[PATCH 3/3] board: phytec: phycore_am62ax: Update Environment

[Daniel Schultz]

Add fit_addr_r to the environment to allow us to boot from a FIT image.

Increase the maximum Image size from 23 MB to 26 MB by moving the
initramfs start address up. This gives us a bigger ranger to
provide kernel images which are not stripped down too much.

Signed-off-by: Daniel Schultz <d.schultz at phytec.de>
---
 board/phytec/phycore_am62ax/phycore_am62ax.env | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/board/phytec/phycore_am62ax/phycore_am62ax.env b/board/phytec/phycore_am62ax/phycore_am62ax.env
index a0eacd1dfc3..40787b0cbcb 100644
--- a/board/phytec/phycore_am62ax/phycore_am62ax.env
+++ b/board/phytec/phycore_am62ax/phycore_am62ax.env
@@ -10,6 +10,7 @@ fdt_addr_r=0x88000000
 kernel_addr_r=0x82000000
 ramdisk_addr_r=0x88080000
 fdtoverlay_addr_r=0x89000000
+fit_addr_r=0x90000000
 
 fdtfile=CONFIG_DEFAULT_FDT_FILE
 mmcdev=1
@@ -22,4 +23,4 @@ get_cmd=tftp
 
 spi_fdt_addr=0x700000
 spi_image_addr=0x800000
-spi_ramdisk_addr=0x1e00000
+spi_ramdisk_addr=0x2200000
-- 
2.25.1