[PATCH] rockchip: rk3568-nanopi-r5: Drop duplicated/extra sdhci

[Quentin Schulz]

Hi Peter,

On 12/9/25 10:03 PM, Peter Robinson wrote:
> The pinctrl settings are now upstream, with the upstream
> voltage supplies, and the HS200 mode is confirmed to work
> fine but the HS400 mode had reported issues so let's just
> consume what the upstream DT has now as it's all known good.
> 
> Reported-by: Dusty Mabe <dusty at dustymabe.com>
> Tested-by: Dusty Mabe <dusty at dustymabe.com>
> Signed-off-by: Peter Robinson <pbrobinson at gmail.com>
> ---
>   arch/arm/dts/rk3568-nanopi-r5s-u-boot.dtsi | 8 --------
>   1 file changed, 8 deletions(-)
> 
> diff --git a/arch/arm/dts/rk3568-nanopi-r5s-u-boot.dtsi b/arch/arm/dts/rk3568-nanopi-r5s-u-boot.dtsi
> index 64c43374c04..7e24be1a5e7 100644
> --- a/arch/arm/dts/rk3568-nanopi-r5s-u-boot.dtsi
> +++ b/arch/arm/dts/rk3568-nanopi-r5s-u-boot.dtsi
> @@ -12,14 +12,6 @@
>   	/delete-property/ vpcie3v3-supply;
>   };
>   
> -&sdhci {
> -	cap-mmc-highspeed;

I'm assuming this isn't "necessary" since we have HS200 enabled? It 
isn't part of the upstream Linux DTS.

Considering we have HS200 support enabled in both SPL and proper, it 
should be used, so:

Reviewed-by: Quentin Schulz <quentin.schulz at cherry.de>

Thanks!
Quentin