[PATCH v1 3/7] usb: ehci-mx6: Extract PHY initialization into reusable functionr

[Yao Zi]

On Tue, Dec 16, 2025 at 02:38:35PM +0800, alice.guo at oss.nxp.com wrote:
> From: Alice Guo <alice.guo at nxp.com>
> 
> Extract USB PHY initialization code from ehci-mx6.c into a new function
> ehci_mx6_phy_init() that can be shared with the ChipIdea UDC driver.
> 
> Signed-off-by: Alice Guo <alice.guo at nxp.com>
> ---
>  drivers/usb/host/ehci-mx6.c | 73 ++++++++++++++++++++++++++++++++++++++++++++-
>  include/usb/ci_udc.h        |  9 ++++++
>  2 files changed, 81 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c
> index 03ff4ce10d5..52f14e6eca0 100644
> --- a/drivers/usb/host/ehci-mx6.c
> +++ b/drivers/usb/host/ehci-mx6.c
> @@ -12,6 +12,7 @@
>  #include <asm/global_data.h>
>  #include <linux/compiler.h>
>  #include <linux/delay.h>
> +#include <usb/ci_udc.h>
>  #include <usb/ehci-ci.h>
>  #include <asm/io.h>
>  #include <asm/arch/imx-regs.h>
> @@ -168,6 +169,54 @@ static void __maybe_unused
>  usb_power_config_mx7ulp(void *usbphy) { }
>  #endif
>  
> +#if defined(CONFIG_IMX8)
> +static void usb_power_config_imx8(void __iomem *usbphy_base)
> +{
> +	struct usbphy_regs __iomem *usbphy = (struct usbphy_regs __iomem *)usbphy_base;
> +
> +	if (!is_imx8())
> +		return;
> +
> +	int timeout = 1000000;
> +
> +	if (!(readl(&usbphy->usb1_pll_480_ctrl) & PLL_USB_LOCK_MASK)) {
> +		/* Enable the regulator first */
> +		writel(PLL_USB_REG_ENABLE_MASK,
> +		       &usbphy->usb1_pll_480_ctrl_set);
> +
> +		/* Wait at least 25us */
> +		udelay(25);
> +
> +		/* Enable the power */
> +		writel(PLL_USB_PWR_MASK, &usbphy->usb1_pll_480_ctrl_set);
> +
> +		/* Wait lock */
> +		while (timeout--) {
> +			if (readl(&usbphy->usb1_pll_480_ctrl) &
> +			    PLL_USB_LOCK_MASK)
> +				break;
> +			udelay(10);
> +		}

We have readX_poll_timeout() defined in include/linux/iopoll.h, I think
it could simplify the code here.

> +		if (timeout <= 0) {
> +			/* If timeout, we power down the pll */
> +			writel(PLL_USB_PWR_MASK,
> +			       &usbphy->usb1_pll_480_ctrl_clr);
> +			return;
> +		}
> +	}
> +
> +	/* Clear the bypass */
> +	writel(PLL_USB_BYPASS_MASK, &usbphy->usb1_pll_480_ctrl_clr);
> +
> +	/* Enable the PLL clock out to USB */
> +	writel((PLL_USB_EN_USB_CLKS_MASK | PLL_USB_ENABLE_MASK),
> +	       &usbphy->usb1_pll_480_ctrl_set);
> +}

Regards,
Yao Zi