[PATCH v1 1/1] arch/arm/mach-zynqmp: configure default BL32_LOAD_ADDR

[Neal Frager]

The default entry point address for the optee-os tee.bin for the zynqmp
platform is 0x60000000. For this reason, set the default u-boot BL32_LOAD_ADDR
to match the default optee-os entry point address of 0x60000000.

Signed-off-by: Neal Frager <neal.frager at amd.com>
---
 arch/arm/mach-zynqmp/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-zynqmp/Kconfig b/arch/arm/mach-zynqmp/Kconfig
index 151cfada436..8a4356bc060 100644
--- a/arch/arm/mach-zynqmp/Kconfig
+++ b/arch/arm/mach-zynqmp/Kconfig
@@ -138,7 +138,7 @@ config BL31_LOAD_ADDR
 
 config BL32_LOAD_ADDR
 	hex "Load address of BL32 image (mostly secure OS)"
-	default 0
+	default 0x60000000
 	help
 	  The load address for the BL32 image. This value is used to build the
 	  FIT image header that places BL32 in memory where it will run.
-- 
2.25.1