[PATCH v2 2/3] arm: mvebu: db-xc3-24g4xg: Remove marvell, nand-keep-config

[Chris Packham]

nand-keep-config is used to retain the NAND controller configuration
from an earlier boot stage. In U-Boot's case there isn't an earlier boot
stage so reconfiguring the NAND controller is required.

Signed-off-by: Chris Packham <judge.packham at gmail.com>
---

Notes:
    Changes in v2:
    - None

 arch/arm/dts/armada-xp-db-xc3-24g4xg-u-boot.dtsi | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/dts/armada-xp-db-xc3-24g4xg-u-boot.dtsi b/arch/arm/dts/armada-xp-db-xc3-24g4xg-u-boot.dtsi
index dc20643bfa37..ad64813e7704 100644
--- a/arch/arm/dts/armada-xp-db-xc3-24g4xg-u-boot.dtsi
+++ b/arch/arm/dts/armada-xp-db-xc3-24g4xg-u-boot.dtsi
@@ -5,7 +5,6 @@
 	status = "okay";
 	label = "pxa3xx_nand-0";
 	nand-rb = <0>;
-	marvell,nand-keep-config;
 	nand-on-flash-bbt;
 	nand-ecc-strength = <4>;
 	nand-ecc-step-size = <512>;
-- 
2.52.0