[PATCH v2 1/4] Gitlab: Add a "sage-lab" stage to access a board farm

[Tom Rini]

On Tue, 18 Nov 2025 15:00:12 -0600, Tom Rini wrote:

> This is the Gitlab side of adding support for the board lab connected to
> the "konsulko-sage" runner. On the software side, this lab uses only
> upstream labgrid. On the hardware side, each device under test is
> connected to its own exporter (typically a Raspberry Pi 4) that must be
> turned on (and cleanly turned off) as part of a given test cycle.
> 
> Add support for testing on a SolidRun Hummingboard 2 (imx6), Raspberry
> Pi 3 and Raspberry Pi 4. In all cases, we enable additional options to
> run more tests on the board. As we have some networking tests, we test
> both the legacy network stack and lwIP. In the case of Pi platforms, we
> test all of 32bit configuration, plain configuration and rpi_arm64, and
> again with and without lwIP.
> 
> [...]

Applied to u-boot/next, thanks!

[1/4] Gitlab: Add a "sage-lab" stage to access a board farm
      commit: 39c717dad8caa31567aae8473386f41097e725bc
[2/4] Docker: Add building TF-A for pine64_plus
      commit: 0c4990c5b84431db53f88292905b5aedd7d1ff28
[3/4] Gitlab: sage: Add Pine64+ platform
      commit: 04c913a3672848c95c15c0fb560e0f6de2fdd220
[4/4] Gitlab sage, Docker: Add snmp and rsync
      commit: f84a6d94c7bd28f5d450f997b395e94b1cff36ae
-- 
Tom