[PATCH v2] clk: fixed-rate: Use "clock-output-names" to name fixed clocks

[Adam Ford]

On Thu, Apr 24, 2025 at 9:37 PM Adam Ford <aford173 at gmail.com> wrote:
>
> On Thu, Apr 24, 2025 at 9:35 PM Fabio Estevam <festevam at gmail.com> wrote:
> >
> > On Thu, Apr 24, 2025 at 11:20 PM Marek Vasut <marex at denx.de> wrote:
> >
> > > Probably some timeout in the esdhc driver, maybe some clock are not
> > > enabled ? I don't see it on the MX8MP.
> >
> > Same here. I didn't see this error on an imx8mp-evk.
>
> If memory serves, I thought SPL used the Boot ROM on Plus and Nano to
> load U-Boot where the Mini has an older boot ROM and required more
> driver initialization.
>
> I could be wrong.  I'll try to test my Mini this weekend.

I pulled my mini out.  With Marek's clk.diff file applied on top of
U-Boot next, it boots quickly without delay, and I don't get a PMIC
error.  I don't have an EVK at my home lab to test.


U-Boot SPL 2025.04-rc5-00835-g61128a5b704d-dirty (Apr 24 2025 - 21:53:22 -0500)
WDT:   Not starting watchdog at 30280000
Trying to boot from MMC1
NOTICE:  Do not release JR0 to NS as it can be used by HAB
NOTICE:  BL31: v2.10.14(release):lts-v2.10.14-380-gd7da75fef
NOTICE:  BL31: Built : 20:12:47, Apr  3 2025


U-Boot 2025.04-rc5-00835-g61128a5b704d-dirty (Apr 24 2025 - 21:53:22 -0500)

CPU:   NXP i.MX8MMQ Rev1.0 A53 at 1200 MHz
CPU:   Industrial temperature grade (-40C to 105C) at 30C
Model: Beacon EmbeddedWorks i.MX8M Mini Development Kit
DRAM:  2 GiB
Core:  225 devices, 26 uclasses, devicetree: separate
WDT:   Not starting watchdog at 30280000
MMC:   FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... Reading from MMC(2)... OK
In:    serial at 30890000
Out:   serial at 30890000
Err:   serial at 30890000
SEC0:  RNG instantiated
Net:   eth0: ethernet at 30be0000
Hit any key to stop autoboot:  0
u-boot=>



>
> adam
> >
> > >
> > > Did you already apply
> > > Re: [PATCH] clk: imx: Finish converting clock-osc-24 back to osc_24
> >
> > Yes, I applied this one locally, but it didn't make a difference.
> >
> > I haven't had a chance to debug this issue yet.