[PATCH 12/13] board: dragonboard410c: Use button_cmd instead of custom code

[Neil Armstrong]

On 07/04/2025 18:59, Stephan Gerhold wrote:
> Simplify the board code by using the new BUTTON_CMD functionality, instead
> of implementing this separately using C code. This allows disabling or
> customizing this functionality if wanted.
> 
> Signed-off-by: Stephan Gerhold <stephan.gerhold at linaro.org>
> ---
>   board/qualcomm/dragonboard410c/dragonboard410c.c   | 22 ----------------------
>   board/qualcomm/dragonboard410c/dragonboard410c.env |  2 ++
>   configs/dragonboard410c_defconfig                  |  2 +-
>   3 files changed, 3 insertions(+), 23 deletions(-)
> 
> diff --git a/board/qualcomm/dragonboard410c/dragonboard410c.c b/board/qualcomm/dragonboard410c/dragonboard410c.c
> index 697e3c9b08b5c874912eb66ff4f0b3d32deaae01..4698b9d5e3e47a9b0389d9f6bafab9dd6db56a41 100644
> --- a/board/qualcomm/dragonboard410c/dragonboard410c.c
> +++ b/board/qualcomm/dragonboard410c/dragonboard410c.c
> @@ -51,28 +51,6 @@ static void msm_generate_mac_addr(u8 *mac)
>   	put_unaligned_be32(msm_board_serial(), &mac[2]);
>   }
>   
> -/* Check for vol- button - if pressed - stop autoboot */
> -int misc_init_r(void)
> -{
> -	struct udevice *btn;
> -	int ret;
> -	enum button_state_t state;
> -
> -	ret = button_get_by_label("vol_down", &btn);
> -	if (ret < 0) {
> -		printf("Couldn't find power button!\n");
> -		return ret;
> -	}
> -
> -	state = button_get_state(btn);
> -	if (state == BUTTON_ON) {
> -		env_set("preboot", "setenv preboot; run fastboot");
> -		printf("vol_down pressed - Starting fastboot.\n");
> -	}
> -
> -	return 0;
> -}
> -
>   int qcom_late_init(void)
>   {
>   	char serial[16];
> diff --git a/board/qualcomm/dragonboard410c/dragonboard410c.env b/board/qualcomm/dragonboard410c/dragonboard410c.env
> index 71f929b646cc305cf5223cd3462fe2350bc8093e..38399d65c640ee18261529ee3101b268700fa004 100644
> --- a/board/qualcomm/dragonboard410c/dragonboard410c.env
> +++ b/board/qualcomm/dragonboard410c/dragonboard410c.env
> @@ -2,3 +2,5 @@
>   initrd_high=0xffffffffffffffff
>   fastboot=fastboot -l $fastboot_addr_r usb 0
>   boot_targets=usb mmc1 mmc0 pxe
> +button_cmd_0_name=vol_down
> +button_cmd_0=run fastboot
> diff --git a/configs/dragonboard410c_defconfig b/configs/dragonboard410c_defconfig
> index 414dda6778c95eb3fdcd6ef522d8c7d0ef9219fa..449d48a3c004117b832ad620d49beb681a9bda68 100644
> --- a/configs/dragonboard410c_defconfig
> +++ b/configs/dragonboard410c_defconfig
> @@ -14,6 +14,7 @@ CONFIG_OF_LIBFDT_OVERLAY=y
>   CONFIG_SYS_LOAD_ADDR=0x80080000
>   CONFIG_IDENT_STRING="\nQualcomm-DragonBoard 410C"
>   CONFIG_REMAKE_ELF=y
> +CONFIG_BUTTON_CMD=y
>   CONFIG_FIT=y
>   CONFIG_BOOTSTD_FULL=y
>   CONFIG_OF_BOARD_SETUP=y
> @@ -22,7 +23,6 @@ CONFIG_SYS_CBSIZE=512
>   CONFIG_SYS_PBSIZE=548
>   # CONFIG_DISPLAY_CPUINFO is not set
>   # CONFIG_DISPLAY_BOARDINFO is not set
> -CONFIG_MISC_INIT_R=y
>   CONFIG_SYS_PROMPT="dragonboard410c => "
>   CONFIG_CMD_MD5SUM=y
>   CONFIG_CMD_MEMINFO=y
> 

Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>