ kbc {
+ nvidia,pins = "kbca", "kbcb", "kbcc", "kbce",
+ "kbcf";
+ nvidia,function = "kbc";
+ };
+
+ owr {
+ nvidia,pins = "owc";
+ nvidia,function = "owr";
+ };
+
+ plla-out {
+ nvidia,pins = "cdev1";
+ nvidia,function = "plla_out";
+ };
+
+ pllp-out4 {
+ nvidia,pins = "cdev2";
+ nvidia,function = "pllp_out4";
+ };
+
+ pwm {
+ nvidia,pins = "gpu";
+ nvidia,function = "pwm";
+ };
+
+ pwr-on {
+ nvidia,pins = "pmc";
+ nvidia,function = "pwr_on";
+ };
+
+ rtck {
+ nvidia,pins = "gpu7";
+ nvidia,function = "rtck";
+ };
+
+ sdio1 {
+ nvidia,pins = "sdio1";
+ nvidia,function = "sdio1";
+ };
+
+ sdio2 {
+ nvidia,pins = "kbcd";
+ nvidia,function = "sdio2";
+ };
+
+ sdio3 {
+ nvidia,pins = "sdb", "sdc", "sdd", "slxa",
+ "slxd", "slxk", "slxc";
+ nvidia,function = "sdio3";
+ };
+
+ sdio4 {
+ nvidia,pins = "atb", "gma", "gme";
+ nvidia,function = "sdio4";
+ };
+
+ spi1 {
+ nvidia,pins = "uda";
+ nvidia,function = "spi1";
+ };
+
+ spi2 {
+ nvidia,pins = "spia", "spib", "spic";
+ nvidia,function = "spi2";
+ };
+
+ spi2-alt {
+ nvidia,pins = "spid", "spie", "spig", "spih";
+ nvidia,function = "spi2_alt";
+ };
+
+ uarta {
+ nvidia,pins = "uaa", "uab";
+ nvidia,function = "uarta";
+ };
+
+ uartc {
+ nvidia,pins = "uca", "ucb";
+ nvidia,function = "uartc";
+ };
+
+ uartd {
+ nvidia,pins = "gmc";
+ nvidia,function = "uartd";
+ };
+
+ vi {
+ nvidia,pins = "dtc", "dtd";
+ nvidia,function = "vi";
+ };
+
+ vi-sensor-clk {
+ nvidia,pins = "csus";
+ nvidia,function = "vi_sensor_clk";
+ };
+
+ conf-lsda {
+ nvidia,pins = "lsda", "owc";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
+ conf-ata {
+ nvidia,pins = "ata", "dtf", "gmb", "gmc",
+ "i2cp", "irrx", "kbca", "kbcc",
+ "kbcd", "kbce", "kbcf", "lcsn",
+ "ldc", "pta", "rm", "sdc",
+ "sdd", "spie", "spif", "spig",
+ "spih", "uaa", "uad", "uca",
+ "ucb", "pmce";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ conf-crtp {
+ nvidia,pins = "crtp", "gpv", "hdint", "lhs",
+ "lm0", "lpw0", "lpw1", "lpw2",
+ "lsc1", "lsck", "lspi", "lvs",
+ "slxa", "slxd", "spdi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
+ conf-atb {
+ nvidia,pins = "atb", "atc", "atd", "ate",
+ "cdev1", "cdev2", "csus", "dap1",
+ "dap2", "dap3", "dap4", "ddc",
+ "dta", "dtb", "dte", "gma",
+ "gmd", "gme", "gpu", "gpu7",
+ "irtx", "kbcb", "lm1", "lsc0",
+ "lsdi", "lvp0", "pmc", "sdb",
+ "sdio1", "slxc", "spdo", "spia",
+ "spib", "spic", "uab", "uac",
+ "uda", "ck32", "ddrc", "pmca",
+ "pmcb", "pmcc", "pmcd", "xm2c",
+ "xm2d";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ conf-dtc {
+ nvidia,pins = "dtc", "dtd";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
+ conf-ld0 {
+ nvidia,pins = "ld0", "ld1", "ld2", "ld3",
+ "ld4", "ld5", "ld6", "ld7",
+ "ld8", "ld9", "ld10", "ld11",
+ "ld12", "ld13", "ld14", "ld15",
+ "ld16", "ld17", "ldi", "lhp0",
+ "lhp1", "lhp2", "lpp", "lvp1",
+ "slxk", "spid";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ drive-sdio1 {
+ nvidia,pins = "drive_sdio1", "drive_vi1";
+ nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+ nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+ nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+ nvidia,pull-down-strength = <31>;
+ nvidia,pull-up-strength = <31>;
+ nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+ nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+ };
+
+ drive-i2c {
+ nvidia,pins = "drive_dbg", "drive_ddc", "drive_at1",
+ "drive_vi2", "drive_ao1";
+ nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+ nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+ nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+ nvidia,pull-down-strength = <31>;
+ nvidia,pull-up-strength = <31>;
+ nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+ nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+ };
+
+ drive-dap {
+ nvidia,pins = "drive_dap2", "drive_dap3";
+ nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+ nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+ nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+ nvidia,pull-down-strength = <46>;
+ nvidia,pull-up-strength = <46>;
+ nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+ nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+ };
+ };
+ };
+
+ uartb: serial at 70006040 {
+ clocks = <&tegra_car 7>;
+ status = "okay";
+ };
+
+ pwr_i2c: i2c at 7000d000 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ pmic: max8907 at 3c {
+ compatible = "maxim,max8907";
+ reg = <0x3c>;
+
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ maxim,system-power-controller;
+
+ regulators {
+ vdd_1v8_vio: sd3 {
+ regulator-name = "vcc_1v8_io";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ iovcc_1v8_lcd: ldo3 {
+ regulator-name = "vcc_1v8_lcd";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ };
+
+ avdd_3v3_usb: ldo4 {
+ regulator-name = "avdd_3v3_usb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vcore_emmc: ldo5 {
+ regulator-name = "vcc_2v8_emmc";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-boot-on;
+ };
+
+ vdd_usd: ldo12 {
+ regulator-name = "vcc_2v8_sdio";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-boot-on;
+ };
+
+ vcc_2v8_lcd: ldo14 {
+ regulator-name = "vcc_2v8_lcd";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-boot-on;
+ };
+ };
+ };
+ };
+
+ dcdc_i2c: i2c-5 {
+ compatible = "i2c-gpio";
+
+ sda-gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpio TEGRA_GPIO(Q, 1) GPIO_ACTIVE_HIGH>;
+
+ i2c-gpio,delay-us = <5>;
+ i2c-gpio,timeout-ms = <100>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ aat2870: led-controller at 60 {
+ compatible = "skyworks,aat2870";
+ reg = <0x60>;
+
+ enable-gpios = <&gpio TEGRA_GPIO(R, 3) GPIO_ACTIVE_HIGH>;
+
+ backlight {
+ current-max-microamp = <27900000>;
+ };
+ };
+ };
+
+ micro_usb: usb at c5000000 {
+ status = "okay";
+ dr_mode = "otg";
+ };
+
+ usb-phy at c5000000 {
+ status = "okay";
+ vbus-supply = <&avdd_3v3_usb>;
+ };
+
+ sdmmc3: sdhci at c8000400 {
+ status = "okay";
+ bus-width = <4>;
+
+ cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+
+ vmmc-supply = <&vdd_usd>;
+ vqmmc-supply = <&vdd_1v8_vio>;
+ };
+
+ sdmmc4: sdhci at c8000600 {
+ status = "okay";
+ bus-width = <8>;
+ non-removable;
+
+ vmmc-supply = <&vcore_emmc>;
+ vqmmc-supply = <&vdd_1v8_vio>;
+ };
+
+ /* 32KHz oscillator which is used by PMC */
+ clk32k_in: clock-32k-in {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "ref-oscillator";
+ };
+
+ bridge: cpu-bridge {
+ compatible = "nvidia,tegra-8bit-cpu";
+
+ dc-gpios = <&gpio TEGRA_GPIO(N, 6) GPIO_ACTIVE_HIGH>;
+ rw-gpios = <&gpio TEGRA_GPIO(B, 3) GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+
+ data-gpios = <&gpio TEGRA_GPIO(E, 0) GPIO_ACTIVE_HIGH>,
+ <&gpio TEGRA_GPIO(E, 1) GPIO_ACTIVE_HIGH>,
+ <&gpio TEGRA_GPIO(E, 2) GPIO_ACTIVE_HIGH>,
+ <&gpio TEGRA_GPIO(E, 3) GPIO_ACTIVE_HIGH>,
+ <&gpio TEGRA_GPIO(E, 4) GPIO_ACTIVE_HIGH>,
+ <&gpio TEGRA_GPIO(E, 5) GPIO_ACTIVE_HIGH>,
+ <&gpio TEGRA_GPIO(E, 6) GPIO_ACTIVE_HIGH>,
+ <&gpio TEGRA_GPIO(E, 7) GPIO_ACTIVE_HIGH>;
+
+ nvidia,init-sequence = <0x0000002c 0x0 0x0 0x00005000>;
+
+ panel {
+ /*
+ * There are 2 rev of P990. One has Hitachi TX10D07VM0BAA
+ * panel and other has LG LH400WV3-SD04 panel. We are using
+ * Hitachi here but it is dynamically adjusted for the
+ * correct compatible.
+ */
+ compatible = "hit,tx10d07vm0baa";
+
+ reset-gpios = <&gpio TEGRA_GPIO(V, 7) GPIO_ACTIVE_LOW>;
+
+ avci-supply = <&vcc_2v8_lcd>;
+ iovcc-supply = <&iovcc_1v8_lcd>;
+
+ backlight = <&aat2870>;
+
+ port {
+ panel_input: endpoint {
+ remote-endpoint = <&bridge_output>;
+ };
+ };
+ };
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+
+ bridge_input: endpoint {
+ remote-endpoint = <&dpi_output>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+
+ bridge_output: endpoint {
+ remote-endpoint = <&panel_input>;
+ };
+ };
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ key-power {
+ label = "Power";
+ gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_ENTER>;
+ };
+
+ key-volume-up {
+ label = "Volume Up";
+ gpios = <&gpio TEGRA_GPIO(G, 1) GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_UP>;
+ };
+
+ key-volume-down {
+ label = "Volume Down";
+ gpios = <&gpio TEGRA_GPIO(G, 0) GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_DOWN>;
+ };
+ };
+
+ vdd_3v3_vbat: regulator-vbat {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_vbat";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
diff --git a/arch/arm/mach-tegra/tegra20/Kconfig b/arch/arm/mach-tegra/tegra20/Kconfig
index a79fdc25650..bedbedade7b 100644
--- a/arch/arm/mach-tegra/tegra20/Kconfig
+++ b/arch/arm/mach-tegra/tegra20/Kconfig
@@ -54,6 +54,10 @@ config TARGET_SEABOARD
select TEGRA_LP0
select TEGRA_PMU
+config TARGET_STAR
+ bool "LG Tegra20 Star board"
+ select BOARD_LATE_INIT
+
config TARGET_TEC
bool "Avionic Design Tamonten Evaluation Carrier"
select BOARD_LATE_INIT
@@ -88,6 +92,7 @@ source "board/compal/paz00/Kconfig"
source "board/acer/picasso/Kconfig"
source "board/avionic-design/plutux/Kconfig"
source "board/nvidia/seaboard/Kconfig"
+source "board/lg/star/Kconfig"
source "board/avionic-design/tec/Kconfig"
source "board/asus/transformer-t20/Kconfig"
source "board/compulab/trimslice/Kconfig"
diff --git a/board/lg/star/Kconfig b/board/lg/star/Kconfig
new file mode 100644
index 00000000000..58523121750
--- /dev/null
+++ b/board/lg/star/Kconfig
@@ -0,0 +1,16 @@
+if TARGET_STAR
+
+config SYS_BOARD
+ default "star"
+
+config SYS_VENDOR
+ default "lg"
+
+config SYS_CONFIG_NAME
+ default "tegra"
+
+config TEGRA_BOARD_STRING
+ string "Default Tegra board name"
+ default "LG Star"
+
+endif
diff --git a/board/lg/star/MAINTAINERS b/board/lg/star/MAINTAINERS
new file mode 100644
index 00000000000..e2d6e904f02
--- /dev/null
+++ b/board/lg/star/MAINTAINERS
@@ -0,0 +1,7 @@
+STAR BOARD
+M: Svyatoslav Ryhel <clamor95 at gmail.com>
+S: Maintained
+F: arch/arm/dts/tegra20-lg-star.dts
+F: board/lg/star/
+F: configs/star_defconfig
+F: doc/board/lg/star.rst
diff --git a/board/lg/star/Makefile b/board/lg/star/Makefile
new file mode 100644
index 00000000000..3e6e9f4e41c
--- /dev/null
+++ b/board/lg/star/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2010-2012
+# NVIDIA Corporation <www.nvidia.com>
+#
+# (C) Copyright 2024
+# Svyatoslav Ryhel <clamor95 at gmail.com>
+
+obj-y += star.o
diff --git a/board/lg/star/star.c b/board/lg/star/star.c
new file mode 100644
index 00000000000..dc593754101
--- /dev/null
+++ b/board/lg/star/star.c
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2023
+ * Svyatoslav Ryhel <clamor95 at gmail.com>
+ */
+
+#include <dm.h>
+#include <dm/root.h>
+#include <fdt_support.h>
+#include <log.h>
+#include <spl_gpio.h>
+
+static int star_fix_panel(void *fdt)
+{
+ int panel_offset, ret;
+
+ /* Patch panel compatible */
+ spl_gpio_input(NULL, TEGRA_GPIO(J, 5));
+ if (spl_gpio_get_value(NULL, TEGRA_GPIO(J, 5))) {
+ panel_offset = fdt_node_offset_by_compatible(fdt, -1,
+ "hit,tx10d07vm0baa");
+ if (panel_offset < 0) {
+ log_debug("%s: panel node not found\n", __func__);
+ return panel_offset;
+ }
+
+ ret = fdt_setprop_string(fdt, panel_offset, "compatible",
+ "lg,lh400wv3-sd04");
+ if (ret) {
+ log_debug("%s: panel comapible patch failed\n", __func__);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+void pinmux_init(void)
+{
+ void *fdt = (void *)gd->fdt_blob;
+
+ star_fix_panel(fdt);
+}
+
+#if IS_ENABLED(CONFIG_OF_LIBFDT) && IS_ENABLED(CONFIG_OF_BOARD_SETUP)
+int ft_board_setup(void *fdt, struct bd_info *bd)
+{
+ return star_fix_panel(fdt);
+}
+#endif
diff --git a/board/lg/star/star.env b/board/lg/star/star.env
new file mode 100644
index 00000000000..f2bf298a997
--- /dev/null
+++ b/board/lg/star/star.env
@@ -0,0 +1,15 @@
+#include <env/nvidia/prod_upd.env>
+
+button_cmd_0_name=Volume Down
+button_cmd_0=bootmenu
+partitions=name=emmc,start=0,size=-,uuid=${uuid_gpt_rootfs}
+boot_dev=1
+
+bootmenu_0=mount internal storage=usb start && ums 0 mmc 0; bootmenu
+bootmenu_1=mount external storage=usb start && ums 0 mmc 1; bootmenu
+bootmenu_2=fastboot=echo Starting Fastboot protocol ...; fastboot usb 0; bootmenu
+bootmenu_3=update bootloader=run flash_uboot
+bootmenu_4=reboot RCM=enterrcm
+bootmenu_5=reboot=reset
+bootmenu_6=power off=poweroff
+bootmenu_delay=-1
diff --git a/configs/star_defconfig b/configs/star_defconfig
new file mode 100644
index 00000000000..f0574b077ac
--- /dev/null
+++ b/configs/star_defconfig
@@ -0,0 +1,93 @@
+CONFIG_ARM=y
+CONFIG_ARCH_TEGRA=y
+CONFIG_SUPPORT_PASSING_ATAGS=y
+CONFIG_CMDLINE_TAG=y
+CONFIG_INITRD_TAG=y
+CONFIG_TEXT_BASE=0x00110000
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_ENV_SOURCE_FILE="star"
+CONFIG_ENV_SIZE=0x3000
+CONFIG_ENV_OFFSET=0xFFFFD000
+CONFIG_DEFAULT_DEVICE_TREE="tegra20-lg-star"
+CONFIG_SPL_STACK=0xffffc
+CONFIG_SPL_TEXT_BASE=0x00108000
+CONFIG_SYS_LOAD_ADDR=0x2000000
+CONFIG_TEGRA20=y
+CONFIG_TARGET_STAR=y
+CONFIG_TEGRA_ENABLE_UARTB=y
+CONFIG_CMD_EBTUPDATE=y
+CONFIG_BUTTON_CMD=y
+CONFIG_BOOTDELAY=0
+CONFIG_AUTOBOOT_KEYED=y
+CONFIG_AUTOBOOT_KEYED_CTRLC=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_SYSTEM_SETUP=y
+CONFIG_BOOTCOMMAND="bootflow scan; echo 'Boot configuration not found... Power off in 3 sec'; sleep 3; poweroff"
+CONFIG_SYS_PBSIZE=2085
+CONFIG_SPL_FOOTPRINT_LIMIT=y
+CONFIG_SPL_MAX_FOOTPRINT=0x8000
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
+CONFIG_SPL_SYS_MALLOC=y
+CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
+CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x90000
+CONFIG_SPL_SYS_MALLOC_SIZE=0x10000
+CONFIG_SYS_PROMPT="Tegra20 (Star) # "
+# CONFIG_CMD_BOOTEFI_BOOTMGR is not set
+CONFIG_CMD_BOOTMENU=y
+# CONFIG_CMD_IMI is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_GPT_RENAME=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_POWEROFF=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_CMD_UMS_ABORT_KEYED=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_PAUSE=y
+CONFIG_CMD_REGULATOR=y
+CONFIG_CMD_EXT4_WRITE=y
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_ENV_OVERWRITE=y
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_SYS_MMC_ENV_PART=2
+CONFIG_BUTTON=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
+CONFIG_FASTBOOT_BUF_ADDR=0x11000000
+CONFIG_FASTBOOT_BUF_SIZE=0x5000000
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=0
+CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
+CONFIG_DM_I2C_GPIO=y
+CONFIG_SYS_I2C_TEGRA=y
+CONFIG_BUTTON_KEYBOARD=y
+CONFIG_DM_PMIC=y
+CONFIG_DM_PMIC_MAX8907=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_MAX8907=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_SYS_NS16550=y
+CONFIG_SYSRESET_MAX8907=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_TEGRA=y
+CONFIG_USB_ULPI_VIEWPORT=y
+CONFIG_USB_ULPI=y
+CONFIG_USB_KEYBOARD=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="LG"
+CONFIG_USB_GADGET_VENDOR_NUM=0x1004
+CONFIG_USB_GADGET_PRODUCT_NUM=0x7100
+CONFIG_CI_UDC=y
+CONFIG_VIDEO=y
+# CONFIG_VIDEO_LOGO is not set
+# CONFIG_VIDEO_BPP8 is not set
+CONFIG_VIDEO_LCD_LG_LH400WV3=y
+CONFIG_VIDEO_LCD_HITACHI_TX10D07VM0BAA=y
+CONFIG_BACKLIGHT_AAT2870=y
+CONFIG_VIDEO_BRIDGE=y
+CONFIG_TEGRA_8BIT_CPU_BRIDGE=y
diff --git a/doc/board/lg/index.rst b/doc/board/lg/index.rst
index 3af3681e0bb..2db0f2374ad 100644
--- a/doc/board/lg/index.rst
+++ b/doc/board/lg/index.rst
@@ -6,4 +6,5 @@ LG
.. toctree::
:maxdepth: 2
+ star
x3_t30
diff --git a/doc/board/lg/star.rst b/doc/board/lg/star.rst
new file mode 100644
index 00000000000..9e480929182
--- /dev/null
+++ b/doc/board/lg/star.rst
@@ -0,0 +1,125 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+U-Boot for the LG Optimus 2X P990
+=================================
+
+``DISCLAMER!`` Moving your device to use U-Boot assumes replacement of the
+vendor bootloader. Vendor Android firmwares will no longer be able to run on
+the device. This replacement IS reversible.
+
+Quick Start
+-----------
+
+- Build U-Boot
+- Process U-Boot
+- Flashing U-Boot into the eMMC
+- Boot
+- Self Upgrading
+
+Build U-Boot
+------------
+
+.. code-block:: bash
+
+ $ export CROSS_COMPILE=arm-none-eabi-
+ $ make star_defconfig
+ $ make
+
+After the build succeeds, you will obtain the final ``u-boot-dtb-tegra.bin``
+image, ready for further processing.
+
+Process U-Boot
+--------------
+
+``DISCLAMER!`` All questions related to the re-crypt work should be asked
+in re-crypt repo issues. NOT HERE!
+
+re-crypt is a tool that processes the ``u-boot-dtb-tegra.bin`` binary into form
+usable by device. This process is required only on the first installation or
+to recover the device in case of a failed update.
+
+Permanent installation can be performed either by using the nv3p protocol or by
+pre-loading just built U-Boot into RAM.
+
+Processing for the NV3P protocol
+********************************
+
+.. code-block:: bash
+
+ $ git clone https://gitlab.com/grate-driver/re-crypt.git
+ $ cd re-crypt # place your u-boot-dtb-tegra.bin here
+ $ ./re-crypt.py --dev star
+
+The script will produce a ``repart-block.bin`` ready to flash.
+
+Processing for pre-loaded U-Boot
+********************************
+
+The procedure is the same, but the ``--split`` argument is used with the
+``re-crypt.py``. The script will produce ``bct.img`` and ``ebt.img`` ready
+to flash.
+
+Flashing U-Boot into the eMMC
+-----------------------------
+
+``DISCLAMER!`` All questions related to NvFlash should be asked in the proper
+place. NOT HERE! Flashing U-Boot will erase all eMMC, so make a backup before!
+
+Permanent installation can be performed either by using the nv3p protocol or by
+pre-loading just built U-Boot into RAM.
+
+Flashing with the NV3P protocol
+*******************************
+
+Nv3p is a custom Nvidia protocol used to recover bricked devices. Devices can
+enter it by pre-loading vendor bootloader with nvflash.
+
+With nv3p, ``repart-block.bin`` is used. It contains BCT and a bootloader in
+encrypted state in form, which can just be written RAW at the start of eMMC.
+
+.. code-block:: bash
+
+ $ ./nvflash_v1.13.87205 --bct star.bct --setbct --odmdata 0xC8000
+ --configfile flash.cfg --bl android_bootloader.bin --sync
+ $ ./utiils/nvflash_v1.13.87205 --resume --rawdevicewrite 0 2048 repart-block.bin
+
+When flashing is done, reboot the device.
+
+Flashing with a pre-loaded U-Boot
+*********************************
+
+U-Boot pre-loaded into RAM acts the same as when it was booted "cold". Currently
+U-Boot supports bootmenu entry fastboot, which allows to write a processed copy
+of U-Boot permanently into eMMC.
+
+While pre-loading U-Boot, hold the ``volume down`` button which will trigger
+the bootmenu. There, select ``fastboot`` using the volume and power buttons.
+After, on host PC, do:
+
+.. code-block:: bash
+
+ $ fastboot flash 0.1 bct.img
+ $ fastboot flash 0.2 ebt.img
+ $ fastboot reboot
+
+Device will reboot.
+
+Boot
+----
+
+To boot Linux, U-Boot will look for an ``extlinux.conf`` on MicroSD and then on
+eMMC. Additionally, if the Volume Down button is pressed while booting, the
+device will enter bootmenu. Bootmenu contains entries to mount MicroSD and eMMC
+as mass storage, fastboot, reboot, reboot RCM, poweroff, enter U-Boot console
+and update bootloader (check the next chapter).
+
+Flashing ``repart-block.bin`` eliminates vendor restrictions on eMMC and allows
+the user to use/partition it in any way the user desires.
+
+Self Upgrading
+--------------
+
+Place your ``u-boot-dtb-tegra.bin`` on the first partition of the MicroSD card
+and insert it into the device. Enter bootmenu, choose update the bootloader
+option with the Power button and U-Boot should update itself. Once the process
+is completed, U-Boot will ask to press any button to reboot.
--
2.43.0
More information about the U-Boot
mailing list