[PATCH] riscv: Add support for BeagleV-Fire
Jan Kiszka
jan.kiszka at siemens.com
Sat Dec 20 15:56:04 CET 2025
On 09.12.25 12:45, Jamie Gibbons wrote:
> Bring U-Boot support for the BeagleV-Fire by adding a defconfig and
> supporting board files etc.
>
> Signed-off-by: Jamie Gibbons <jamie.gibbons at microchip.com>
> ---
> arch/riscv/Kconfig | 4 +
> board/beagle/beaglev_fire/Kconfig | 39 ++++++++
> board/beagle/beaglev_fire/MAINTAINERS | 7 ++
> board/beagle/beaglev_fire/Makefile | 6 ++
> board/beagle/beaglev_fire/beaglev_fire.c | 117 +++++++++++++++++++++++
> configs/beaglev_fire_defconfig | 29 ++++++
> include/configs/beaglev_fire.h | 57 +++++++++++
> 7 files changed, 259 insertions(+)
> create mode 100644 board/beagle/beaglev_fire/Kconfig
> create mode 100644 board/beagle/beaglev_fire/MAINTAINERS
> create mode 100644 board/beagle/beaglev_fire/Makefile
> create mode 100644 board/beagle/beaglev_fire/beaglev_fire.c
> create mode 100644 configs/beaglev_fire_defconfig
> create mode 100644 include/configs/beaglev_fire.h
>
> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> index 265b5320777..dd98dee8eab 100644
> --- a/arch/riscv/Kconfig
> +++ b/arch/riscv/Kconfig
> @@ -17,6 +17,9 @@ config TARGET_ANDES_VOYAGER
> config TARGET_BANANAPI_F3
> bool "Support BananaPi F3 Board"
>
> +config TARGET_BEAGLEBOARD_BEAGLEVFIRE
> + bool "Support BeagleBoard BeagleV-Fire Board (based on Microchip MPFS)"
> +
> config TARGET_K230_CANMV
> bool "Support K230 CanMV Board"
>
> @@ -106,6 +109,7 @@ config SPL_ZERO_MEM_BEFORE_USE
> source "board/andestech/ae350/Kconfig"
> source "board/andestech/voyager/Kconfig"
> source "board/aspeed/ibex_ast2700/Kconfig"
> +source "board/beagle/beaglev_fire/Kconfig"
> source "board/canaan/k230_canmv/Kconfig"
> source "board/emulation/qemu-riscv/Kconfig"
> source "board/microchip/mpfs_generic/Kconfig"
> diff --git a/board/beagle/beaglev_fire/Kconfig b/board/beagle/beaglev_fire/Kconfig
> new file mode 100644
> index 00000000000..279d38b3aa9
> --- /dev/null
> +++ b/board/beagle/beaglev_fire/Kconfig
> @@ -0,0 +1,39 @@
> +if TARGET_BEAGLEBOARD_BEAGLEVFIRE
> +
> +config SYS_BOARD
> + default "beaglev_fire"
> +
> +config SYS_VENDOR
> + default "beagle"
> +
> +config SYS_CPU
> + default "mpfs"
> +
> +config SYS_CONFIG_NAME
> + default "beaglev_fire"
> +
> +config TEXT_BASE
> + default 0x80000000 if !RISCV_SMODE
> + default 0x80200000 if RISCV_SMODE
> +
> +config BOARD_SPECIFIC_OPTIONS # dummy
> + def_bool y
> + select MICROCHIP_MPFS
> + select BOARD_EARLY_INIT_F
> + select BOARD_LATE_INIT
> + imply SMP
> + imply CMD_DHCP
> + imply CMD_EXT2
> + imply CMD_EXT4
> + imply CMD_FAT
> + imply CMD_FS_GENERIC
> + imply CMD_NET
> + imply CMD_PING
> + imply CMD_MMC
> + imply DOS_PARTITION
> + imply EFI_PARTITION
> + imply IP_DYN
> + imply ISO_PARTITION
> + imply PHY_LIB
> + imply PHY_VITESSE
> +endif
> diff --git a/board/beagle/beaglev_fire/MAINTAINERS b/board/beagle/beaglev_fire/MAINTAINERS
> new file mode 100644
> index 00000000000..a5dad93ee99
> --- /dev/null
> +++ b/board/beagle/beaglev_fire/MAINTAINERS
> @@ -0,0 +1,7 @@
> +BeagleBoard MPFS BeagleV-Fire
> +M: Cyril Jean <cyril.jean at microchip.com>
> +M: Jamie Gibbons <jamie.gibbons at microchip.com>
> +S: Maintained
> +F: board/beagle/beaglev_fire/
> +F: include/configs/beaglev_fire.h
> +F: configs/beaglev_fire_defconfig
> \ No newline at end of file
> diff --git a/board/beagle/beaglev_fire/Makefile b/board/beagle/beaglev_fire/Makefile
> new file mode 100644
> index 00000000000..a4109a8aad4
> --- /dev/null
> +++ b/board/beagle/beaglev_fire/Makefile
> @@ -0,0 +1,6 @@
> +# SPDX-License-Identifier: GPL-2.0+
> +#
> +# Copyright (C) 2023 Microchip Technology Inc.
> +#
> +
> +obj-y += beaglev_fire.o
> \ No newline at end of file
> diff --git a/board/beagle/beaglev_fire/beaglev_fire.c b/board/beagle/beaglev_fire/beaglev_fire.c
> new file mode 100644
> index 00000000000..b2f18c455b7
> --- /dev/null
> +++ b/board/beagle/beaglev_fire/beaglev_fire.c
> @@ -0,0 +1,117 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2019-2023 Microchip Technology Inc.
> + */
> +
> +#include <dm.h>
> +#include <dm/devres.h>
> +#include <env.h>
> +#include <asm/global_data.h>
> +#include <asm/io.h>
> +#include <linux/compat.h>
> +#include <mpfs-mailbox.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +#define MPFS_SYSREG_SOFT_RESET ((unsigned int *)0x20002088)
> +#define PERIPH_RESET_VALUE 0x800001e8u
> +
> +#if IS_ENABLED(CONFIG_MPFS_SYSCONTROLLER)
> +static unsigned char mac_addr[6];
> +#endif
> +
> +int board_init(void)
> +{
> + /* For now nothing to do here. */
> +
> + return 0;
> +}
> +
> +int board_early_init_f(void)
> +{
> + unsigned int val;
> +
> + /* Reset uart, mmc peripheral */
> + val = readl(MPFS_SYSREG_SOFT_RESET);
> + val = (val & ~(PERIPH_RESET_VALUE));
> + writel(val, MPFS_SYSREG_SOFT_RESET);
> +
> + return 0;
> +}
> +
> +int board_late_init(void)
> +{
> +#if IS_ENABLED(CONFIG_MPFS_SYSCONTROLLER)
> + u32 ret;
> + int node;
> + u8 device_serial_number[16] = {0};
> + void *blob = (void *)gd->fdt_blob;
> + struct udevice *dev;
> + struct mpfs_sys_serv *sys_serv_priv;
> +
> + ret = uclass_get_device_by_name(UCLASS_MISC, "syscontroller", &dev);
> + if (ret) {
> + debug("%s: system controller setup failed\n", __func__);
> + return ret;
> + }
> +
> + sys_serv_priv = devm_kzalloc(dev, sizeof(*sys_serv_priv), GFP_KERNEL);
> + if (!sys_serv_priv)
> + return -ENOMEM;
> +
> + sys_serv_priv->dev = dev;
> +
> + sys_serv_priv->sys_controller = mpfs_syscontroller_get(dev);
> + ret = IS_ERR(sys_serv_priv->sys_controller);
> + if (ret) {
> + debug("%s: Failed to register system controller sub device ret=%d\n", __func__, ret);
> + return -ENODEV;
> + }
> +
> + ret = mpfs_syscontroller_read_sernum(sys_serv_priv, device_serial_number);
> + if (ret) {
> + printf("Cannot read device serial number\n");
> + return -EINVAL;
> + }
> +
> + /* Update MAC address with device serial number */
> + mac_addr[0] = 0x00;
> + mac_addr[1] = 0x04;
> + mac_addr[2] = 0xA3;
> + mac_addr[3] = device_serial_number[2];
> + mac_addr[4] = device_serial_number[1];
> + mac_addr[5] = device_serial_number[0];
> +
> + node = fdt_path_offset(blob, "/soc/ethernet at 20110000");
> + if (node >= 0) {
> + ret = fdt_setprop(blob, node, "local-mac-address", mac_addr, 6);
> + if (ret) {
> + printf("Error setting local-mac-address property for ethernet at 20110000\n");
> + return -ENODEV;
> + }
> + }
> +
> + mpfs_syscontroller_process_dtbo(sys_serv_priv);
> +#endif
> +
> + return 0;
> +}
> +
> +int ft_board_setup(void *blob, struct bd_info *bd)
> +{
> +#if IS_ENABLED(CONFIG_MPFS_SYSCONTROLLER)
> + u32 ret;
> + int node;
> +
> + node = fdt_path_offset(blob, "/soc/ethernet at 20110000");
> + if (node >= 0) {
> + ret = fdt_setprop(blob, node, "local-mac-address", mac_addr, 6);
> + if (ret) {
> + printf("Error setting local-mac-address property for ethernet at 20110000\n");
> + return -ENODEV;
> + }
> + }
> +#endif
> +
> + return 0;
> +}
> \ No newline at end of file
> diff --git a/configs/beaglev_fire_defconfig b/configs/beaglev_fire_defconfig
> new file mode 100644
> index 00000000000..c476fb103c5
> --- /dev/null
> +++ b/configs/beaglev_fire_defconfig
> @@ -0,0 +1,29 @@
> +CONFIG_RISCV=y
> +CONFIG_SYS_MALLOC_LEN=0x800000
> +CONFIG_SYS_MALLOC_F_LEN=0x2000
> +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
> +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000
> +CONFIG_ENV_SIZE=0x2000
> +CONFIG_DEFAULT_DEVICE_TREE="microchip/mpfs-beaglev-fire"
> +CONFIG_SYS_PROMPT="RISC-V # "
> +CONFIG_OF_LIBFDT_OVERLAY=y
> +CONFIG_SYS_LOAD_ADDR=0x80200000
> +CONFIG_TARGET_BEAGLEBOARD_BEAGLEVFIRE=y
> +CONFIG_ARCH_RV64I=y
> +CONFIG_RISCV_SMODE=y
> +CONFIG_FIT=y
> +CONFIG_OF_BOARD_SETUP=y
> +CONFIG_DISTRO_DEFAULTS=y
> +CONFIG_DISPLAY_CPUINFO=y
> +CONFIG_DISPLAY_BOARDINFO=y
> +CONFIG_SYS_CBSIZE=256
> +CONFIG_SYS_PBSIZE=282
> +CONFIG_SYS_BOOTM_LEN=0x4000000
> +CONFIG_OVERWRITE_ETHADDR_ONCE=y
> +CONFIG_SYS_RELOC_GD_ENV_ADDR=y
> +CONFIG_BOOTP_SEND_HOSTNAME=y
> +CONFIG_SYSRESET=y
> +CONFIG_MPFS_GPIO=y
> +CONFIG_CMD_GPIO=y
> +CONFIG_DM_GPIO=y
> +CONFIG_MMC_SPI=y
I think you are missing CONFIG_OF_UPSTREAM=y. I applied this on top of
next and only got things compiling after turning it manually on.
> diff --git a/include/configs/beaglev_fire.h b/include/configs/beaglev_fire.h
> new file mode 100644
> index 00000000000..e3ee0f02f2d
> --- /dev/null
> +++ b/include/configs/beaglev_fire.h
> @@ -0,0 +1,57 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * Copyright (C) 2023 Microchip Technology Inc.
> + */
> +
> +#ifndef __CONFIG_H
> +#define __CONFIG_H
> +
> +#include <linux/sizes.h>
> +
> +#define CFG_SYS_SDRAM_BASE 0x80000000
> +
> +/* Environment options */
> +
> +#if defined(CONFIG_CMD_DHCP)
> +#define BOOT_TARGET_DEVICES_DHCP(func) func(DHCP, dhcp, na)
> +#else
> +#define BOOT_TARGET_DEVICES_DHCP(func)
> +#endif
> +
> +#if defined(CONFIG_CMD_MMC)
> +#define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0)
> +#else
> +#define BOOT_TARGET_DEVICES_MMC(func)
> +#endif
> +
> +#define BOOT_TARGET_DEVICES(func) \
> + BOOT_TARGET_DEVICES_MMC(func)\
> + BOOT_TARGET_DEVICES_DHCP(func)
> +
> +#define BOOTENV_DESIGN_OVERLAYS \
> + "design_overlays=" \
> + "if test -n ${no_of_overlays}; then " \
> + "setenv inc 1; " \
> + "setenv idx 0; " \
> + "fdt resize ${dtbo_size}; " \
> + "while test $idx -ne ${no_of_overlays}; do " \
> + "setenv dtbo_name dtbo_image${idx}; " \
> + "setenv fdt_cmd \"fdt apply $\"$dtbo_name; " \
> + "run fdt_cmd; " \
> + "setexpr idx $inc + $idx; " \
> + "done; " \
> + "fi;\0 " \
> +
> +#include <config_distro_bootcmd.h>
> +
> +#define CFG_EXTRA_ENV_SETTINGS \
> + "bootm_size=0x10000000\0" \
> + "kernel_addr_r=0x80200000\0" \
> + "fdt_addr_r=0x8a000000\0" \
> + "fdtoverlay_addr_r=0x8a080000\0" \
> + "ramdisk_addr_r=0x8aa00000\0" \
> + "scriptaddr=0x8e000000\0" \
> + BOOTENV_DESIGN_OVERLAYS \
> + BOOTENV \
> +
> +#endif /* __CONFIG_H */
No luck with booting next(29ab19c2bead)+this yet, though. No output after
[9.356454] Boot image set name: "PolarFire-SoC-HSS::U-Boot"
Am I missing dependencies?
Jan
--
Siemens AG, Foundational Technologies
Linux Expert Center
More information about the U-Boot
mailing list