[PATCH 2/2] clk: renesas: Do not disable realtime modules on R8A77995 D3

[Niklas Söderlund]

Later versions of the datasheet makes it clear D3 do not have any
realtime module stop control registers (RMSTPCRx). Remove the
manipulation of them from the module clock table to match this.

Suggested-by: Marek Vasut <marek.vasut+renesas at mailbox.org>
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas at ragnatech.se>
---
 drivers/clk/renesas/r8a77995-cpg-mssr.c | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/drivers/clk/renesas/r8a77995-cpg-mssr.c b/drivers/clk/renesas/r8a77995-cpg-mssr.c
index 0a59a19cb227..736812e04d0b 100644
--- a/drivers/clk/renesas/r8a77995-cpg-mssr.c
+++ b/drivers/clk/renesas/r8a77995-cpg-mssr.c
@@ -216,18 +216,18 @@ static const struct rcar_gen3_cpg_pll_config cpg_pll_configs[2] __initconst = {
 };
 
 static const struct mstp_stop_table r8a77995_mstp_table[] = {
-	{ 0x00210000, 0x0, 0x00210000, 0 },
-	{ 0x03e01000, 0x0, 0x03e01000, 0 },
-	{ 0x000e2fdc, 0x2000, 0x000e2fd8, 0 },
-	{ 0xc00014df, 0x400, 0xc00014df, 0 },
-	{ 0x80000004, 0x0, 0x80000004, 0 },
-	{ 0x40d20004, 0x0, 0x40d20004, 0 },
-	{ 0x08c0008c, 0x0, 0x08c0008c, 0 },
-	{ 0x09941c18, 0x0, 0x09941c18, 0 },
-	{ 0x00801087, 0x0, 0x00801087, 0 },
-	{ 0xf143dfc0, 0x0, 0xf143dfc0, 0 },
-	{ 0x063e1820, 0x0, 0x063e1820, 0 },
-	{ 0x00000000, 0x0, 0x00000000, 0 },
+	{ 0x00210000, 0x0, 0, 0 },
+	{ 0x03e01000, 0x0, 0, 0 },
+	{ 0x000e2fdc, 0x2000, 0, 0 },
+	{ 0xc00014df, 0x400, 0, 0 },
+	{ 0x80000004, 0x0, 0, 0 },
+	{ 0x40d20004, 0x0, 0, 0 },
+	{ 0x08c0008c, 0x0, 0, 0 },
+	{ 0x09941c18, 0x0, 0, 0 },
+	{ 0x00801087, 0x0, 0, 0 },
+	{ 0xf143dfc0, 0x0, 0, 0 },
+	{ 0x063e1820, 0x0, 0, 0 },
+	{ 0x00000000, 0x0, 0, 0 },
 };
 
 static const void *r8a77995_get_pll_config(const u32 cpg_mode)
-- 
2.52.0