[PATCH] net: usb: r8152: add device id of Linksys USB3GIGV1

[Marek Vasut]

On 3/31/25 5:06 PM, Gabor Juhos wrote:
> The Linksys USB3GIGV1 device is a USB 3.0 Wired Gigabit Adapter
> supporting 10/100/1000 Mbits/sec transfer rates. It is based on
> RTL8153 and it works correctly with the r8152 driver:
> 
>    uDPU>> usb start
>    starting USB...
>    Bus usb at 58000: Register 2000104 NbrPorts 2
>    Starting the controller
>    USB XHCI 1.00
>    scanning bus usb at 58000 for devices... 2 USB Device(s) found
>           scanning usb for storage devices... 0 Storage Device(s) found
>    uDPU>> usb info 1
>    config for device 1
>    2: Vendor specific,  USB Revision 2.10
>     - Linksys Linksys USB3GIGV1 000001000000
>     - Class: (from Interface) Vendor specific
>     - PacketSize: 64  Configurations: 2
>     - Vendor: 0x13b1  Product 0x0041 Version 48.0
>       Configuration: 1
>       - Interfaces: 1 Bus Powered Remote Wakeup 180mA
>         Interface: 0
>         - Alternate Setting 0, Endpoints: 3
>         - Class Vendor specific
>         - Endpoint 1 In Bulk MaxPacket 512
>         - Endpoint 2 Out Bulk MaxPacket 512
>         - Endpoint 3 In Interrupt MaxPacket 2 Interval 8ms
> 
>    uDPU>> dm tree usb at 58000
>     Class     Seq    Probed  Driver                Name
>    -----------------------------------------------------------
>     usb           0  [ + ]   xhci_mvebu            usb at 58000
>     usb_hub       0  [ + ]   usb_hub               `-- usb_hub
>     ethernet      2  [ + ]   r8152_eth                 `-- r8152_eth
>     bootdev       3  [   ]   eth_bootdev                   `-- r8152_eth.bootdev
>    uDPU>> setenv ethact r8152_eth
>    uDPU>> setenv serverip 192.168.1.253
>    uDPU>> setenv ipaddr 192.168.1.1
>    uDPU>> ping 192.168.1.253
>    Using r8152_eth device
>    host 192.168.1.253 is alive
>    uDPU>> tftpboot 0x10000000 random.bin
>    Using r8152_eth device
>    TFTP from server 192.168.1.253; our IP address is 192.168.1.1
>    Filename 'random.bin'.
>    Load address: 0x10000000
>    Loading: #################################################################
>    	 #################################################################
>    	 #################################################################
>    	 #################################################################
>    	 #################################################################
>    	 #################################################################
>    	 #################################################################
>    	 #################################################################
>    	 ####################################################
>    	 6.3 MiB/s
>    done
>    Bytes transferred = 8388608 (800000 hex)
>    uDPU>>
> 
> Add the USB id of the device to the driver to allow using it
> from U-Boot.
> 
> Signed-off-by: Gabor Juhos <j4g8y7 at gmail.com>
Reviewed-by: Marek Vasut <marex at denx.de>