December 2025 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Mon Dec 1 01:01:25 CET 2025
Ending: Wed Dec 31 22:27:44 CET 2025
Messages: 1871

• [PATCH] armv8/fsl-layerscape: fdt: Remove offline cores from cooling device maps   Anthony Pighin (Nokia)
• 回复: [PATCH v1 4/4] imx8ulp: dst: Enable USB controller at 0x29920000 in host mode   Alice Guo (OSS)
• 回复: [PATCH v1 1/4] ehci-mx6: Add powerup_fixup implementation   Alice Guo (OSS)
• 回复: [PATCH v1 5/7] usb: Kconfig: imply DM_USB_GADGET   Alice Guo (OSS)
• 回复: [PATCH v1 2/7] usb: ehci-mx6: Fix usb_oc_config() for i.MX7/8M/9/7ULP/8 and 8ULP platforms   Alice Guo (OSS)
• 回复: [PATCH v1 3/7] usb: ehci-mx6: Extract PHY initialization into reusable function   Alice Guo (OSS)
• [EXT] Re: [PATCH v2 2/2] imx: Support i.MX91 11x11 FRDM board   Joseph Guo (OSS)
• [EXT] Re: [PATCH v2 2/2] imx: Support i.MX91 11x11 FRDM board   Joseph Guo (OSS)
• [PATCH v3 2/2] imx: Support i.MX91 11x11 FRDM board   Joseph Guo (OSS)
• [PATCH v3 2/2] imx: Support i.MX91 11x11 FRDM board   Joseph Guo (OSS)
• [PATCH] imx9: scmi: clock: Correct imx_clk_scmi_enable   Peng Fan (OSS)
• [PATCH] firmware: scmi: sandbox: Use scmi_clk_state_in_v2   Peng Fan (OSS)
• [PATCH 0/2] clk: scmi: Fix name defer   Peng Fan (OSS)
• [PATCH 1/2] clk: scmi: export scmi_clk_resolve_attr   Peng Fan (OSS)
• [PATCH 2/2] clk: imx95-blk-ctrl: Resolve scmi clk before using it   Peng Fan (OSS)
• [PATCH] power: regulator: Fix dependency of SPL_DM_REGULATOR_GPIO   Peng Fan (OSS)
• [PATCH v2] firmware: scmi: sandbox: Use scmi_clk_state_in_v2   Peng Fan (OSS)
• [PATCH V2] imx9: scmi: clock: Correct imx_clk_scmi_enable   Peng Fan (OSS)
• [PATCH v2 0/3] clk: scmi: various fixes   Peng Fan (OSS)
• [PATCH v4 0/5] android: add bootconfig support   Guillaume La Roque (TI.com)
• [PATCH v4 1/5] boot: android: import addBootConfigParameters() from AOSP   Guillaume La Roque (TI.com)
• [PATCH v4 2/5] boot: android: Add sandbox memory mapping support   Guillaume La Roque (TI.com)
• [PATCH v4 3/5] boot: android: Add bootconfig support   Guillaume La Roque (TI.com)
• [PATCH v4 4/5] cmd: abootimg: Add 'get ramdisk' command   Guillaume La Roque (TI.com)
• [PATCH v4 5/5] test: abootimg: Add test for bootconfig handling   Guillaume La Roque (TI.com)
• [PATCH v2 0/4] video: simple_panel support for am335x evm panel   Markus Schneider-Pargmann (TI.com)
• [PATCH v2 1/4] panel: Add missing comment for the timing argument   Markus Schneider-Pargmann (TI.com)
• [PATCH v2 2/4] panel: Lightweight support of get_modes()   Markus Schneider-Pargmann (TI.com)
• [PATCH v2 3/4] video: simple_panel: Add tfc_s9700rtwv43tr_01b   Markus Schneider-Pargmann (TI.com)
• [PATCH v2 4/4] video: ti: am335x: Support OF graph   Markus Schneider-Pargmann (TI.com)
• [PATCH v3 0/4] video: simple_panel support for am335x evm panel   Markus Schneider-Pargmann (TI.com)
• [PATCH v3 1/4] panel: Add missing comment for the timing argument   Markus Schneider-Pargmann (TI.com)
• [PATCH v3 2/4] panel: Lightweight support of get_modes()   Markus Schneider-Pargmann (TI.com)
• [PATCH v3 3/4] video: simple_panel: Add tfc_s9700rtwv43tr_01b   Markus Schneider-Pargmann (TI.com)
• [PATCH v3 4/4] video: ti: am335x: Support OF graph   Markus Schneider-Pargmann (TI.com)
• [PATCH v3 0/9] arm: am335x: Switch to upstream devicetree   Markus Schneider-Pargmann (TI.com)
• [PATCH v3 1/9] arm: dts: am335x-evm: Add backlight to the panel   Markus Schneider-Pargmann (TI.com)
• [PATCH v3 2/9] configs: am335x_evm_defconfig: Enable panel   Markus Schneider-Pargmann (TI.com)
• [PATCH v3 3/9] include: configs: am335x_evm: Enable vidconsole   Markus Schneider-Pargmann (TI.com)
• [PATCH v3 4/9] configs: am335x_evm: Unify evm board defconfigs   Markus Schneider-Pargmann (TI.com)
• [PATCH v3 5/9] am33xx: Avoid hard failure on USB probe issue   Markus Schneider-Pargmann (TI.com)
• [PATCH v3 6/9] arm: dts: am335x-*-u-boot: Add chosen tick-timer   Markus Schneider-Pargmann (TI.com)
• [PATCH v3 7/9] am33xx: Fix comment about config symbols   Markus Schneider-Pargmann (TI.com)
• [PATCH v3 8/9] am33xx: Support upstream devicetree USB device   Markus Schneider-Pargmann (TI.com)
• [PATCH v3 9/9] configs: am335x_evm_defconfig: Switch to upstream devicetree   Markus Schneider-Pargmann (TI.com)
• [PATCH v7 00/13] am62: IO+DDR resume support   Markus Schneider-Pargmann (TI.com)
• [PATCH v7 01/13] arm: mach-k3: Kconfig: Add symbol for IO+DDR Low Power Mode   Markus Schneider-Pargmann (TI.com)
• [PATCH v7 02/13] arm: mach-k3: common: Add CANUART wakeup check helpers   Markus Schneider-Pargmann (TI.com)
• [PATCH v7 03/13] arm: mach-k3: Remove CANUART IO isolation   Markus Schneider-Pargmann (TI.com)
• [PATCH v7 04/13] ram: k3-ddrss: Add support for DDR in self-refresh   Markus Schneider-Pargmann (TI.com)
• [PATCH v7 05/13] firmware: ti_sci: Add TI_SCI_MSG_MIN_CONTEXT_RESTORE   Markus Schneider-Pargmann (TI.com)
• [PATCH v7 06/13] arm: mach-k3: common: Add lpm_resume_from_ddr   Markus Schneider-Pargmann (TI.com)
• [PATCH v7 07/13] arm: mach-k3: common: Helper for LPM meta data address from DT   Markus Schneider-Pargmann (TI.com)
• [PATCH v7 08/13] arm: mach-k3: am62a7_init: Resume on LPM exit   Markus Schneider-Pargmann (TI.com)
• [PATCH v7 09/13] arm: mach-k3: am62p5_init: Resume on LPM exit   Markus Schneider-Pargmann (TI.com)
• [PATCH v7 10/13] arm: dts: k3-am62a: Add r5 device nodes   Markus Schneider-Pargmann (TI.com)
• [PATCH v7 11/13] arm: dts: k3-am62p: Add r5 device nodes   Markus Schneider-Pargmann (TI.com)
• [PATCH v7 12/13] configs: am62ax_evm_r5: Enable IODDR resume support   Markus Schneider-Pargmann (TI.com)
• [PATCH v7 13/13] configs: am62p_evm_r5_defconfig: Enable IODDR resume support   Markus Schneider-Pargmann (TI.com)
• [PATCH v8 00/13] am62: IO+DDR resume support   Markus Schneider-Pargmann (TI.com)
• [PATCH v8 01/13] arm: mach-k3: Kconfig: Add symbol for IO+DDR Low Power Mode   Markus Schneider-Pargmann (TI.com)
• [PATCH v8 02/13] arm: mach-k3: am62xx-lpm-common: Add CANUART wakeup check helpers   Markus Schneider-Pargmann (TI.com)
• [PATCH v8 03/13] arm: mach-k3: Remove CANUART IO isolation   Markus Schneider-Pargmann (TI.com)
• [PATCH v8 04/13] ram: k3-ddrss: Add support for DDR in self-refresh   Markus Schneider-Pargmann (TI.com)
• [PATCH v8 05/13] firmware: ti_sci: Add TI_SCI_MSG_MIN_CONTEXT_RESTORE   Markus Schneider-Pargmann (TI.com)
• [PATCH v8 06/13] arm: mach-k3: am62xx-lpm-common: Add lpm_resume_from_ddr   Markus Schneider-Pargmann (TI.com)
• [PATCH v8 07/13] arm: mach-k3: am62xx-lpm-common: Helper for LPM meta data address from DT   Markus Schneider-Pargmann (TI.com)
• [PATCH v8 08/13] arm: mach-k3: am62a7_init: Resume on LPM exit   Markus Schneider-Pargmann (TI.com)
• [PATCH v8 09/13] arm: mach-k3: am62p5_init: Resume on LPM exit   Markus Schneider-Pargmann (TI.com)
• [PATCH v8 10/13] arm: dts: k3-am62a: Add r5 device nodes   Markus Schneider-Pargmann (TI.com)
• [PATCH v8 11/13] arm: dts: k3-am62p: Add r5 device nodes   Markus Schneider-Pargmann (TI.com)
• [PATCH v8 12/13] configs: am62ax_evm_r5: Enable IODDR resume support   Markus Schneider-Pargmann (TI.com)
• [PATCH v8 13/13] configs: am62p_evm_r5_defconfig: Enable IODDR resume support   Markus Schneider-Pargmann (TI.com)
• [PATCH] arm: dts: mediatek: switch mt8365 to OF_UPSTREAM   Macpaul Lin (林智斌)
• [PATCH 1/2] arm: mediatek: add support for MediaTek MT8188 SoC   Macpaul Lin (林智斌)
• [PATCH 1/2] arm: mediatek: add support for MediaTek MT8188 SoC   Macpaul Lin (林智斌)
• [PATCH 2/2] clk: mediatek: add MT8188 clock driver   Macpaul Lin (林智斌)
• [PATCH] arm: dts: mediatek: switch mt8365 to OF_UPSTREAM   Macpaul Lin (林智斌)
• [PATCH] arm: dts: mediatek: switch mt8365 to OF_UPSTREAM   Macpaul Lin (林智斌)
• [PATCH 1/2] arm: mediatek: add support for MediaTek MT8188 SoC   Macpaul Lin (林智斌)
• [PATCH v2 1/2] arm: mediatek: add support for MediaTek MT8188 SoC   Macpaul Lin (林智斌)
• [PATCH v2 2/2] clk: mediatek: add MT8188 clock driver   Macpaul Lin (林智斌)
• [PATCH 1/9] mt8365_evk_defconfig: enable clk command   Macpaul Lin (林智斌)
• [QUESTION] SpacemiT K1: Incorrect RAM detection with unpopulated CS1   Alper Ak
• [PATCH] mtd: spi: Add missing free in sf_get_bootflow   Tudor Ambarus
• [PATCH v2] test: correct strlcat license information   Sean Anderson
• [PATCH] test: strlcat: Fix SPDX license   Sean Anderson
• [PATCH] clk: Remove myself as a maintainer   Sean Anderson
• [PATCH] spi: designware: Allow disabling designware driver in SPL   Sean Anderson
• [PATCH] spi: designware: Allow disabling designware driver in SPL   Sean Anderson
• [PATCH v2] spi: designware: Allow disabling designware driver in SPL   Sean Anderson
• [PATCH] clk: versaclock: Fix incorrect error check in versaclock_probe()   Sean Anderson
• mtd: nand: pxa3xx: Null de-references with dev_err()   Sean Anderson
• [PATCH 1/1] cmd: lwip/wget: avoid NULL dereference in _set_cacert()   Ilias Apalodimas
• [PATCH v1 2/8] arm: Fix "file truncated" linker errors from empty built-in.a in SPL/TPL/VPL builds   Ilias Apalodimas
• [PATCH] efi_loader: Trigger capsule updates with automatically generated boot options   Ilias Apalodimas
• [PATCH v1 2/8] arm: Fix "file truncated" linker errors from empty built-in.a in SPL/TPL/VPL builds   Ilias Apalodimas
• [PATCH 04/19] test: don't test for CONFIG_UNIT_TEST twice   Ilias Apalodimas
• [[RESEND][PATCH 02/19] test: cmd/bdinfo: consider ARM architecture specific info   Ilias Apalodimas
• [PATCH 6/7] efi_selftest: simplify efi_selftest_variables   Ilias Apalodimas
• [PATCH 7/7] efi_selftest: simplify efi_selftest_variables_runtime   Ilias Apalodimas
• [PATCH 5/7] efi_selftest: simplify efi_st_query_variable_common   Ilias Apalodimas
• [PATCH 0/6] Add support for fwumdata   Ilias Apalodimas
• [PATCH] efi_loader: Trigger capsule updates with automatically generated boot options   Ilias Apalodimas
• [PATCH 0/6] Add support for fwumdata   Ilias Apalodimas
• [PATCH 0/6] Add support for fwumdata   Ilias Apalodimas
• [PATCH v3 0/6] Add support for SM3 secure hash   Ilias Apalodimas
• [PATCH 1/1] lib: uuid: add EFI_PARTITION_INFO_PROTOCOL_GUID translation   Ilias Apalodimas
• [PATCH v3 0/6] Add support for SM3 secure hash   Ilias Apalodimas
• [PATCH v2] efi_loader: Trigger capsule updates with automatically generated boot options   Ilias Apalodimas
• [PATCH] efi_loader: Add tests for efi_dp_find_obj()   Ilias Apalodimas
• [PATCH 1/1] configs: qemu_arm64: disable SEMIHOSTING   Ilias Apalodimas
• [PATCH v2] efi_loader: Trigger capsule updates with automatically generated boot options   Ilias Apalodimas
• [PATCH v2] efi_loader: Trigger capsule updates with automatically generated boot options   Ilias Apalodimas
• [PATCH 1/1] efi_selftest: enhance LoadImage test   Ilias Apalodimas
• [PATCH v3] efi_loader: Trigger capsule updates with automatically generated boot options   Ilias Apalodimas
• [PATCH] kbuild: Bump the build system to 6.1   Ilias Apalodimas
• [PATCH v3] efi_loader: Trigger capsule updates with automatically generated boot options   Ilias Apalodimas
• [PATCH v4] efi_loader: Trigger capsule updates with automatically generated boot options   Ilias Apalodimas
• [PATCH 2/2] efi_loader: Fix kernel panic when FTRACE is enabled   Ilias Apalodimas
• [PATCH] cmd: nvedit: Validate argument count before use   Ilias Apalodimas
• [PATCH v2 0/6] Add support for fwumdata   Ilias Apalodimas
• [PATCH v2 0/6] Add support for fwumdata   Ilias Apalodimas
• [PATCH 1/1] cmd/bdinfo: LMB and device-tree are not related   Ilias Apalodimas
• [PATCH 1/1] test: The LMB test depends on CONFIG_LMB   Ilias Apalodimas
• [PATCH 1/1] test: The LMB test depends on CONFIG_LMB   Ilias Apalodimas
• [PATCH 1/1] efi_selftest: remove unnecessary __efi_runtime_data attribute   Ilias Apalodimas
• [GIT PULL] Please pull u-boot-ufs-20251202   Neil Armstrong
• [PATCH v2] MAINTAINERS: update my email address   Neil Armstrong
• [PATCH] ufs: Disable UTP command timeout in slow mode   Neil Armstrong
• [PATCH 2/4] spl: Make UFS available for SPL builds   Neil Armstrong
• [PATCH 3/4] ufs: rockchip: Add device reset support   Neil Armstrong
• [PATCH] ufs: Disable UTP command timeout in slow mode   Neil Armstrong
• [PATCH v5 00/10] initial U-Boot SPL support on Amlogic GX SoCs   Neil Armstrong
• [PATCH v2] arm: meson: add support for EFI capsule updates   Neil Armstrong
• [PATCH] mmc: meson_gx_mmc: reduce maximum frequency   Neil Armstrong
• [PATCH v4 1/2] arm: meson: add support for EFI capsule updates   Neil Armstrong
• [PATCH v4 0/2] Support EFI capsule updates across Amlogic boards   Neil Armstrong
• [PATCH] ufs: Disable UTP command timeout in slow mode   Neil Armstrong
• [GIT PULL] Please pull u-boot-amlogic-next-20251219   Neil Armstrong
• [PATCH tiU2025.01] PENDING: configs: am62lx_evm: add GPT GUID   PRC Automation
• [RFC PATCH] efi_loader: disk: Add print to show ESP device   Padmarao Begari
• [RFC PATCH] efi_loader: disk: Add print to show ESP device   Begari, Padmarao
• [PATCH 00/11] mtd: spi-nor: Isolate stacked/parallel support from core   Begari, Padmarao
• [PATCH 1/2] usb: ci_udc: Check ci_ep->desc before use   Petr Benes
• [PATCH v2 1/2] usb: ci_udc: Check ci_ep->desc before use   Petr Beneš
• [PATCH v2 2/2] usb: ci_udc: cosmetics: EP and requests debug info   Petr Beneš
• [PATCH] pinctrl: single: Add missing free in single_allocate_function   Francois Berder
• [PATCH] dm: crypto: Check malloc return value   Francois Berder
• [PATCH] fs: ext4fs: Free memory while handling errors   Francois Berder
• [PATCH] mtd: spi: Add missing free in sf_get_bootflow   Francois Berder
• [PATCH v2] fs: ext4fs: Free memory while handling errors   Francois Berder
• [PATCH] cmd: onenand: Fix handling error path in onenand_block_test   Francois Berder
• [PATCH] board: stm32mp2: read boot index from backup register   Dario Binacchi
• [PATCH 0/5] Add dumpfwumdata tool for FWU metadata image   Dario Binacchi
• [PATCH 1/5] tools: build mkfwumdata with tools-only_defconfig   Dario Binacchi
• [PATCH 2/5] fwu: centralize bank state macros in fwu_mdata.h   Dario Binacchi
• [PATCH 3/5] fwu: use FWU_MAX_STATE_BANKS for bank_state array   Dario Binacchi
• [PATCH 4/5] tools: Add dumpfwumdata tool for FWU metadata image   Dario Binacchi
• [PATCH 5/5] tools: build dumpfwumdata with tools-only_defconfig   Dario Binacchi
• [PATCH tiU2025.01] PENDING: configs: am62lx_evm: add GPT GUID partition types   Bryan Brattlof
• [PATCH] doc: board: ti: k3: Fix a couple small typos   Bryan Brattlof
• [PATCH 1/4] configs: Remove default malloc length for K3 R5 SPL   Bryan Brattlof
• [PATCH 2/4] spl: Kconfig: k3: Increase malloc size after relocation for R5   Bryan Brattlof
• [PATCH 3/4] spl: Kconfig: k3: Set common default for CUSTOM_SYS_MALLOC items   Bryan Brattlof
• [PATCH 4/4] spl: Kconfig: k3: Set common default for SPL_LOAD_FIT(_ADDRESS)   Bryan Brattlof
• [PATCH] configs: am62[ap]x_evm_r5: enable SUPPORT_EMMC_BOOT   Bryan Brattlof
• [PATCH v8] Add optimized Makefile support for SoCFPGA handoff   Sune Brian
• [PATCH v2] Fix socfpga GEN5 boot by spl+u-boot sfp on RAW   Sune Brian
• [PATCH v9] Add optimized Makefile support for SoCFPGA handoff   Sune Brian
• [PATCH v8] Add optimized Makefile support for SoCFPGA handoff   Sune Brian
• [PATCH v4] SDRAM Calibration Failed fix for GEN5 SoCFPGA   Sune Brian
• [PATCH v1 2/8] arm: Fix "file truncated" linker errors from empty built-in.a in SPL/TPL/VPL builds   Sune Brian
• [PATCH v2] Fix socfpga GEN5 boot by spl+u-boot sfp on RAW   Sune Brian
• [PATCH v1 2/8] arm: Fix "file truncated" linker errors from empty built-in.a in SPL/TPL/VPL builds   Sune Brian
• [PATCH v2] Fix socfpga GEN5 boot by spl+u-boot sfp on RAW   Sune Brian
• [PATCH v2] Fix socfpga GEN5 boot by spl+u-boot sfp on RAW   Sune Brian
• [PATCH v1 2/8] arm: Fix "file truncated" linker errors from empty built-in.a in SPL/TPL/VPL builds   Sune Brian
• [PATCH v1 2/8] arm: Fix "file truncated" linker errors from empty built-in.a in SPL/TPL/VPL builds   Sune Brian
• [PATCH v1 2/8] arm: Fix "file truncated" linker errors from empty built-in.a in SPL/TPL/VPL builds   Sune Brian
• [PATCH v1 2/8] arm: Fix "file truncated" linker errors from empty built-in.a in SPL/TPL/VPL builds   Sune Brian
• [PATCH v1 2/8] arm: Fix "file truncated" linker errors from empty built-in.a in SPL/TPL/VPL builds   Sune Brian
• [PATCH v1 2/8] arm: Fix "file truncated" linker errors from empty built-in.a in SPL/TPL/VPL builds   Sune Brian
• [PATCH v1 2/8] arm: Fix "file truncated" linker errors from empty built-in.a in SPL/TPL/VPL builds   Sune Brian
• [PATCH v4] SDRAM Calibration Failed fix for GEN5 SoCFPGA   Sune Brian
• [PATCH v4] SDRAM Calibration Failed fix for GEN5 SoCFPGA   Sune Brian
• [PATCH v4] SDRAM Calibration Failed fix for GEN5 SoCFPGA   Sune Brian
• [PATCH v4] SDRAM Calibration Failed fix for GEN5 SoCFPGA   Sune Brian
• [PATCH v4] SDRAM Calibration Failed fix for GEN5 SoCFPGA   Sune Brian
• [PATCH v4] SDRAM Calibration Failed fix for GEN5 SoCFPGA   Sune Brian
• [PATCH v4] SDRAM Calibration Failed fix for GEN5 SoCFPGA   Sune Brian
• [PATCH v1 2/5] ddr: socfpga: Add ECC DRAM scrubbing support for Gen5/Arria10   Sune Brian
• [PATCH v4] SDRAM Calibration Failed fix for GEN5 SoCFPGA   Sune Brian
• [PATCH v4] SDRAM Calibration Failed fix for GEN5 SoCFPGA   Sune Brian
• [PATCH v1 2/5] ddr: socfpga: Add ECC DRAM scrubbing support for Gen5/Arria10   Sune Brian
• [PATCH v1 2/5] ddr: socfpga: Add ECC DRAM scrubbing support for Gen5/Arria10   Sune Brian
• [PATCH v1] fix PL330 CMD supported target   Sune Brian
• [PATCH v1] fix PL330 CMD supported target   Sune Brian
• [PATCH v1] Replace TARGET namespace and cleanup properly   Sune Brian
• [PATCH v1] Add CoreCourse socfpga Board - AC501   Sune Brian
• [PATCH v1] Add CoreCourse socfpga Board - AC550   Sune Brian
• [PATCH] omap_hsmmc: Support CONFIG_MMC_BROKEN_CD   Maarten Brock
• [PATCH 2/6] clk: scmi: Force call of scmi_clk_get_attribute() during probe   Patrice CHOTARD
• [PATCH] ARM: dts: stm32: Add 1 GiB DRAM settings for DH STM32MP13xx DHCOR SoM   Patrice CHOTARD
• [PATCH] ARM: dts: stm32: Fix 512 MiB DRAM settings for DH STM32MP13xx DHCOR SoM   Patrice CHOTARD
• [PATCH] ARM: stm32: Add missing build of debug UART init code on DH STM32MP1 DHSOM   Patrice CHOTARD
• [PATCH] stm32mp: Fix handling of OPTEE in the middle of DRAM   Patrice CHOTARD
• [PATCH 02/23] board: st: Update LED management for stm32mp1   Patrice CHOTARD
• [PATCH 17/23] ARM: dts: stm32: Drop "u-boot-led" and "error-led" from stm32mp135f-dk-u-boot   Patrice CHOTARD
• [PATCH 02/23] board: st: Update LED management for stm32mp1   Patrice CHOTARD
• [PATCH 00/23] stm32: Update led management for STMicroelectronics boards   Patrice CHOTARD
• [PATCH] ARM: dts: stm32: Fix 512 MiB DRAM settings for DH STM32MP13xx DHCOR SoM   Patrice CHOTARD
• [PATCH] ARM: stm32: Add missing build of debug UART init code on DH STM32MP1 DHSOM   Patrice CHOTARD
• [PATCH] stm32mp: Fix handling of OPTEE in the middle of DRAM   Patrice CHOTARD
• [PATCH] ARM: dts: stm32: Add 1 GiB DRAM settings for DH STM32MP13xx DHCOR SoM   Patrice CHOTARD
• [PULL] Pull request for u-boot next / v2026.04 = u-boot-stm32-20251205   Patrice CHOTARD
• [PATCH] i2c: stm32f7_i2c: save some ms in stm32_i2c_choose_solution   Patrice CHOTARD
• [PULL] Pull request for u-boot next / v2026.04 = u-boot-stm32-20251205   Patrice CHOTARD
• [PULL] Pull request for u-boot master / v2026.01 = u-boot-stm32-20251209   Patrice CHOTARD
• [PATCH 1/2] clk: scmi: export scmi_clk_resolve_attr   Patrice CHOTARD
• [PATCH v2 2/3] clk: stm322mp13: Resolve scmi clk before using it   Patrice CHOTARD
• [PATCH v3 3/3] clk: stm32: Update clock management for STM32MP13/25   Patrice CHOTARD
• [PATCH] video: stm32: ltdc: add .of_to_plat callback   Patrice CHOTARD
• [PATCH v2 2/3] clk: scmi: Fix priv initialization in scmi_clk_gate()   Patrice CHOTARD
• [GIT PULL] please pull scmi-master-2025-12-17   Patrice CHOTARD
• [PATCH v4 2/3] clk: scmi: Fix priv initialization in scmi_clk_gate()   Patrice CHOTARD
• [PATCH v3 0/3] Restore boot for STM32MP13/STM32MP2 board family   Patrice CHOTARD
• [PATCH v3 0/3] Restore boot for STM32MP13/STM32MP2 board family   Patrice CHOTARD
• [PATCH v2] test: correct strlcat license information   Denis 'GNUtoo' Carikli
• [PATCHv2 0/1] corstone1000: Add Cortex-A320 support on FVP   Frazer Carsley
• [PATCHv2 1/1] corstone1000: Add Cortex-A320 support on FVP   Frazer Carsley
• [PATCH v2] i2c: samsung: add support for Exynos7 HS-I2C   Kaustabh Chakraborty
• [PATCH 0/2] Support for Samsung Exynos 7870 DW-USB device in controller   Kaustabh Chakraborty
• [PATCH 0/2] Support for Samsung Exynos 7870 USB PHY device in driver   Kaustabh Chakraborty
• [PATCH 2/2] usb: dwc3-generic: add support for exynos7870   Kaustabh Chakraborty
• [PATCH 1/2] usb: dwc3-generic: allow fallback of dr_mode property to "otg"   Kaustabh Chakraborty
• [PATCH 0/1] Add initial support for Metanoia MT5824 EVB   Jun Chang
• [PATCH 1/1] board: mt5824: Add initial support for Metanoia MT5824 EVB   Jun Chang
• [PATCH 1/1] board: mt5824: Add initial support for Metanoia MT5824 EVB   Jun Chang
• [PATCH 0/4] Enable full UFS boot on Rockchip RK3576   Alexey Charkov
• [PATCH 1/4] common/spl: fit: Avoid directly loading images to load_addr   Alexey Charkov
• [PATCH 2/4] spl: Make UFS available for SPL builds   Alexey Charkov
• [PATCH 3/4] ufs: rockchip: Add device reset support   Alexey Charkov
• [PATCH 4/4] rockchip: spl: Add support for booting from UFS   Alexey Charkov
• [PATCH 1/4] common/spl: fit: Avoid directly loading images to load_addr   Alexey Charkov
• [PATCH 2/4] spl: Make UFS available for SPL builds   Alexey Charkov
• [PATCH] arm: dts: k3-j7200: Extend firewall for ATF region to TIFS   Chawdhry, Manorit
• [PATCH v1 1/8] configs: cyclone5: Disable mkeficapsule tool build   Chee, Tien Fong
• [PATCH v1 4/8] mmc: socfpga_dw_mmc: Restore legacy clkmgr address retrieval   Chee, Tien Fong
• [PATCH v1 5/8] spl: Remove ARCH_SOCFPGA from MMC raw mode enablement   Chee, Tien Fong
• [PATCH v1 6/8] configs: cyclone5: Enable SPL FAT support   Chee, Tien Fong
• [PATCH v1 7/8] configs: cyclone5: Update boot command for CycloneV   Chee, Tien Fong
• [PATCH v1 8/8] configs: cyclone5: Disable SPI in SPL   Chee, Tien Fong
• [PATCH] board: softing: vining: migrate to modern LED framework   Chee, Tien Fong
• [PATCH v8] Add optimized Makefile support for SoCFPGA handoff   Chee, Tien Fong
• [PATCH] arch: arm: mach-socfpga: Fix non-Agilex targets   Chee, Tien Fong
• Pull request: SoCFPGA changes for u-boot-socfpga-next-20251201   Chee, Tien Fong
• [PATCH] configs: socfpga: Permit EFI booting   Chee, Tien Fong
• [resend v2 1/1] configs: cyclone5: Enable random MAC address   Chee, Tien Fong
• [PATCH v1] configs: arria10: Disable mkeficapsule tool build   Chee, Tien Fong
• [PATCH v3 1/5] spl: Kconfig: Add missing SPL_LOAD_BLOCK for SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE   Chee, Tien Fong
• [PATCH v3 2/5] spl: mmc: Account for SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE being a choice   Chee, Tien Fong
• [PATCH v3 3/5] spl: mmc: Respect sector value passed to mmc_load_image_raw_partition   Chee, Tien Fong
• [PATCH v3 4/5] arch: arm: mach-socfpga: Adjust a raw sectors for MMC loading of U-Boot from SPL   Chee, Tien Fong
• [PATCH v3 5/5] configs: socfpga: Fix de0_nano_soc boot   Chee, Tien Fong
• [PATCH v2] configs: socfpga: Permit EFI booting   Chee, Tien Fong
• [PATCH v1 1/4] Revert "arch: arm: dts: agilex5: Set SDIO_SEL GPIO pin as output"   Chee, Tien Fong
• [PATCH v1 2/4] arm: dts: socfpga: agilex5: Upgrade SDHCI controller from SD4HC to SD6HC   Chee, Tien Fong
• [PATCH v1 3/4] configs: socfpga_agilex5: Enable MMC and Cadence SDHCI support   Chee, Tien Fong
• [PATCH v1 4/4] arm: dts: socfpga: agilex5: Add dedicated eMMC device tree support   Chee, Tien Fong
• [PATCH v1] ddr: altera: arria10: Fix incorrect address for mpu1   Chee, Tien Fong
• Pull request: SoCFPGA changes for u-boot-socfpga-next-20251217   Chee, Tien Fong
• [PATCH v6 06/12] video: rockchip: Add VOP2 support   Chaoyi Chen
• [PATCH v6 06/12] video: rockchip: Add VOP2 support   Chaoyi Chen
• [PATCH] lib/bcd: optimize _bin2bcd() for improved performance   Kuan-Wei Chiu
• [PATCH] clk: versaclock: Fix incorrect error check in versaclock_probe()   Kuan-Wei Chiu
• [PATCH 0/3] m68k: Add support for QEMU virt machine   Kuan-Wei Chiu
• [PATCH 1/3] serial: Add Goldfish TTY driver   Kuan-Wei Chiu
• [PATCH 2/3] m68k: Add support for M68040 CPU   Kuan-Wei Chiu
• [PATCH 3/3] board: Add QEMU m68k virt board support   Kuan-Wei Chiu
• [PATCH 1/3] serial: Add Goldfish TTY driver   Kuan-Wei Chiu
• [PATCH 0/3] m68k: Add support for QEMU virt machine   Kuan-Wei Chiu
• [PATCH 2/3] m68k: Add support for M68040 CPU   Kuan-Wei Chiu
• [PATCH 3/3] board: Add QEMU m68k virt board support   Kuan-Wei Chiu
• [PATCH 0/3] m68k: Add support for QEMU virt machine   Kuan-Wei Chiu
• [PATCH 3/3] board: Add QEMU m68k virt board support   Kuan-Wei Chiu
• [PATCH 2/3] m68k: Add support for M68040 CPU   Kuan-Wei Chiu
• [PATCH] checkpatch: Add check for space indentation in Kconfig   Kuan-Wei Chiu
• [PATCH v2 0/4] m68k: Add support for QEMU virt machine   Kuan-Wei Chiu
• [PATCH v2 1/4] serial: Add Goldfish TTY driver   Kuan-Wei Chiu
• [PATCH v2 2/4] m68k: Add support for M68040 CPU   Kuan-Wei Chiu
• [PATCH v2 3/4] board: Add QEMU m68k virt board support   Kuan-Wei Chiu
• [PATCH v2 4/4] CI: Add test jobs for QEMU m68k virt machine   Kuan-Wei Chiu
• [u-boot-test-hooks][PATCH] travis-ci: Add config for QEMU m68k virt machine   Kuan-Wei Chiu
• [PATCH v2 4/4] CI: Add test jobs for QEMU m68k virt machine   Kuan-Wei Chiu
• [PATCH v2 1/4] serial: Add Goldfish TTY driver   Kuan-Wei Chiu
• [PATCH v2 3/4] board: Add QEMU m68k virt board support   Kuan-Wei Chiu
• [PATCH v2 2/4] m68k: Add support for M68040 CPU   Kuan-Wei Chiu
• [PATCH v2 2/4] m68k: Add support for M68040 CPU   Kuan-Wei Chiu
• [PATCH v2 3/4] board: Add QEMU m68k virt board support   Kuan-Wei Chiu
• [PATCH v3 0/6] m68k: Add support for QEMU virt machine   Kuan-Wei Chiu
• [PATCH v3 1/6] serial: Add Goldfish TTY driver   Kuan-Wei Chiu
• [PATCH v3 2/6] timer: Add Goldfish timer driver   Kuan-Wei Chiu
• [PATCH v3 3/6] rtc: goldfish: Support platform data for non-DT probing   Kuan-Wei Chiu
• [PATCH v3 4/6] m68k: Add support for M68040 CPU   Kuan-Wei Chiu
• [PATCH v3 5/6] board: Add QEMU m68k virt board support   Kuan-Wei Chiu
• [PATCH v3 6/6] CI: Add test jobs for QEMU m68k virt machine   Kuan-Wei Chiu
• [u-boot-test-hooks][PATCH v2] travis-ci: Add config for QEMU m68k virt machine   Kuan-Wei Chiu
• [PATCH v3 2/6] timer: Add Goldfish timer driver   Kuan-Wei Chiu
• [PATCH v3 1/6] serial: Add Goldfish TTY driver   Kuan-Wei Chiu
• [PATCH v3 3/6] rtc: goldfish: Support platform data for non-DT probing   Kuan-Wei Chiu
• [u-boot-test-hooks][PATCH v2] travis-ci: Add config for QEMU m68k virt machine   Kuan-Wei Chiu
• [PATCH] Fix typo "addtional" -> "additional" in pflash section.   Manjae Cho
• [PATCH] doc: qemu-riscv: Fix typo and add network testing section   Manjae Cho
• [PATCH v2 0/2] Improve QEMU emulation documentation   Manjae Cho
• [PATCH v2 1/2] doc: qemu-riscv: Fix typo in pflash section   Manjae Cho
• [PATCH v2 2/2] doc: emulation: Add network testing documentation   Manjae Cho
• [PATCH 0/3] clk: scmi: various fixes   Patrice Chotard
• [PATCH 1/3] clk: scmi: Fix typo scmi_clk_get_attibute   Patrice Chotard
• [PATCH 2/3] clk: scmi: Fix priv initialization in scmi_clk_gate()   Patrice Chotard
• [PATCH 3/3] clk: scmi: Remove duplicated scmi_generic_protocol_version() request   Patrice Chotard
• [PATCH v2 0/3] Restore boot for STM32MP13/STM32MP2 board family   Patrice Chotard
• [PATCH v2 1/3] clk: stm32mp13: Reorder include files   Patrice Chotard
• [PATCH v2 2/3] clk: stm322mp13: Resolve scmi clk before using it   Patrice Chotard
• [PATCH v2 3/3] clk: stm322mp25: Resolve scmi clk before using it   Patrice Chotard
• [PATCH v2 0/3] clk: scmi: various fixes   Patrice Chotard
• [PATCH v2 1/3] clk: scmi: Fix typo scmi_clk_get_attibute   Patrice Chotard
• [PATCH v2 2/3] clk: scmi: Fix priv initialization in scmi_clk_gate()   Patrice Chotard
• [PATCH v2 3/3] clk: scmi: Remove duplicated scmi_generic_protocol_version() request   Patrice Chotard
• [PATCH v3 0/3] Restore boot for STM32MP13/STM32MP2 board family   Patrice Chotard
• [PATCH v3 1/3] clk: stm32mp13: Reorder include files   Patrice Chotard
• [PATCH v3 2/3] ARM: dts: stm32: Add SCMI clocks in rcc node for stm32mp131.dtsi   Patrice Chotard
• [PATCH v3 3/3] clk: stm32: Update clock management for STM32MP13/25   Patrice Chotard
• [PATCH 0/3] spi: stm32: OSPI and QSPI throughput optimization   Patrice Chotard
• [PATCH 1/3] spi: stm32-ospi: Increase read throughput in indirect mode   Patrice Chotard
• [PATCH 2/3] spi: stm32-qspi: Increase read throughput in indirect mode   Patrice Chotard
• [PATCH 3/3] spi: stm32-qspi: Optimize FIFO accesses using u16 or u32   Patrice Chotard
• [PATCH v3 0/3] clk: scmi: various fixes   Patrice Chotard
• [PATCH v3 1/3] clk: scmi: Fix typo scmi_clk_get_attibute   Patrice Chotard
• [PATCH v3 2/3] clk: scmi: Fix priv initialization in scmi_clk_gate()   Patrice Chotard
• [PATCH v3 3/3] clk: scmi: Remove duplicated scmi_generic_protocol_version() request   Patrice Chotard
• [PATCH v4 0/3] clk: scmi: various fixes   Patrice Chotard
• [PATCH v4 1/3] clk: scmi: Fix typo scmi_clk_get_attibute   Patrice Chotard
• [PATCH v4 2/3] clk: scmi: Fix priv initialization in scmi_clk_gate()   Patrice Chotard
• [PATCH v4 3/3] clk: scmi: Remove duplicated scmi_generic_protocol_version() request   Patrice Chotard
• [PATCH v5 0/3] clk: scmi: various fixes   Patrice Chotard
• [PATCH v5 1/3] clk: scmi: Fix typo scmi_clk_get_attibute   Patrice Chotard
• [PATCH v5 2/3] clk: scmi: Fix priv initialization in scmi_clk_gate()   Patrice Chotard
• [PATCH v5 3/3] clk: scmi: Remove duplicated scmi_generic_protocol_version() request   Patrice Chotard
• [PATCH v1] configs: qcom_qcs615: Correct debug UART clock frequency   Casey Connolly
• [PATCH] phy: Add MSM8996 support to Qualcomm QUSB2 phy   Casey Connolly
• Standard Boot integration - script validation before execution   Alexander Dahl
• [PATCH] arm: dts: k3-am62d-evm-binman: Update DM   Anshul Dalal
• [PATCH v2] configs: am65x_usbdfu: add SPL_USE_TINY_PRINTF_POINTER_SUPPORT   Anshul Dalal
• [PATCH next v2] ti: k3: abstract common fdt api for reserved mem fixups   Anshul Dalal
• [PATCH next v3] Kconfig: select SPL_USE_TINY_PRINTF_POINTER_SUPPORT for K3   Anshul Dalal
• [PATCH 0/8] various Kconfig option changes   Anshul Dalal
• [PATCH next v3] Kconfig: select SPL_USE_TINY_PRINTF_POINTER_SUPPORT for K3   Anshul Dalal
• [PATCH next v3] Kconfig: select SPL_USE_TINY_PRINTF_POINTER_SUPPORT for K3   Anshul Dalal
• [PATCH master] doc: board: ti: fix alt name for tispl.bin in DFU mode   Anshul Dalal
• [PATCH] arm: dts: k3-am62d-evm-binman: Update DM   Andrew Davis
• [PATCH] configs: am335x_hs_evm_spi_defconfig: Remove duplicate symbols   Andrew Davis
• [PATCH v2] configs: am571x_hs_evm_defconfig: Reserve EMIF memory used by PPA   Andrew Davis
• [PATCH v2] configs: am571x_hs_evm_defconfig: Reserve EMIF memory used by PPA   Andrew Davis
• [PATCH] arm: dts: k3-am62d-evm-binman: Update DM   Andrew Davis
• [PATCH v3 4/9] configs: am335x_evm: Unify evm board defconfigs   Andrew Davis
• [PATCH v2] configs: am571x_hs_evm_defconfig: Reserve EMIF memory used by PPA   Andrew Davis
• [PATCH v2] configs: am571x_hs_evm_defconfig: Reserve EMIF memory used by PPA   Andrew Davis
• [PATCH 1/4] configs: Remove default malloc length for K3 R5 SPL   Andrew Davis
• [PATCH 2/4] spl: Kconfig: k3: Increase malloc size after relocation for R5   Andrew Davis
• [PATCH 3/4] spl: Kconfig: k3: Set common default for CUSTOM_SYS_MALLOC items   Andrew Davis
• [PATCH 4/4] spl: Kconfig: k3: Set common default for SPL_LOAD_FIT(_ADDRESS)   Andrew Davis
• [PATCH] doc: board: ti: k3: Fix a couple small typos   Andrew Davis
• [PATCH next v3] Kconfig: select SPL_USE_TINY_PRINTF_POINTER_SUPPORT for K3   Andrew Davis
• [PATCH next v3] Kconfig: select SPL_USE_TINY_PRINTF_POINTER_SUPPORT for K3   Andrew Davis
• [PATCH] Revert "drivers: scsi: fix inaccurate block count reporting in scsi operations"   Tony Dinh
• [PATCH] arm: kirkwood: Remove unnecessary watchdog GPIO for ZyXEL NSA325 board   Tony Dinh
• [PATCH] Revert "drivers: scsi: fix inaccurate block count reporting in scsi operations"   Tony Dinh
• [PATCH] Revert "drivers: scsi: fix inaccurate block count reporting in scsi operations"   Tony Dinh
• [PATCH] Revert "drivers: scsi: fix inaccurate block count reporting in scsi operations"   Tony Dinh
• [PATCH v2] drivers: scsi: fix double decrement of block count in 64-bit LBA path   Tony Dinh
• [PATCH v1] board: toradex: add aquila am69 support   Francesco Dolcini
• [PATCH v2] board: toradex: add aquila am69 support   Francesco Dolcini
• [PATCH v1] doc: board: verdin-am62p: Fix boot log output   Francesco Dolcini
• [PATCH 0/2] configs: apalis-imx8/colibri-imx8x: use default for SYS_MALLOC_F_LEN   Francesco Dolcini
• [PATCH v1] toradex: tdx-cfg-block: add pid4 support for new modules   Francesco Dolcini
• [PATCH v1 2/9] riscv: dts: starfive: Add VisionFive 2 Lite board device tree   Conor Dooley
• [PATCH 0/2] UEFI Capsule - PKCS11 Support   Wojciech Dubowik
• [PATCH 1/2] tools: mkeficapsule: Add support for pkcs11   Wojciech Dubowik
• [PATCH 2/2] binman: Accept pkcs11 URI tokens for capsule updates   Wojciech Dubowik
• [PATCH 2/3] m68k: Add support for M68040 CPU   Angelo Dureghello
• [PATCH v2 16/25] m68k: Drop unused status_led.h header file   Angelo Dureghello
• [PATCH 1/6] doc/arch/m68k.rst: Update toolchain comment   Angelo Dureghello
• [Upstream] [PATCH v2 1/3] board: phytec: phycore-imx93: Switch to standard boot   Wadim Egorov
• [Upstream] [PATCH v2 2/3] board: phytec: phycore-imx93: Set boot_targets dynamically   Wadim Egorov
• [Upstream] [PATCH v2 2/3] board: phytec: phycore-imx93: Set boot_targets dynamically   Wadim Egorov
• [PATCH 2/2] imx: Support i.MX91 11x11 FRDM board   Fabio Estevam
• [PATCH v1 2/2] imx8ulp_evk: Switch to use devicetree imported from Linux kernel release   Fabio Estevam
• [PATCH 5/5] board: toradex: add splash screen to Toradex i.MX7D Colibri board   Fabio Estevam
• [PATCH 2/2] imx: Support i.MX91 11x11 FRDM board   Fabio Estevam
• [PATCH 2/2] imx: Support i.MX91 11x11 FRDM board   Fabio Estevam
• [PATCH 2/2] imx: Support i.MX91 11x11 FRDM board   Fabio Estevam
• [PATCH v2 1/4] panel: Add missing comment for the timing argument   Fabio Estevam
• [PATCH v2 3/4] video: simple_panel: Add tfc_s9700rtwv43tr_01b   Fabio Estevam
• [PATCH v2 2/4] panel: Lightweight support of get_modes()   Fabio Estevam
• [PATCH v2 2/2] imx: Support i.MX91 11x11 FRDM board   Fabio Estevam
• [EXT] Re: [PATCH v2 2/2] imx: Support i.MX91 11x11 FRDM board   Fabio Estevam
• [EXT] Re: [PATCH v2 2/2] imx: Support i.MX91 11x11 FRDM board   Fabio Estevam
• [PATCH v2] arm: imx: imx8m: soc: Add support for 'boot_device' and 'boot_instance' environment variablesAdd setup_boot_mode for imx8m   Fabio Estevam
• [PATCH v2 1/2] imx8ulp_evk: Move environment variables to .env file   Fabio Estevam
• [GIT PULL] Please pull u-boot-imx-next-20251206   Fabio Estevam
• [PATCH v2] imx9: scmi: soc: USB instance number change for silicon revision B0   Fabio Estevam
• [PATCH 0/2] nxp-imx93image etype for the imx93   Fabio Estevam
• [PATCH 0/2] configs: apalis-imx8/colibri-imx8x: use default for SYS_MALLOC_F_LEN   Fabio Estevam
• [PATCH v2 3/3] board: phytec: phycore-imx93: env: Add required uuu variables   Fabio Estevam
• [PATCH v2] nitrogen6x: change maintainer   Fabio Estevam
• RV1103B: Attempt to upstream   Fabio Estevam
• RV1103B: Attempt to upstream   Fabio Estevam
• [PATCH v1 7/7] video: imx: ipuv3: refactor to use dm-managed state   Fabio Estevam
• [GIT PULL] Please pull u-boot-imx-next-20251229   Fabio Estevam
• [PATCH] video: mxsfb: fix pixel clock polarity   Fabio Estevam
• [PATCH v4 0/2] Add FRDM-IMX91 initial support   Fabio Estevam
• [PATCH v2 0/7] Refactor i.MX IPU driver   Fabio Estevam
• [PATCH v3 0/3] Updates the i.MX8ULP EVK board support   Fabio Estevam
• [PATCH] Makefile: Make flash.bin target available on i.MX9   Fabio Estevam
• [PATCH v3 2/3] ARM: dts: stm32: Add SCMI clocks in rcc node for stm32mp131.dtsi   Gabriel FERNANDEZ
• [PATCH v3 3/3] clk: stm32: Update clock management for STM32MP13/25   Gabriel FERNANDEZ
• [PATCH v3 1/3] clk: stm32mp13: Reorder include files   Gabriel FERNANDEZ
• [PATCH v1 1/2] imx8ulp_evk: Move environment variables to .env file   Peng Fan
• [PATCH 2/2] imx: Support i.MX91 11x11 FRDM board   Peng Fan
• [PATCH 2/2] imx: Support i.MX91 11x11 FRDM board   Peng Fan
• [PATCH 1/3] clk: scmi: Fix typo scmi_clk_get_attibute   Peng Fan
• [PATCH 2/3] clk: scmi: Fix priv initialization in scmi_clk_gate()   Peng Fan
• [PATCH 3/3] clk: scmi: Remove duplicated scmi_generic_protocol_version() request   Peng Fan
• [PATCH 1/3] power: regulator: common: remove unnecessary debug trace   Peng Fan
• [PATCH 2/3] power: regulator: common: use dm_gpio_is_valid helper   Peng Fan
• [PATCH 3/3] power: regulator: common: fix compilation issue   Peng Fan
• [PATCH 0/3] Fix compilation issue on regulator_common file   Peng Fan
• [PATCH v2 1/9] mmc: sdhci-cadence: Add reset control support   Peng Fan
• [PATCH v2 2/9] mmc: mmc-uclass: Use max-frequency from device tree with default handling   Peng Fan
• [PATCH v2 3/9] mmc: sdhci-cadence: Use max-frequency property from device tree   Peng Fan
• [PATCH v2 4/9] mmc: sdhci-cadence: Set controller and PHY speed modes for SD and eMMC cards   Peng Fan
• [PATCH v2 5/9] mmc: sdhci: Add SDHCI_SPEC_400, _410, and _420 version defines   Peng Fan
• [PATCH v2 6/9] mmc: sdhci-cadence: Use hardware version field for Cadence SDHCI controller   Peng Fan
• [PATCH v2 7/9] mmc: sdhci-cadence: Enable software tuning for both SD and eMMC interfaces   Peng Fan
• [PATCH v2 8/9] mmc: sdhci-cadence6: socfpga: Fix DT property naming convention   Peng Fan
• [PATCH v2 9/9] mmc: sdhci-cadence6: Add DLL master control and improve tuning reliability   Peng Fan
• [PATCH 2/3] clk: scmi: Fix priv initialization in scmi_clk_gate()   Peng Fan
• [GIT PULL] Please pull fsl-qoriq-next-2025-12-11 for next   Peng Fan
• [PATCH] armv8/fsl-layerscape: fdt: Remove offline cores from cooling device maps   Peng Fan
• [GIT PULL] Please pull mmc-next-2025-12-11 for next   Peng Fan
• [PATCH 0/2] clk: scmi: Fix name defer   Peng Fan
• [PATCH 0/2] clk: scmi: Fix name defer   Peng Fan
• [GIT PULL] please pull scmi-master-2025-12-17   Peng Fan
• [PATCH] omap_hsmmc: Support CONFIG_MMC_BROKEN_CD   Peng Fan
• [GIT PULL] please pull mmc-power-next-2025-12-24   Peng Fan
• unclear license identifiers   oliver Fendt
• [PATCH v1 2/9] riscv: dts: starfive: Add VisionFive 2 Lite board device tree   Hal Feng
• [PATCH v2 3/5] board: starfive: visionfive2: Add Orange Pi RV selection by product_id   Hal Feng
• [PATCH v2 4/5] configs: starfive: Add Orange Pi RV to visionfive2   Hal Feng
• [PATCH 1/3] board: phytec: phycore-imx93: Switch to standard boot   Primoz Fiser
• [PATCH 2/3] board: phytec: phycore-imx93: Set boot_targets dynamically   Primoz Fiser
• [PATCH 3/3] board: phytec: phycore-imx93: env: Add required uuu variables   Primoz Fiser
• [PATCH 1/3] board: phytec: phycore-imx93: Switch to standard boot   Primoz Fiser
• [PATCH v2 1/3] board: phytec: phycore-imx93: Switch to standard boot   Primoz Fiser
• [PATCH v2 2/3] board: phytec: phycore-imx93: Set boot_targets dynamically   Primoz Fiser
• [PATCH v2 3/3] board: phytec: phycore-imx93: env: Add required uuu variables   Primoz Fiser
• [Upstream] [PATCH v2 2/3] board: phytec: phycore-imx93: Set boot_targets dynamically   Primoz Fiser
• Please pull net-20251201   Jerome Forissier
• Please pull net-next-20251201   Jerome Forissier
• [PATCH 1/1] cmd: lwip/wget: avoid NULL dereference in _set_cacert()   Jerome Forissier
• [PATCH] net: lwip: tftp: Fix filename handling   Jerome Forissier
• [PATCH] net:lwip: Add debug line to net-lwip   Jerome Forissier
• [PATCH 5/5] net: lwip: nfs: Port the NFS code to work with LWIP   Jerome Forissier
• [PATCH 4/5] net: nfs: Move most NFS code to common files   Jerome Forissier
• [PATCH 3/5] net: nfs: Add licence header   Jerome Forissier
• [PATCH 2/5] net: Move some variables to net-common files   Jerome Forissier
• [PATCH 1/5] net: move net_state to net-common   Jerome Forissier
• [PATCH 0/5] net: Port NFS to LWIP   Jerome Forissier
• [PATCH 5/5] net: lwip: nfs: Port the NFS code to work with LWIP   Jerome Forissier
• [PATCH v2 1/6] net: move net_state to net-common   Jerome Forissier
• [PATCH v2 2/6] net: Move some variables to net-common files   Jerome Forissier
• [PATCH v2 5/6] net: lwip: nfs: Port the NFS code to work with lwIP   Jerome Forissier
• [PATCH v2 6/6] configs: qemu_arm64_lwip_defconfig: enable CMD_NFS   Jerome Forissier
• [PATCH v2] cmd: bdinfo: fix incorrect Kconfig options check for print_eth()   Jerome Forissier
• [PATCH] spl: fix incorrect dependency for SPL_NET   Jerome Forissier
• Please pull net-20251218   Jerome Forissier
• [PATCH] doc: pytest: fix typo in multiple config options example for buildconfigspec   Jérôme Forissier
• [PATCH v1 1/1] arch/arm/mach-zynqmp: configure default BL32_LOAD_ADDR   Neal Frager
• [PATCH] ram: ti: k3-ddrss: Add workaround sequence for errata i2487   Sebin Francis
• [PATCH] i2c: stm32f7_i2c: save some ms in stm32_i2c_choose_solution   Richard GENOUD
• [PATCH] cmd: part: Fix part argument description for `part number`   Jonathan GUILLOT
• [PATCH] video: simple_panel: add support for "rocktech,rk043fn48h" display   Raphael Gallais-Pou
• [PATCH] video: stm32: ltdc: add .of_to_plat callback   Raphael Gallais-Pou
• [PATCH 1/3] mmc: msm_sdhci: Fix incorrect divider calculation for SDCLK   Sumit Garg
• [PATCH 2/3] clk/qcom: qcm2290: Add SDCC1 apps clock frequency table   Sumit Garg
• [PATCH] phy: Add MSM8996 support to Qualcomm QUSB2 phy   Sumit Garg
• [RESEND v2 1/6] clk/qcom: Add USB related clocks for IPQ9574   Sumit Garg
• [RESEND v2 2/6] phy: Add IPQ9574 support to Qualcomm QUSB2 phy   Sumit Garg
• [RESEND v2 3/6] phy: qcom: Add QMP USB PHY driver   Sumit Garg
• [RESEND v2 4/6] configs: ipq9574: Enable fastboot support   Sumit Garg
• [RESEND v2 5/6] dts: ipq9574-rdp433-u-boot: Enable USB device mode and MMC   Sumit Garg
• [RESEND v2 6/6] doc: board/qualcomm: Update RDP flashing instructions   Sumit Garg
• [RESEND v2 6/6] doc: board/qualcomm: Update RDP flashing instructions   Sumit Garg
• [PATCH v2 1/7] drivers: clk: qcom: sc7280: Add USB3 PHY pipe clock   Sumit Garg
• [PATCH v2 2/7] drivers: usb: dwc3: Add delay after core soft reset   Sumit Garg
• [PATCH v2 2/7] drivers: usb: dwc3: Add delay after core soft reset   Sumit Garg
• [PATCH v2] usb: gadget: Kconfig: Correct Qualcomm config name used   Sumit Garg
• [PATCH v1 0/2] pinctrl: qcom: Make pinctrl drivers default y   Sumit Garg
• [PATCH v7 1/4] power-domain: Add QCOM RPMH Power Domain Driver Support   Sumit Garg
• [PATCH v1] dts: qcs6490-rb3gen2: Switch USB controller to peripheral mode   Sumit Garg
• [PATCH v1 1/3] arm: dts: qcs615-ride: Remove unsupported USB clock reference   Sumit Garg
• [PATCH v1 3/3] phy: qcom: qusb2: Add QCS615 QUSB2 PHY support   Sumit Garg
• [PATCH v1 2/3] clk: qcom: qcs615: Add GCC_AHB2PHY_WEST_CLK clock support   Sumit Garg
• [PATCH v1] smem: msm: Fix memory-region lookup, direct <reg> mapping and update SMEM host count   Sumit Garg
• [PATCH v1] pinctrl: qcom: Add pingroup definitions for SC7280   Sumit Garg
• [PATCH v2 4/7] arch: arm: mach-snapdragon: Make USB speed fixup configurable   Sumit Garg
• [PATCH v1 0/2] pinctrl: qcom: Make pinctrl drivers default y   Sumit Garg
• [PATCH v2 1/5] dt-bindings: riscv: starfive: add xunlong,orangepi-rv   Sumit Garg
• [PATCH v2 2/5] riscv: dts: starfive: add Orange Pi RV   Sumit Garg
• [PATCH 1/2] mach-snapdragon: of_fixup: Add OP-TEE DT fixup support   Sumit Garg
• [PATCH 2/2] configs: Add generic qcom_tfa_optee_defconfig   Sumit Garg
• [PATCH] nitrogen6x: change maintainer   Simon Gaynor
• [PATCH v2] nitrogen6x: change maintainer   Simon Gaynor
• [PATCH] i2c: stm32f7_i2c: save some ms in stm32_i2c_choose_solution   Richard Genoud
• [PATCH] imx: Revert "imx: mx6ull: fix REFTOP_VBGADJ setting" and fix comments   Emanuele Ghidoli
• [PATCH v1] toradex: tdx-cfg-block: add pid4 support for new modules   Emanuele Ghidoli
• [PATCH] riscv: Add support for BeagleV-Fire   Jamie Gibbons
• [PATCH] dm: core: Create ofnode stubs when OF_REAL is disabled   Simon Glass
• [PATCH v3 4/4] tools: binman: fit: add tests for signing with an OpenSSL engine   Simon Glass
• [PATCHv2] boot/image-fit.c: Resort to using malloc for USE_HOSTCC   Simon Glass
• Dropping macOS and Windows host tool builds and support in U-Boot   Simon Glass
• [PATCH v3 4/4] tools: binman: fit: add tests for signing with an OpenSSL engine   Simon Glass
• [PATCH v3 4/4] tools: binman: fit: add tests for signing with an OpenSSL engine   Simon Glass
• Dropping macOS and Windows host tool builds and support in U-Boot   Simon Glass
• Synced invitation: U-Boot community meeting @ Every 2 weeks from 9am to 10am on Tuesday (MDT) (u-boot at lists.denx.de)   Simon Glass
• Synced invitation: U-Boot community meeting @ Every 2 weeks from 8am to 9am on Tuesday (MST) (u-boot at lists.denx.de)   Simon Glass
• Synced invitation: U-Boot community meeting @ Tue 9 Dec 2025 8am - 9am (MST) (u-boot at lists.denx.de)   Simon Glass
• Synced invitation: U-Boot community meeting @ Tue 25 Nov 2025 8am - 9am (MST) (u-boot at lists.denx.de)   Simon Glass
• [PATCH 3/3] dm: core: Default to using DEVRES outside of xPL   Simon Glass
• [PATCH 3/3] dm: core: Default to using DEVRES outside of xPL   Simon Glass
• [PATCH 3/3] dm: core: Default to using DEVRES outside of xPL   Simon Glass
• [PATCH] dm: core: Create ofnode stubs when OF_REAL is disabled   Simon Glass
• [RFC 1/8] trace: correct handling of recursive call   Simon Glass
• [RFC 2/8] trace: initr_trace must succeed initr_dm   Simon Glass
• [RFC 4/8] trace: increase TRACE_CALL_DEPTH_LIMIT   Simon Glass
• [RFC 5/8] cmd/meminfo: display of addresses above 4 GiB   Simon Glass
• [RFC 6/8] test: cmd: consider configuration in meminfo test   Simon Glass
• [RFC 7/8] test: initf_malloc is only traced with EARLY_TRACE   Simon Glass
• [PATCH] common: cli_hush: clear Ctrl-C pressed flag before exiting loop commands   Simon Glass
• [RFC 8/8] test: clean up test_trace.py code   Simon Glass
• [RFC 0/8] trace: improve support   Simon Glass
• [PATCH v2 1/3] test.py: check ubconfig exists before using it   Simon Glass
• [PATCH v2 2/3] doc: pytest: mention additional requirements for venv   Simon Glass
• [PATCH v2 3/3] pylibfdt: add requirements.txt for setuptools   Simon Glass
• [PATCH 2/2] binman: Accept pkcs11 URI tokens for capsule updates   Simon Glass
• [PATCH 4/8] boot: fix prompt for VPL_LOAD_FIT_FULL   Simon Glass
• [PATCH v4 1/2] fdtdec: Add declaration for get_next_memory_node() helper   Simon Glass
• [PATCH] dm: core: Create ofnode stubs when OF_REAL is disabled   Simon Glass
• [PATCH] dm: core: Create ofnode stubs when OF_REAL is disabled   Simon Glass
• [RFC 1/8] trace: correct handling of recursive call   Simon Glass
• [PATCH 1/1] .gitignore: add vpl/   Simon Glass
• [PATCH] dm: core: Create ofnode stubs when OF_REAL is disabled   Simon Glass
• [PATCH 0/4] fix integer overflows in filesystem code   Simon Glass
• Standard Boot integration - script validation before execution   Simon Glass
• [PATCH 1/1] video: correct label for cyclic video_idle   Simon Glass
• [PATCH 1/1] video: menu "TrueType Fonts" depends on TrueType enabled   Simon Glass
• [PATCH 1/1] doc: describe QEMU VGA emulation   Simon Glass
• [PATCH 1/1] cmd: command `font` should depend on CONSOLE_TRUETYPE   Simon Glass
• [PATCH] net:lwip: Add debug line to net-lwip   Andrew Goodbody
• [PATCH] net: lwip: tftp: Fix filename handling   Andrew Goodbody
• [PATCH 0/5] net: Port NFS to LWIP   Andrew Goodbody
• [PATCH 1/5] net: move net_state to net-common   Andrew Goodbody
• [PATCH 2/5] net: Move some variables to net-common files   Andrew Goodbody
• [PATCH 3/5] net: nfs: Add licence header   Andrew Goodbody
• [PATCH 4/5] net: nfs: Move most NFS code to common files   Andrew Goodbody
• [PATCH 5/5] net: lwip: nfs: Port the NFS code to work with LWIP   Andrew Goodbody
• [PATCH v2 0/3] clk: Return value calculated by ERR_PTR   Andrew Goodbody
• [PATCH 5/5] net: lwip: nfs: Port the NFS code to work with LWIP   Andrew Goodbody
• [PATCH 2/5] net: Move some variables to net-common files   Andrew Goodbody
• [PATCH 0/5] net: Port NFS to LWIP   Andrew Goodbody
• [PATCH] Revert "clk: Return value calculated by ERR_PTR"   Andrew Goodbody
• [PATCH v2 0/6] net: Port NFS to lwIP   Andrew Goodbody
• [PATCH v2 1/6] net: move net_state to net-common   Andrew Goodbody
• [PATCH v2 2/6] net: Move some variables to net-common files   Andrew Goodbody
• [PATCH v2 3/6] net: nfs: Add licence header   Andrew Goodbody
• [PATCH v2 4/6] net: nfs: Move most NFS code to common files   Andrew Goodbody
• [PATCH v2 5/6] net: lwip: nfs: Port the NFS code to work with lwIP   Andrew Goodbody
• [PATCH v2 6/6] configs: qemu_arm64_lwip_defconfig: enable CMD_NFS   Andrew Goodbody
• [PATCH 1/1] efi_selftest: enhance LoadImage test   Andrew Goodbody
• [PATCH 0/5] rockchip: sdram: allow reading memory info from TPL on non-ARM64   Aaron Griffith
• [PATCH 1/5] rockchip: sdram: add option to read bank information from TPL   Aaron Griffith
• [PATCH 2/5] rockchip: sdram: remove redundant configuration checks   Aaron Griffith
• [PATCH 3/5] rockchip: sdram: allow config headers to override ATAGs location   Aaron Griffith
• [PATCH 4/5] rockchip: sdram: refactor bi_dram logic into separate function   Aaron Griffith
• [PATCH 5/5] rockchip: sdram: only reserve BL31 and use mem_map on ARM64   Aaron Griffith
• [PATCH 0/5] rockchip: sdram: allow reading memory info from TPL on non-ARM64   Aaron Griffith
• [PATCH 0/5] rockchip: sdram: allow reading memory info from TPL on non-ARM64   Aaron Griffith
• [PATCH 2/2] imx: Support i.MX91 11x11 FRDM board   Joseph Guo
• [PATCH 2/2] imx: Support i.MX91 11x11 FRDM board   Joseph Guo
• [PATCH 2/2] imx: Support i.MX91 11x11 FRDM board   Joseph Guo
• [PATCH v2 0/2] Add FRDM-IMX91 initial support   Joseph Guo
• [PATCH v2 1/2] arm64: dts: add NXP FRDM-IMX91 device tree   Joseph Guo
• [PATCH v2 2/2] imx: Support i.MX91 11x11 FRDM board   Joseph Guo
• [PATCH v2 0/2] Add FRDM-IMX91 initial support   Joseph Guo
• [PATCH v3 0/2] Add FRDM-IMX91 initial support   Joseph Guo
• [PATCH v3 1/2] arm64: dts: add NXP FRDM-IMX91 device tree   Joseph Guo
• [PATCH v3 2/2] imx: Support i.MX91 11x11 FRDM board   Joseph Guo
• [PATCH v4 0/2] Add FRDM-IMX91 initial support   Joseph Guo
• [PATCH v4 1/2] arm64: dts: add NXP FRDM-IMX91 device tree   Joseph Guo
• [PATCH v4 2/2] imx: Support i.MX91 11x11 FRDM board   Joseph Guo
• [PATCH v3 0/2] Support EFI capsule updates across Amlogic boards   Ferass El Hafidi
• [PATCH v3 1/2] arm: meson: add support for EFI capsule updates   Ferass El Hafidi
• [PATCH v3 2/2] board: libre-computer: use common Amlogic EFI capsule support   Ferass El Hafidi
• [PATCH v3 0/2] Support EFI capsule updates across Amlogic boards   Ferass El Hafidi
• [PATCH v4 0/2] Support EFI capsule updates across Amlogic boards   Ferass El Hafidi
• [PATCH v4 1/2] arm: meson: add support for EFI capsule updates   Ferass El Hafidi
• [PATCH v4 2/2] board: libre-computer: use common Amlogic EFI capsule support   Ferass El Hafidi
• [PATCH v4 1/2] arm: meson: add support for EFI capsule updates   Ferass El Hafidi
• [PATCH v2] arm: meson: add support for EFI capsule updates   Ferass El Hafidi
• [PATCH 1/3] board: phytec: phycore-imx93: Switch to standard boot   Benjamin Hahn
• [PATCH 1/3] arm: mach-k3: j721s2: Provide a way to obtain boot device for non SPLs   Dominik Haller
• [PATCH 2/3] board: phytec: Add PHYTEC phyCORE-AM68x/TDA4x SoM   Dominik Haller
• [PATCH 3/3] doc: board: phytec: Add phyCORE-AM68x/TDA4x   Dominik Haller
• [PATCH] bootm: fix boot failure from compressed image for IH_OS_EFI   Kunihiko Hayashi
• SuperSpeed on STM32MP257 - Comobphy   Jackson Hener
• SuperSpeed on STM32MP257 - Comobphy   Jackson Hener
• [PATCH v2] Add 'bootsource' /chosen property   Rob Herring
• [PATCHv2 1/1] corstone1000: Add Cortex-A320 support on FVP   Rob Herring
• [PATCH] common: spl: Enable Instruction cache after relocation in board_init_r   Ernest Van Hoecke
• Placement of FDT in memory   Yuri Honegger
• [PULL] u-boot-at91-fixes-2026.01-a   Eugen Hristev
• [PATCH v6 06/12] video: rockchip: Add VOP2 support   Dang Huynh
• [PATCH v6 06/12] video: rockchip: Add VOP2 support   Dang Huynh
• [PATCH v6 06/12] video: rockchip: Add VOP2 support   Dang Huynh
• [PATCH] net: mvpp2: fix NULL pointer dereference in mvpp2_phy_connect   Vincent Jardin
• [PATCH v2 2/3] rockchip: make rksd the default format for SPI images   Johan Jonker
• [PATCH v2 0/3] Support for a generic platform for all Exynos mobile devices   Minkyu Kang
• please pull u-boot-samsung master   Minkyu Kang
• [PATCH] rockchip: rk356x: Stop overriding sdhci/mmc aliases   Jonas Karlman
• [PATCH 1/4] common/spl: fit: Avoid directly loading images to load_addr   Jonas Karlman
• [PATCH 1/4] common/spl: fit: Avoid directly loading images to load_addr   Jonas Karlman
• [PATCH v2 2/3] rockchip: make rksd the default format for SPI images   Jonas Karlman
• [PATCH v2 2/3] rockchip: make rksd the default format for SPI images   Jonas Karlman
• [PATCH 0/5] rockchip: sdram: allow reading memory info from TPL on non-ARM64   Jonas Karlman
• [PATCH 0/5] rockchip: sdram: allow reading memory info from TPL on non-ARM64   Jonas Karlman
• [PATCH v2 0/9] mmc: sdhci-cadence: Improvements and fixes for Cadence SDHCI driver   Tanmay Kathpalia
• [PATCH v2 1/9] mmc: sdhci-cadence: Add reset control support   Tanmay Kathpalia
• [PATCH v2 2/9] mmc: mmc-uclass: Use max-frequency from device tree with default handling   Tanmay Kathpalia
• [PATCH v2 3/9] mmc: sdhci-cadence: Use max-frequency property from device tree   Tanmay Kathpalia
• [PATCH v2 4/9] mmc: sdhci-cadence: Set controller and PHY speed modes for SD and eMMC cards   Tanmay Kathpalia
• [PATCH v2 5/9] mmc: sdhci: Add SDHCI_SPEC_400, _410, and _420 version defines   Tanmay Kathpalia
• [PATCH v2 6/9] mmc: sdhci-cadence: Use hardware version field for Cadence SDHCI controller   Tanmay Kathpalia
• [PATCH v2 7/9] mmc: sdhci-cadence: Enable software tuning for both SD and eMMC interfaces   Tanmay Kathpalia
• [PATCH v2 8/9] mmc: sdhci-cadence6: socfpga: Fix DT property naming convention   Tanmay Kathpalia
• [PATCH v2 9/9] mmc: sdhci-cadence6: Add DLL master control and improve tuning reliability   Tanmay Kathpalia
• [PATCH v1 0/4] socfpga: agilex5: SDHCI controller correction and feature enablement   Tanmay Kathpalia
• [PATCH v1 1/4] Revert "arch: arm: dts: agilex5: Set SDIO_SEL GPIO pin as output"   Tanmay Kathpalia
• [PATCH v1 2/4] arm: dts: socfpga: agilex5: Upgrade SDHCI controller from SD4HC to SD6HC   Tanmay Kathpalia
• [PATCH v1 3/4] configs: socfpga_agilex5: Enable MMC and Cadence SDHCI support   Tanmay Kathpalia
• [PATCH v1 4/4] arm: dts: socfpga: agilex5: Add dedicated eMMC device tree support   Tanmay Kathpalia
• [PATCH] ram: ti: k3-ddrss: Add workaround sequence for errata i2487   Akashdeep Kaur
• [PATCH 0/2] RISC-V: implement private GCC library   Mark Kettenis
• Dropping macOS and Windows host tool builds and support in U-Boot   Mark Kettenis
• Dropping macOS and Windows host tool builds and support in U-Boot   Mark Kettenis
• Dropping macOS and Windows host tool builds and support in U-Boot   Mark Kettenis
• [PATCH v2 0/5] Fixes for CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION* and for SOCFPGA   Jan Kiszka
• [PATCH v2 1/5] spl: Kconfig: Add missing SPL_LOAD_BLOCK for SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE   Jan Kiszka
• [PATCH v2 2/5] spl: mmc: Account for SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE being a choice   Jan Kiszka
• [PATCH v2 3/5] spl: mmc: Respect sector value passed to mmc_load_image_raw_partition   Jan Kiszka
• [PATCH v2 4/5] arch: arm: mach-socfpga: Adjust a raw sectors for MMC loading of U-Boot from SPL   Jan Kiszka
• [PATCH v2 5/5] configs: socfpga: Fix de0_nano_soc boot   Jan Kiszka
• [PATCH v2] Fix socfpga GEN5 boot by spl+u-boot sfp on RAW   Jan Kiszka
• [PATCH] arch: arm: mach-socfpga: Fix non-Agilex targets   Jan Kiszka
• [PATCH] arch: arm: mach-socfpga: Fix non-Agilex targets   Jan Kiszka
• [PATCH v2 2/5] spl: mmc: Account for SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE being a choice   Jan Kiszka
• [PATCH v2 4/5] arch: arm: mach-socfpga: Adjust a raw sectors for MMC loading of U-Boot from SPL   Jan Kiszka
• [PATCH v3 0/5] Fixes for CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION* and for SOCFPGA   Jan Kiszka
• [PATCH v3 1/5] spl: Kconfig: Add missing SPL_LOAD_BLOCK for SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE   Jan Kiszka
• [PATCH v3 2/5] spl: mmc: Account for SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE being a choice   Jan Kiszka
• [PATCH v3 3/5] spl: mmc: Respect sector value passed to mmc_load_image_raw_partition   Jan Kiszka
• [PATCH v3 4/5] arch: arm: mach-socfpga: Adjust a raw sectors for MMC loading of U-Boot from SPL   Jan Kiszka
• [PATCH v3 5/5] configs: socfpga: Fix de0_nano_soc boot   Jan Kiszka
• [PATCH v2] configs: socfpga: Permit EFI booting   Jan Kiszka
• [PATCH] riscv: Add support for BeagleV-Fire   Jan Kiszka
• [PATCH] riscv: Add support for BeagleV-Fire   Jan Kiszka
• [PATCH 1/2] usb: ci_udc: Check ci_ep->desc before use   Mattijs Korpershoek
• [GIT PULL] Please pull u-boot-dfu-next-20251203 into next   Mattijs Korpershoek
• [PATCH v2] doc: board: ti: Add J742S2 support   Mattijs Korpershoek
• [PATCH v3 1/2] boot: android: Always use 8-byte aligned DT with libfdt   Mattijs Korpershoek
• [PATCH v3] doc: board: ti: Add J742S2 support   Mattijs Korpershoek
• [PATCH v2] Add support for OpenSSL Provider API   Mattijs Korpershoek
• [PATCH v2 1/2] arm: mediatek: add support for MediaTek MT8188 SoC   Mattijs Korpershoek
• [PATCH v2 2/2] clk: mediatek: add MT8188 clock driver   Mattijs Korpershoek
• [GIT PULL] Please pull u-boot-dfu-next-20251211 into next   Mattijs Korpershoek
• [PATCH v2 2/2] clk: mediatek: add MT8188 clock driver   Mattijs Korpershoek
• [PATCH master] doc: board: ti: fix alt name for tispl.bin in DFU mode   Mattijs Korpershoek
• [PATCH v2 0/3] a few test.py improvements   Mattijs Korpershoek
• [PATCH] doc: pytest: fix typo in multiple config options example for buildconfigspec   Mattijs Korpershoek
• [PATCH] boot: fix missing dependency for BOOTMETH_ANDROID   Mattijs Korpershoek
• [PATCH v2] Add support for OpenSSL Provider API   Eddie Kovsky
• Rockchip RK3399 SOC is very slow   Victor Krawiec
• Rockchip RK3399 SOC is very slow   Victor Krawiec
• [PATCH 00/19] net: airoha: PCS and MDIO support for Airoha AN7581 SoC   Mikhail Kshevetskiy
• [PATCH 01/19] net: mdio-mt7531-mmio: fix switch regs initialization   Mikhail Kshevetskiy
• [PATCH 02/19] net: airoha: add initial support for multiple GDM port   Mikhail Kshevetskiy
• [PATCH 03/19] net: airoha: allocate string for GDM port name   Mikhail Kshevetskiy
• [PATCH 04/19] net: airoha: declare airoha_eth_port as U_BOOT_DRIVER()   Mikhail Kshevetskiy
• [PATCH 05/19] net: airoha: do not call airoha_fe_init() from GDM port independent code   Mikhail Kshevetskiy
• [PATCH 06/19] net: airoha: init switch before GDM port initialization   Mikhail Kshevetskiy
• [PATCH 07/19] net: airoha: add support for Airoha PCS driver   Mikhail Kshevetskiy
• [PATCH 08/19] net: airoha: pcs: improve/fix building rules   Mikhail Kshevetskiy
• [PATCH 09/19] net: pcs-airoha: unify code using SCU regmap helper   Mikhail Kshevetskiy
• [PATCH 10/19] net: airoha-pcs: an7581: sync with linux code a bit   Mikhail Kshevetskiy
• [PATCH 11/19] airoha: add GDM1 sub-node into EN7523 ethernet controller node   Mikhail Kshevetskiy
• [PATCH 12/19] airoha: add PCS node for AN7581   Mikhail Kshevetskiy
• [PATCH 13/19] configs: enable PCS for Airoha AN7581   Mikhail Kshevetskiy
• [PATCH 14/19] net: airoha: fill in support for PCS/PHY in Airoha Ethernet driver   Mikhail Kshevetskiy
• [PATCH 15/19] net: airoha: makes PCS support optional   Mikhail Kshevetskiy
• [PATCH 16/19] net: airoha: bind MDIO controller on Ethernet load   Mikhail Kshevetskiy
• [PATCH 17/19] net: airoha: use mt7531 mdio for GDM1   Mikhail Kshevetskiy
• [PATCH 18/19] airoha: add mdio child node to switch node   Mikhail Kshevetskiy
• [PATCH 19/19] airoha: enable DM_MDIO and MDIO CMD by default   Mikhail Kshevetskiy
• [PATCH RESEND 00/19] net: airoha: PCS and MDIO support for Airoha AN7581 SoC   Mikhail Kshevetskiy
• [PATCH RESEND 01/19] net: mdio-mt7531-mmio: fix switch regs initialization   Mikhail Kshevetskiy
• [PATCH RESEND 02/19] net: airoha: add initial support for multiple GDM port   Mikhail Kshevetskiy
• [PATCH RESEND 03/19] net: airoha: allocate string for GDM port name   Mikhail Kshevetskiy
• [PATCH RESEND 04/19] net: airoha: declare airoha_eth_port as U_BOOT_DRIVER()   Mikhail Kshevetskiy
• [PATCH RESEND 05/19] net: airoha: do not call airoha_fe_init() from GDM port independent code   Mikhail Kshevetskiy
• [PATCH RESEND 06/19] net: airoha: init switch before GDM port initialization   Mikhail Kshevetskiy
• [PATCH RESEND 07/19] net: airoha: add support for Airoha PCS driver   Mikhail Kshevetskiy
• [PATCH RESEND 08/19] net: airoha: pcs: improve/fix building rules   Mikhail Kshevetskiy
• [PATCH RESEND 09/19] net: pcs-airoha: unify code using SCU regmap helper   Mikhail Kshevetskiy
• [PATCH RESEND 10/19] net: airoha-pcs: an7581: sync with linux code a bit   Mikhail Kshevetskiy
• [PATCH RESEND 11/19] airoha: add GDM1 sub-node into EN7523 ethernet controller node   Mikhail Kshevetskiy
• [PATCH RESEND 12/19] airoha: add PCS node for AN7581   Mikhail Kshevetskiy
• [PATCH RESEND 13/19] configs: enable PCS for Airoha AN7581   Mikhail Kshevetskiy
• [PATCH RESEND 14/19] net: airoha: fill in support for PCS/PHY in Airoha Ethernet driver   Mikhail Kshevetskiy
• [PATCH RESEND 15/19] net: airoha: makes PCS support optional   Mikhail Kshevetskiy
• [PATCH RESEND 16/19] net: airoha: bind MDIO controller on Ethernet load   Mikhail Kshevetskiy
• [PATCH RESEND 17/19] net: airoha: use mt7531 mdio for GDM1   Mikhail Kshevetskiy
• [PATCH RESEND 18/19] airoha: add mdio child node to switch node   Mikhail Kshevetskiy
• [PATCH RESEND 19/19] airoha: enable DM_MDIO and MDIO CMD by default   Mikhail Kshevetskiy
• [PATCH v4 08/10] configs: j742s2_evm_r5_defconfig: Disable PCIe boot configs   Kumar, Udit
• [PATCH v4 06/10] configs: am69_sk_r5_defconfig: Disable PCIe boot configs   Kumar, Udit
• [PATCH v4 10/10] docs: board: ti: j784s4_evm: Add PCIe boot documentation   Kumar, Udit
• [PATCH v2] arm: mach-k3: j722s: Fix eMMC boot functionality broken by Ethernet boot   Kumar, Udit
• [PATCH v3] arm: mach-k3: j722s: Fix eMMC boot functionality broken by Ethernet boot   Kumar, Udit
• [PATCH] doc: board: ti: Add J742S2 support   Udit Kumar
• [PATCH] doc: board: ti: Add J742S2 support   Kumar, Udit
• [PATCH v2] doc: board: ti: Add J742S2 support   Udit Kumar
• [PATCH v2] doc: board: ti: Add J742S2 support   Kumar, Udit
• [PATCH v3] doc: board: ti: Add J742S2 support   Udit Kumar
• [PATCH v7 03/13] arm: mach-k3: Remove CANUART IO isolation   Kumar, Udit
• [PATCH v7 02/13] arm: mach-k3: common: Add CANUART wakeup check helpers   Kumar, Udit
• [PATCH v7 04/13] ram: k3-ddrss: Add support for DDR in self-refresh   Kumar, Udit
• [PATCH v7 05/13] firmware: ti_sci: Add TI_SCI_MSG_MIN_CONTEXT_RESTORE   Kumar, Udit
• [PATCH v7 06/13] arm: mach-k3: common: Add lpm_resume_from_ddr   Kumar, Udit
• [PATCH v7 07/13] arm: mach-k3: common: Helper for LPM meta data address from DT   Kumar, Udit
• [PATCH v7 08/13] arm: mach-k3: am62a7_init: Resume on LPM exit   Kumar, Udit
• [PATCH v7 09/13] arm: mach-k3: am62p5_init: Resume on LPM exit   Kumar, Udit
• [PATCH v7 10/13] arm: dts: k3-am62a: Add r5 device nodes   Kumar, Udit
• [PATCH v7 11/13] arm: dts: k3-am62p: Add r5 device nodes   Kumar, Udit
• [PATCH v7 12/13] configs: am62ax_evm_r5: Enable IODDR resume support   Kumar, Udit
• [PATCH v7 13/13] configs: am62p_evm_r5_defconfig: Enable IODDR resume support   Kumar, Udit
• [PATCH 2/8] boot: fix prompt for SPL_LOAD_FIT_ADDRESS   Kumar, Udit
• [PATCH 4/8] boot: fix prompt for VPL_LOAD_FIT_FULL   Kumar, Udit
• [PATCH 7/8] power: regulator: fix dependency for REGULATOR_PWM   Kumar, Udit
• [PATCH 2/8] boot: fix prompt for SPL_LOAD_FIT_ADDRESS   Kumar, Udit
• [PATCH] arm: dts: k3-j7200: Extend firewall for ATF region to TIFS   Kumar, Udit
• [PATCH v8 08/13] arm: mach-k3: am62a7_init: Resume on LPM exit   Kumar, Udit
• [PATCH v8 09/13] arm: mach-k3: am62p5_init: Resume on LPM exit   Kumar, Udit
• [PATCH v8 00/13] am62: IO+DDR resume support   Kumar, Udit
• [PATCH v2 06/10] gpio: a733: add initial support   Yixun Lan
• [PATCH] arm: dts: mediatek: switch mt8365 to OF_UPSTREAM   David Lechner
• [PATCH RESEND] arm: dts: mediatek: switch mt8365 to OF_UPSTREAM   David Lechner
• [PATCH v2 2/2] clk: mediatek: add MT8188 clock driver   David Lechner
• [PATCH v2 2/2] clk: mediatek: add MT8188 clock driver   David Lechner
• [PATCH] clk: mediatek: remove duplicate '@parent' field doc   David Lechner
• [PATCH] clk: mediatek: remove CLOCK_PARENT_* aliases   David Lechner
• [PATCH v2 2/2] clk: mediatek: add MT8188 clock driver   David Lechner
• [PATCH] pwm: aspeed: replace %pe in dev_err()   David Lechner
• [PATCH v2 0/3] a few test.py improvements   David Lechner
• [PATCH v2 1/3] test.py: check ubconfig exists before using it   David Lechner
• [PATCH v2 2/3] doc: pytest: mention additional requirements for venv   David Lechner
• [PATCH v2 3/3] pylibfdt: add requirements.txt for setuptools   David Lechner
• [PATCH 0/8] clk: mediatek: implement of_xlate and dump   David Lechner
• [PATCH 1/8] clk: mediatek: add array size fields to clk trees   David Lechner
• [PATCH 2/8] clk: mediatek: add array size fields to cg gates   David Lechner
• [PATCH 3/8] clk: mediatek: add array size field for id_offs_map   David Lechner
• [PATCH 4/8] clk: mediatek: organize infrasys functions   David Lechner
• [PATCH 5/8] clk: mediatek: add of_xlate ops   David Lechner
• [PATCH 6/8] clk: mediatek: clarify mapped vs. unmapped ID   David Lechner
• [PATCH 7/8] clk: mediatek: mt7623: set unmapped IDs to -1   David Lechner
• [PATCH 8/8] clk: mediatek: implement dump callbacks   David Lechner
• [PATCH 0/9] clk: mediatek: mt8365: fix clocks   David Lechner
• [PATCH 1/9] mt8365_evk_defconfig: enable clk command   David Lechner
• [PATCH 2/9] clk: mediatek: mt8365: fix missing and out of order clocks   David Lechner
• [PATCH 3/9] clk: mediatek: add separate gates_offs for cg gates   David Lechner
• [PATCH 4/9] clk: mediatek: fix fixed clock parents   David Lechner
• [PATCH 5/9] clk: mediatek: mt8365: fix some clock parents   David Lechner
• [PATCH 6/9] clk: mediatek: mt8365: split struct mtk_clk_tree   David Lechner
• [PATCH 7/9] clk: mediatek: allow gates in topckgen drivers   David Lechner
• [PATCH 8/9] clk: mediatek: mt8365: remove separate topckgen-cg driver   David Lechner
• [PATCH 9/9] clk: mediatek: mt8365: fix missing topckgen IDs   David Lechner
• [PATCH] imx: Revert "imx: mx6ull: fix REFTOP_VBGADJ setting" and fix comments   Ye Li
• [PATCH v2] arm: imx: imx8m: soc: Add support for 'boot_device' and 'boot_instance' environment variablesAdd setup_boot_mode for imx8m   Ye Li
• [PATCH 1/2] riscv: create a custom CPU implementation for PolarFire SoC   Leo Liang
• [PATCH v1 2/9] riscv: dts: starfive: Add VisionFive 2 Lite board device tree   Leo Liang
• [PATCH v1 2/9] riscv: dts: starfive: Add VisionFive 2 Lite board device tree   Leo Liang
• [PATCH] ae350: Stop disabling device tree relocation   Leo Liang
• [PATCH 1/2] RISC-V: implement private GCC library   Leo Liang
• [PATCH 1/2] RISC-V: implement private GCC library   Leo Liang
• [PATCH] configs: starfive: enable wget https   Leo Liang
• [GIT PULL] u-boot-riscv/next   Leo Liang
• [PATCH 1/2] riscv: create a custom CPU implementation for PolarFire SoC   Leo Liang
• [PATCH v1 0/6] modify npcm7xx/8xx feature and bug fixed   Jim Liu
• [PATCH v1 1/6] watchdog: npcm: Support more timeout value   Jim Liu
• [PATCH v1 2/6] pinctrl: npcm8xx: Add smb11ddc pin config   Jim Liu
• [PATCH v1 3/6] pinctrl: npcm8xx: Remove incorrect spi0cs2_pins and spi0cs3_pins   Jim Liu
• [PATCH v1 4/6] dts: fix typo in the pin name of GPIO191/GPIO192   Jim Liu
• [PATCH v1 5/6] gpio: sgpio: modify persist check condition   Jim Liu
• [PATCH v1 6/6] arm: dts: Add SGPIO node in dts   Jim Liu
• How to boot u-boot from embedded ELF file in Microblaze core   Álvaro G. M.
• How to boot u-boot from embedded ELF file in Microblaze core   Álvaro G. M.
• [PATCH v2] arm: imx: imx8m: soc: Add support for 'boot_device' and 'boot_instance' environment variablesAdd setup_boot_mode for imx8m   William MARTIN
• [PATCH 0/6] board: ti: Add 32k crystal initialization   Vishal Mahaveer
• [PATCH 1/6] board: ti: am62x: Add basic initialization for 32k crystal   Vishal Mahaveer
• [PATCH 2/6] board: ti: am62ax: Add basic initialization for 32k crystal   Vishal Mahaveer
• [PATCH 3/6] board: ti: am62px: Add basic initialization for 32k crystal   Vishal Mahaveer
• [PATCH 4/6] configs: am62x_evm_a53_defconfig: Enable SPL_BOARD_INIT   Vishal Mahaveer
• [PATCH 5/6] configs: am62ax_evm_a53_defconfig: Enable SPL_BOARD_INIT   Vishal Mahaveer
• [PATCH 6/6] configs: am62px_evm_a53_defconfig: Enable SPL_BOARD_INIT   Vishal Mahaveer
• [PATCH v2 1/7] arm: dts: am335x-evm: Add backlight to the panel   Kory Maincent
• [PATCH v2 2/7] configs: am335x_evm_defconfig: Enable panel   Kory Maincent
• [PATCH v2 3/7] include: configs: am335x_evm: Enable vidconsole   Kory Maincent
• [PATCH v2 4/7] arm: dts: am335x-*-u-boot: Add chosen tick-timer   Kory Maincent
• [PATCH v2 5/7] am33xx: Fix comment about config symbols   Kory Maincent
• [PATCH v2 6/7] am33xx: Support upstream devicetree binding   Kory Maincent
• [PATCH v2 7/7] configs: am335x_evm_defconfig: Switch to upstream devicetree   Kory Maincent
• [PATCH v2 6/7] am33xx: Support upstream devicetree binding   Kory Maincent
• [PATCH 0/6] Add support for fwumdata   Kory Maincent
• [PATCH 1/6] tools: gitignore: Add mkfwumdata to the git ignore file   Kory Maincent
• [PATCH 2/6] tools: Reorganize mkfwumdata tool into fwumdata_src directory   Kory Maincent
• [PATCH 3/6] tools: mkfwumdata: Improve error message specificity   Kory Maincent
• [PATCH 4/6] tools: mkfwumdata: Add bank count validation for FWU metadata v2   Kory Maincent
• [PATCH 5/6] tools: Add support for fwumdata tool   Kory Maincent
• [PATCH 6/6] tools: mkfwumdata: Remove dependency on fwu_mdata.h header   Kory Maincent
• [PATCH 0/6] Add support for fwumdata   Kory Maincent
• [PATCH 0/6] Add support for fwumdata   Kory Maincent
• [PATCH 0/6] Add support for fwumdata   Kory Maincent
• [PATCH 0/6] Add support for fwumdata   Kory Maincent
• [PATCH 0/6] Add support for fwumdata   Kory Maincent
• [PATCH 2/2] clk: mediatek: add MT8188 clock driver   Kory Maincent
• [PATCH 2/2] clk: mediatek: add MT8188 clock driver   Kory Maincent
• [PATCH v3 5/9] am33xx: Avoid hard failure on USB probe issue   Kory Maincent
• [PATCH v3 8/9] am33xx: Support upstream devicetree USB device   Kory Maincent
• [PATCH v2 0/6] Add support for fwumdata   Kory Maincent
• [PATCH v2 1/6] tools: gitignore: Add mkfwumdata to the git ignore file   Kory Maincent
• [PATCH v2 2/6] tools: Reorganize mkfwumdata tool into fwumdata_src directory   Kory Maincent
• [PATCH v2 3/6] tools: mkfwumdata: Improve error message specificity   Kory Maincent
• [PATCH v2 4/6] tools: mkfwumdata: Add bank count validation for FWU metadata v2   Kory Maincent
• [PATCH v2 5/6] tools: Add support for fwumdata tool   Kory Maincent
• [PATCH v2 6/6] tools: mkfwumdata: Remove dependency on fwu_mdata.h header   Kory Maincent
• [PATCH 0/8] various Kconfig option changes   Kory Maincent
• [PATCH v2 0/6] Add support for fwumdata   Kory Maincent
• [PATCH] boot: fix missing dependency for BOOTMETH_ANDROID   Kory Maincent
• [PATCH 00/12] sc5xx: Add complete board support for all ADI SC5xx boards   Greg Malysa
• [PATCH 01/12] mach-sc5xx: Introduce Kconfig symbols for image addresses   Greg Malysa
• [PATCH 02/12] mach-sc5xx: Rename SC_BOOT_MODE   Greg Malysa
• [PATCH 03/12] mach-sc5xx: Kconfig: Make EZKIT and EZLITE carriers mutually exclusive   Greg Malysa
• [PATCH 04/12] mach-sc5xx: Add preliminary support for binman   Greg Malysa
• [PATCH 05/12] docker: add Analog Devices tools to docker image   Greg Malysa
• [PATCH 06/12] board: adi: Add SOMCRR infrastructure   Greg Malysa
• [PATCH 07/12] board: adi: Add support for SC573-ezkit   Greg Malysa
• [PATCH 08/12] board: adi: Add support for SC589 boards   Greg Malysa
• [PATCH 09/12] board: adi: Add support for SC584-ezkit   Greg Malysa
• [PATCH 10/12] board: adi: Add support for SC598   Greg Malysa
• [PATCH 11/12] board: adi: Add support for SC594   Greg Malysa
• [PATCH 12/12] MAINTAINERS: Update ADI entries for new boards   Greg Malysa
• [PATCH] arm: dts: k3-j7200: Extend firewall for ATF region to TIFS   Prasanth Babu Mantena
• [PATCH 1/4] arm: at91: move atmel_serial.h to include/dm/platform_data   Robert Marko
• [PATCH 2/4] dm: platform_data: atmel_serial: fix build warning on 64-bit platforms   Robert Marko
• [PATCH 3/4] serial: atmel-usart: include arch specific headers only for AT91   Robert Marko
• [PATCH 4/4] serial: atmel-usart: add support for skiping debug UART init   Robert Marko
• [PATCH] net: add Microsemi/Microchip MDIO driver   Robert Marko
• [PATCH 0/6] arm: k3: j722s: add PCIe support   George McCollister
• [PATCH 1/6] pci: skip unnecessary PCIe scanning   George McCollister
• [PATCH 2/6] phy: ti: j721e-wiz: Enable reference clock output in cmn_refclk_<p/m>   George McCollister
• [PATCH 3/6] phy: cadence-torrent: Add support to drive refclk out   George McCollister
• [PATCH 4/6] pci: pcie_cdns_ti: Add support to provide refclk to PCIe connector   George McCollister
• [PATCH 5/6] pci: pcie_cdns_ti: Add PCIe support for J722S SoC   George McCollister
• [PATCH 6/6] configs: j722s_evm_a53_defconfig: enable PCIe   George McCollister
• [PATCH 2/3] x86: Increase SYS_MALLOC_F_LEN to 0x1000   Bin Meng
• [PATCH v2 0/3] clk: Return value calculated by ERR_PTR   Nishanth Menon
• [PATCH v2 0/3] clk: Return value calculated by ERR_PTR   Nishanth Menon
• [PATCH v2 0/3] clk: Return value calculated by ERR_PTR   Nishanth Menon
• [PATCH v2 0/3] clk: Return value calculated by ERR_PTR   Nishanth Menon
• [PATCH] Revert "clk: Return value calculated by ERR_PTR"   Nishanth Menon
• [PATCH 1/2] net: phy: micrel_ksz90x1: disable asymmetric pause for KSZ9031   Max Merchel
• [PATCH v2 0/2] net: phy: micrel_ksz90x1: workarounds for ksz9031 ERRATA   Max Merchel
• [PATCH v2 1/2] net: phy: micrel_ksz90x1: disable asymmetric pause for KSZ9031 and KSZ9021   Max Merchel
• [PATCH v2 2/2] net: phy: micrel_ksz90x1: support forced GIGE master for KSZ9031   Max Merchel
• [BUG] Raxda Rock Pi 4A serial console output stops prematurely   Anand Moon
• [BUG] Raxda Rock Pi 4A serial console output stops prematurely   Anand Moon
• [PATCH 0/2] USB Fixes for Gadget Mode on DWC3   Chris Morgan
• [PATCH 1/2] usb: dwc3: gadget: Don't send unintended link state change   Chris Morgan
• [PATCH 2/2] usb: dwc3: core: improve reset sequence   Chris Morgan
• [PATCH] bootstd: android: Fix write outside of memory   Chris Morgan
• [PATCH v7 0/5] Added QCOM RPMH Power Domain Driver   Aswin Murugan
• [PATCH v7 1/4] power-domain: Add QCOM RPMH Power Domain Driver Support   Aswin Murugan
• [PATCH v7 2/4] power-domain: Add warning when power-domain driver is missing   Aswin Murugan
• [PATCH v7 3/4] mach-snapdragon: fixup power-domains   Aswin Murugan
• [PATCH v7 4/4] configs: qcom: Add QCOM_POWER_DOMAIN config   Aswin Murugan
• [PATCH v1 0/2] pinctrl: qcom: Make pinctrl drivers default y   Aswin Murugan
• [PATCH v1 1/2] pinctrl: qcom: Make pinctrl drivers default y based on architecture   Aswin Murugan
• [PATCH v1 2/2] configs: qcom_defconfig: Remove redundant pinctrl driver selections   Aswin Murugan
• [BUG] Raxda Rock Pi 4A serial console output stops prematurely   FUKAUMI Naoki
• [PATCH v6 3/5] power-domain: Add warning when power-domain driver is missing   Varadarajan Narayanan
• [PATCH v6 4/5] mach-snapdragon: fixup power-domains   Varadarajan Narayanan
• [PATCH v1] smem: msm: Fix memory-region lookup, direct <reg> mapping and update SMEM host count   Varadarajan Narayanan
• [PATCH v1] pinctrl: qcom: Add pingroup definitions for SC7280   Varadarajan Narayanan
• [RESEND v2 0/6] Enable fastboot support for IPQ9574 based boards   Varadarajan Narayanan
• [RESEND v2 1/6] clk/qcom: Add USB related clocks for IPQ9574   Varadarajan Narayanan
• [RESEND v2 2/6] phy: Add IPQ9574 support to Qualcomm QUSB2 phy   Varadarajan Narayanan
• [RESEND v2 3/6] phy: qcom: Add QMP USB PHY driver   Varadarajan Narayanan
• [RESEND v2 4/6] configs: ipq9574: Enable fastboot support   Varadarajan Narayanan
• [RESEND v2 5/6] dts: ipq9574-rdp433-u-boot: Enable USB device mode and MMC   Varadarajan Narayanan
• [RESEND v2 6/6] doc: board/qualcomm: Update RDP flashing instructions   Varadarajan Narayanan
• [PATCH v3 2/6] drivers: usb: dwc3: Add delay after core soft reset   Varadarajan Narayanan
• [PATCH v3 3/6] drivers: phy: qcom: Add QMP USB3-DP Combo PHY driver   Varadarajan Narayanan
• [PATCH v3 4/6] arch: arm: mach-snapdragon: Auto-detect USB SSPHY driver support   Varadarajan Narayanan
• [PATCH v3 5/6] configs: qcm6490: Enable super-speed USB support   Varadarajan Narayanan
• [PATCH v3 6/6] MAINTAINERS: Add entry for Qualcomm PHY drivers   Varadarajan Narayanan
• [RESEND v2 4/6] configs: ipq9574: Enable fastboot support   Varadarajan Narayanan
• [PATCH v7 2/4] power-domain: Add warning when power-domain driver is missing   Varadarajan Narayanan
• [RESEND v2 6/6] doc: board/qualcomm: Update RDP flashing instructions   Varadarajan Narayanan
• New Defects reported by Coverity Scan for Das U-Boot   Adriana Nicolae
• [PATCH] test: dm: fdtdec: Validate FDT size in unit test   Adriana Nicolae
• [PATCH v2] configs: am65x_usbdfu: add SPL_USE_TINY_PRINTF_POINTER_SUPPORT   Christoph Niedermaier
• [PATCH v5 0/3] Harmonize image size checks   Philip Oberfichtner
• [PATCH v5 0/3] Harmonize image size checks   Philip Oberfichtner
• [PATCH] net: ravb: Configure CXR31 and CXR35 on rzg2l   Mathieu Othacehe
• [PATCH] net: ravb: Configure CXR31 and CXR35 on rzg2l   Mathieu Othacehe
• [PATCH] watchdog: orion_wdt: Add support for armada-xp   Chris Packham
• mtd: nand: pxa3xx: Null de-references with dev_err()   Chris Packham
• [PATCH 0/3] arm: mvebu: Updates for xcat3   Chris Packham
• [PATCH 1/3] mtd: nand: pxa3xx: Use pr_err() in some places   Chris Packham
• [PATCH 2/3] arm: mvebu: db-xc3-24g4xg: Remove marvell, nand-keep-config   Chris Packham
• [PATCH 3/3] arm: mvebu: Add Allied Telesis x220   Chris Packham
• [PATCH 0/3] arm: mvebu: Updates for xcat3   Chris Packham
• [PATCH v2 1/3] mtd: nand: pxa3xx: Pass valid dev to dev_err()   Chris Packham
• [PATCH v2 2/3] arm: mvebu: db-xc3-24g4xg: Remove marvell, nand-keep-config   Chris Packham
• [PATCH v2 3/3] arm: mvebu: Add Allied Telesis x220   Chris Packham
• [PATCH v2 3/3] arm: mvebu: Add Allied Telesis x220   Chris Packham
• [PATCH v3 0/3] arm: mvebu: Updates for xcat3   Chris Packham
• [PATCH v3 1/3] mtd: nand: pxa3xx: Pass valid dev to dev_err()   Chris Packham
• [PATCH v3 2/3] arm: mvebu: db-xc3-24g4xg: Remove marvell, nand-keep-config   Chris Packham
• [PATCH v3 3/3] arm: mvebu: Add Allied Telesis x220   Chris Packham
• [PATCH] configs: am43xx: Migrate to CONFIG_SYS_MEM_TOP_HIDE from CFG_PRAM   Beleswar Padhi
• [PATCH v3] configs: am57xx_hs_evm_defconfig: Reserve EMIF memory used by PPA   Beleswar Padhi
• [PATCH v3 00/11] Add support to boot TI K3 HSM M4 core   Beleswar Padhi
• [PATCH v3 01/11] spl: Use FIT data address as fallback when 'load' property is absent   Beleswar Padhi
• [PATCH v3 02/11] arm: mach-k3: Use FIT image data addr as fallback if 'load' prop is missing   Beleswar Padhi
• [PATCH v3 03/11] arm: mach-k3: Explicitly identify TIFSSTUB images when discarding buffers   Beleswar Padhi
• [PATCH v3 04/11] arm: mach-k3: Add config option for packaging HSM firmware   Beleswar Padhi
• [PATCH v3 05/11] arm: dts: k3-binman: Add template for packing HSM firmware   Beleswar Padhi
• [PATCH v3 06/11] arm: dts: k3-{j721s2/j722s/j784s4}-binman: Pack HSM firmware inside tispl.bin   Beleswar Padhi
• [PATCH v3 07/11] binman: openssl: Add boot and load extensions to x509 cert   Beleswar Padhi
• [PATCH v3 08/11] arm: dts: k3-{j721s2/j722s/j784s4}-r5.dtsi: Enable HSM core   Beleswar Padhi
• [PATCH v3 09/11] remoteproc: k3-hsm: Introduce a remoteproc driver for K3 HSM core   Beleswar Padhi
• [PATCH v3 10/11] arm: mach-k3: r5: common: Invoke boot of HSM M4 core   Beleswar Padhi
• [PATCH v3 11/11] configs: j722s_evm_r5_hsmboot: Add new defconfig to show HSM boot   Beleswar Padhi
• [PATCH v2] configs: am571x_hs_evm_defconfig: Reserve EMIF memory used by PPA   Beleswar Prasad Padhi
• [PATCH v2] configs: am571x_hs_evm_defconfig: Reserve EMIF memory used by PPA   Beleswar Prasad Padhi
• [PATCH v2] configs: am571x_hs_evm_defconfig: Reserve EMIF memory used by PPA   Beleswar Prasad Padhi
• [PATCH v2] configs: am571x_hs_evm_defconfig: Reserve EMIF memory used by PPA   Beleswar Prasad Padhi
• [PATCH v2] configs: am571x_hs_evm_defconfig: Reserve EMIF memory used by PPA   Beleswar Prasad Padhi
• [PATCH v2] configs: am571x_hs_evm_defconfig: Reserve EMIF memory used by PPA   Beleswar Prasad Padhi
• [PATCH] lib: elf: Fix typo   Daniel Palmer
• [PATCH] lib: elf: Fix typo   Daniel Palmer
• [PATCH 0/3] m68k: Add support for QEMU virt machine   Daniel Palmer
• [PATCH 3/3] board: Add QEMU m68k virt board support   Daniel Palmer
• [PATCH 2/3] m68k: Add support for M68040 CPU   Daniel Palmer
• [PATCH 0/3] m68k: Add support for QEMU virt machine   Daniel Palmer
• [PATCH] mmc: mmc_spi: Select CRC16 if CRC checking is enabled   Daniel Palmer
• [PATCH v2 3/4] board: Add QEMU m68k virt board support   Daniel Palmer
• [PATCH v2 2/4] m68k: Add support for M68040 CPU   Daniel Palmer
• [PATCH v2 3/4] board: Add QEMU m68k virt board support   Daniel Palmer
• [PATCH v2 2/4] m68k: Add support for M68040 CPU   Daniel Palmer
• [PATCH v2 3/4] board: Add QEMU m68k virt board support   Daniel Palmer
• [PATCH v3 2/6] timer: Add Goldfish timer driver   Daniel Palmer
• [PATCH v3 1/6] serial: Add Goldfish TTY driver   Daniel Palmer
• [PATCH v3 5/6] board: Add QEMU m68k virt board support   Daniel Palmer
• [PATCH 1/1] binman: fallback to importlib_resources on Python 3.8   Chukun Pan
• [PATCH 0/6] Add support for fwumdata   Patryk
• Standard Boot integration - script validation before execution   Patryk
• Standard Boot integration - script validation before execution   Patryk
• [PATCH] Add missing “net” prefix in help net   Emmanuel Gil Peyrot
• [PATCH 1/3] mmc: msm_sdhci: Fix incorrect divider calculation for SDCLK   Loic Poulain
• [PATCH 2/3] clk/qcom: qcm2290: Add SDCC1 apps clock frequency table   Loic Poulain
• [PATCH 3/3] mmc: msm_sdhci: Add DLL control hook to disable DLL below 100 MHz   Loic Poulain
• [PATCH] fs/zfs/zfs.c: prevent integer overflow in zfs_nvlist_lookup_nvlist   Timo tp Preißl
• [PATCH 0/4] fix integer overflows in filesystem code   Timo tp Preißl
• [PATCH 1/4] fs: prevent integer overflow in fs.c do_mv()   Timo tp Preißl
• [PATCH 2/4] fs: zfs: prevent integer overflow in zfs_nvlist_lookup_nvlist()   Timo tp Preißl
• [PATCH 3/4] fs: squashfs: prevent integer overflow in sqfs_concat_tokens()   Timo tp Preißl
• [PATCH 4/4] fs: ext4: preventing integer overflow in ext4fs_get_bgdtable()   Timo tp Preißl
• [PATCH 0/4] fix multiple integer overflows in fs   Timo tp Preißl
• [PATCH 1/4] fs: prevent integer overflow in fs.c do_mv   Timo tp Preißl
• [PATCH 2/4] fs: prevent integer overflow in zfs_nvlist_lookup   Timo tp Preißl
• [PATCH 3/4] fs: prevent integer overflow in sqfs_concat   Timo tp Preißl
• [PATCH 4/4] fs: prevent integer overflow in ext4fs_get_bgdtable   Timo tp Preißl
• [PATCH v2 0/4] fix integer overflows in filesystem code   Timo tp Preißl
• [PATCH v2 1/4] fs: prevent integer overflow in fs.c do_mv   Timo tp Preißl
• [PATCH v2 2/4] fs: prevent integer overflow in zfs_nvlist_lookup   Timo tp Preißl
• [PATCH v2 3/4] fs: prevent integer overflow in sqfs_concat   Timo tp Preißl
• [PATCH v2 4/4] fs: prevent integer overflow in ext4fs_get_bgdtable   Timo tp Preißl
• [PATCH next] board: amediatech: Add X96Q support   J. Neuschäfer via B4 Relay
• [PATCH] Update links to doc/develop/falcon.rst   J. Neuschäfer via B4 Relay
• [PATCH v2 0/5] clk: support arbitrary clk_register() sequence   Yang Xiwen via B4 Relay
• [PATCH v2 1/5] drivers: core: device: set new parent when old parent is NULL   Yang Xiwen via B4 Relay
• [PATCH v2 2/5] clk: add uclass id check to clk_get_parent()   Yang Xiwen via B4 Relay
• [PATCH v2 3/5] clk: use clk_get_parent() helper in clk_en(dis)able()   Yang Xiwen via B4 Relay
• [PATCH v2 4/5] clk: allow assigning parent lazily   Yang Xiwen via B4 Relay
• [PATCH v2 5/5] test: clk: add test for CLK_LAZY_REPARENT   Yang Xiwen via B4 Relay
• [PATCH v2 06/10] gpio: a733: add initial support   Tom Rini
• [PATCH] CI: Update to latest container images   Tom Rini
• [PATCH 2/2] imx: Support i.MX91 11x11 FRDM board   Tom Rini
• [PATCH v1 1/2] imx8ulp_evk: Move environment variables to .env file   Tom Rini
• [PATCH v2 1/4] Gitlab: Add a "sage-lab" stage to access a board farm   Tom Rini
• [PATCH for next] Docker: Update QEMU to 10.1.x   Tom Rini
• [PATCH] Dockerfile: Switch to distro-provided trace-cmd   Tom Rini
• [PATCH] CI: add libengine-pkcs11-openssl package for pkcs11   Tom Rini
• [PATCH next v2 0/3] CI: use mirrors for GNU tools   Tom Rini
• [PATCH] CI: Update to latest container images   Tom Rini
• [PATCH v2 7/7] configs: am335x_evm_defconfig: Switch to upstream devicetree   Tom Rini
• [PATCH v1 2/8] arm: Fix "file truncated" linker errors from empty built-in.a in SPL/TPL/VPL builds   Tom Rini
• [PATCH v2] Fix socfpga GEN5 boot by spl+u-boot sfp on RAW   Tom Rini
• [PATCH v1 2/8] arm: Fix "file truncated" linker errors from empty built-in.a in SPL/TPL/VPL builds   Tom Rini
• [PATCH] fs/erofs: Fix realloc error handling   Tom Rini
• [PATCH v2] Fix socfpga GEN5 boot by spl+u-boot sfp on RAW   Tom Rini
• [PATCH v1 2/8] arm: Fix "file truncated" linker errors from empty built-in.a in SPL/TPL/VPL builds   Tom Rini
• [PATCH] boot/image-fit.c: Restore building tools on macOS   Tom Rini
• [PATCH v2] Fix socfpga GEN5 boot by spl+u-boot sfp on RAW   Tom Rini
• [PATCH v2 1/5] spl: Kconfig: Add missing SPL_LOAD_BLOCK for SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE   Tom Rini
• [PATCH v2 2/5] spl: mmc: Account for SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE being a choice   Tom Rini
• [PATCH v2 3/5] spl: mmc: Respect sector value passed to mmc_load_image_raw_partition   Tom Rini
• [PATCHv2 1/1] corstone1000: Add Cortex-A320 support on FVP   Tom Rini
• [PATCH v1 2/8] arm: Fix "file truncated" linker errors from empty built-in.a in SPL/TPL/VPL builds   Tom Rini
• [PATCH v5 0/3] Harmonize image size checks   Tom Rini
• [PATCH v1 2/8] arm: Fix "file truncated" linker errors from empty built-in.a in SPL/TPL/VPL builds   Tom Rini
• [PATCH] fs/erofs: Fix realloc error handling   Tom Rini
• [PATCH v2 2/5] spl: mmc: Account for SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE being a choice   Tom Rini
• [for-master PATCH] Azure: Rework jobs for disk space and 29 jobs   Tom Rini
• Please pull net-20251201   Tom Rini
• Pull request: SoCFPGA changes for u-boot-socfpga-next-20251201   Tom Rini
• [PATCH] boot/image-fit.c: Restore building tools on macOS   Tom Rini
• [PATCH v1 1/2] imx8ulp_evk: Move environment variables to .env file   Tom Rini
• [PATCH v2] test: correct strlcat license information   Tom Rini
• [PATCHv2] boot/image-fit.c: Resort to using malloc for USE_HOSTCC   Tom Rini
• [PATCH 0/3] Synchronize DTC to 1.7.2   Tom Rini
• Dropping macOS and Windows host tool builds and support in U-Boot   Tom Rini
• Dropping macOS and Windows host tool builds and support in U-Boot   Tom Rini
• [PULL] u-boot-at91-fixes-2026.01-a   Tom Rini
• please pull u-boot-samsung master   Tom Rini
• Dropping macOS and Windows host tool builds and support in U-Boot   Tom Rini
• Dropping macOS and Windows host tool builds and support in U-Boot   Tom Rini
• Dropping macOS and Windows host tool builds and support in U-Boot   Tom Rini
• [PATCH v3 4/4] tools: binman: fit: add tests for signing with an OpenSSL engine   Tom Rini
• Please pull net-next-20251201   Tom Rini
• [GIT PULL] Please pull u-boot-ufs-20251202   Tom Rini
• [PATCHv3] boot/image-fit.c: Use aligned_alloc(...) not memalign(...)   Tom Rini
• Dropping macOS and Windows host tool builds and support in U-Boot   Tom Rini
• [PULL] u-boot-sh/master   Tom Rini
• [PATCH v6] boot/bootfdt: Add smbios3-entrypoint to FDT for non-EFI boots   Tom Rini
• [PATCH RFC 0/4] fit: print conf node compatibles + use property string constants   Tom Rini
• [PULL] u-boot-sh/master   Tom Rini
• [PATCH 0/6] Add support for fwumdata   Tom Rini
• [PATCH] pinctrl: single: Add missing free in single_allocate_function   Tom Rini
• [PATCH] pinctrl: single: Add missing free in single_allocate_function   Tom Rini
• [PATCH 0/6] Add support for fwumdata   Tom Rini
• [PATCH 00/11] led: remove u-boot,boot-led and u-boot,error-led + add cmd doc   Tom Rini
• [PATCH 0/6] Add support for fwumdata   Tom Rini
• [PATCH v3 4/4] tools: binman: fit: add tests for signing with an OpenSSL engine   Tom Rini
• [PATCH v3 4/9] configs: am335x_evm: Unify evm board defconfigs   Tom Rini
• [PATCH] doc: board: ti: Add J742S2 support   Tom Rini
• [PATCH] doc: board: ti: Add J742S2 support   Tom Rini
• [PATCH] pinctrl: single: Add missing free in single_allocate_function   Tom Rini
• [PATCH] pinctrl: single: Add missing free in single_allocate_function   Tom Rini
• [PATCH] nitrogen6x: change maintainer   Tom Rini
• [GIT PULL] Please pull u-boot-dfu-next-20251203 into next   Tom Rini
• [PATCH 0/6] clk: Fix some error detection   Tom Rini
• [PATCH v3 0/6] Add support for SM3 secure hash   Tom Rini
• [PATCH v1] clk: Only enable the parent clock if the clock was enabled before reparenting   Tom Rini
• [PATCH] Change email addresses for B&R Industrial Automation   Tom Rini
• [PATCH v2] board: BuR: Update MAINTAINERS files   Tom Rini
• [PATCH 1/1] binman: fallback to importlib_resources on Python 3.8   Tom Rini
• [PATCH] test: strlcat: Fix SPDX license   Tom Rini
• [PATCH] clk: Remove myself as a maintainer   Tom Rini
• [PATCH v1] board: toradex: add aquila am69 support   Tom Rini
• [PATCH v1] board: toradex: add aquila am69 support   Tom Rini
• [PATCH] vexpress_aemv8: Stop disabling device tree relocation   Tom Rini
• [PATCHv3] boot/image-fit.c: Use aligned_alloc(...) not memalign(...)   Tom Rini
• [PATCH] adi: Stop disabling device tree relocation   Tom Rini
• [PATCH] arm: Remove remainder of zc5xxx board code   Tom Rini
• [PATCH] arm: Remove remainder of xpress board code   Tom Rini
• [PATCH] qemu-arm-sba: Stop disabling device tree relocation   Tom Rini
• [PATCH] am335x_shc: Stop disabling device tree relocation   Tom Rini
• [PATCH] bcmstb: Make use of bootm_size rather than fdt_high   Tom Rini
• [PATCH] hikey: Stop disabling device tree relocation   Tom Rini
• [PATCH] hikey960: Stop disabling device tree relocation   Tom Rini
• [PATCH] omap3_evm: Stop disabling device tree relocation   Tom Rini
• [PATCH] pcm052: Stop disabling device tree relocation   Tom Rini
• [PATCH v3 0/6] Add support for SM3 secure hash   Tom Rini
• [PULL] Pull request for u-boot next / v2026.04 = u-boot-stm32-20251205   Tom Rini
• [PATCH 00/19] test: let UNIT_TEST imply CONSOLE_RECORD   Tom Rini
• [PATCH v2] nitrogen6x: change maintainer   Tom Rini
• [PATCH 1/5] led: remove code guarded by always false conditions   Tom Rini
• [PATCH 1/4] corvus: remove green led support   Tom Rini
• [PATCH] mtd: Tighten some driver dependencies   Tom Rini
• [PATCH v2] clk: ti: Tighten some TI clock driver dependencies   Tom Rini
• [PATCH v2] firmware: ti_sci: Fix memory leaks in devm_ti_sci_get_of_resource   Tom Rini
• [PATCH] fs/erofs: Fix realloc error handling   Tom Rini
• [PATCH] examples: Fix checking id parameter in thread_start   Tom Rini
• [PATCH] autoboot: Fix inconsistent countdown output   Tom Rini
• [PATCH] board: ti: CAT24C256WI-GT3 require min. 5ms delay (tWR) between write/read   Tom Rini
• [PATCH next] configs: am64x, am65x: add CONFIG_DA8XX_GPIO   Tom Rini
• [PATCH] boot: Check noffset before use   Tom Rini
• [PATCH] reboot-mode: Correct macro name from U_BOOT_DEVICE to U_BOOT_DRVINFO   Tom Rini
• [PATCH v2 0/3] clk: Return value calculated by ERR_PTR   Tom Rini
• Pull request efi-2026-01-rc4 for master branch   Tom Rini
• [PATCH v2] MAINTAINERS: update my email address   Tom Rini
• [PATCH v1] update GCC version check after Kbuild bump   Tom Rini
• [PATCH v3] arm: mach-k3: j722s: Fix eMMC boot functionality broken by Ethernet boot   Tom Rini
• [PATCH] doc: Update urllib3 version for building   Tom Rini
• [PATCH] bus: ti-sysc: select CLK_TI_CTRL driver   Tom Rini
• [PATCH] doc: Update urllib3 version for building   Tom Rini
• [PATCH v3 0/4] fit: allow signing with an OpenSSL engine   Tom Rini
• [PATCH v3 1/2] test/py: fit: Deduplicate the test   Tom Rini
• [PATCH] omap3_evm: Take over maintainership   Tom Rini
• [GIT PULL] Please pull u-boot-imx-next-20251206   Tom Rini
• [PATCH v2 1/2] board: phytec: phytec_som_detection: Add missing assignment   Tom Rini
• [for-next PATCH 1/2] Azure: Rework world build to directly use the container   Tom Rini
• [PATCH v2] configs: am571x_hs_evm_defconfig: Reserve EMIF memory used by PPA   Tom Rini
• [PATCH v2 0/3] clk: Return value calculated by ERR_PTR   Tom Rini
• [PATCH] configs: phycore_am64x_a53_defconfig: Drop eMMC HS400 mode   Tom Rini
• [PATCH] doc: Update urllib3 version for building   Tom Rini
• [PATCH] omap3_evm: Take over maintainership   Tom Rini
• [PATCH] arm64: versal: Fix LTO for mini_ospi/mini_qspi   Tom Rini
• [PATCH] MAINTAINERS: update my email address   Tom Rini
• [ANN] U-Boot v2026.01-rc4 released   Tom Rini
• [ANN] U-Boot v2026.01-rc4 released   Tom Rini
• Fwd: New Defects reported by Coverity Scan for Das U-Boot   Tom Rini
• [PATCH] Makefile: use --output-target instead of --target   Tom Rini
• [PATCH] spi: designware: Allow disabling designware driver in SPL   Tom Rini
• [GIT PULL] u-boot-riscv/next   Tom Rini
• [PATCH] mtd: spi: Add missing free in sf_get_bootflow   Tom Rini
• New Defects reported by Coverity Scan for Das U-Boot   Tom Rini
• [PATCH] arm64: versal2: Populate DRAM banks before page table size calculation   Tom Rini
• [PATCH] arm64: versal2: Populate DRAM banks before page table size calculation   Tom Rini
• [PATCH] configs: am43xx: Migrate to CONFIG_SYS_MEM_TOP_HIDE from CFG_PRAM   Tom Rini
• [PATCH] fs: fat: Perform sanity checks on getsize in get_fatent()   Tom Rini
• [PATCH 1/1] tools: use setuptools 78.1.1   Tom Rini
• [U-BOOT TESTHOOKS][PATCH 1/1] py/travis-ci: add u_boot_boardenv_qemu_riscv64_smode_(acpi_)na.py   Tom Rini
• [PATCH v2] scripts/dtc: Update to upstream version v1.7.2-35-g52f07dcca47c   Tom Rini
• [PATCH v3 4/4] tools: binman: fit: add tests for signing with an OpenSSL engine   Tom Rini
• [U-BOOT TESTHOOKS][PATCH 1/1] py/travis-ci: add u_boot_boardenv_qemu_riscv64_smode_(acpi_)na.py   Tom Rini
• [PATCH 0/6] board: ti: Add 32k crystal initialization   Tom Rini
• [PULL] Pull request for u-boot master / v2026.01 = u-boot-stm32-20251209   Tom Rini
• [PATCH] Makefile: use --output-target instead of --target   Tom Rini
• [PATCH] configs: am43xx: Migrate to CONFIG_SYS_MEM_TOP_HIDE from CFG_PRAM   Tom Rini
• [PATCH] test: dm: fdtdec: Validate FDT size in unit test   Tom Rini
• [PATCH 1/1] tools: use setuptools 78.1.1   Tom Rini
• [PATCH 2/2] clk: mediatek: add MT8188 clock driver   Tom Rini
• [PATCH] test: dm: fdtdec: Validate FDT size in unit test   Tom Rini
• [PATCH] fs/jffs2: Make depend on !64BIT   Tom Rini
• [PATCH] configs: am335x_hs_evm_spi_defconfig: Remove duplicate symbols   Tom Rini
• [PATCH 1/2] arch: arm: dts: k3-am625-phyboard-lyra: Drop bootph properties   Tom Rini
• [PATCH v2] binman: blob_dtb: improve error message when SPL is not found   Tom Rini
• [PATCH 2/2] clk: mediatek: add MT8188 clock driver   Tom Rini
• [PATCH 0/3] Fix compilation issue on regulator_common file   Tom Rini
• [PATCH RESEND] arm: dts: mediatek: switch mt8365 to OF_UPSTREAM   Tom Rini
• [PATCH v2 0/3] clk: Return value calculated by ERR_PTR   Tom Rini
• [PATCH] power: regulator: Fix dependency of SPL_DM_REGULATOR_GPIO   Tom Rini
• [PATCH v2 0/3] clk: Return value calculated by ERR_PTR   Tom Rini
• [GIT PULL] Please pull u-boot-dfu-next-20251211 into next   Tom Rini
• [GIT PULL] Please pull fsl-qoriq-next-2025-12-11 for next   Tom Rini
• [GIT PULL] Please pull mmc-next-2025-12-11 for next   Tom Rini
• [PATCH] Revert "clk: Return value calculated by ERR_PTR"   Tom Rini
• [PATCH 0/5] net: Port NFS to LWIP   Tom Rini
• [PATCH v2 3/6] net: nfs: Add licence header   Tom Rini
• [PATCH] Revert "clk: Return value calculated by ERR_PTR"   Tom Rini
• [PATCH] Revert "drivers: scsi: fix inaccurate block count reporting in scsi operations"   Tom Rini
• Pull request efi-2026-01-rc5   Tom Rini
• [PATCH] fs: fat: Perform sanity checks on getsize in get_fatent()   Tom Rini
• [PATCH v2] configs: am571x_hs_evm_defconfig: Reserve EMIF memory used by PPA   Tom Rini
• [PATCH] simple-pm-bus: Make clocks optional   Tom Rini
• [PATCH] power: domain: Add ti-omap-prm stub   Tom Rini
• [PATCH v2 0/2] clk: ti: Cleanup common functions and omap-cm   Tom Rini
• Pull request: u-boot-rockchip-20251214   Tom Rini
• [PATCH next v3] Kconfig: select SPL_USE_TINY_PRINTF_POINTER_SUPPORT for K3   Tom Rini
• [PATCH v1 4/7] usb: ci_udc: Convert driver to DM_USB_GADGET   Tom Rini
• [PATCH v2] configs: am571x_hs_evm_defconfig: Reserve EMIF memory used by PPA   Tom Rini
• Standard Boot integration - script validation before execution   Tom Rini
• [PATCH] Revert "drivers: scsi: fix inaccurate block count reporting in scsi operations"   Tom Rini
• [PATCH v2] tools/libfdt/fdt_rw: fix SPDX-License-Identifier   Tom Rini
• [PATCH] clk: mediatek: remove duplicate '@parent' field doc   Tom Rini
• [PATCH] cmd: part: Fix part argument description for `part number`   Tom Rini
• [PATCH] arm: dts: k3-am62d-evm-binman: Update DM   Tom Rini
• [PATCH] pinctrl: single: Add missing free in single_allocate_function   Tom Rini
• [PATCH next v2] ti: k3: abstract common fdt api for reserved mem fixups   Tom Rini
• [PATCH next v2 0/4] fit: print conf node compatibles + use property string constants   Tom Rini
• [PATCH v2] board: toradex: add aquila am69 support   Tom Rini
• [PATCH] board: BuS: remove support for BOOT LED   Tom Rini
• [PATCH] test/py, buildman: Update filelock package version   Tom Rini
• [PATCH] cmd: bdinfo: fix incorrect Kconfig options check for print_eth()   Tom Rini
• [PATCH] cmd: bdinfo: fix incorrect Kconfig options check for print_eth()   Tom Rini
• [PATCH] cmd: bdinfo: fix incorrect Kconfig options check for print_eth()   Tom Rini
• [GIT PULL] please pull scmi-master-2025-12-17   Tom Rini
• [PATCH 3/3] env: Add single to redundant environment upgrade path   Tom Rini
• [PATCH 3/3] env: Add single to redundant environment upgrade path   Tom Rini
• [PATCH next v3] Kconfig: select SPL_USE_TINY_PRINTF_POINTER_SUPPORT for K3   Tom Rini
• [PATCH next v3] Kconfig: select SPL_USE_TINY_PRINTF_POINTER_SUPPORT for K3   Tom Rini
• Pull request: SoCFPGA changes for u-boot-socfpga-next-20251217   Tom Rini
• [PATCH 2/3] m68k: Add support for M68040 CPU   Tom Rini
• [PATCH 0/3] m68k: Add support for QEMU virt machine   Tom Rini
• [PATCH 3/3] board: Add QEMU m68k virt board support   Tom Rini
• [PATCH v2 3/3] arm: mvebu: Add Allied Telesis x220   Tom Rini
• Please pull net-20251218   Tom Rini
• [PATCH master] doc: board: ti: fix alt name for tispl.bin in DFU mode   Tom Rini
• [PATCH] cmd: nvedit: Validate argument count before use   Tom Rini
• [PATCH] doc: pytest: fix typo in multiple config options example for buildconfigspec   Tom Rini
• [PATCH] test/py, buildman: Update filelock package version   Tom Rini
• [RFC PATCH 0/9] Update lzma to current version of LZMA SDK   Tom Rini
• [RFC PATCH 1/9] lzma: Add Kconfig options to optimize for size   Tom Rini
• [RFC PATCH 2/9] lzma: Remove extra files and explain where our library comes from   Tom Rini
• [RFC PATCH 3/9] lzma: Update 9.20 -> 9.22   Tom Rini
• [RFC PATCH 4/9] lzma: Update 9.22 -> 9.38   Tom Rini
• [RFC PATCH 5/9] lzma: Update 9.38 -> 18.06   Tom Rini
• [RFC PATCH 6/9] lzma: Update 18.06 -> 21.07   Tom Rini
• [RFC PATCH 7/9] lzma: Update 21.07 -> 25.01   Tom Rini
• [RFC PATCH 8/9] lzma: Restore spacing fixes   Tom Rini
• [RFC PATCH 9/9] lzma: Add SPDX-License-Identifier lines   Tom Rini
• [PATCH 3/3] env: Add single to redundant environment upgrade path   Tom Rini
• [PATCHv1 0/3] lzma: Update to 25.01 release of LZMA SDK   Tom Rini
• [PATCHv1 1/3] lzma: Add Kconfig options to optimize for size   Tom Rini
• [PATCHv1 2/3] lzma: Update LZMA SDK code from 9.20 to 25.01   Tom Rini
• [PATCHv1 3/3] lzma: Add SPDX-License-Identifier lines   Tom Rini
• [RFC PATCH 0/9] Update lzma to current version of LZMA SDK   Tom Rini
• [PATCH] Revert "drivers: scsi: fix inaccurate block count reporting in scsi operations"   Tom Rini
• [GIT PULL] Please pull u-boot-amlogic-next-20251219   Tom Rini
• [GIT PULL] AMD/Xilinx changes for 2026.04-rc1   Tom Rini
• [PATCH 0/3] Enable / require DEVRES for devm_.alloc usage outside xPL   Tom Rini
• [PATCH 1/3] mips: Reduce size in gardena-smart-gateway-mt7688   Tom Rini
• [PATCH 2/3] x86: Increase SYS_MALLOC_F_LEN to 0x1000   Tom Rini
• [PATCH 3/3] dm: core: Default to using DEVRES outside of xPL   Tom Rini
• Updating U-Boot next branch to v6.18-dts   Tom Rini
• [PATCH 1/1] lmb: always enforce CONFIG_LMB   Tom Rini
• [PATCH v1] fix PL330 CMD supported target   Tom Rini
• [PATCH v1] fix PL330 CMD supported target   Tom Rini
• [PATCH 2/3] m68k: Add support for M68040 CPU   Tom Rini
• [PATCH] checkpatch: Add check for space indentation in Kconfig   Tom Rini
• [PATCH v1] Replace TARGET namespace and cleanup properly   Tom Rini
• [PATCH v1] fix PL330 CMD supported target   Tom Rini
• [PATCH v2] drivers: scsi: fix double decrement of block count in 64-bit LBA path   Tom Rini
• [ANN] U-Boot v2026.01-rc5 released   Tom Rini
• [PULL] u-boot-sh/master   Tom Rini
• Please pull u-boot-tegra staging   Tom Rini
• [PATCH v2 2/3] env: Add single to redundant environment upgrade path   Tom Rini
• [PATCH v2 3/3] configs: sandbox: Enable environment in SPI NOR support   Tom Rini
• [PATCH v2 1/3] test: env: Add test for environment storage in SPI NOR   Tom Rini
• [GIT PULL] please pull mmc-power-next-2025-12-24   Tom Rini
• 回复: [PATCH v1 5/7] usb: Kconfig: imply DM_USB_GADGET   Tom Rini
• [PATCH] net: tftpput: Rework to exclude code from xPL phases   Tom Rini
• [PATCH] Gitlab CI: Add BeagleBone Black to sage lab   Tom Rini
• [u-boot-test-hooks][PATCH] labgrid: sage: Add BeagleBone Black   Tom Rini
• Pull request efi-next-20251225 (for next branch)   Tom Rini
• (subset) [PATCH 0/3] Enable / require DEVRES for devm_.alloc usage outside xPL   Tom Rini
• [PATCH 3/3] dm: core: Default to using DEVRES outside of xPL   Tom Rini
• [PATCH v1 0/2] pinctrl: qcom: Make pinctrl drivers default y   Tom Rini
• [PATCH v2 1/4] spi: nxp_xspi: Add new driver for NXP XSPI controller   Tom Rini
• [PATCH 3/3] dm: core: Default to using DEVRES outside of xPL   Tom Rini
• [PATCH v2 4/4] CI: Add test jobs for QEMU m68k virt machine   Tom Rini
• [PATCH 3/3] dm: core: Default to using DEVRES outside of xPL   Tom Rini
• [PATCH v2 4/4] CI: Add test jobs for QEMU m68k virt machine   Tom Rini
• [PATCH 3/3] dm: core: Default to using DEVRES outside of xPL   Tom Rini
• [PATCH] dm: core: Create ofnode stubs when OF_REAL is disabled   Tom Rini
• [PATCH] dm: core: Create ofnode stubs when OF_REAL is disabled   Tom Rini
• [PATCH] Fix typo "addtional" -> "additional" in pflash section.   Tom Rini
• [PATCH v2] clk: fixed_rate: Avoid calling dev_read_*() if CONFIG_OF_PLATDATA=y   Tom Rini
• [PATCH v2] gpio: sandbox: Avoid calling dev_read_*() if CONFIG_OF_PLATDATA=y   Tom Rini
• [PATCH v2] boot: Warn users about fdt_high=~0 usage   Tom Rini
• [PATCH v3 1/2] i2c: Inline i2c_chip_of_to_plat() into i2c_child_post_bind()   Tom Rini
• [PATCH] dm: core: Create ofnode stubs when OF_REAL is disabled   Tom Rini
• [PATCH v2 0/2] Enable / require DEVRES for devm_.alloc usage outside xPL   Tom Rini
• [PATCH v2 1/2] x86: Increase SYS_MALLOC_F_LEN to 0x1000   Tom Rini
• [PATCH v2 2/2] dm: core: Default to using DEVRES outside of xPL   Tom Rini
• [PATCH v1 1/3] Add CoreCourse socfpga Board   Tom Rini
• [PATCH v1 3/3] Add CoreCourse socfpga Board   Tom Rini
• [PATCH 0/4] fix integer overflows in filesystem code   Tom Rini
• [ANN] U-Boot joins Software Freedom Conservancy   Tom Rini
• [GIT PULL] Please pull u-boot-imx-next-20251229   Tom Rini
• [PULL] u-boot-sh/master   Tom Rini
• [PATCH 1/1] board: mt5824: Add initial support for Metanoia MT5824 EVB   Tom Rini
• [PATCH v3 0/9] arm: am335x: Switch to upstream devicetree   Tom Rini
• [PATCH v3 6/6] CI: Add test jobs for QEMU m68k virt machine   Tom Rini
• [u-boot-test-hooks][PATCH v2] travis-ci: Add config for QEMU m68k virt machine   Tom Rini
• [PATCH] spi: Correct dependencies on AIROHA_SNFI_SPI   Tom Rini
• [PATCH v3 3/4] video: simple_panel: Add tfc_s9700rtwv43tr_01b   Tom Rini
• [PATCH v4 2/2] configs: am62x_evm_a53_defconfig: Enable A53 splashscreen at u-boot SPL   Tom Rini
• [PATCH 0/2] video: display: refactor display_read_timing to avoid code duplication   Tom Rini
• [PATCH] video: simplefb: Add stride handling   Tom Rini
• [PATCHv2 0/7] video: Remove unused drivers, clean up dependencies   Tom Rini
• [PATCH] common/splash_source.c: Change bmp_load_addr to ulong from u32   Tom Rini
• (subset) [PATCH v4 0/2] Refactor tidss_drv and enable early splash on AM625   Tom Rini
• [PATCH 0/4] fix integer overflows in filesystem code   Tom Rini
• [PATCH 1/1] board: mt5824: Add initial support for Metanoia MT5824 EVB   Tom Rini
• [EXT] Re: [PATCH] mmc: Add power stabilization delay in mmc_power_on()   Tom Rini
• [PATCH 1/1] video: menu "TrueType Fonts" depends on TrueType enabled   Tom Rini
• [PATCH 1/1] video: correct label for cyclic video_idle   Tom Rini
• [PATCH v2 1/3] test: env: Add test for environment storage in SPI NOR   Tom Rini
• [u-boot-test-hooks][PATCH v2] travis-ci: Add config for QEMU m68k virt machine   Tom Rini
• [PATCH] CI: Add "allyesconfig" to one of the build jobs   Tom Rini
• [PATCH v2 1/3] test: env: Add test for environment storage in SPI NOR   Tom Rini
• [PATCH 1/4] configs: Remove default malloc length for K3 R5 SPL   Tom Rini
• [PATCH RESEND] arm: dts: mediatek: switch mt8365 to OF_UPSTREAM   Tom Rini
• [PATCH v1 0/6] modify npcm7xx/8xx feature and bug fixed   Tom Rini
• [PATCH] rockchip: rk3568-nanopi-r5: Drop duplicated/extra sdhci   Peter Robinson
• [PATCH] rockchip: rk356x: Stop overriding sdhci/mmc aliases   Peter Robinson
• [PATCH] rockchip: rk356x: Stop overriding sdhci/mmc aliases   Peter Robinson
• Dropping macOS and Windows host tool builds and support in U-Boot   Peter Robinson
• [RFC PATCH 0/9] Update lzma to current version of LZMA SDK   Peter Robinson
• [PATCH] arm: kirkwood: Remove unnecessary watchdog GPIO for ZyXEL NSA325 board   Stefan Roese
• [PATCH 1/3] mips: Reduce size in gardena-smart-gateway-mt7688   Stefan Roese
• [PATCHv1 1/3] lzma: Add Kconfig options to optimize for size   Stefan Roese
• [PATCH] watchdog: orion_wdt: Add support for armada-xp   Stefan Roese
• [PATCH v3 1/3] mtd: nand: pxa3xx: Pass valid dev to dev_err()   Stefan Roese
• [PATCH v3 2/3] arm: mvebu: db-xc3-24g4xg: Remove marvell,nand-keep-config   Stefan Roese
• [PATCH v3 3/3] arm: mvebu: Add Allied Telesis x220   Stefan Roese
• [PATCH v2] imx9: scmi: soc: USB instance number change for silicon revision B0   Fedor Ross
• [PATCH] x86: cpu: Fix crash on FTRACE enabled builds   Patrick Rudolph
• [PATCH v2] x86: cpu: Fix crash on FTRACE enabled builds   Patrick Rudolph
• [PATCH 1/2] timer: tsc_timer: Fix FTRACE support   Patrick Rudolph
• [PATCH 2/2] efi_loader: Fix kernel panic when FTRACE is enabled   Patrick Rudolph
• [PATCH 2/2] efi_loader: Fix kernel panic when FTRACE is enabled   Patrick Rudolph
• [PATCH v1 0/7] Refactor i.MX IPU driver   Brian Ruley
• [PATCH v1 1/7] video: imx: ipuv3: remove undefined function declarations   Brian Ruley
• [PATCH v1 2/7] video: imx: ipuv3: apply clang-format   Brian Ruley
• [PATCH v1 3/7] video: imx: ipuv3: prefer kernel types   Brian Ruley
• [PATCH v1 4/7] video: imx: ipuv3: fix camel cases   Brian Ruley
• [PATCH v1 5/7] video: imx: ipuv3: add names to clk function identifiers   Brian Ruley
• [PATCH v1 6/7] video: imx: ipuv3: use CONFIG_IS_ENABLED   Brian Ruley
• [PATCH v1 7/7] video: imx: ipuv3: refactor to use dm-managed state   Brian Ruley
• [PATCH v2 0/7] Refactor i.MX IPU driver   Brian Ruley
• [PATCH v2 1/7] video: imx: ipuv3: remove undefined function declarations   Brian Ruley
• [PATCH v2 2/7] video: imx: ipuv3: apply clang-format   Brian Ruley
• [PATCH v2 3/7] video: imx: ipuv3: prefer kernel types   Brian Ruley
• [PATCH v2 4/7] video: imx: ipuv3: fix camel cases   Brian Ruley
• [PATCH v2 5/7] video: imx: ipuv3: add names to clk function identifiers   Brian Ruley
• [PATCH v2 6/7] video: imx: ipuv3: use CONFIG_IS_ENABLED   Brian Ruley
• [PATCH v2 7/7] video: imx: ipuv3: refactor to use dm-managed state   Brian Ruley
• Please pull u-boot-tegra staging   Svyatoslav Ryhel
• [PATCH v4 00/10] arm: k3: j784s4: Add PCIe boot support   Hrushikesh Salunke
• [PATCH v4 01/10] arm: mach-k3: j784s4: Update SoC autogen data to enable PCIe boot   Hrushikesh Salunke
• [PATCH v4 02/10] phy: cadence: Add config to enable Cadence Torrent PHY at SPL stage   Hrushikesh Salunke
• [PATCH v4 03/10] phy: ti: Add config to enable J721E WIZ SERDES wrapper at SPL stage   Hrushikesh Salunke
• [PATCH v4 04/10] configs: j784s4_evm_r5_defconfig: Enable configs for PCIe boot   Hrushikesh Salunke
• [PATCH v4 05/10] configs: j784s4_evm_a72_defconfig: Enable configs for PCIe boot   Hrushikesh Salunke
• [PATCH v4 06/10] configs: am69_sk_r5_defconfig: Disable PCIe boot configs   Hrushikesh Salunke
• [PATCH v4 07/10] configs: am69_sk_a72_defconfig: Disable PCIe boot configs   Hrushikesh Salunke
• [PATCH v4 08/10] configs: j742s2_evm_r5_defconfig: Disable PCIe boot configs   Hrushikesh Salunke
• [PATCH v4 09/10] configs: j742s2_evm_a72_defconfig: Disable PCIe boot configs   Hrushikesh Salunke
• [PATCH v4 10/10] docs: board: ti: j784s4_evm: Add PCIe boot documentation   Hrushikesh Salunke
• [PATCH v2 0/2] Enable dynamic MMU page table sizing   Pranav Sanwal
• [PATCH v2 1/2] fdtdec: Add declaration for get_next_memory_node() helper   Pranav Sanwal
• [PATCH v2 2/2] arm64: versal2: Populate DRAM banks before page table size calculation   Pranav Sanwal
• [PATCH v3 0/2] Enable dynamic MMU page table sizing   Pranav Sanwal
• [PATCH v3 1/2] fdtdec: Add declaration for get_next_memory_node() helper   Pranav Sanwal
• [PATCH v3 2/2] arm64: versal2: Populate DRAM banks before page table size calculation   Pranav Sanwal
• [PATCH v4 0/2] Enable dynamic MMU page table sizing   Pranav Sanwal
• [PATCH v4 1/2] fdtdec: Add declaration for get_next_memory_node() helper   Pranav Sanwal
• [PATCH v4 2/2] arm64: versal2: Populate DRAM banks before page table size calculation   Pranav Sanwal
• [PATCH v2 6/7] am33xx: Support upstream devicetree binding   Markus Schneider-Pargmann
• [PATCH v2 7/7] configs: am335x_evm_defconfig: Switch to upstream devicetree   Markus Schneider-Pargmann
• [PATCH v2 1/4] panel: Add missing comment for the timing argument   Markus Schneider-Pargmann
• [PATCH v3 4/9] configs: am335x_evm: Unify evm board defconfigs   Markus Schneider-Pargmann
• [PATCH v6 07/13] arm: mach-k3: common: Helper for LPM meta data address from DT   Markus Schneider-Pargmann
• [PATCH v6 08/13] arm: mach-k3: am62a7_init: Resume on LPM exit   Markus Schneider-Pargmann
• [PATCH v6 10/13] arm: dts: k3-am62a: Add r5 device nodes   Markus Schneider-Pargmann
• [PATCH v6 11/13] arm: dts: k3-am62p: Add r5 device nodes   Markus Schneider-Pargmann
• [PATCH v7 06/13] arm: mach-k3: common: Add lpm_resume_from_ddr   Markus Schneider-Pargmann
• [PATCH] i2c: cdns: Add timeout for RXDV status bit polling   Heiko Schocher
• [PATCH v3 0/6] Add support for SM3 secure hash   Heiko Schocher
• [PATCH v3 0/6] Add support for SM3 secure hash   Heiko Schocher
• [PATCH v3 0/6] Add support for SM3 secure hash   Heiko Schocher
• [PATCH] i2c: cdns: Add timeout for RXDV status bit polling   Heiko Schocher
• [PATCH v2] i2c: samsung: add support for Exynos7 HS-I2C   Heiko Schocher
• [PATCH 1/1] cmd: lwip/wget: avoid NULL dereference in _set_cacert()   Heinrich Schuchardt
• [PATCH 0/2] RISC-V: implement private GCC library   Heinrich Schuchardt
• [PATCH 1/2] RISC-V: implement private GCC library   Heinrich Schuchardt
• [PATCH 2/2] test: provide unit tests for the RISC-V private GCC library   Heinrich Schuchardt
• [PATCH 0/2] RISC-V: implement private GCC library   Heinrich Schuchardt
• [PATCH 1/2] RISC-V: implement private GCC library   Heinrich Schuchardt
• [PATCH 2/2] test: provide unit tests for the RISC-V private GCC library   Heinrich Schuchardt
• [PATCH 1/2] RISC-V: implement private GCC library   Heinrich Schuchardt
• [PATCH 1/2] RISC-V: implement private GCC library   Heinrich Schuchardt
• [PATCH 1/2] RISC-V: implement private GCC library   Heinrich Schuchardt
• [PATCH v3] doc: board: starfive: update jh7110 common description   Heinrich Schuchardt
• Dropping macOS and Windows host tool builds and support in U-Boot   Heinrich Schuchardt
• [PATCH] efi_loader: Trigger capsule updates with automatically generated boot options   Heinrich Schuchardt
• [RFC PATCH] efi_loader: disk: Add print to show ESP device   Heinrich Schuchardt
• Pull request efi-2026-01-rc4 for master branch   Heinrich Schuchardt
• [PATCH] doc: Update urllib3 version for building   Heinrich Schuchardt
• [PATCH] doc: Update urllib3 version for building   Heinrich Schuchardt
• [PATCH 1/1] lib: uuid: add EFI_PARTITION_INFO_PROTOCOL_GUID translation   Heinrich Schuchardt
• [PATCH] Makefile: use --output-target instead of --target   Heinrich Schuchardt
• [PATCH 1/1] test: dm: clk_ccf: clean up assert statements   Heinrich Schuchardt
• [PATCH 1/1] tools: use setuptools 78.1.1   Heinrich Schuchardt
• [U-BOOT TESTHOOKS][PATCH 1/1] py/travis-ci: add u_boot_boardenv_qemu_riscv64_smode_(acpi_)na.py   Heinrich Schuchardt
• [PATCH 1/1] configs: qemu_arm64: disable SEMIHOSTING   Heinrich Schuchardt
• [U-BOOT TESTHOOKS][PATCH 1/1] py/travis-ci: add u_boot_boardenv_qemu_riscv64_smode_(acpi_)na.py   Heinrich Schuchardt
• [PATCH 0/5] net: Port NFS to LWIP   Heinrich Schuchardt
• Pull request efi-2026-01-rc5   Heinrich Schuchardt
• [PATCH v2] efi_loader: Trigger capsule updates with automatically generated boot options   Heinrich Schuchardt
• [PATCH 2/8] boot: fix prompt for SPL_LOAD_FIT_ADDRESS   Heinrich Schuchardt
• [PATCH 1/1] efi_selftest: enhance LoadImage test   Heinrich Schuchardt
• [PATCH v2] efi_loader: Trigger capsule updates with automatically generated boot options   Heinrich Schuchardt
• [PATCH v2 1/1] efi_selftest: Enhance LoadImage test   Heinrich Schuchardt
• [PATCH v3] efi_loader: Trigger capsule updates with automatically generated boot options   Heinrich Schuchardt
• Re: [PATCH v3] efi_loader: Trigger capsule updates with automatically generated boot options   Heinrich Schuchardt
• [PATCH 2/2] efi_loader: Fix kernel panic when FTRACE is enabled   Heinrich Schuchardt
• [PATCH 1/1] efi_selftest: remove unnecessary __efi_runtime_data attribute   Heinrich Schuchardt
• [PATCH 1/2] timer: tsc_timer: Fix FTRACE support   Heinrich Schuchardt
• [PATCH 1/1] test: The LMB test depends on CONFIG_LMB   Heinrich Schuchardt
• [PATCH v2 2/3] doc: cmd: bdinfo: specify required dependency for some info   Heinrich Schuchardt
• [PATCH 1/1] cmd/bdinfo: LMB and device-tree are not related   Heinrich Schuchardt
• [PATCH 1/1] lmb: always enforce CONFIG_LMB   Heinrich Schuchardt
• [PATCH 2/2] efi_loader: Fix kernel panic when FTRACE is enabled   Heinrich Schuchardt
• [RFC 0/8] trace: improve support   Heinrich Schuchardt
• [RFC 1/8] trace: correct handling of recursive call   Heinrich Schuchardt
• [RFC 2/8] trace: initr_trace must succeed initr_dm   Heinrich Schuchardt
• [RFC 3/8] test: test_trace: remove invalid assert   Heinrich Schuchardt
• [RFC 4/8] trace: increase TRACE_CALL_DEPTH_LIMIT   Heinrich Schuchardt
• [RFC 5/8] cmd/meminfo: display of addresses above 4 GiB   Heinrich Schuchardt
• [RFC 6/8] test: cmd: consider configuration in meminfo test   Heinrich Schuchardt
• [RFC 7/8] test: initf_malloc is only traced with EARLY_TRACE   Heinrich Schuchardt
• [RFC 8/8] test: clean up test_trace.py code   Heinrich Schuchardt
• [PATCH 1/1] test: The LMB test depends on CONFIG_LMB   Heinrich Schuchardt
• [PATCH v2 1/1] cmd/bdinfo: LMB and device-tree are not related   Heinrich Schuchardt
• [PATCH v2 1/3] test: env: Add test for environment storage in SPI NOR   Heinrich Schuchardt
• [PATCH v2 2/3] env: Add single to redundant environment upgrade path   Heinrich Schuchardt
• [PATCH v2 3/3] configs: sandbox: Enable environment in SPI NOR support   Heinrich Schuchardt
• Re: [PATCH v2 1/3] test: env: Add test for environment storage in SPI NOR   Heinrich Schuchardt
• [PATCH v2 1/1] test: The LMB test depends on CONFIG_LMB   Heinrich Schuchardt
• [U-Boot testhooks][PATCH v2 1/1] py/travis-ci: add u_boot_boardenv_qemu_riscv64_smode_(acpi_)na.py   Heinrich Schuchardt
• Pull request efi-next-20251225 (for next branch)   Heinrich Schuchardt
• [PATCH] Fix typo "addtional" -> "additional" in pflash section.   Heinrich Schuchardt
• [RFC 1/8] trace: correct handling of recursive call   Heinrich Schuchardt
• [PATCH v2 1/1] Fix typo "addtional" -> "additional" in pflash section.   Heinrich Schuchardt
• [PATCH 1/1] .gitignore: add vpl/   Heinrich Schuchardt
• [PATCH 1/1] doc: describe QEMU networking   Heinrich Schuchardt
• [PATCH v2 1/1] efi_loader: implement a HOB list   Heinrich Schuchardt
• [PATCH v3 3/6] rtc: goldfish: Support platform data for non-DT probing   Heinrich Schuchardt
• [PATCH v3 1/6] serial: Add Goldfish TTY driver   Heinrich Schuchardt
• [PATCH 1/1] doc: describe QEMU VGA emulation   Heinrich Schuchardt
• [PATCH 1/1] video: menu "TrueType Fonts" depends on TrueType enabled   Heinrich Schuchardt
• [PATCH 1/1] cmd: command `font` should depend on CONSOLE_TRUETYPE   Heinrich Schuchardt
• [PATCH v2 2/2] doc: emulation: Add network testing documentation   Heinrich Schuchardt
• [PATCH 1/1] video: correct label for cyclic video_idle   Heinrich Schuchardt
• [PATCH 0/4] Fix CONFIG_CC_OPTIMIZE_FOR_DEBUG support   Heinrich Schuchardt
• [PATCH 1/4] Makefile: repair CONFIG_CC_OPTIMIZE_FOR_DEBUG support   Heinrich Schuchardt
• [PATCH 2/4] test: do not imply os_malloc() outside of the sandbox   Heinrich Schuchardt
• [PATCH 3/4] dm: add missing includes in dm/of_addr.h   Heinrich Schuchardt
• [PATCH 4/4] dm: dummy implementations of live-tree functions   Heinrich Schuchardt
• [PATCH v2 1/1] video: correct label for cyclic video_idle   Heinrich Schuchardt
• [PATCH] Update links to doc/develop/falcon.rst   Heinrich Schuchardt
• [BUG] Raxda Rock Pi 4A serial console output stops prematurely   Quentin Schulz
• [PATCH RFC 0/4] fit: print conf node compatibles + use property string constants   Quentin Schulz
• [PATCH 1/1] binman: fallback to importlib_resources on Python 3.8   Quentin Schulz
• [PATCH] pinctrl: single: Add missing free in single_allocate_function   Quentin Schulz
• [PATCH next v2 0/4] fit: print conf node compatibles + use property string constants   Quentin Schulz
• [PATCH next v2 1/4] boot/fit: use constants for property strings   Quentin Schulz
• [PATCH next v2 2/4] lib: rsa: use FIT_ALGO_PROP constant instead of "algo" in FIT   Quentin Schulz
• [PATCH next v2 3/4] boot/fit: declare (and use) new constant for conf's compatible prop   Quentin Schulz
• [PATCH next v2 4/4] boot/fit: print all configuration node compatibles   Quentin Schulz
• [PATCH] pinctrl: single: Add missing free in single_allocate_function   Quentin Schulz
• [PATCH v3 4/4] tools: binman: fit: add tests for signing with an OpenSSL engine   Quentin Schulz
• [PATCH v3 4/4] tools: binman: fit: add tests for signing with an OpenSSL engine   Quentin Schulz
• [PATCH 01/23] board: st: Drop old LED code from stm32f429-disco   Quentin Schulz
• [PATCH 01/23] board: st: Drop old LED code from stm32f429-disco   Quentin Schulz
• [PATCH 02/23] board: st: Update LED management for stm32mp1   Quentin Schulz
• [PATCH 03/23] board: st: Update LED management for stm32mp2   Quentin Schulz
• [PATCH 04/23] configs: stm32: Enable LED config flags for stm32f429-disco   Quentin Schulz
• [PATCH 05/23] configs: stm32: Enable LED config flags for stm32f429-disco   Quentin Schulz
• [PATCH 06/23] configs: stm32: Enable LED config flags for stm32f746-disco   Quentin Schulz
• [PATCH 07/23] configs: stm32: Enable LED config flags for stm32f769-disco   Quentin Schulz
• [PATCH 08/23] configs: stm32: Enable LED config flags for stm32h743-disco   Quentin Schulz
• [PATCH 09/23] configs: stm32: Enable LED config flags for stm32h743-eval   Quentin Schulz
• [PATCH 10/23] configs: stm32: Enable LED config flags for stm32h747-disco   Quentin Schulz
• [PATCH 11/23] configs: stm32mp13: Enable LED_BOOT for stm32mp13_defconfig   Quentin Schulz
• [PATCH 12/23] configs: stm32mp15: Enable LED_BOOT for stm32mp15_defconfig   Quentin Schulz
• [PATCH 13/23] configs: stm32mp15: Enable LED_BOOT for stm32mp15_basic_defconfig   Quentin Schulz
• [PATCH 14/23] configs: stm32mp15: Enable LED_BOOT for stm32mp15_trusted_defconfig   Quentin Schulz
• [PATCH 15/23] configs: stm32mp2: Enable LED_BOOT for stm32mp25_defconfig   Quentin Schulz
• [PATCH 16/23] configs: stm32mp2: Enable LED_BOOT for stm32mp23_defconfig   Quentin Schulz
• [PATCH 17/23] ARM: dts: stm32: Drop "u-boot-led" and "error-led" from stm32mp135f-dk-u-boot   Quentin Schulz
• [PATCH 18/23] ARM: dts: stm32: Drop "u-boot-led" and "error-led" from stm32mp157a-dk1-scmi-u-boot   Quentin Schulz
• [PATCH 19/23] ARM: dts: stm32: Drop "u-boot-led" and "error-led" from stm32mp157a-dk1-u-boot   Quentin Schulz
• [PATCH 20/23] ARM: dts: stm32: Drop "u-boot-led" and "error-led" from stm32mp157c-ed1-scmi-u-boot   Quentin Schulz
• [PATCH 21/23] ARM: dts: stm32: Drop "u-boot-led" and "error-led" from stm32mp157c-ed1-u-boot   Quentin Schulz
• [PATCH 22/23] ARM: dts: stm32: Drop "u-boot-led" from stm32mp235f-dk-u-boot   Quentin Schulz
• [PATCH 23/23] ARM: dts: stm32: Drop "u-boot-led" from stm32mp257f-ev1-u-boot   Quentin Schulz
• [PATCH] pinctrl: single: Add missing free in single_allocate_function   Quentin Schulz
• [PATCH 02/23] board: st: Update LED management for stm32mp1   Quentin Schulz
• [PATCH 17/23] ARM: dts: stm32: Drop "u-boot-led" and "error-led" from stm32mp135f-dk-u-boot   Quentin Schulz
• [PATCH v2] nitrogen6x: change maintainer   Quentin Schulz
• [PATCH] MAINTAINERS: update my email address   Quentin Schulz
• [PATCH] fs: ext4fs: Free memory while handling errors   Quentin Schulz
• [PATCH] rockchip: rk3568-nanopi-r5: Drop duplicated/extra sdhci   Quentin Schulz
• [PATCH] rockchip: rk356x: Stop overriding sdhci/mmc aliases   Quentin Schulz
• [PATCH] cmd: part: Fix part argument description for `part number`   Quentin Schulz
• [docs] [PATCH 1/2] ref-manual/variables.rst: document the IMAGE_CONTAINER_NO_DUMMY variable   Quentin Schulz
• [docs] [PATCH v3 4/5] ref-manual/system-requirements.rst: fix AlmaLinux PDF build   Quentin Schulz
• [PATCH 0/8] various Kconfig option changes   Quentin Schulz
• [PATCH 1/8] Kconfig: put TPL_OPTIMIZE_INLINING next to SPL_OPTIMIZE_INLINING   Quentin Schulz
• [PATCH 2/8] boot: fix prompt for SPL_LOAD_FIT_ADDRESS   Quentin Schulz
• [PATCH 3/8] boot: fix prompt for SPL_LOAD_FIT_APPLY_OVERLAY_BUF_SZ   Quentin Schulz
• [PATCH 4/8] boot: fix prompt for VPL_LOAD_FIT_FULL   Quentin Schulz
• [PATCH 5/8] boot: specify VPL_FIT_FULL_CHECK applies to VPL   Quentin Schulz
• [PATCH 6/8] spl: fix prompt for SPL_BOOTROM_SUPPORT   Quentin Schulz
• [PATCH 7/8] power: regulator: fix dependency for REGULATOR_PWM   Quentin Schulz
• [PATCH 8/8] power: regulator: remove SPL_REGULATOR_PWM due to unmeetable SPL_DM_PWM dependency   Quentin Schulz
• [PATCH 2/8] boot: fix prompt for SPL_LOAD_FIT_ADDRESS   Quentin Schulz
• [PATCH v2] fs: ext4fs: Free memory while handling errors   Quentin Schulz
• [PATCH v1 5/7] usb: Kconfig: imply DM_USB_GADGET   Quentin Schulz
• [PATCH] lib: elf: Fix typo   Quentin Schulz
• [PATCH v2 0/3] rockchip: more templating for binman and switch SPI image to rksd by default   Quentin Schulz
• [PATCH v2 1/3] rockchip: binman: template idbloader.img for MMC and SPI images   Quentin Schulz
• [PATCH v2 2/3] rockchip: make rksd the default format for SPI images   Quentin Schulz
• [PATCH v2 3/3] rockchip: rk3288-tinker-s: remove duplicate include   Quentin Schulz
• [PATCH next v2] sunxi: remove usage of legacy LED API   Quentin Schulz
• [PATCH v2 2/3] rockchip: make rksd the default format for SPI images   Quentin Schulz
• [PATCH v2 2/3] rockchip: make rksd the default format for SPI images   Quentin Schulz
• [PATCH v2 2/3] rockchip: make rksd the default format for SPI images   Quentin Schulz
• [PATCH] cmd: bdinfo: fix incorrect Kconfig options check for print_eth()   Quentin Schulz
• [PATCH] doc: pytest: fix typo in multiple config options example for buildconfigspec   Quentin Schulz
• [PATCH] cmd: bdinfo: fix incorrect Kconfig options check for print_eth()   Quentin Schulz
• [PATCH] cmd: bdinfo: fix incorrect Kconfig options check for print_eth()   Quentin Schulz
• [PATCH] cmd: bdinfo: fix incorrect Kconfig options check for print_eth()   Quentin Schulz
• [PATCH 0/3] cmd: bdinfo: further document   Quentin Schulz
• [PATCH 1/3] cmd: bdinfo: provide long help with all options   Quentin Schulz
• [PATCH 2/3] doc: cmd: bdinfo: specify required dependency for some info   Quentin Schulz
• [PATCH 3/3] doc: cmd: bdinfo: document options   Quentin Schulz
• Rockchip RK3399 SOC is very slow   Quentin Schulz
• [PATCH 1/3] cmd: bdinfo: provide long help with all options   Quentin Schulz
• [PATCH v2] cmd: bdinfo: fix incorrect Kconfig options check for print_eth()   Quentin Schulz
• [PATCH v2 0/3] cmd: bdinfo: further document   Quentin Schulz
• [PATCH v2 1/3] cmd: bdinfo: provide long help with all options   Quentin Schulz
• [PATCH v2 2/3] doc: cmd: bdinfo: specify required dependency for some info   Quentin Schulz
• [PATCH v2 3/3] doc: cmd: bdinfo: document options   Quentin Schulz
• [PATCH] spl: fix incorrect dependency for SPL_NET   Quentin Schulz
• [PATCH] boot: fix missing dependency for BOOTMETH_ANDROID   Quentin Schulz
• Re: [PATCH v2 2/3] doc: cmd: bdinfo: specify required dependency for some info   Quentin Schulz
• [PATCH v3 0/6] Enable USB3 Super-Speed support for QCM6490/SC7280   Balaji Selvanathan
• [PATCH v3 1/6] drivers: clk: qcom: sc7280: Add USB3 PHY pipe clock   Balaji Selvanathan
• [PATCH v3 2/6] drivers: usb: dwc3: Add delay after core soft reset   Balaji Selvanathan
• [PATCH v3 3/6] drivers: phy: qcom: Add QMP USB3-DP Combo PHY driver   Balaji Selvanathan
• [PATCH v3 4/6] arch: arm: mach-snapdragon: Auto-detect USB SSPHY driver support   Balaji Selvanathan
• [PATCH v3 5/6] configs: qcm6490: Enable super-speed USB support   Balaji Selvanathan
• [PATCH v3 6/6] MAINTAINERS: Add entry for Qualcomm PHY drivers   Balaji Selvanathan
• [PATCH v2 3/7] drivers: phy: qcom: Add QMP USB3-DP Combo PHY driver   Balaji Selvanathan
• [PATCH v2 4/7] arch: arm: mach-snapdragon: Make USB speed fixup configurable   Balaji Selvanathan
• [PATCH v2 5/7] arch: arm: dts: qcs6490-rb3gen2: Override USB3 PHY clocks   Balaji Selvanathan
• [PATCH] efi_loader: Trigger capsule updates with automatically generated boot options   Balaji Selvanathan
• [PATCH] efi_loader: Trigger capsule updates with automatically generated boot options   Balaji Selvanathan
• [PATCH] Revert "drivers: scsi: fix inaccurate block count reporting in scsi operations"   Balaji Selvanathan
• [PATCH v1] drivers: scsi: fix double decrement of block count in 64-bit LBA path   Balaji Selvanathan
• [PATCH] Revert "drivers: scsi: fix inaccurate block count reporting in scsi operations"   Balaji Selvanathan
• [PATCH] Revert "drivers: scsi: fix inaccurate block count reporting in scsi operations"   Balaji Selvanathan
• [PATCH] Revert "drivers: scsi: fix inaccurate block count reporting in scsi operations"   Balaji Selvanathan
• [PATCH v2] drivers: scsi: fix double decrement of block count in 64-bit LBA path   Balaji Selvanathan
• [PATCH] Revert "drivers: scsi: fix inaccurate block count reporting in scsi operations"   Balaji Selvanathan
• [PATCH v2] usb: gadget: Kconfig: Correct Qualcomm config name used   Balaji Selvanathan
• [PATCH v2 2/7] drivers: usb: dwc3: Add delay after core soft reset   Balaji Selvanathan
• [PATCH v3] doc: board: starfive: update jh7110 common description   E Shattow
• [PATCH v3] doc: board: starfive: update jh7110 common description   E Shattow
• [PATCH v4] doc: board: starfive: update jh7110 common description   E Shattow
• [PATCH v2 0/5] Add upstream board Xunlong Orange Pi RV   E Shattow
• [PATCH v2 1/5] dt-bindings: riscv: starfive: add xunlong,orangepi-rv   E Shattow
• [PATCH v2 2/5] riscv: dts: starfive: add Orange Pi RV   E Shattow
• [PATCH v2 3/5] board: starfive: visionfive2: Add Orange Pi RV selection by product_id   E Shattow
• [PATCH v2 4/5] configs: starfive: Add Orange Pi RV to visionfive2   E Shattow
• [PATCH v2 5/5] doc: board: starfive: Add Xunlong OrangePi RV   E Shattow
• [PATCH v2 4/5] configs: starfive: Add Orange Pi RV to visionfive2   E Shattow
• [PATCH v4] SDRAM Calibration Failed fix for GEN5 SoCFPGA   Ralph Siemsen
• [PATCH v2 3/5] spl: mmc: Respect sector value passed to mmc_load_image_raw_partition   Ralph Siemsen
• [PATCH v2 3/5] spl: mmc: Respect sector value passed to mmc_load_image_raw_partition   Ralph Siemsen
• [PATCH v2 4/5] arch: arm: mach-socfpga: Adjust a raw sectors for MMC loading of U-Boot from SPL   Ralph Siemsen
• [PATCH v4] SDRAM Calibration Failed fix for GEN5 SoCFPGA   Ralph Siemsen
• [PATCH v4] SDRAM Calibration Failed fix for GEN5 SoCFPGA   Ralph Siemsen
• [PATCH] spi: designware: Allow disabling designware driver in SPL   Ralph Siemsen
• [PATCH] spi: designware: Allow disabling designware driver in SPL   Ralph Siemsen
• [PATCH v2] spi: designware: Allow disabling designware driver in SPL   Ralph Siemsen
• [PATCH v4] SDRAM Calibration Failed fix for GEN5 SoCFPGA   Ralph Siemsen
• [PATCH v4] SDRAM Calibration Failed fix for GEN5 SoCFPGA   Ralph Siemsen
• [PATCH v4] SDRAM Calibration Failed fix for GEN5 SoCFPGA   Ralph Siemsen
• How to boot u-boot from embedded ELF file in Microblaze core   Michal Simek
• [PATCH] xilinx: mbv32: Disable floating point   Michal Simek
• [PATCH] xilinx: mbv: Disable SPL GZIP   Michal Simek
• [PATCH] xilinx: mbv: Remove debug UART support   Michal Simek
• [PATCH] board: xilinx: add SPL boot device support   Michal Simek
• [RFC PATCH] efi_loader: disk: Add print to show ESP device   Michal Simek
• [PATCH] arm64: versal: Fix LTO for mini_ospi/mini_qspi   Michal Simek
• [PATCH] xilinx: mbv: Update defconfigs as per memory map   Michal Simek
• [PATCH] arm64: versal2: Populate DRAM banks before page table size calculation   Michal Simek
• [PATCH] arm64: versal2: Populate DRAM banks before page table size calculation   Michal Simek
• [PATCH] common: memtop: Update the MEM_RGN_COUNT macro to 64   Michal Simek
• [PATCH 1/4] xilinx: amd: Enable the PCA9541 I2C Bus arbiter   Michal Simek
• [PATCH] cadence_qspi: Remove duplicated return   Michal Simek
• [PATCH] cadence_qspi: Update the delays for flash reset   Michal Simek
• [PATCH] arm64: versal2: Read and show multiboot value   Michal Simek
• [PATCH] xilinx: versal: Get rid of xlnx-versal-power.h from bindings   Michal Simek
• [PATCH] i2c: cdns: Add timeout for RXDV status bit polling   Michal Simek
• [PATCH] ufs: Disable UTP command timeout in slow mode   Michal Simek
• [PATCH] xilinx: mbv32: Disable floating point   Michal Simek
• [PATCH] xilinx: mbv: Disable SPL GZIP   Michal Simek
• [PATCH] xilinx: mbv: Remove debug UART support   Michal Simek
• [PATCH] board: xilinx: add SPL boot device support   Michal Simek
• [PATCH] xilinx: mbv: Update defconfigs as per memory map   Michal Simek
• [PATCH v2 0/6] net: Port NFS to lwIP   Michal Simek
• [PATCH] ufs: amd-versal2: Fix reset names with binding   Michal Simek
• [PATCH] clk: Do not return signed value from clk_get_rate()   Michal Simek
• [PATCH] ufs: amd-versal2: Fix clock name with binding   Michal Simek
• [PATCH] cmd: bdinfo: fix incorrect Kconfig options check for print_eth()   Michal Simek
• [PATCH 1/3] cmd: bdinfo: provide long help with all options   Michal Simek
• [PATCH v4 0/2] Enable dynamic MMU page table sizing   Michal Simek
• [PATCH v1 1/1] arch/arm/mach-zynqmp: configure default BL32_LOAD_ADDR   Michal Simek
• [PATCH v4 0/2] Enable dynamic MMU page table sizing   Michal Simek
• [GIT PULL] AMD/Xilinx changes for 2026.04-rc1   Michal Simek
• [PATCH] arm64: zynqmp: Enable pci root port driver   Michal Simek
• [PATCH v3] spi-nor: add support for XM25QH01D   Ssunk
• [PATCH v5 0/8] riscv: Add support for P8700 platform on Boston board   Uros Stajic
• [PATCH v5 1/8] riscv: Add initial support for P8700 SoC   Uros Stajic
• [PATCH v5 2/8] board: boston-riscv: Add initial support for P8700 Boston board   Uros Stajic
• [PATCH v5 3/8] gpio: Add GPIO driver for Intel EG20T   Uros Stajic
• [PATCH v5 4/8] pci: xilinx: Avoid writing memory base/limit for root bridge   Uros Stajic
• [PATCH v5 5/8] riscv: Add syscon driver for MIPS GIC block   Uros Stajic
• [PATCH v5 6/8] net: pch_gbe: Add PHY reset and MAC address fallback for RISC-V   Uros Stajic
• [PATCH v5 7/8] libfdt: Allow non-64b aligned memreserve entries   Uros Stajic
• [PATCH v5 8/8] riscv: p8700: Add Coherence Manager (CM) and IOCU support   Uros Stajic
• [PATCH] cmd: nvedit: Validate argument count before use   Vincent Stehlé
• [PATCH 0/2] Add support for MT8188   Julien Stephan
• [PATCH 1/2] arm: mediatek: add support for MediaTek MT8188 SoC   Julien Stephan
• [PATCH 2/2] clk: mediatek: add MT8188 clock driver   Julien Stephan
• [PATCH 1/2] arm: mediatek: add support for MediaTek MT8188 SoC   Julien Stephan
• [PATCH 2/2] clk: mediatek: add MT8188 clock driver   Julien Stephan
• [PATCH v2 0/2] Add support for MT8188   Julien Stephan
• [PATCH v2 1/2] arm: mediatek: add support for MediaTek MT8188 SoC   Julien Stephan
• [PATCH v2 2/2] clk: mediatek: add MT8188 clock driver   Julien Stephan
• [PATCH 2/2] clk: mediatek: add MT8188 clock driver   Julien Stephan
• [PATCH 0/3] Fix compilation issue on regulator_common file   Julien Stephan
• [PATCH 1/3] power: regulator: common: remove unnecessary debug trace   Julien Stephan
• [PATCH 2/3] power: regulator: common: use dm_gpio_is_valid helper   Julien Stephan
• [PATCH 3/3] power: regulator: common: fix compilation issue   Julien Stephan
• [PATCH] pinctrl: mediatek: fix compilation issue   Julien Stephan
• [PATCH 4/9] clk: mediatek: fix fixed clock parents   Julien Stephan
• [PATCH v9] Add optimized Makefile support for SoCFPGA handoff   Brian Sune
• [PATCH v1] update GCC version check after Kbuild bump   Brian Sune
• [PATCH v1 1/3] sync sdram ecc support to mainstream   Brian Sune
• [PATCH v1 2/3] sync sdram ecc support to mainstream   Brian Sune
• [PATCH v1 3/3] sync sdram ecc support to mainstream   Brian Sune
• [PATCH v1] fix PL330 CMD supported target   Brian Sune
• [PATCH v1] Replace TARGET namespace and cleanup properly   Brian Sune
• [PATCH v2] Replace TARGET namespace and cleanup properly   Brian Sune
• [PATCH v1 0/3] Add CoreCourse socfpga Board   Brian Sune
• [PATCH v1 1/3] Add CoreCourse socfpga Board   Brian Sune
• [PATCH v1 2/3] Add CoreCourse socfpga Board   Brian Sune
• [PATCH v1 3/3] Add CoreCourse socfpga Board   Brian Sune
• [PATCH v1] Add CoreCourse socfpga Board - AC501   Brian Sune
• [PATCH v1] Add CoreCourse socfpga Board - AC550   Brian Sune
• [PATCH v2 0/2] Add-CoreCourse-socfpga-Board   Brian Sune
• [PATCH v2 1/2] Add CoreCourse socfpga Board - AC501   Brian Sune
• [PATCH v2 2/2] Add CoreCourse socfpga Board - AC550   Brian Sune
• [PATCH 0/2] cmd: mtd: fix default read behavior and boundary checks   Peter Suti
• [PATCH 1/2] cmd: mtd: fix read failure on default full partition read with bad blocks   Peter Suti
• [PATCH 2/2] cmd: mtd: fix default length calculation when offset is specified   Peter Suti
• [PATCH 0/2] clk: renesas: Fix booting Linux on R8A77995 D3   Niklas Söderlund
• [PATCH 1/2] clk: renesas: Do not enable MSTP4 modules on R8A77995 D3   Niklas Söderlund
• [PATCH 2/2] clk: renesas: Do not disable realtime modules on R8A77995 D3   Niklas Söderlund
• [PATCH 1/2] clk: renesas: Do not enable MSTP4 modules on R8A77995 D3   Niklas Söderlund
• [PATCH 2/2] clk: renesas: Do not disable realtime modules on R8A77995 D3   Niklas Söderlund
• [PATCH v2 0/2] clk: renesas: Fix booting Linux on R8A77995 D3   Niklas Söderlund
• [PATCH v2 1/2] clk: renesas: Do not enable MSTP4 extra modules on R8A77995 D3   Niklas Söderlund
• [PATCH v2 2/2] clk: renesas: Do not disable realtime modules on R8A77995 D3   Niklas Söderlund
• [PATCH 1/2] cmd: mtd: fix read failure on default full partition read with bad blocks   Michael Nazzareno Trimarchi
• [PATCH 2/2] cmd: mtd: fix default length calculation when offset is specified   Michael Nazzareno Trimarchi
• [PATCH 3/3] dm: core: Default to using DEVRES outside of xPL   Michael Nazzareno Trimarchi
• [PATCH 3/3] dm: core: Default to using DEVRES outside of xPL   Michael Nazzareno Trimarchi
• [PATCH 3/3] dm: core: Default to using DEVRES outside of xPL   Michael Nazzareno Trimarchi
• [PATCH v2 2/2] imx: Support i.MX91 11x11 FRDM board   Francesco Valla
• [PATCH v2 0/2] Add FRDM-IMX91 initial support   Francesco Valla
• [PATCH v3 2/2] imx: Support i.MX91 11x11 FRDM board   Francesco Valla
• [PATCH v3 2/2] imx: Support i.MX91 11x11 FRDM board   Francesco Valla
• [PATCH v4 0/2] Add FRDM-IMX91 initial support   Francesco Valla
• [PATCH v2] arm: mach-k3: j722s: Fix eMMC boot functionality broken by Ethernet boot   Chintan Vankar
• [PATCH v3] arm: mach-k3: j722s: Fix eMMC boot functionality broken by Ethernet boot   Chintan Vankar
• [PATCH v2] arm: mach-k3: j722s: Fix eMMC boot functionality broken by Ethernet boot   Chintan Vankar
• [PATCH] boot/image-fit.c: Restore building tools on macOS   Marek Vasut
• [PATCH v2] imx9: scmi: soc: USB instance number change for silicon revision B0   Marek Vasut
• Re: 回复: [PATCH v1 1/4] ehci-mx6: Add powerup_fixup implementation   Marek Vasut
• [PATCH 0/3] Synchronize DTC to 1.7.2   Marek Vasut
• [PATCH v3 1/3] arm64: renesas: Add Renesas R-Car Gen5 infrastructure   Marek Vasut
• [PATCH v3 2/3] arm64: dts: renesas: Add Renesas R-Car X5H R8A78000 SoC DTs   Marek Vasut
• [PATCH v3 3/3] arm64: dts: renesas: Add Renesas R-Car X5H R8A78000 Ironhide board code   Marek Vasut
• [PATCH 0/3] Synchronize DTC to 1.7.2   Marek Vasut
• [PATCH v2] scripts/dtc: Update to upstream version v1.7.2-35-g52f07dcca47c   Marek Vasut
• [PULL] u-boot-sh/master   Marek Vasut
• [PATCH 1/2] imx: container: Eliminate IMX_PQC_SUPPORT   Marek Vasut
• [PULL] u-boot-sh/master   Marek Vasut
• [PULL] Pull request for u-boot next / v2026.04 = u-boot-stm32-20251205   Marek Vasut
• [PATCH 2/3] clk: scmi: Fix priv initialization in scmi_clk_gate()   Marek Vasut
• [PATCH 2/3] clk: scmi: Fix priv initialization in scmi_clk_gate()   Marek Vasut
• [PATCH] imx9: scmi: clock: Correct imx_clk_scmi_enable   Marek Vasut
• [PATCH 1/2] clk: scmi: export scmi_clk_resolve_attr   Marek Vasut
• [PATCH 0/2] clk: scmi: Fix name defer   Marek Vasut
• [PATCH] firmware: scmi: sandbox: Use scmi_clk_state_in_v2   Marek Vasut
• [PATCH v2 2/3] clk: stm322mp13: Resolve scmi clk before using it   Marek Vasut
• [PATCH 1/2] usb: dwc3-generic: allow fallback of dr_mode property to "otg"   Marek Vasut
• [PATCH 2/2] usb: dwc3-generic: add support for exynos7870   Marek Vasut
• [PATCH v1 2/7] usb: ehci-mx6: Fix usb_oc_config() for i.MX7/8M/9/7ULP/8 and 8ULP platforms   Marek Vasut
• [PATCH v1 3/7] usb: ehci-mx6: Extract PHY initialization into reusable function   Marek Vasut
• [PATCH v1 4/7] usb: ci_udc: Convert driver to DM_USB_GADGET   Marek Vasut
• [PATCH v2 2/3] clk: scmi: Fix priv initialization in scmi_clk_gate()   Marek Vasut
• [PATCH v2] firmware: scmi: sandbox: Use scmi_clk_state_in_v2   Marek Vasut
• [PATCH V2] imx9: scmi: clock: Correct imx_clk_scmi_enable   Marek Vasut
• [PATCH] cmd: nvedit: Validate argument count before use   Marek Vasut
• [PATCH] configs: sandbox: Select environment in FAT FS support   Marek Vasut
• [PATCH 1/3] configs: sandbox: Enable environment in SPI NOR support   Marek Vasut
• [PATCH 2/3] test: env: Add test for environment storage in SPI NOR   Marek Vasut
• [PATCH 3/3] env: Add single to redundant environment upgrade path   Marek Vasut
• [PATCH v3 1/3] clk: scmi: Fix typo scmi_clk_get_attibute   Marek Vasut
• [PATCH v3 2/3] clk: scmi: Fix priv initialization in scmi_clk_gate()   Marek Vasut
• [PATCH v3 3/3] clk: scmi: Remove duplicated scmi_generic_protocol_version() request   Marek Vasut
• [PATCH 3/3] env: Add single to redundant environment upgrade path   Marek Vasut
• [PATCH 2/2] usb: dwc3-generic: add support for exynos7870   Marek Vasut
• [PATCH v4 1/3] clk: scmi: Fix typo scmi_clk_get_attibute   Marek Vasut
• [PATCH v4 3/3] clk: scmi: Remove duplicated scmi_generic_protocol_version() request   Marek Vasut
• [PATCH v4 2/3] clk: scmi: Fix priv initialization in scmi_clk_gate()   Marek Vasut
• [PATCH v4 2/3] clk: scmi: Fix priv initialization in scmi_clk_gate()   Marek Vasut
• [PATCH 0/2] clk: scmi: Fix name defer   Marek Vasut
• [PATCH 3/3] env: Add single to redundant environment upgrade path   Marek Vasut
• [PATCH v2] kbuild: Produce diff between base DT and U-Boot augmented DT if DEVICE_TREE_DEBUG=1   Marek Vasut
• [PATCH v3] kbuild: Produce diff between base DT and U-Boot augmented DT if DEVICE_TREE_DEBUG=1   Marek Vasut
• [PATCH v3 0/3] Restore boot for STM32MP13/STM32MP2 board family   Marek Vasut
• [PATCH v3 3/3] clk: stm32: Update clock management for STM32MP13/25   Marek Vasut
• [PATCH] net: ravb: Configure CXR31 and CXR35 on rzg2l   Marek Vasut
• [PATCH v2 1/3] test: env: Add test for environment storage in SPI NOR   Marek Vasut
• [PATCH v2 2/3] env: Add single to redundant environment upgrade path   Marek Vasut
• [PATCH v2 3/3] configs: sandbox: Enable environment in SPI NOR support   Marek Vasut
• [PULL] u-boot-sh/master   Marek Vasut
• [PATCH] net: ravb: Configure CXR31 and CXR35 on rzg2l   Marek Vasut
• [PATCH v2 2/3] env: Add single to redundant environment upgrade path   Marek Vasut
• [PATCH v2 1/3] test: env: Add test for environment storage in SPI NOR   Marek Vasut
• Re: 回复: [PATCH v1 2/7] usb: ehci-mx6: Fix usb_oc_config() for i.MX7/8M/9/7ULP/8 and 8ULP platforms   Marek Vasut
• [PATCH 1/2] clk: renesas: Do not enable MSTP4 modules on R8A77995 D3   Marek Vasut
• [PATCH 2/2] clk: renesas: Do not disable realtime modules on R8A77995 D3   Marek Vasut
• [PATCH] m68k: Assure end of U-Boot is at 8-byte aligned offset   Marek Vasut
• [PATCH] Makefile: Make flash.bin target available on i.MX9   Marek Vasut
• [PATCH 1/2] clk: renesas: Do not enable MSTP4 modules on R8A77995 D3   Marek Vasut
• [PATCH v2 2/2] clk: renesas: Do not disable realtime modules on R8A77995 D3   Marek Vasut
• [PATCH v2 1/2] clk: renesas: Do not enable MSTP4 extra modules on R8A77995 D3   Marek Vasut
• [PULL] u-boot-sh/master   Marek Vasut
• [PATCH v2 1/2] clk: renesas: Do not enable MSTP4 extra modules on R8A77995 D3   Marek Vasut
• [PATCH] mmc: Add power stabilization delay in mmc_power_on()   Marek Vasut
• [PATCH 3/3] env: Add single to redundant environment upgrade path   Marek Vasut
• [PATCH v3 3/3] clk: stm32: Update clock management for STM32MP13/25   Marek Vasut
• [PATCH v2 1/3] test: env: Add test for environment storage in SPI NOR   Marek Vasut
• [PATCH v2 1/3] test: env: Add test for environment storage in SPI NOR   Marek Vasut
• [PATCH v2 2/3] clk: stm322mp13: Resolve scmi clk before using it   Marek Vasut
• [PATCH v2 1/3] test: env: Add test for environment storage in SPI NOR   Marek Vasut
• [PATCH 1/2] usb: dwc3-generic: allow fallback of dr_mode property to "otg"   Marek Vasut
• [PATCH v5 2/3] Image size checks: Clarify help texts   Marek Vasut
• [PATCH v5 3/3] Makefile: Deduplicate image size checks   Marek Vasut
• [PATCH v5 1/3] Image size checks: Use HAS_SIZE_LIMIT consistently   Marek Vasut
• [PATCH] MAINTAINERS: update my email address   Linus Walleij
• [PATCH v2] MAINTAINERS: update my email address   Linus Walleij
• [PATCH] MAINTAINERS: update my email address   Linus Walleij
• [PATCH] Change email addresses for B&R Industrial Automation   Wolfgang Wallner
• [PATCH] board: BuR: Update MAINTAINERS files   Wolfgang Wallner
• [PATCH] board: BuR: Update MAINTAINERS files   Wolfgang Wallner
• [PATCH v2] board: BuR: Update MAINTAINERS files   Wolfgang Wallner
• [PATCH] pwm: aspeed: replace %pe in dev_err()   ChiaWei Wang
• [EXT] Re: [PATCH] mmc: Add power stabilization delay in mmc_power_on()   Luke Wang
• [PATCH] fs/erofs: Fix realloc error handling   Gao Xiang
• [PATCH] mmc: meson_gx_mmc: reduce maximum frequency   Nick Xie
• Pull request: u-boot-rockchip-20251214   Kever Yang
• [BUG] [v2026.01-rc4] hush: while/until loop unexpectedly skipped   Shiji Yang
• [PATCH] common: cli_hush: clear Ctrl-C pressed flag before exiting loop commands   Shiji Yang
• [PATCH] common: cli_hush: terminate all commands when Ctrl-C is pressed   Shiji Yang
• [PATCH] common: cli_hush: clear Ctrl-C pressed flag before exiting loop commands   Shiji Yang
• [PATCH v2] common: cli_hush: terminate all commands when Ctrl-C is pressed   Shiji Yang
• [PATCH 0/2] mtd: spi: add support for new Flash chip BoyaMicro BY25Q256FS   Shiji Yang
• [PATCH 1/2] mtd: spi: simplify the conditional compilation of quad_enable feature   Shiji Yang
• [PATCH 2/2] mtd: spi: add support for BoyaMicro BY25Q256FS   Shiji Yang
• [PATCH] spi: add support for ISSI flash uboot 2025   Jeffrey Yu
• [PATCH v1 2/8] arm: Fix "file truncated" linker errors from empty built-in.a in SPL/TPL/VPL builds   Yuslaimi, Alif Zakuan
• [PATCH v4] SDRAM Calibration Failed fix for GEN5 SoCFPGA   Yuslaimi, Alif Zakuan
• [PATCH v1 2/5] ddr: socfpga: Add ECC DRAM scrubbing support for Gen5/Arria10   Yuslaimi, Alif Zakuan
• [PATCH v1 2/5] ddr: socfpga: Add ECC DRAM scrubbing support for Gen5/Arria10   Yuslaimi, Alif Zakuan
• [PATCH 1/2] RISC-V: implement private GCC library   Icenowy Zheng
• [PATCH 1/2] RISC-V: implement private GCC library   Icenowy Zheng
• [PATCH 1/2] RISC-V: implement private GCC library   Yao Zi
• [PATCH] MAINTAINERS: update my email address   Yao Zi
• [PATCH] riscv: Build SPL with -fno-pic   Yao Zi
• [PATCH v1 3/7] usb: ehci-mx6: Extract PHY initialization into reusable functionr   Yao Zi
• [PATCH v1 4/7] usb: ci_udc: Convert driver to DM_USB_GADGET   Yao Zi
• [PATCH v1 5/7] usb: Kconfig: imply DM_USB_GADGET   Yao Zi
• [PATCH 1/3] serial: Add Goldfish TTY driver   Yao Zi
• RV1103B: Attempt to upstream   Yao Zi
• [PATCH 1/3] serial: Add Goldfish TTY driver   Yao Zi
• [PATCH v2 1/4] serial: Add Goldfish TTY driver   Yao Zi
• [PATCH 0/4] fix multiple integer overflows in fs   Yao Zi
• [PATCH v3 1/6] serial: Add Goldfish TTY driver   Yao Zi
• [PATCH v3 2/6] timer: Add Goldfish timer driver   Yao Zi
• [BUG] silent hangup when debugging lib/fdtdec.c   alexander.feilke at ew.tq-group.com
• [resend v2 0/1] Enable random MAC address on CycloneV   alif.zakuan.yuslaimi at altera.com
• [resend v2 1/1] configs: cyclone5: Enable random MAC address   alif.zakuan.yuslaimi at altera.com
• [PATCH v1] configs: arria10: Disable mkeficapsule tool build   alif.zakuan.yuslaimi at altera.com
• [PATCH v1] ddr: altera: arria10: Fix incorrect address for mpu1   alif.zakuan.yuslaimi at altera.com
• [PATCH v1 0/5] SoCFPGA: Update DDR Support for Gen5/Arria10 in U-Boot   alif.zakuan.yuslaimi at altera.com
• [PATCH v1 1/5] arm: socfpga: Consolidate dram_bank_mmu_setup()   alif.zakuan.yuslaimi at altera.com
• [PATCH v1 2/5] ddr: socfpga: Add ECC DRAM scrubbing support for Gen5/Arria10   alif.zakuan.yuslaimi at altera.com
• [PATCH v1 3/5] ddr: altera: gen5: Add DRAM size checking   alif.zakuan.yuslaimi at altera.com
• [PATCH v1 4/5] ddr: altera: arria10: Add DRAM size checking   alif.zakuan.yuslaimi at altera.com
• [PATCH v1 5/5] arch: arm: socfpga: Assign unit address to memory node   alif.zakuan.yuslaimi at altera.com
• [PATCH 0/2] configs: apalis-imx8/colibri-imx8x: use default for SYS_MALLOC_F_LEN   max.oss.09 at gmail.com
• [PATCH 1/2] configs: apalis-imx8: use default for SYS_MALLOC_F_LEN   max.oss.09 at gmail.com
• [PATCH 2/2] configs: colibri-imx8x: use default for SYS_MALLOC_F_LEN   max.oss.09 at gmail.com
• [PATCH] phy: Add MSM8996 support to Qualcomm QUSB2 phy   nathbappai at gmail.com
• [PATCH] imx9: scmi: soc: USB instance number change for silicon revision B0   fedor.ross at ifm.com
• [PATCH 1/2] riscv: create a custom CPU implementation for PolarFire SoC   Jamie.Gibbons at microchip.com
• [PATCH] mmc: Add power stabilization delay in mmc_power_on()   ziniu.wang_1 at nxp.com
• [PATCH v1 1/2] imx8ulp_evk: Move environment variables to .env file   alice.guo at oss.nxp.com
• [PATCH v1 2/2] imx8ulp_evk: Switch to use devicetree imported from Linux kernel release   alice.guo at oss.nxp.com
• [PATCH v2 0/2] Updates the i.MX8ULP EVK board support   alice.guo at oss.nxp.com
• [PATCH v2 1/2] imx8ulp_evk: Move environment variables to .env file   alice.guo at oss.nxp.com
• [PATCH v2 2/2] imx8ulp_evk: Switch to use devicetree imported from Linux kernel release   alice.guo at oss.nxp.com
• [PATCH v3 0/3] Updates the i.MX8ULP EVK board support   alice.guo at oss.nxp.com
• [PATCH v3 1/3] imx8ulp_evk: Convert to standard boot   alice.guo at oss.nxp.com
• [PATCH v3 2/3] imx8ulp_evk: Move environment variables to .env file   alice.guo at oss.nxp.com
• [PATCH v3 3/3] imx8ulp_evk: Switch to use devicetree imported from Linux kernel release   alice.guo at oss.nxp.com
• [PATCH v2 0/5] Enable USB on i.MX8ULP EVK   alice.guo at oss.nxp.com
• [PATCH v2 1/5] ehci-mx6: Add powerup_fixup implementation   alice.guo at oss.nxp.com
• [PATCH v2 2/5] usb: ehci-mx6: Replace fdtdec_get_addr() with fdtdec_get_addr_size_auto_noparent()   alice.guo at oss.nxp.com
• [PATCH v2 3/5] usb: ehci-mx6: Add support for i.MX8ULP   alice.guo at oss.nxp.com
• [PATCH v2 4/5] imx8ulp: clock: Drop CONFIG_USB_MAX_CONTROLLER_COUNT dependency   alice.guo at oss.nxp.com
• [PATCH v2 5/5] imx8ulp_evk: Enable USB controller at 0x29920000 in host mode   alice.guo at oss.nxp.com
• [PATCH 0/7] Enable USB in device mode on i.MX8ULP EVK   alice.guo at oss.nxp.com
• [PATCH v1 1/7] usb: ehci-mx6: Move USB PHY register definitions to common header   alice.guo at oss.nxp.com
• [PATCH v1 2/7] usb: ehci-mx6: Fix usb_oc_config() for i.MX7/8M/9/7ULP/8 and 8ULP platforms   alice.guo at oss.nxp.com
• [PATCH v1 3/7] usb: ehci-mx6: Extract PHY initialization into reusable function   alice.guo at oss.nxp.com
• [PATCH v1 4/7] usb: ci_udc: Convert driver to DM_USB_GADGET   alice.guo at oss.nxp.com
• [PATCH v1 5/7] usb: Kconfig: imply DM_USB_GADGET   alice.guo at oss.nxp.com
• [PATCH v1 6/7] usb: gadget: ci_udc: Add i.MX8ULP support   alice.guo at oss.nxp.com
• [PATCH v1 7/7] imx8ulp_evk: Enable USB controller at 0x29920000 in device mode   alice.guo at oss.nxp.com
• [PATCH v2 0/4] Enable XSPI1 on i.MX943 EVK board   alice.guo at oss.nxp.com
• [PATCH v2 1/4] spi: nxp_xspi: Add new driver for NXP XSPI controller   alice.guo at oss.nxp.com
• [PATCH v2 2/4] misc: ele_api: Add support for XSPI SET GMID command   alice.guo at oss.nxp.com
• [PATCH v2 3/4] imx94_evk: Get ownership of XSPI control registers protected by GMID in SPL   alice.guo at oss.nxp.com
• [PATCH v2 4/4] imx943_evk: Enable XSPI1   alice.guo at oss.nxp.com

Last message date: Wed Dec 31 22:27:44 CET 2025
Archived on: Wed Dec 31 22:29:13 CET 2025

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...