[PATCH 05/12] imx: imx8mp_evk: Switch to BOOTSTD

[Peng Fan (OSS)]

From: Peng Fan <peng.fan at nxp.com>

Move env to imx8mp_evk.env.
Switch to support BOOTSTD with a bsp bootcmd as fallback.

Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
 arch/arm/mach-imx/imx8m/Kconfig           |  2 ++
 board/freescale/imx8mp_evk/imx8mp_evk.env | 57 +++++++++++++++++++++++++++++++
 configs/imx8mp_evk_defconfig              |  3 +-
 include/configs/imx8mp_evk.h              | 21 ------------
 4 files changed, 61 insertions(+), 22 deletions(-)

diff --git a/arch/arm/mach-imx/imx8m/Kconfig b/arch/arm/mach-imx/imx8m/Kconfig
index b254a50b091a05393d99db6000dcfcb4427dfa5f..0cf3c1baffeecc5d7475e6f7b8d77539aa9646a2 100644
--- a/arch/arm/mach-imx/imx8m/Kconfig
+++ b/arch/arm/mach-imx/imx8m/Kconfig
@@ -227,6 +227,8 @@ config TARGET_IMX8MP_EVK
 	select ARCH_MISC_INIT
 	select SPL_CRYPTO if SPL
 	imply OF_UPSTREAM
+	imply BOOTSTD_FULL
+	imply BOOTSTD_BOOTCOMMAND
 
 config TARGET_IMX8MP_NAVQP
 	bool "Emcraft Systems i.MX8M Plus NavQ+ board"
diff --git a/board/freescale/imx8mp_evk/imx8mp_evk.env b/board/freescale/imx8mp_evk/imx8mp_evk.env
new file mode 100644
index 0000000000000000000000000000000000000000..18f6c6e200ede28201c95eb34c23a596e6771fb3
--- /dev/null
+++ b/board/freescale/imx8mp_evk/imx8mp_evk.env
@@ -0,0 +1,57 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+
+boot_fdt=try
+boot_fit=no
+boot_targets=mmc1 mmc2
+bootm_size=0x10000000
+console=ttymxc1,115200 earlycon=ec_imx6q,0x30890000,115200
+fdt_addr_r=0x43000000
+fdt_addr=0x43000000
+fdtfile=CONFIG_DEFAULT_FDT_FILE
+image=Image
+ip_dyn=yes
+mmcdev=CONFIG_SYS_MMC_ENV_DEV
+mmcpart=1
+mmcroot=/dev/mmcblk1p2 rootwait rw
+mmcautodetect=yes
+mmcargs=setenv bootargs ${jh_clk} ${mcore_clk} console=${console} root=${mmcroot}
+prepare_mcore=setenv mcore_clk clk-imx8mp.mcore_booted
+loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}
+loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdtfile}
+mmcboot=echo Booting from mmc ...;
+	run mmcargs;
+	if test ${boot_fit} = yes || test ${boot_fit} = try; then
+		bootm ${loadaddr};
+	else
+		if run loadfdt; then
+			booti ${loadaddr} - ${fdt_addr_r};
+		else
+			echo WARN: Cannot load the DT;
+		fi;
+	fi;
+netargs=setenv bootargs ${jh_clk} ${mcore_clk} console=${console} root=/dev/nfs
+	ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp
+netboot=echo Booting from net ...;
+	run netargs;
+	if test ${ip_dyn} = yes; then
+		setenv get_cmd dhcp;
+	else
+		setenv get_cmd tftp;
+	fi;
+	${get_cmd} ${loadaddr} ${image};
+	if test ${boot_fit} = yes || test ${boot_fit} = try; then
+		bootm ${loadaddr};
+	else
+		if ${get_cmd} ${fdt_addr_r} ${fdtfile}; then
+			booti ${loadaddr} - ${fdt_addr_r};
+		else
+			echo WARN: Cannot load the DT;
+		fi;
+	fi;
+bsp_bootcmd=echo Running BSP bootcmd ...;
+	mmc dev ${mmcdev};
+	if run loadimage; then
+		run mmcboot;
+	else
+		run netboot;
+	fi;
diff --git a/configs/imx8mp_evk_defconfig b/configs/imx8mp_evk_defconfig
index 5369f8b84a4172434dcef142c854d06e3437caf1..6a8f9c64d9bf93e77a83dd5780f7295b3893703c 100644
--- a/configs/imx8mp_evk_defconfig
+++ b/configs/imx8mp_evk_defconfig
@@ -5,6 +5,7 @@ CONFIG_SYS_MALLOC_LEN=0x2000000
 CONFIG_SPL_GPIO=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_ENV_SOURCE_FILE="imx8mp_evk"
 CONFIG_ENV_SIZE=0x1000
 CONFIG_ENV_OFFSET=0x400000
 CONFIG_DM_GPIO=y
@@ -26,8 +27,8 @@ CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_SPL_LOAD_FIT=y
-CONFIG_DISTRO_DEFAULTS=y
 CONFIG_OF_SYSTEM_SETUP=y
+CONFIG_BOOTCOMMAND="bootflow scan -lb; run bsp_bootcmd"
 CONFIG_DEFAULT_FDT_FILE="imx8mp-evk.dtb"
 CONFIG_SYS_CBSIZE=2048
 CONFIG_SYS_PBSIZE=2074
diff --git a/include/configs/imx8mp_evk.h b/include/configs/imx8mp_evk.h
index 741ee39db1a340136b57d9411d96bca995e0ebd2..dfb5cd22528ec4febee8a2fe069c17cfdd77decc 100644
--- a/include/configs/imx8mp_evk.h
+++ b/include/configs/imx8mp_evk.h
@@ -17,27 +17,6 @@
 
 #endif
 
-#define BOOT_TARGET_DEVICES(func) \
-       func(MMC, mmc, 1) \
-       func(MMC, mmc, 2)
-
-#include <config_distro_bootcmd.h>
-
-/* Initial environment variables */
-#define CFG_EXTRA_ENV_SETTINGS		\
-	BOOTENV \
-	"scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
-	"kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
-	"image=Image\0" \
-	"console=ttymxc1,115200 earlycon=ec_imx6q,0x30890000,115200\0" \
-	"fdt_addr_r=0x43000000\0"			\
-	"boot_fdt=try\0" \
-	"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
-	"initrd_addr=0x43800000\0"		\
-	"bootm_size=0x10000000\0" \
-	"mmcpart=1\0" \
-	"mmcroot=/dev/mmcblk1p2 rootwait rw\0" \
-
 /* Link Definitions */
 
 #define CFG_SYS_INIT_RAM_ADDR	0x40000000

-- 
2.35.3