[PATCH] arm: kirkwood: Remove unnecessary watchdog GPIO for ZyXEL NSA325 board

[Stefan Roese]

On 12/10/25 23:27, Tony Dinh wrote:
> Watchdog was already disabled in board/zyxel/nsa325/kwbimage.cfg.
> 
> Signed-off-by: Tony Dinh <mibodhi at gmail.com>

Reviewed-by: Stefan Roese <stefan.roese at mailbox.org>

Thanks,
Stefan

> ---
> 
>   board/zyxel/nsa325/nsa325.c | 7 +++----
>   1 file changed, 3 insertions(+), 4 deletions(-)
> 
> diff --git a/board/zyxel/nsa325/nsa325.c b/board/zyxel/nsa325/nsa325.c
> index 38340b33c8b..894c2ef293c 100644
> --- a/board/zyxel/nsa325/nsa325.c
> +++ b/board/zyxel/nsa325/nsa325.c
> @@ -1,6 +1,6 @@
>   // SPDX-License-Identifier: GPL-2.0+
>   /*
> - * Copyright (C) 2014-2023 Tony Dinh <mibodhi at gmail.com>
> + * Copyright (C) 2014-2025 Tony Dinh <mibodhi at gmail.com>
>    *
>    * Based on
>    * Copyright (C) 2014  Jason Plum <jplum at archlinuxarm.org>
> @@ -51,11 +51,10 @@ DECLARE_GLOBAL_DATA_PTR;
>   #define HDD1_GREEN_LED		BIT(9)
>   #define HDD1_RED_LED		BIT(10)
>   #define HDD2_POWER		BIT(15)
> -#define WATCHDOG_SIGNAL		BIT(14)
>   
>   #define NSA325_OE_HIGH		(~(COPY_GREEN_LED | COPY_RED_LED | \
> -				   HDD1_GREEN_LED | HDD1_RED_LED | HDD2_POWER | WATCHDOG_SIGNAL))
> -#define NSA325_VAL_HIGH		(WATCHDOG_SIGNAL | HDD2_POWER)
> +				   HDD1_GREEN_LED | HDD1_RED_LED | HDD2_POWER))
> +#define NSA325_VAL_HIGH		(HDD2_POWER)
>   
>   #define BTN_POWER				46
>   #define BTN_RESET				36