[PATCH v1 1/3] imx8qxp: capricorn defconfig: collect common Kconfig options
Heiko Schocher
hs at denx.de
Wed Apr 16 11:04:17 CEST 2025
siemens have some defconfigs for different hardware versions,
all based on mainline cxg3 board. For easier updating the
downstream defconfigs, move common settings into new file.
configs/imx8qxp_capricorn.config
Signed-off-by: Heiko Schocher <hs at denx.de>
Signed-off-by: Walter Schweizer <walter.schweizer at siemens.com>
---
board/siemens/capricorn/MAINTAINERS | 1 +
configs/capricorn_cxg3_defconfig | 132 +--------------------------
configs/imx8qxp_capricorn.config | 135 ++++++++++++++++++++++++++++
3 files changed, 140 insertions(+), 128 deletions(-)
create mode 100644 configs/imx8qxp_capricorn.config
diff --git a/board/siemens/capricorn/MAINTAINERS b/board/siemens/capricorn/MAINTAINERS
index 5f467aa9b6e..3b4bd64dd00 100644
--- a/board/siemens/capricorn/MAINTAINERS
+++ b/board/siemens/capricorn/MAINTAINERS
@@ -9,4 +9,5 @@ F: arch/arm/dts/imx8-capricorn-u-boot.dtsi
F: arch/arm/dts/imx8-capricorn.dtsi
F: board/siemens/capricorn/
F: configs/capricorn_cxg3_defconfig
+F: configs/imx8qxp_capricorn.config
F: include/configs/capricorn-common.h
diff --git a/configs/capricorn_cxg3_defconfig b/configs/capricorn_cxg3_defconfig
index 3cc46067f7d..530b1f47695 100644
--- a/configs/capricorn_cxg3_defconfig
+++ b/configs/capricorn_cxg3_defconfig
@@ -1,117 +1,13 @@
-CONFIG_ARM=y
-CONFIG_ARCH_IMX8=y
-CONFIG_TEXT_BASE=0x80020000
-CONFIG_SYS_MALLOC_LEN=0x2800000
-CONFIG_SYS_MALLOC_F_LEN=0x4000
-CONFIG_SPL_GPIO=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_NR_DRAM_BANKS=3
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x200000
-CONFIG_DM_GPIO=y
+#include <configs/imx8qxp_capricorn.config>
+
CONFIG_DEFAULT_DEVICE_TREE="imx8-capricorn-cxg3"
-CONFIG_TARGET_CAPRICORN=y
-CONFIG_SPL_MMC=y
-CONFIG_SPL_SERIAL=y
-CONFIG_SPL_DRIVERS_MISC=y
-CONFIG_SPL_STACK=0x13e000
-CONFIG_SPL_TEXT_BASE=0x100000
-CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x128000
-CONFIG_SPL_BSS_MAX_SIZE=0x1000
-CONFIG_SYS_BOOTM_LEN=0x800000
-CONFIG_SYS_LOAD_ADDR=0x80280000
-CONFIG_SPL=y
-CONFIG_ENV_OFFSET_REDUND=0x202000
CONFIG_IDENT_STRING=" ##v01.06"
-CONFIG_REMAKE_ELF=y
-# CONFIG_EFI_LOADER is not set
-CONFIG_FIT=y
-CONFIG_FIT_EXTERNAL_OFFSET=0x3000
-CONFIG_BOOTDELAY=3
-CONFIG_AUTOBOOT_KEYED=y
-CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\n"
-CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b"
-CONFIG_AUTOBOOT_KEYED_CTRLC=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_SYSTEM_SETUP=y
-CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="if usrbutton; then run flash_self_test; reset; fi;run flash_self;reset;"
-CONFIG_SYS_CBSIZE=2048
-CONFIG_SYS_PBSIZE=2073
-CONFIG_LOG=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_SPL_MAX_SIZE=0x1f000
-CONFIG_SPL_BOARD_INIT=y
-# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
-# CONFIG_SPL_LEGACY_IMAGE_FORMAT is not set
-CONFIG_SPL_LOAD_IMX_CONTAINER=y
-CONFIG_IMX_CONTAINER_CFG="board/siemens/capricorn/uboot-container.cfg"
-CONFIG_SPL_SYS_MALLOC_SIMPLE=y
-# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_HAVE_INIT_STACK=y
-CONFIG_SPL_SYS_MALLOC=y
-CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
-CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x120000
-CONFIG_SPL_SYS_MALLOC_SIZE=0x4000
-CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1040
-CONFIG_SPL_POWER_DOMAIN=y
-CONFIG_SPL_WATCHDOG=y
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PROMPT="U-Boot# "
-CONFIG_CMD_CPU=y
-# CONFIG_BOOTM_NETBSD is not set
-# CONFIG_CMD_EXPORTENV is not set
-# CONFIG_CMD_IMPORTENV is not set
-# CONFIG_CMD_CRC32 is not set
-CONFIG_CMD_CLK=y
-CONFIG_CMD_DM=y
-CONFIG_CMD_FUSE=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_READ=y
-CONFIG_CMD_WDT=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
-CONFIG_SYS_MMC_ENV_PART=2
+
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
CONFIG_USE_ETHPRIME=y
CONFIG_ETHPRIME="eth1"
CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM=y
-CONFIG_BOOTCOUNT_LIMIT=y
-CONFIG_BOOTCOUNT_ENV=y
-CONFIG_BOOTCOUNT_ALTBOOTCMD="run bootcmd"
-CONFIG_SPL_CLK=y
-CONFIG_CLK_IMX8=y
-CONFIG_CPU=y
-CONFIG_MXC_GPIO=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_IMX_LPI2C=y
-CONFIG_LED=y
-CONFIG_LED_GPIO=y
-CONFIG_MISC=y
-CONFIG_SUPPORT_EMMC_BOOT=y
-CONFIG_MMC_IO_VOLTAGE=y
-CONFIG_MMC_UHS_SUPPORT=y
-CONFIG_MMC_HS400_SUPPORT=y
-CONFIG_FSL_USDHC=y
-CONFIG_PHYLIB=y
+
CONFIG_MV88E61XX_SWITCH=y
CONFIG_MV88E61XX_CPU_PORT=5
CONFIG_MV88E61XX_PHY_PORTS=0x7
@@ -119,23 +15,3 @@ CONFIG_DM_ETH_PHY=y
CONFIG_FEC_MXC_SHARE_MDIO=y
CONFIG_FEC_MXC_MDIO_BASE=0x5B050000
CONFIG_FEC_MXC=y
-CONFIG_MII=y
-CONFIG_PHY=y
-CONFIG_NOP_PHY=y
-CONFIG_PINCTRL=y
-CONFIG_SPL_PINCTRL=y
-CONFIG_PINCTRL_IMX8=y
-CONFIG_POWER_DOMAIN=y
-CONFIG_IMX8_POWER_DOMAIN=y
-CONFIG_DM_REGULATOR=y
-CONFIG_DM_REGULATOR_FIXED=y
-CONFIG_DM_REGULATOR_GPIO=y
-CONFIG_SPL_DM_REGULATOR_GPIO=y
-CONFIG_DM_SERIAL=y
-CONFIG_FSL_LPUART=y
-CONFIG_DM_THERMAL=y
-CONFIG_IMX_SCU_THERMAL=y
-# CONFIG_WATCHDOG is not set
-CONFIG_WDT=y
-CONFIG_WDT_SIEMENS_PMIC=y
-CONFIG_SPL_TINY_MEMSET=y
diff --git a/configs/imx8qxp_capricorn.config b/configs/imx8qxp_capricorn.config
new file mode 100644
index 00000000000..f59f2129d56
--- /dev/null
+++ b/configs/imx8qxp_capricorn.config
@@ -0,0 +1,135 @@
+CONFIG_ARM=y
+CONFIG_ARCH_IMX8=y
+CONFIG_TEXT_BASE=0x80020000
+CONFIG_SYS_MALLOC_LEN=0x2800000
+CONFIG_SYS_MALLOC_F_LEN=0x8000
+CONFIG_SPL_GPIO=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_NR_DRAM_BANKS=3
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000
+CONFIG_ENV_SIZE=0x2000
+CONFIG_ENV_OFFSET=0x200000
+CONFIG_ENV_OFFSET_REDUND=0x202000
+CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
+CONFIG_SYS_MMC_ENV_PART=2
+
+CONFIG_DM_GPIO=y
+
+CONFIG_TARGET_CAPRICORN=y
+CONFIG_SPL_MMC=y
+CONFIG_SPL_SERIAL=y
+CONFIG_SPL_DRIVERS_MISC=y
+CONFIG_SPL_STACK=0x13e000
+CONFIG_SPL_TEXT_BASE=0x100000
+CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
+CONFIG_SPL_BSS_START_ADDR=0x128000
+CONFIG_SPL_BSS_MAX_SIZE=0x1000
+CONFIG_SYS_BOOTM_LEN=0x4000000
+CONFIG_SYS_LOAD_ADDR=0x80280000
+CONFIG_SPL=y
+
+CONFIG_REMAKE_ELF=y
+# CONFIG_EFI_LOADER is not set
+# CONFIG_ANDROID_BOOT_IMAGE is not set
+CONFIG_FIT=y
+CONFIG_FIT_EXTERNAL_OFFSET=0x3000
+CONFIG_BOOTDELAY=3
+CONFIG_AUTOBOOT_KEYED=y
+CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\n"
+CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b"
+CONFIG_AUTOBOOT_KEYED_CTRLC=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_SYSTEM_SETUP=y
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="if usrbutton; then run flash_self_test; reset; fi;run flash_self;reset;"
+CONFIG_SYS_CBSIZE=2048
+CONFIG_SYS_PBSIZE=2073
+CONFIG_LOG=y
+CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_MAX_SIZE=0x1f000
+CONFIG_SPL_BOARD_INIT=y
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+# CONFIG_SPL_LEGACY_IMAGE_FORMAT is not set
+CONFIG_SPL_LOAD_IMX_CONTAINER=y
+CONFIG_IMX_CONTAINER_CFG="board/siemens/capricorn/uboot-container.cfg"
+CONFIG_SPL_SYS_MALLOC_SIMPLE=y
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
+CONFIG_SPL_SYS_MALLOC=y
+CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
+CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x120000
+CONFIG_SPL_SYS_MALLOC_SIZE=0x4000
+CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1040
+CONFIG_SPL_POWER_DOMAIN=y
+CONFIG_SPL_WATCHDOG=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="U-Boot# "
+CONFIG_CMD_CPU=y
+# CONFIG_BOOTM_NETBSD is not set
+# CONFIG_CMD_EXPORTENV is not set
+# CONFIG_CMD_IMPORTENV is not set
+# CONFIG_CMD_CRC32 is not set
+# CONFIG_CMD_BIND is not set
+CONFIG_CMD_WDT=y
+CONFIG_CMD_CLK=y
+CONFIG_CMD_DM=y
+CONFIG_CMD_FUSE=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_READ=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_ENV_OVERWRITE=y
+CONFIG_ENV_IS_IN_MMC=y
+
+CONFIG_SPL_DM=y
+CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_BOOTCOUNT_ENV=y
+CONFIG_BOOTCOUNT_ALTBOOTCMD="run bootcmd"
+CONFIG_SPL_CLK=y
+CONFIG_CLK_IMX8=y
+CONFIG_CPU=y
+CONFIG_MXC_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_IMX_LPI2C=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_MISC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_MMC_IO_VOLTAGE=y
+CONFIG_MMC_UHS_SUPPORT=y
+CONFIG_MMC_HS400_SUPPORT=y
+CONFIG_FSL_USDHC=y
+CONFIG_PHYLIB=y
+
+CONFIG_MII=y
+CONFIG_PHY=y
+CONFIG_NOP_PHY=y
+CONFIG_PINCTRL=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_PINCTRL_IMX8=y
+CONFIG_POWER_DOMAIN=y
+CONFIG_IMX8_POWER_DOMAIN=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_SPL_DM_REGULATOR_GPIO=y
+CONFIG_DM_SERIAL=y
+CONFIG_FSL_LPUART=y
+CONFIG_DM_THERMAL=y
+CONFIG_IMX_SCU_THERMAL=y
+# CONFIG_WATCHDOG is not set
+CONFIG_WDT=y
+CONFIG_WDT_SIEMENS_PMIC=y
+CONFIG_SPL_TINY_MEMSET=y
--
2.20.1
More information about the U-Boot
mailing list