[PATCH v2 5/5] imx8ulp_evk: Enable USB controller at 0x29920000 in host mode

[alice.guo at oss.nxp.com]

From: Alice Guo <alice.guo at nxp.com>

Update the i.MX8ULP EVK device tree files and defconfig to enable the
second USB controller (base address 0x29920000) on i.MX8ULP EVK in host
mode.

Signed-off-by: Alice Guo <alice.guo at nxp.com>
---
 arch/arm/dts/imx8ulp-evk-u-boot.dtsi | 4 ++++
 configs/imx8ulp_evk_defconfig        | 3 +++
 2 files changed, 7 insertions(+)

diff --git a/arch/arm/dts/imx8ulp-evk-u-boot.dtsi b/arch/arm/dts/imx8ulp-evk-u-boot.dtsi
index 860994129ae..e35653edc29 100644
--- a/arch/arm/dts/imx8ulp-evk-u-boot.dtsi
+++ b/arch/arm/dts/imx8ulp-evk-u-boot.dtsi
@@ -34,6 +34,10 @@
 	bootph-pre-ram;
 };
 
+&usbotg2 {
+	compatible = "fsl,imx8ulp-usb", "fsl,imx7ulp-usb", "fsl,imx27-usb";
+};
+
 &iomuxc1 {
 	bootph-all;
 };
diff --git a/configs/imx8ulp_evk_defconfig b/configs/imx8ulp_evk_defconfig
index ff6cd8e6c98..5fd73ce4ae9 100644
--- a/configs/imx8ulp_evk_defconfig
+++ b/configs/imx8ulp_evk_defconfig
@@ -54,6 +54,7 @@ CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_READ=y
+CONFIG_CMD_USB=y
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_REGULATOR=y
 CONFIG_CMD_EXT4_WRITE=y
@@ -92,4 +93,6 @@ CONFIG_FSL_LPUART=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_NXP_FSPI=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
 CONFIG_ULP_WATCHDOG=y

-- 
2.43.0