[PATCH] ARM: stm32: Add missing build of debug UART init code on DH STM32MP1 DHSOM

[Patrice CHOTARD]

On 12/3/25 15:23, Patrice CHOTARD wrote:
> 
> 
> On 11/19/25 00:17, Marek Vasut wrote:
>> Commit c37a6684818d ("stm32mp: fix compilation issue with DEBUG_UART")
>> split the debug UART initialization code into two files, but failed to
>> update other non-ST boards. This did not lead to noticeable breakage
>> until debug UART is enabled, which is not the default. Update the
>> Makefile accordingly to allow debug UART to work.
>>
>> Fixes: c37a6684818d ("stm32mp: fix compilation issue with DEBUG_UART")
>> Signed-off-by: Marek Vasut <marek.vasut at mailbox.org>
>> ---
>> Cc: Patrice Chotard <patrice.chotard at foss.st.com>
>> Cc: Patrick Delaunay <patrick.delaunay at foss.st.com>
>> Cc: Tom Rini <trini at konsulko.com>
>> Cc: u-boot at dh-electronics.com
>> Cc: u-boot at lists.denx.de
>> Cc: uboot-stm32 at st-md-mailman.stormreply.com
>> ---
>>  board/dhelectronics/dh_stm32mp1/Makefile | 2 ++
>>  1 file changed, 2 insertions(+)
>>
>> diff --git a/board/dhelectronics/dh_stm32mp1/Makefile b/board/dhelectronics/dh_stm32mp1/Makefile
>> index 2f4a301d1a0..429e01453bb 100644
>> --- a/board/dhelectronics/dh_stm32mp1/Makefile
>> +++ b/board/dhelectronics/dh_stm32mp1/Makefile
>> @@ -3,6 +3,8 @@
>>  # Copyright (C) 2018, STMicroelectronics - All Rights Reserved
>>  #
>>  
>> +obj-$(CONFIG_DEBUG_UART_BOARD_INIT) += ../../st/stm32mp1/debug_uart.o
>> +
>>  obj-$(CONFIG_PMIC_STPMIC1) += ../../st/common/stpmic1.o
>>  obj-y += board.o
>>  
> 
> 
> Reviewed-by: Patrice Chotard <patrice.chotard at foss.st.com>
> 
> Thanks
> Patrice
Applied to u-boot-stm32/next

Thanks
Patrice