[PATCH v2 1/6] arm64: dts: rockchip: Add rk3576 pcie nodes

[Kever Yang]

On 2025/7/12 06:44, Jonas Karlman wrote:
> From: Kever Yang <kever.yang at rock-chips.com>
>
> rk3576 has two pcie controllers, both are pcie2x1 work with
> naneng-combphy.
>
> Signed-off-by: Kever Yang <kever.yang at rock-chips.com>
> Tested-by: Shawn Lin <Shawn.lin at rock-chips.com>
> Reviewed-by: Nicolas Frattaroli <nicolas.frattaroli at collabora.com>
> Tested-by: Nicolas Frattaroli <nicolas.frattaroli at collabora.com>
> Link: https://lore.kernel.org/r/20250414145110.11275-3-kever.yang@rock-chips.com
> Signed-off-by: Heiko Stuebner <heiko at sntech.de>
>
> [ upstream commit: d4b9fc2af45d2b91b1654c4aaa1edcb4dd8f4918 ]
>
> (cherry picked from commit 44fcfeee7cf3a9da6cf2b909805da1cf33b228bc)
> Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>

Thanks,
- Kever
> ---
> v2: New patch
> ---
>   dts/upstream/src/arm64/rockchip/rk3576.dtsi | 108 ++++++++++++++++++++
>   1 file changed, 108 insertions(+)
>
> diff --git a/dts/upstream/src/arm64/rockchip/rk3576.dtsi b/dts/upstream/src/arm64/rockchip/rk3576.dtsi
> index 50332ec6e0de..ce8bcab215c0 100644
> --- a/dts/upstream/src/arm64/rockchip/rk3576.dtsi
> +++ b/dts/upstream/src/arm64/rockchip/rk3576.dtsi
> @@ -1240,6 +1240,114 @@
>   			reg = <0x0 0x27f22100 0x0 0x20>;
>   		};
>   
> +		pcie0: pcie at 2a200000 {
> +			compatible = "rockchip,rk3576-pcie", "rockchip,rk3568-pcie";
> +			reg = <0x0 0x22000000 0x0 0x00400000>,
> +			      <0x0 0x2a200000 0x0 0x00010000>,
> +			      <0x0 0x20000000 0x0 0x00100000>;
> +			reg-names = "dbi", "apb", "config";
> +			bus-range = <0x0 0xf>;
> +			clocks = <&cru ACLK_PCIE0_MST>, <&cru ACLK_PCIE0_SLV>,
> +				 <&cru ACLK_PCIE0_DBI>, <&cru PCLK_PCIE0>,
> +				 <&cru CLK_PCIE0_AUX>;
> +			clock-names = "aclk_mst", "aclk_slv",
> +				      "aclk_dbi", "pclk",
> +				      "aux";
> +			device_type = "pci";
> +			interrupts = <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "sys", "pmc", "msg", "legacy", "err", "msi";
> +			#interrupt-cells = <1>;
> +			interrupt-map-mask = <0 0 0 7>;
> +			interrupt-map = <0 0 0 1 &pcie0_intc 0>,
> +					<0 0 0 2 &pcie0_intc 1>,
> +					<0 0 0 3 &pcie0_intc 2>,
> +					<0 0 0 4 &pcie0_intc 3>;
> +			linux,pci-domain = <0>;
> +			max-link-speed = <2>;
> +			num-ib-windows = <8>;
> +			num-viewport = <8>;
> +			num-ob-windows = <2>;
> +			num-lanes = <1>;
> +			phys = <&combphy0_ps PHY_TYPE_PCIE>;
> +			phy-names = "pcie-phy";
> +			power-domains = <&power RK3576_PD_PHP>;
> +			ranges = <0x01000000 0x0 0x20100000 0x0 0x20100000 0x0 0x00100000
> +				  0x02000000 0x0 0x20200000 0x0 0x20200000 0x0 0x00e00000
> +				  0x03000000 0x9 0x00000000 0x9 0x00000000 0x0 0x80000000>;
> +			resets = <&cru SRST_PCIE0_POWER_UP>, <&cru SRST_P_PCIE0>;
> +			reset-names = "pwr", "pipe";
> +			#address-cells = <3>;
> +			#size-cells = <2>;
> +			status = "disabled";
> +
> +			pcie0_intc: legacy-interrupt-controller {
> +				interrupt-controller;
> +				#address-cells = <0>;
> +				#interrupt-cells = <1>;
> +				interrupt-parent = <&gic>;
> +				interrupts = <GIC_SPI 280 IRQ_TYPE_EDGE_RISING>;
> +			};
> +		};
> +
> +		pcie1: pcie at 2a210000 {
> +			compatible = "rockchip,rk3576-pcie", "rockchip,rk3568-pcie";
> +			reg = <0x0 0x22400000 0x0 0x00400000>,
> +			      <0x0 0x2a210000 0x0 0x00010000>,
> +			      <0x0 0x21000000 0x0 0x00100000>;
> +			reg-names = "dbi", "apb", "config";
> +			bus-range = <0x20 0x2f>;
> +			clocks = <&cru ACLK_PCIE1_MST>, <&cru ACLK_PCIE1_SLV>,
> +				 <&cru ACLK_PCIE1_DBI>, <&cru PCLK_PCIE1>,
> +				 <&cru CLK_PCIE1_AUX>;
> +			clock-names = "aclk_mst", "aclk_slv",
> +				      "aclk_dbi", "pclk",
> +				      "aux";
> +			device_type = "pci";
> +			interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "sys", "pmc", "msg", "legacy", "err", "msi";
> +			#interrupt-cells = <1>;
> +			interrupt-map-mask = <0 0 0 7>;
> +			interrupt-map = <0 0 0 1 &pcie1_intc 0>,
> +					<0 0 0 2 &pcie1_intc 1>,
> +					<0 0 0 3 &pcie1_intc 2>,
> +					<0 0 0 4 &pcie1_intc 3>;
> +			linux,pci-domain = <0>;
> +			max-link-speed = <2>;
> +			num-ib-windows = <8>;
> +			num-viewport = <8>;
> +			num-ob-windows = <2>;
> +			num-lanes = <1>;
> +			phys = <&combphy1_psu PHY_TYPE_PCIE>;
> +			phy-names = "pcie-phy";
> +			power-domains = <&power RK3576_PD_SUBPHP>;
> +			ranges = <0x01000000 0x0 0x21100000 0x0 0x21100000 0x0 0x00100000
> +				  0x02000000 0x0 0x21200000 0x0 0x21200000 0x0 0x00e00000
> +				  0x03000000 0x9 0x80000000 0x9 0x80000000 0x0 0x80000000>;
> +			resets = <&cru SRST_PCIE1_POWER_UP>, <&cru SRST_P_PCIE1>;
> +			reset-names = "pwr", "pipe";
> +			#address-cells = <3>;
> +			#size-cells = <2>;
> +			status = "disabled";
> +
> +			pcie1_intc: legacy-interrupt-controller {
> +				interrupt-controller;
> +				#address-cells = <0>;
> +				#interrupt-cells = <1>;
> +				interrupt-parent = <&gic>;
> +				interrupts = <GIC_SPI 266 IRQ_TYPE_EDGE_RISING>;
> +			};
> +		};
> +
>   		gmac0: ethernet at 2a220000 {
>   			compatible = "rockchip,rk3576-gmac", "snps,dwmac-4.20a";
>   			reg = <0x0 0x2a220000 0x0 0x10000>;