[PATCH v2 1/1] Initial support for Wiznet W5500
verdun at hpe.com
verdun at hpe.com
Fri Apr 25 03:07:27 CEST 2025
From: Jean-Marie Verdun <verdun at hpe.com>
Add support for the Wiznet W5500 spi to ethernet controller
Signed-off-by: Jean-Marie Verdun <verdun at hpe.com>
---
drivers/net/Kconfig | 9 +
drivers/net/Makefile | 1 +
drivers/net/w5500.c | 508 +++++++++++++++++++++++++++++++++++++++++++
drivers/net/w5500.h | 135 ++++++++++++
4 files changed, 653 insertions(+)
create mode 100644 drivers/net/w5500.c
create mode 100644 drivers/net/w5500.h
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 4434d364777..8ba8e578971 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -19,6 +19,15 @@ config SPL_DM_ETH
depends on SPL_NET
def_bool y
+config W5500
+ bool "W5500 device driver"
+ depends on SPI
+ help
+ Enable w5500 driver
+
+ Adds support for Wiznet W5500 device. The device must be attached
+ to a SPI bus.
+
config DM_MDIO
bool "Enable Driver Model for MDIO devices"
depends on PHYLIB
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 67bba3a8536..52d0648c33f 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -102,6 +102,7 @@ obj-$(CONFIG_SUN4I_EMAC) += sunxi_emac.o
obj-$(CONFIG_SUN8I_EMAC) += sun8i_emac.o
obj-$(CONFIG_TSEC_ENET) += tsec.o fsl_mdio.o
obj-$(CONFIG_TULIP) += dc2114x.o
+obj-$(CONFIG_W5500) += w5500.o
obj-$(CONFIG_VSC7385_ENET) += vsc7385.o
obj-$(CONFIG_XILINX_AXIEMAC) += xilinx_axi_emac.o
obj-$(CONFIG_XILINX_AXIMRMAC) += xilinx_axi_mrmac.o
diff --git a/drivers/net/w5500.c b/drivers/net/w5500.c
new file mode 100644
index 00000000000..fa9eaf4797b
--- /dev/null
+++ b/drivers/net/w5500.c
@@ -0,0 +1,508 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright Hewlett Packard Enterprise Development LP.
+ *
+ * Jean-Marie Verdun <verdun at hpe.com>
+ *
+ * inspired from the linux kernel driver from
+ * Copyright (C) 2006-2008 WIZnet Co.,Ltd.
+ * Copyright (C) 2012 Mike Sinkovsky <msink at permonline.ru>
+ *
+ * available at
+ *
+ * https://github.com/torvalds/linux/blob/master/drivers/net/ethernet/wiznet/w5100.c
+ *
+ * Datasheet:
+ * http://www.wiznet.co.kr/wp-content/uploads/wiznethome/Chip/W5100/Document/W5100_Datasheet_v1.2.6.pdf
+ * http://wiznethome.cafe24.com/wp-content/uploads/wiznethome/Chip/W5200/Documents/W5200_DS_V140E.pdf
+ * http://wizwiki.net/wiki/lib/exe/fetch.php?media=products:w5500:w5500_ds_v106e_141230.pdf
+ *
+ */
+
+#include <dm.h>
+#include <log.h>
+#include <malloc.h>
+#include <spi.h>
+#include <net.h>
+#include "w5500.h"
+#include <asm/global_data.h>
+#include <linux/delay.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+static int w5500_command(struct udevice *dev, u8 cmd)
+{
+ struct eth_w5500_priv *priv = dev_get_priv(dev);
+ u16 counter = 0;
+
+ w5500_spi_write(dev, W5100_S0_CR(priv), cmd);
+ while (w5500_spi_read(dev, W5100_S0_CR(priv)) != 0) {
+ counter++;
+ if (counter == 500)
+ return -EIO;
+ udelay(10);
+ }
+ return 0;
+}
+
+/*
+ * Set priv ptr
+ *
+ * priv - priv void ptr to store in the device
+ */
+void w5500_eth_set_priv(int index, void *priv)
+{
+ struct udevice *dev;
+ struct eth_w5500_priv *dev_priv;
+ int ret;
+
+ ret = uclass_get_device(UCLASS_ETH, index, &dev);
+ if (ret)
+ return;
+
+ dev_priv = dev_get_priv(dev);
+
+ dev_priv->priv = priv;
+}
+
+static int w5500_eth_start(struct udevice *dev)
+{
+ struct eth_w5500_priv *priv = dev_get_priv(dev);
+
+ debug("eth_w5500: Start\n");
+
+ u8 mode = S0_MR_MACRAW;
+
+ if (!priv->promisc)
+ mode |= W5500_S0_MR_MF;
+
+ w5500_spi_write(dev, W5100_S0_MR(priv), mode);
+ w5500_command(dev, S0_CR_OPEN);
+ priv->offset = 0;
+ return 0;
+}
+
+static int w5500_eth_send(struct udevice *dev, void *packet, int length)
+{
+ struct eth_w5500_priv *priv = dev_get_priv(dev);
+ u16 offset;
+
+ if (priv->disabled)
+ return 0;
+
+ offset = w5500_spi_read16(dev, W5100_S0_TX_WR(priv));
+ w5500_writebuf(dev, offset, packet, length);
+ w5500_spi_write16(dev, W5100_S0_TX_WR(priv), offset + length);
+ w5500_command(dev, S0_CR_SEND);
+ return 0;
+}
+
+static int w5500_eth_recv(struct udevice *dev, int flags, u8 **packetp)
+{
+ struct eth_w5500_priv *priv = dev_get_priv(dev);
+ u16 rx_len;
+ u16 offset;
+ u8 data[9000];
+ u16 tmp;
+
+ u16 rx_buf_len = w5500_spi_read16(dev, W5100_S0_RX_RSR(priv));
+
+ while ((tmp =
+ w5500_spi_read16(dev, W5100_S0_RX_RSR(priv))) != rx_buf_len)
+ rx_buf_len = tmp;
+
+ if (rx_buf_len == 0)
+ return 0;
+
+ offset = w5500_spi_read16(dev, W5100_S0_RX_RD(priv));
+ rx_len = rx_buf_len - 2;
+ w5500_readbuf(dev, offset + 2, data, rx_len);
+ w5500_spi_write16(dev, W5100_S0_RX_RD(priv), offset + 2 + rx_len);
+ w5500_command(dev, S0_CR_RECV);
+ *packetp = data;
+
+ priv->offset += rx_buf_len;
+ return rx_len;
+}
+
+static int w5500_eth_free_pkt(struct udevice *dev, u8 *packet, int length)
+{
+ struct eth_w5500_priv *priv = dev_get_priv(dev);
+ int i;
+
+ if (!priv->recv_packets)
+ return 0;
+
+ --priv->recv_packets;
+ for (i = 0; i < priv->recv_packets; i++) {
+ priv->recv_packet_length[i] = priv->recv_packet_length[i + 1];
+ memcpy(priv->recv_packet_buffer[i],
+ priv->recv_packet_buffer[i + 1],
+ priv->recv_packet_length[i + 1]);
+ }
+ priv->recv_packet_length[priv->recv_packets] = 0;
+
+ return 0;
+}
+
+static void w5500_eth_stop(struct udevice *dev)
+{
+ debug("eth_w5500: Stop\n");
+}
+
+static int xfer(struct udevice *dev, void *dout, unsigned int bout, void *din,
+ unsigned int bin)
+{
+ /* Ok the xfer function in uboot is symmetrical
+ * (write and read operation happens at the same time)
+ * w5500 requires bytes send followed by receive operation on the MISO line
+ * So we need to create a buffer which contain bout+bin bytes and pass the various
+ * pointer to the xfer function
+ */
+
+ struct udevice *bus = dev_get_parent(dev);
+ u8 buffin[BUFFER_SZ];
+ u8 buffout[BUFFER_SZ];
+
+ if ((bout + bin) < BUFFER_SZ) {
+ for (int i = 0; i < bout; i++) {
+ buffout[i] = ((u8 *)(dout))[i];
+ buffin[i] = 0;
+ }
+ for (int i = bout; i < (bin + bout); i++) {
+ buffin[i] = 0;
+ buffout[i] = 0;
+ }
+ if (bus) {
+ dm_spi_xfer(dev, 8 * (bout + bin), buffout, buffin,
+ SPI_XFER_BEGIN | SPI_XFER_END);
+ for (int i = bout; i < (bin + bout); i++)
+ ((u8 *)(din))[bin + bout - i - 1] = buffin[i];
+ } else {
+ return -1;
+ }
+ }
+ return 0;
+}
+
+static int w5500_spi_write(struct udevice *dev, u32 addr, u8 data)
+{
+ u8 bank;
+ u8 din = 0;
+ u8 cmd[4];
+
+ bank = (addr >> 16);
+
+ if (bank > 0)
+ bank = bank << 3;
+
+ cmd[0] = (addr >> 8) & 0xff;
+ cmd[1] = addr & 0xff;
+ cmd[2] = bank | 0x4;
+ cmd[3] = data;
+
+ return xfer(dev, cmd, sizeof(cmd), &din, 0);
+}
+
+static int w5500_spi_read(struct udevice *dev, u32 addr)
+{
+ u8 bank;
+ u8 cmd[3];
+ u8 data;
+ int ret;
+
+ bank = (addr >> 16);
+
+ if (bank > 0)
+ bank = bank << 3;
+
+ cmd[0] = addr >> 8;
+ cmd[1] = addr & 0xff;
+ cmd[2] = bank;
+
+ ret = xfer(dev, cmd, sizeof(cmd), &data, 1);
+
+ return data;
+}
+
+static int w5500_spi_read16(struct udevice *dev, u32 addr)
+{
+ u16 data;
+ int ret;
+ u8 bank;
+ u8 cmd[3];
+
+ bank = (addr >> 16);
+
+ if (bank > 0)
+ bank = bank << 3;
+
+ cmd[0] = addr >> 8;
+ cmd[1] = addr & 0xff;
+ cmd[2] = bank;
+
+ ret = xfer(dev, cmd, sizeof(cmd), &data, 2);
+
+ return data;
+}
+
+static int w5500_spi_write16(struct udevice *dev, u32 addr, u16 data)
+{
+ int ret;
+ u8 buf[2];
+
+ buf[0] = data >> 8;
+ buf[1] = data & 0xff;
+
+ ret = w5500_writebulk(dev, addr, &buf[0], 2);
+
+ return ret;
+}
+
+static int w5500_readbulk(struct udevice *dev, u32 addr, u8 *buf, int len)
+{
+ int i;
+ u8 data[9000];
+ u8 bank;
+ u8 cmd[3];
+ int ret;
+
+ bank = (addr >> 16);
+
+ if (bank > 0)
+ bank = bank << 3;
+
+ cmd[0] = addr >> 8;
+ cmd[1] = addr & 0xff;
+ cmd[2] = bank;
+
+ ret = xfer(dev, cmd, sizeof(cmd), &data, len);
+
+ for (i = 0; i < len; i++)
+ buf[(len - 1) - i] = data[i];
+
+ return 0;
+}
+
+static int w5500_writebulk(struct udevice *dev, u32 addr, const u8 *buf,
+ int len)
+{
+ int i;
+ u8 bank;
+ u8 cmd[9000];
+ u8 din = 0;
+
+ bank = (addr >> 16);
+ if (bank > 0)
+ bank = bank << 3;
+
+ cmd[0] = (addr >> 8) & 0xff;
+ cmd[1] = addr & 0xff;
+ cmd[2] = bank | 0x4;
+
+ for (i = 0; i < len; i++)
+ cmd[i + 3] = buf[i];
+
+ return xfer(dev, cmd, len + 3, &din, 0);
+}
+
+static int w5500_writebuf(struct udevice *dev, u16 offset, const u8 *buf,
+ int len)
+{
+ u32 addr;
+ int ret;
+ int remain = 0;
+ struct eth_w5500_priv *priv = dev_get_priv(dev);
+ const u32 mem_start = priv->s0_tx_buf;
+ const u16 mem_size = priv->s0_tx_buf_size;
+
+ offset %= mem_size;
+ addr = mem_start + offset;
+
+ if (offset + len > mem_size) {
+ remain = (offset + len) % mem_size;
+ len = mem_size - offset;
+ }
+
+ ret = w5500_writebulk(dev, addr, buf, len);
+
+ if (ret || !remain)
+ return ret;
+
+ return w5500_writebulk(dev, mem_start, buf + len, remain);
+}
+
+static int w5500_readbuf(struct udevice *dev, u16 offset, u8 *buf, int len)
+{
+ u32 addr;
+ int remain = 0;
+ int ret;
+ struct eth_w5500_priv *priv = dev_get_priv(dev);
+ const u32 mem_start = priv->s0_rx_buf;
+ const u16 mem_size = priv->s0_rx_buf_size;
+
+ offset %= mem_size;
+ addr = mem_start + offset;
+
+ if (offset + len > mem_size) {
+ remain = (offset + len) % mem_size;
+ len = mem_size - offset;
+ }
+
+ ret = w5500_readbulk(dev, addr, buf, len);
+ if (ret || !remain)
+ return ret;
+
+ return w5500_readbulk(dev, mem_start, buf + len, remain);
+}
+
+static int w5500_eth_write_hwaddr(struct udevice *dev)
+{
+ struct eth_pdata *pdata = dev_get_plat(dev);
+ struct eth_w5500_priv *priv = dev_get_priv(dev);
+ u8 eth[6];
+ u8 mode;
+
+ if (memcmp(priv->host_hwaddr, pdata->enetaddr, ARP_HLEN) != 0) {
+ memcpy(priv->host_hwaddr, pdata->enetaddr, ARP_HLEN);
+ w5500_writebulk(dev, W5100_SHAR, priv->host_hwaddr, ARP_HLEN);
+ }
+
+ w5500_readbulk(dev, W5100_SHAR, eth, 6);
+
+ mode = 0x84;
+ w5500_spi_write(dev, W5100_S0_MR(priv), mode);
+ w5500_command(dev, S0_CR_OPEN);
+ w5500_enable_intr(dev);
+
+ return 0;
+}
+
+static const struct eth_ops w5500_eth_ops = {
+ .start = w5500_eth_start,
+ .send = w5500_eth_send,
+ .recv = w5500_eth_recv,
+ .free_pkt = w5500_eth_free_pkt,
+ .stop = w5500_eth_stop,
+ .write_hwaddr = w5500_eth_write_hwaddr,
+};
+
+static int w5500_eth_remove(struct udevice *dev)
+{
+ return 0;
+}
+
+int w5500_eth_of_to_plat(struct udevice *dev)
+{
+ struct eth_pdata *pdata = dev_get_plat(dev);
+ struct eth_w5500_priv *priv = dev_get_priv(dev);
+ u8 mac[8];
+ u32 ret;
+ ofnode remote;
+ const void *ptr;
+ int size;
+
+ size = 0;
+ ptr = ofnode_read_prop(remote, "local-mac-address", &size);
+ if (size == 6) {
+ mac[0] = ((u8 *)ptr)[0];
+ mac[1] = ((u8 *)ptr)[1];
+ mac[2] = ((u8 *)ptr)[2];
+ mac[3] = ((u8 *)ptr)[4];
+ mac[4] = ((u8 *)ptr)[5];
+ mac[5] = ((u8 *)ptr)[5];
+ } else {
+ return ret;
+ }
+
+ memcpy(pdata->enetaddr, (void *)mac, ARP_HLEN);
+
+ priv->disabled = false;
+
+ return 0;
+}
+
+static void w5500_socket_intr_mask(struct udevice *dev, u8 mask)
+{
+ u32 imr;
+
+ imr = W5500_SIMR;
+
+ w5500_spi_write(dev, imr, mask);
+}
+
+static void w5500_disable_intr(struct udevice *dev)
+{
+ w5500_socket_intr_mask(dev, 0);
+}
+
+static void w5500_enable_intr(struct udevice *dev)
+{
+ w5500_socket_intr_mask(dev, IR_S0);
+}
+
+int w5500_eth_probe(struct udevice *dev)
+{
+ struct eth_w5500_priv *priv = dev_get_priv(dev);
+ int i;
+ u16 rtr;
+ u8 cmd[3];
+
+ if (device_get_uclass_id(dev->parent) != UCLASS_SPI) {
+ debug("Error device not attached to a SPI controlled\n");
+ return -ENODEV;
+ }
+
+ cmd[0] = 0x00;
+ cmd[1] = 0x19;
+ cmd[2] = 0;
+
+ w5500_spi_write(dev, W5100_MR, MR_RST);
+ w5500_spi_write(dev, W5100_MR, MR_PB);
+
+ rtr = W5500_RTR;
+ if (w5500_spi_read16(dev, rtr) != RTR_DEFAULT) {
+ debug("RTR issue in probe .... %x\n",
+ w5500_spi_read16(dev, rtr));
+ return -ENODEV;
+ }
+
+ w5500_disable_intr(dev);
+
+ /* Configure internal RX memory as 16K RX buffer and
+ * internal TX memory as 16K TX buffer
+ */
+
+ w5500_spi_write(dev, W5500_Sn_RXMEM_SIZE(0), 0x10);
+ w5500_spi_write(dev, W5500_Sn_TXMEM_SIZE(0), 0x10);
+
+ for (i = 1; i < 8; i++) {
+ w5500_spi_write(dev, W5500_Sn_RXMEM_SIZE(i), 0);
+ w5500_spi_write(dev, W5500_Sn_TXMEM_SIZE(i), 0);
+ }
+
+ priv->s0_regs = W5500_S0_REGS;
+ priv->s0_tx_buf = W5500_TX_MEM_START;
+ priv->s0_tx_buf_size = W5500_TX_MEM_SIZE;
+ priv->s0_rx_buf = W5500_RX_MEM_START;
+ priv->s0_rx_buf_size = W5500_RX_MEM_SIZE;
+
+ priv->offset = 0;
+ return 0;
+}
+
+static const struct udevice_id w5500_eth_ids[] = {
+ {.compatible = "wiznet,w5500" },
+ { }
+};
+
+U_BOOT_DRIVER(eth_w5500) = {
+ .name = "eth_w5500",
+ .id = UCLASS_ETH,
+ .of_match = w5500_eth_ids,
+ .of_to_plat = w5500_eth_of_to_plat,
+ .probe = w5500_eth_probe,
+ .remove = w5500_eth_remove,
+ .ops = &w5500_eth_ops,
+ .priv_auto = sizeof(struct eth_w5500_priv),
+ .plat_auto = sizeof(struct eth_pdata),
+};
diff --git a/drivers/net/w5500.h b/drivers/net/w5500.h
new file mode 100644
index 00000000000..f1fec72d4ab
--- /dev/null
+++ b/drivers/net/w5500.h
@@ -0,0 +1,135 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2025 Hewlett Packard Enterprise LLC
+ *
+ * Jean-Marie Verdun <verdun at hpe.com>
+ */
+
+#ifndef __ETH_H
+#define __ETH_H
+
+#include <net.h>
+
+#define BUFFER_SZ 16384
+#define W5100_SPI_WRITE_OPCODE 0xf0
+#define W5100_SPI_READ_OPCODE 0x0f
+#define W5100_SHAR 0x0009 /* Source MAC address */
+#define W5500_S0_REGS 0x10000
+#define S0_REGS(priv) ((priv)->s0_regs)
+#define W5100_MR 0x0000 /* Mode Register */
+#define MR_RST 0x80 /* S/W reset */
+#define MR_PB 0x10 /* Ping block */
+
+#define W5100_Sn_MR 0x0000 /* Sn Mode Register */
+#define W5100_Sn_CR 0x0001 /* Sn Command Register */
+#define W5100_Sn_IR 0x0002 /* Sn Interrupt Register */
+#define W5100_Sn_SR 0x0003 /* Sn Status Register */
+#define W5100_Sn_TX_FSR 0x0020 /* Sn Transmit free memory size */
+#define W5100_Sn_TX_RD 0x0022 /* Sn Transmit memory read pointer */
+#define W5100_Sn_TX_WR 0x0024 /* Sn Transmit memory write pointer */
+#define W5100_Sn_RX_RSR 0x0026 /* Sn Receive free memory size */
+#define W5100_Sn_RX_RD 0x0028 /* Sn Receive memory read pointer */
+
+#define W5100_S0_MR(priv) (S0_REGS(priv) + W5100_Sn_MR)
+
+#define S0_MR_MACRAW 0x04 /* MAC RAW mode */
+#define S0_MR_MF 0x40 /* MAC Filter for W5100 and W5200 */
+#define W5500_S0_MR_MF 0x80 /* MAC Filter for W5500 */
+#define W5100_S0_MR(priv) (S0_REGS(priv) + W5100_Sn_MR)
+
+#define S0_MR_MACRAW 0x04 /* MAC RAW mode */
+#define S0_MR_MF 0x40 /* MAC Filter for W5100 and W5200 */
+#define W5500_S0_MR_MF 0x80 /* MAC Filter for W5500 */
+
+/*
+ * W5100 and W5200 common registers about the same with the W5500
+ */
+#define W5100_IMR 0x0016 /* Interrupt Mask Register */
+#define IR_S0 0x01 /* S0 interrupt */
+#define W5100_RTR 0x0017 /* Retry Time-value Register */
+#define RTR_DEFAULT 2000 /* =0x07d0 (2000) */
+#define W5500_SIMR 0x0018 /* Socket Interrupt Mask Register */
+#define W5500_RTR 0x0019 /* Retry Time-value Register */
+
+#define W5100_S0_CR(priv) (S0_REGS(priv) + W5100_Sn_CR)
+#define S0_CR_OPEN 0x01 /* OPEN command */
+#define S0_CR_CLOSE 0x10 /* CLOSE command */
+#define S0_CR_SEND 0x20 /* SEND command */
+#define S0_CR_RECV 0x40 /* RECV command */
+#define W5100_S0_IR(priv) (S0_REGS(priv) + W5100_Sn_IR)
+#define S0_IR_SENDOK 0x10 /* complete sending */
+#define S0_IR_RECV 0x04 /* receiving data */
+#define W5100_S0_SR(priv) (S0_REGS(priv) + W5100_Sn_SR)
+#define S0_SR_MACRAW 0x42 /* mac raw mode */
+#define W5100_S0_TX_FSR(priv) (S0_REGS(priv) + W5100_Sn_TX_FSR)
+#define W5100_S0_TX_RD(priv) (S0_REGS(priv) + W5100_Sn_TX_RD)
+#define W5100_S0_TX_WR(priv) (S0_REGS(priv) + W5100_Sn_TX_WR)
+#define W5100_S0_RX_RSR(priv) (S0_REGS(priv) + W5100_Sn_RX_RSR)
+#define W5100_S0_RX_RD(priv) (S0_REGS(priv) + W5100_Sn_RX_RD)
+
+#define W5500_TX_MEM_START 0x20000
+#define W5500_TX_MEM_SIZE 0x04000
+#define W5500_RX_MEM_START 0x30000
+#define W5500_RX_MEM_SIZE 0x04000
+
+#define W5500_Sn_RXMEM_SIZE(n) \
+ (0x1001e + (n) * 0x40000) /* Sn RX Memory Size */
+#define W5500_Sn_TXMEM_SIZE(n) \
+ (0x1001f + (n) * 0x40000) /* Sn TX Memory Size */
+
+/**
+ * A packet handler
+ *
+ * dev - device pointer
+ * pkt - pointer to the "sent" packet
+ * len - packet length
+ */
+typedef int w5500_eth_tx_hand_f(struct udevice *dev, void *pkt,
+ unsigned int len);
+
+/**
+ * struct eth_w5500_priv - memory for w5500 driver
+ *
+ * host_hwaddr - MAC address of mocked machine
+ * disabled - Will not respond
+ * recv_packet_buffer - buffers of the packet returned as received
+ * recv_packet_length - lengths of the packet returned as received
+ * recv_packets - number of packets returned
+ * tx_handler - function to generate responses to sent packets
+ * priv - a pointer to some structure a test may want to keep track of
+ */
+struct eth_w5500_priv {
+ uchar host_hwaddr[ARP_HLEN];
+ bool disabled;
+ uchar *recv_packet_buffer[PKTBUFSRX];
+ int recv_packet_length[PKTBUFSRX];
+ int recv_packets;
+ w5500_eth_tx_hand_f *tx_handler;
+ const struct dm_spi_ops *spi_ops;
+ struct udevice **spi_dev;
+ /* Socket 0 register offset address */
+ u32 s0_regs;
+ /* Socket 0 TX buffer offset address and size */
+ u32 s0_tx_buf;
+ u16 s0_tx_buf_size;
+ /* Socket 0 RX buffer offset address and size */
+ u32 s0_rx_buf;
+ u16 s0_rx_buf_size;
+ bool promisc;
+ u32 msg_enable;
+ u16 offset;
+ void *priv;
+};
+
+static int w5500_spi_write(struct udevice *dev, u32 addr, u8 data);
+static int w5500_spi_read(struct udevice *dev, u32 addr);
+static void w5500_enable_intr(struct udevice *dev);
+static int w5500_spi_read16(struct udevice *dev, u32 addr);
+static int w5500_spi_write16(struct udevice *dev, u32 addr, u16 data);
+static int w5500_writebuf(struct udevice *dev, u16 offset, const u8 *buf,
+ int len);
+static int w5500_readbuf(struct udevice *dev, u16 offset, u8 *buf, int len);
+static int w5500_writebulk(struct udevice *dev, u32 addr, const u8 *buf,
+ int len);
+
+#endif /* __ETH_H */
--
2.43.0
More information about the U-Boot
mailing list