January 2025 Archives by subject

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...

Starting: Wed Jan 1 00:54:12 CET 2025
Ending: Mon Jan 13 21:03:52 CET 2025
Messages: 1042

• [ANN / RFC] Regular community calls?   Tom Rini
• [ANN / RFC] Regular community calls?   Simon Glass
• [ANN / RFC] Regular community calls?   Tom Rini
• [ANN / RFC] Regular community calls?   Michael Nazzareno Trimarchi
• [ANN / RFC] Regular community calls?   Simon Glass
• [ANN / RFC] Regular community calls?   Tom Rini
• [ANN] U-Boot v2025.01 released   Tom Rini
• [EXTERNAL] Re: Proposal for a New Command to U-Boot Fuse Programming   Harsha Vardhan V M
• [PATCH 0/2]   Patrice Chotard
• [PATCH 0/2]   Patrice CHOTARD
• [PATCH 0/2] bootstd: android: Allow booting with AVB failures when unlocked   Mattijs Korpershoek
• [PATCH 0/2] MediaTek MT7629 OF_UPSTREAM migration   Weijie Gao
• [PATCH 0/2] spi: soft_spi: Add support for SPI_3WIRE   Hironori KIKUCHI
• [PATCH 0/2] stm32mp: Restore STM32MP257F-EV1 boot   Patrice Chotard
• [PATCH 0/2] tools: mkimage: Add Amlogic Boot Image type   Jonas Karlman
• [PATCH 0/3] bootstd: Fix efi_mgr usage in bootmeths env var   Sam Protsenko
• [PATCH 0/3] MediaTek ethernet driver refactor and updates   Weijie Gao
• [PATCH 0/3] net: use strnstr() for lwip_strnstr()   Heinrich Schuchardt
• [PATCH 0/3] pinctrl: qcom: add clk_req functions   Caleb Connolly
• [PATCH 0/4] efi_loader: enable running the debug UEFI shell   Heinrich Schuchardt
• [PATCH 0/4] efi_loader: enable running the debug UEFI shell   Simon Glass
• [PATCH 0/4] efi_loader: enable running the debug UEFI shell   Heinrich Schuchardt
• [PATCH 0/4] efi_loader: enable running the debug UEFI shell   Simon Glass
• [PATCH 0/4] upl: A few fixes to get EDK2 booting   Simon Glass
• [PATCH 0/8] efi_loader: Complete the bootflow_efi() test   Simon Glass
• [PATCH 0/8] efi_loader: Complete the bootflow_efi() test   Heinrich Schuchardt
• [PATCH 0/8] efi_loader: Complete the bootflow_efi() test   Simon Glass
• [PATCH 0/8] efi_loader: Complete the bootflow_efi() test   Heinrich Schuchardt
• [PATCH 0/8] efi_loader: Complete the bootflow_efi() test   Simon Glass
• [PATCH 0/8] efi_loader: Complete the bootflow_efi() test   Tom Rini
• [PATCH 0/8] efi_loader: Complete the bootflow_efi() test   Heinrich Schuchardt
• [PATCH 0/8] efi_loader: Complete the bootflow_efi() test   Caleb Connolly
• [PATCH 0/8] efi_loader: Complete the bootflow_efi() test   Simon Glass
• [PATCH 0/8] efi_loader: Complete the bootflow_efi() test   Simon Glass
• [PATCH 0/8] efi_loader: Complete the bootflow_efi() test   Tom Rini
• [PATCH 0/8] efi_loader: Complete the bootflow_efi() test   Simon Glass
• [PATCH 0/8] efi_loader: Complete the bootflow_efi() test   Tom Rini
• [PATCH 0/8] efi_loader: Complete the bootflow_efi() test   Simon Glass
• [PATCH 0/8] efi_loader: Complete the bootflow_efi() test   Tom Rini
• [PATCH 0/8] efi_loader: Complete the bootflow_efi() test   Simon Glass
• [PATCH 00/12] imx9: switch to bootstd for i.MX93/1 EVK/QSB and i.MX8M EVK   Peng Fan (OSS)
• [PATCH 00/12] imx9: switch to bootstd for i.MX93/1 EVK/QSB and i.MX8M EVK   Simon Glass
• [PATCH 00/12] imx9: switch to bootstd for i.MX93/1 EVK/QSB and i.MX8M EVK   Simon Glass
• [PATCH 00/12] imx9: switch to bootstd for i.MX93/1 EVK/QSB and i.MX8M EVK   Peng Fan
• [PATCH 00/12] imx9: switch to bootstd for i.MX93/1 EVK/QSB and i.MX8M EVK   Peng Fan
• [PATCH 00/12] imx9: switch to bootstd for i.MX93/1 EVK/QSB and i.MX8M EVK   Simon Glass
• [PATCH 00/12] imx9: switch to bootstd for i.MX93/1 EVK/QSB and i.MX8M EVK   Tony Dinh
• [PATCH 00/12] imx9: switch to bootstd for i.MX93/1 EVK/QSB and i.MX8M EVK   Peng Fan
• [PATCH 00/12] imx9: switch to bootstd for i.MX93/1 EVK/QSB and i.MX8M EVK   Simon Glass
• [PATCH 00/12] imx9: switch to bootstd for i.MX93/1 EVK/QSB and i.MX8M EVK   Frieder Schrempf
• [PATCH 00/12] rockchip: rk3399: Migrate to use TPL on bob and kevin   Kever Yang
• [PATCH 00/12] rockchip: rk3399: Migrate to use TPL on bob and kevin   Tom Rini
• [PATCH 00/13] Add support for Ethernet boot on AM62p-SK and AM68-SK   Chintan Vankar
• [PATCH 00/15] vbe: Series part F   Simon Glass
• [PATCH 00/67] upl: Align with the updated spec   Simon Glass
• [PATCH 00/67] upl: Align with the updated spec   Tom Rini
• [PATCH 00/67] upl: Align with the updated spec   Simon Glass
• [PATCH 00/67] upl: Align with the updated spec   Tom Rini
• [PATCH 00/67] upl: Align with the updated spec   Simon Glass
• [PATCH 01/11] rockchip: rk3288-firefly: Drop unused SPL_LED related code   Kever Yang
• [PATCH 01/12] imx: imx93_evk: switch to BOOTSTD   Peng Fan (OSS)
• [PATCH 01/12] imx: imx93_evk: switch to BOOTSTD   Fabio Estevam
• [PATCH 01/12] rockchip: rk3399: Fix TPL build of bob and kevin   Kever Yang
• [PATCH 01/13] net: tftp: Increase TFTP pkt string length to include null character   Chintan Vankar
• [PATCH 01/13] net: tftp: Increase TFTP pkt string length to include null character   Tom Rini
• [PATCH 01/13] net: tftp: Increase TFTP pkt string length to include null character   Vankar, Chintan
• [PATCH 01/13] net: tftp: Increase TFTP pkt string length to include null character   Tom Rini
• [PATCH 01/15] Revert "dm: SMEM (Shared memory) uclass"   Simon Glass
• [PATCH 01/15] vbe: Split out some VBE code into a common file   Simon Glass
• [PATCH 01/18] scripts: Add a script for building and booting QEMU   Tom Rini
• [PATCH 01/18] scripts: Add a script for building and booting QEMU   Simon Glass
• [PATCH 01/18] scripts: Add a script for building and booting QEMU   Tom Rini
• [PATCH 01/18] scripts: Add a script for building and booting QEMU   Simon Glass
• [PATCH 01/18] scripts: Add a script for building and booting QEMU   Tom Rini
• [PATCH 01/18] scripts: Add a script for building and booting QEMU   Simon Glass
• [PATCH 01/18] scripts: Add a script for building and booting QEMU   Tom Rini
• [PATCH 01/20] dt-bindings: clock, reset: Add support for rk3576   Kever Yang
• [PATCH 01/67] bloblist: Make BLOBLIST_ALLOC the default   Simon Glass
• [PATCH 02/11] rockchip: rk3288-firefly: Sort u-boot.dtsi nodes alphabetically   Kever Yang
• [PATCH 02/12] imx: imx93_qsb: switch to BOOTSTD   Peng Fan (OSS)
• [PATCH 02/12] rockchip: rk3399-gru: Use SYS_SPI_U_BOOT_OFFS value in offset prop   Kever Yang
• [PATCH 02/13] arm: mach-k3: j721s2: Update SoC auto-gen data to enable Ethernet boot   Chintan Vankar
• [PATCH 02/13] arm: mach-k3: j721s2: Update SoC auto-gen data to enable Ethernet boot   Bryan Brattlof
• [PATCH 02/15] smem: drop drivers/smem   Simon Glass
• [PATCH 02/15] vbe: Split out reading a FIT into a common file   Simon Glass
• [PATCH 02/15] vbe: Split out reading a FIT into a common file   Tom Rini
• [PATCH 02/15] vbe: Split out reading a FIT into a common file   Simon Glass
• [PATCH 02/20] dt-bindings: clock, reset: fix top-comment indentation rk3576 headers   Kever Yang
• [PATCH 02/67] abuf: Provide a way to get the buffer address   Simon Glass
• [PATCH 03/11] rockchip: rk3288-firefly: Set ethaddr env based on cpuid   Kever Yang
• [PATCH 03/12] imx: imx91_evk: switch to BOOTSTD   Peng Fan (OSS)
• [PATCH 03/12] rockchip: rk3399-gru: Move SPI flash payload offset for bob and kevin   Kever Yang
• [PATCH 03/13] arm: mach-k3: j721s2_spl: Alias Ethernet boot to CPGMAC   Chintan Vankar
• [PATCH 03/15] Revert "test: smem: add basic smem test"   Simon Glass
• [PATCH 03/15] vbe: Allocate space for the FIT header   Simon Glass
• [PATCH 03/20] dt-bindings: power: Add support for RK3576 SoC   Kever Yang
• [PATCH 03/67] abuf: Allow use in host tools   Simon Glass
• [PATCH 04/11] rockchip: rk3288-firefly: Use common bss and stack addresses   Kever Yang
• [PATCH 04/12] imx: imx8mp_evk: Enable dynamic settings to mmcdev and mmcroot   Peng Fan (OSS)
• [PATCH 04/12] rockchip: rk3399-gru: Fix include of TPL in u-boot.rom image   Kever Yang
• [PATCH 04/13] arm: mach-k3: j721s2_init: Probe AM65 CPSW NUSS for R5/A72 SPL   Chintan Vankar
• [PATCH 04/13] arm: mach-k3: j721s2_init: Probe AM65 CPSW NUSS for R5/A72 SPL   Roger Quadros
• [PATCH 04/15] Revert "drivers: smem: sandbox"   Simon Glass
• [PATCH 04/15] vbe: Allow VBE to load FITs on any architecture   Simon Glass
• [PATCH 04/67] abuf: Provide a constant buffer   Simon Glass
• [PATCH 05/11] rockchip: rk3288-firefly: Include required DT nodes in xPL   Kever Yang
• [PATCH 05/12] imx: imx8mp_evk: Switch to BOOTSTD   Peng Fan (OSS)
• [PATCH 05/12] rockchip: rk3399-gru: Use TPL with common bss and stack addresses   Kever Yang
• [PATCH 05/13] configs: am68: Add configs for enabling Ethboot in R5SPL   Chintan Vankar
• [PATCH 05/13] configs: am68: Add configs for enabling Ethboot in R5SPL   Roger Quadros
• [PATCH 05/13] configs: am68: Add configs for enabling Ethboot in R5SPL   Vankar, Chintan
• [PATCH 05/13] configs: am68: Add configs for enabling Ethboot in R5SPL   Roger Quadros
• [PATCH 05/15] soc: qcom: import smem from Linux 6.11-rc2   Simon Glass
• [PATCH 05/15] soc: qcom: import smem from Linux 6.11-rc2   Caleb Connolly
• [PATCH 05/15] vbe: Tidy up error checking with blk_read()   Simon Glass
• [PATCH 05/67] cpu: Provide a way to get the physical-address size   Simon Glass
• [PATCH 06/11] rockchip: rk3288-firefly: Include sdmmc regulator in SPL   Kever Yang
• [PATCH 06/12] imx: imx8mn_evk: Enable dynamic settings to mmcdev and mmcroot   Peng Fan (OSS)
• [PATCH 06/12] imx: imx8mn_evk: Enable dynamic settings to mmcdev and mmcroot   Fabio Estevam
• [PATCH 06/12] rockchip: rk3399-gru: Include binman generated FIT in u-boot.rom image   Kever Yang
• [PATCH 06/13] configs: am68: Enable configs required for Ethernet boot   Chintan Vankar
• [PATCH 06/13] configs: am68: Enable configs required for Ethernet boot   Roger Quadros
• [PATCH 06/15] soc: qcom: smem: adjust headers for U-Boot   Simon Glass
• [PATCH 06/15] vbe: Handle loading from an unaligned offset   Simon Glass
• [PATCH 06/67] serial: Support info() method in ns16550 xPL with UPL   Simon Glass
• [PATCH 07/11] rockchip: rk3288-firefly: Drop use of silent console and late boardinfo   Kever Yang
• [PATCH 07/12] imx: imx8mn_evk: Switch to BOOTSTD   Peng Fan (OSS)
• [PATCH 07/12] rockchip: rk3399: Drop common Kconfig options already implied   Kever Yang
• [PATCH 07/13] arm: dts: k3-am68-sk-base-board-u-boot: Add bootph-all property to necessary nodes   Chintan Vankar
• [PATCH 07/15] soc: qcom: smem: adjust for U-Boot   Simon Glass
• [PATCH 07/15] vbe: Allow loading loadables if there is no firmware   Simon Glass
• [PATCH 07/67] mkimage: Update map_to_sysmem() to match its prototype   Simon Glass
• [PATCH 08/11] rockchip: rk3288-firefly: Drop USE_PREBOOT Kconfig option   Kever Yang
• [PATCH 08/12] imx: imx8mm_evk: Enable dynamic settings to mmcdev and mmcroot   Peng Fan (OSS)
• [PATCH 08/12] rockchip: rk3399-gru: Remove unused nodes from xPL control FDT   Kever Yang
• [PATCH 08/13] arm: mach-k3: am62p: Update SoC auto-gen data to enable CPSW boot   Chintan Vankar
• [PATCH 08/13] arm: mach-k3: am62p: Update SoC auto-gen data to enable CPSW boot   Bryan Brattlof
• [PATCH 08/15] soc: qcom: smem: get serial number from socinfo   Simon Glass
• [PATCH 08/15] soc: qcom: smem: get serial number from socinfo   Stephan Gerhold
• [PATCH 08/15] vbe: Support loading an FDT from the FIT   Simon Glass
• [PATCH 08/67] x86: Emable meminfo command   Simon Glass
• [PATCH 08/67] x86: Emable meminfo command   Heinrich Schuchardt
• [PATCH 08/67] x86: Emable meminfo command   Simon Glass
• [PATCH 09/11] rockchip: rk3288-firefly: Migrate to OF_UPSTREAM   Kever Yang
• [PATCH 09/12] imx: imx8mm_evk: Switch to BOOTSTD   Peng Fan (OSS)
• [PATCH 09/12] rockchip: rk3399-gru: Enable dcache and signature validation in SPL   Kever Yang
• [PATCH 09/13] arm: mach-k3: am62p5_init: Probe AM65 CPSW NUSS for R5/A53 SPL   Chintan Vankar
• [PATCH 09/13] arm: mach-k3: am62p5_init: Probe AM65 CPSW NUSS for R5/A53 SPL   Bryan Brattlof
• [PATCH 09/13] arm: mach-k3: am62p5_init: Probe AM65 CPSW NUSS for R5/A53 SPL   Roger Quadros
• [PATCH 09/15] soc: qcom: smem: stub functions   Simon Glass
• [PATCH 09/15] spl: Add fields for VBE   Simon Glass
• [PATCH 09/20] rockchip: mkimage: Add rk3576 support   Kever Yang
• [PATCH 09/67] x86: Show the timestamp counter with bdinfo   Simon Glass
• [PATCH 1/1] doc: move licenses to doc/   Heinrich Schuchardt
• [PATCH 1/1] fs: eliminate YAFFS2 implementation   Heinrich Schuchardt
• [PATCH 1/1] fs: eliminate YAFFS2 implementation   Marek Vasut
• [PATCH 1/1] fs: eliminate YAFFS2 implementation   Tom Rini
• [PATCH 1/1] fs: eliminate YAFFS2 implementation   Simon Glass
• [PATCH 1/1] fs: eliminate YAFFS2 implementation   Marek Vasut
• [PATCH 1/1] fs: eliminate YAFFS2 implementation   Heinrich Schuchardt
• [PATCH 1/1] net: correct the description of ip_to_string()   Tom Rini
• [PATCH 1/1] tpm: update descriptions in tpm-v2.h header   Ilias Apalodimas
• [PATCH 1/2] bootstd: android: Add missing NULL in the avb partition list   Mattijs Korpershoek
• [PATCH 1/2] clk: mediatek: mt7629: fix gate offset of peri clock tree   Weijie Gao
• [PATCH 1/2] configs: stm32f769-disco: Set CYCLIC_MAX_CPU_TIME_US to 8000 for stm32f769-disco   Patrick DELAUNAY
• [PATCH 1/2] cyclic: Fix rollover every 72 min on 32 bits platforms   Patrice Chotard
• [PATCH 1/2] cyclic: Fix rollover every 72 min on 32 bits platforms   Alexander Dahl
• [PATCH 1/2] cyclic: Fix rollover every 72 min on 32 bits platforms   Stefan Roese
• [PATCH 1/2] efi_loader: efi_setup: Add efi_start_obj_list() to efi_setup.c   Heinrich Schuchardt
• [PATCH 1/2] efi_loader: efi_setup: Add efi_start_obj_list() to efi_setup.c   Simon Glass
• [PATCH 1/2] efi_loader: efi_setup: Add efi_start_obj_list() to efi_setup.c   Ilias Apalodimas
• [PATCH 1/2] efi_loader: efi_setup: Add efi_start_obj_list() to efi_setup.c   Simon Glass
• [PATCH 1/2] efi_loader: efi_setup: Add efi_start_obj_list() to efi_setup.c   Heinrich Schuchardt
• [PATCH 1/2] efi_loader: enable support for file renaming   Heinrich Schuchardt
• [PATCH 1/2] efi_stub: Sync the debug UART definition like other platform   Heinrich Schuchardt
• [PATCH 1/2] efi_stub: Sync the debug UART definition like other platform   Kever Yang
• [PATCH 1/2] rockchip: Add initial RK3582 support   Kever Yang
• [PATCH 1/2] spi: spi-uclass: Fix dm_spi_claim_bus()   Hironori KIKUCHI
• [PATCH 1/2] stm32mp: Fix board_get_usable_ram_top()   Patrice Chotard
• [PATCH 1/2] stm32mp: Fix board_get_usable_ram_top()   Patrice Chotard
• [PATCH 1/2] tools: mkimage: Add Amlogic Boot Image type   Jonas Karlman
• [PATCH 1/2] tools: mkimage: Add Amlogic Boot Image type   Ferass El Hafidi
• [PATCH 1/2] tools: mkimage: Add Amlogic Boot Image type   Neil Armstrong
• [PATCH 1/2] tools: mkimage: Add Amlogic Boot Image type   Tom Rini
• [PATCH 1/2] usb: ehci-mx5: Use regulator_set_enable_if_allowed   Marek Vasut
• [PATCH 1/2] usb: ehci-mx5: Use regulator_set_enable_if_allowed   Fabio Estevam
• [PATCH 1/2] usb: ehci-mx5: Use regulator_set_enable_if_allowed   Mattijs Korpershoek
• [PATCH 1/3] arm64: Add late jump to kernel board hook   Marek Vasut
• [PATCH 1/3] bootstd: Fix memleak on errors in bootmeth_setup_iter_order()   Sam Protsenko
• [PATCH 1/3] bootstd: Fix memleak on errors in bootmeth_setup_iter_order()   Heinrich Schuchardt
• [PATCH 1/3] lib: implement strnstr()   Heinrich Schuchardt
• [PATCH 1/3] lib: implement strnstr()   Jerome Forissier
• [PATCH 1/3] lib: implement strnstr()   Rasmus Villemoes
• [PATCH 1/3] lib: implement strnstr()   Jerome Forissier
• [PATCH 1/3] net: mediatek: split ethernet switch code from mtk_eth.c   Weijie Gao
• [PATCH 1/4] clk/qcom: Print more details about stuck GDSC   Alexey Minnekhanov
• [PATCH 1/4] clk/qcom: Print more details about stuck GDSC   Caleb Connolly
• [PATCH 1/4] efi_loader: implement a HOB list   Heinrich Schuchardt
• [PATCH 1/4] efi_loader: implement a HOB list   Ilias Apalodimas
• [PATCH 1/4] upl: Add a work-around for Tianocore images   Simon Glass
• [PATCH 1/5] arm64: dts: rockchip: enable PCIe on M.2 E key for Radxa ROCK 5A   Kever Yang
• [PATCH 1/7] arm64: dts: rockchip: Add FriendlyARM NanoPi R3S board   Kever Yang
• [PATCH 1/8] ARM: renesas: Rename board/renesas/rcar-common to board/renesas/common   Marek Vasut
• [PATCH 1/8] sandbox: Make USB controller as having active DMA   Simon Glass
• [PATCH 10/11] rockchip: rk3288-firefly: Fix slow Ethernet initializion   Kever Yang
• [PATCH 10/12] imx: imx8mq_evk: Enable dynamic settings to mmcdev and mmcroot   Peng Fan (OSS)
• [PATCH 10/12] imx: imx8mq_evk: Enable dynamic settings to mmcdev and mmcroot   Fabio Estevam
• [PATCH 10/12] rockchip: rk3399-gru: Use SDMA mode to read from eMMC   Kever Yang
• [PATCH 10/13] board: ti: am62px: evm: Enable cache for AM62p   Chintan Vankar
• [PATCH 10/13] board: ti: am62px: evm: Enable cache for AM62p   Roger Quadros
• [PATCH 10/15] soc: qcom: smem: add build infra   Simon Glass
• [PATCH 10/15] spl: Add a type for the jumper function   Simon Glass
• [PATCH 10/67] ofnode: Use 4K for a default tree-size   Simon Glass
• [PATCH 11/11] rockchip: rk3288-firefly: Change to use FIT   Kever Yang
• [PATCH 11/12] imx: imx8mq_evk: Switch to BOOTSTD   Peng Fan (OSS)
• [PATCH 11/12] rockchip: rk3399-gru: Include pinctrl and regulators in SPL   Kever Yang
• [PATCH 11/13] configs: am62p: Add configs for enabling ETHBOOT in R5SPL   Chintan Vankar
• [PATCH 11/15] mach-snapdragon: increase pre-relocation malloc size for smem   Simon Glass
• [PATCH 11/15] spl: Add support for a relocating jump to the next phase   Simon Glass
• [PATCH 11/67] ofnode: Indicate when out of space in a few places   Simon Glass
• [PATCH 12/12] imx: imx93-11x11-evk: drop duplicated nodes   Peng Fan (OSS)
• [PATCH 12/13] configs: am62p: Enable configs required for Ethboot   Chintan Vankar
• [PATCH 12/13] configs: am62p: Enable configs required for Ethboot   Bryan Brattlof
• [PATCH 12/15] mach-snapdragon: move memory parsing to its own file   Simon Glass
• [PATCH 12/15] spl: Plumb in the relocating loader   Simon Glass
• [PATCH 12/67] ofnode: Update of_add_subnode() to indicate name is alloced   Simon Glass
• [PATCH 13/13] arch: arm: dts: k3-am62p5-sk-u-boot: Add bootph-all property to necessary nodes   Chintan Vankar
• [PATCH 13/15] mach-snapdragon: support parsing memory map from SMEM   Simon Glass
• [PATCH 13/15] mach-snapdragon: support parsing memory map from SMEM   Stephan Gerhold
• [PATCH 13/15] vbe: Support loading an FDT with the relocating loader   Simon Glass
• [PATCH 13/67] boot: Rename fit_image_get_data()   Simon Glass
• [PATCH 13/67] boot: Rename fit_image_get_data()   Heinrich Schuchardt
• [PATCH 14/15] mach-snapdragon: fetch serial# from SMEM   Simon Glass
• [PATCH 14/15] mach-snapdragon: fetch serial# from SMEM   Caleb Connolly
• [PATCH 14/15] vbe: Support loading SPL images   Simon Glass
• [PATCH 14/67] boot: Rename fit_image_get_data_and_size()   Simon Glass
• [PATCH 15/15] qcom_defconfig: enable QCOM_SMEM   Simon Glass
• [PATCH 15/15] vbe: Update simple-fw to support using the SPL loader   Simon Glass
• [PATCH 15/67] boot: Update fit_image_get_emb_data to use abuf   Simon Glass
• [PATCH 16/67] boot: Use fit_image_get_data() to get data   Simon Glass
• [PATCH 17/67] boot: Update fit_image_get_data() to use abuf   Simon Glass
• [PATCH 18/67] test: Fix inpected typo in upl test   Simon Glass
• [PATCH 19/67] emulation: fdt: Relax condition for OF_HAS_PRIOR_STAGE   Simon Glass
• [PATCH 2/2] ARM: dts: stm32: Update ck_flexgen_08 frequency.   Patrice Chotard
• [PATCH 2/2] ARM: dts: stm32: Update ck_flexgen_08 frequency.   Patrice Chotard
• [PATCH 2/2] arm: dts: Update nand node for bcmbca board dts   David Regan
• [PATCH 2/2] board: mediatek: mt7629: Migrate to OF_UPSTREAM   Weijie Gao
• [PATCH 2/2] bootstd: android: Allow boot with AVB failures when unlocked   Mattijs Korpershoek
• [PATCH 2/2] bootstd: android: Allow boot with AVB failures when unlocked   Mattijs Korpershoek
• [PATCH 2/2] config: efi-x86_payload: Enable DEBUG_UART   Heinrich Schuchardt
• [PATCH 2/2] config: efi-x86_payload: Enable DEBUG_UART   Heinrich Schuchardt
• [PATCH 2/2] config: efi-x86_payload: Enable DEBUG_UART   Simon Glass
• [PATCH 2/2] config: efi-x86_payload: Enable DEBUG_UART   Heinrich Schuchardt
• [PATCH 2/2] config: efi-x86_payload: Enable DEBUG_UART   Kever Yang
• [PATCH 2/2] config: efi-x86_payload: Enable DEBUG_UART   Simon Glass
• [PATCH 2/2] config: efi-x86_payload: Enable DEBUG_UART   Tom Rini
• [PATCH 2/2] configs: stm32f469-disco: Set CYCLIC_MAX_CPU_TIME_US to 50000 for stm32f469-disco   Patrick DELAUNAY
• [PATCH 2/2] cyclic: Fix typo in struct cyclic_info description   Patrice Chotard
• [PATCH 2/2] cyclic: Fix typo in struct cyclic_info description   Stefan Roese
• [PATCH 2/2] fs: fat: Implement FAT file rename   Heinrich Schuchardt
• [PATCH 2/2] spi: soft_spi: Add support for SPI_3WIRE   Hironori KIKUCHI
• [PATCH 2/2] tools: amlimage: Add support for GXBB eMMC header   Jonas Karlman
• [PATCH 2/2] tools: amlimage: Add support for GXBB eMMC header   Simon Glass
• [PATCH 2/2] tools: amlimage: Add support for GXBB eMMC header   Jonas Karlman
• [PATCH 2/2] tools: amlimage: Add support for GXBB eMMC header   Ferass El Hafidi
• [PATCH 2/2] tools: amlimage: Add support for GXBB eMMC header   Neil Armstrong
• [PATCH 2/2] tools: amlimage: Add support for GXBB eMMC header   Neil Armstrong
• [PATCH 2/2] tpm: get tpm event log from bloblist   Simon Glass
• [PATCH 2/2] tpm: get tpm event log from bloblist   Raymond Mao
• [PATCH 2/2] tpm: get tpm event log from bloblist   Tom Rini
• [PATCH 2/2] tpm: get tpm event log from bloblist   Tom Rini
• [PATCH 2/2] tpm: get tpm event log from bloblist   Raymond Mao
• [PATCH 2/2] tpm: get tpm event log from bloblist   Tom Rini
• [PATCH 2/2] tpm: get tpm event log from bloblist   Raymond Mao
• [PATCH 2/2] tpm: get tpm event log from bloblist   Simon Glass
• [PATCH 2/2] usb: ehci-mx6: Use regulator_set_enable_if_allowed   Marek Vasut
• [PATCH 2/2] usb: ehci-mx6: Use regulator_set_enable_if_allowed   Fabio Estevam
• [PATCH 2/2] usb: ehci-mx6: Use regulator_set_enable_if_allowed   Mattijs Korpershoek
• [PATCH 2/3] bootstd: Probe bootmeth devices for bootmeths env var   Sam Protsenko
• [PATCH 2/3] bootstd: Probe bootmeth devices for bootmeths env var   Heinrich Schuchardt
• [PATCH 2/3] image: Add support for starting TFA BL31 as fitImage loadables   Marek Vasut
• [PATCH 2/3] image: Add support for starting TFA BL31 as fitImage loadables   Biju Das
• [PATCH 2/3] image: Add support for starting TFA BL31 as fitImage loadables   Marek Vasut
• [PATCH 2/3] image: Add support for starting TFA BL31 as fitImage loadables   Biju Das
• [PATCH 2/3] net: mediatek: add support for MediaTek MT7987 SoC   Weijie Gao
• [PATCH 2/3] test: unit tests for strstr() and strnstr()   Heinrich Schuchardt
• [PATCH 2/3] test: unit tests for strstr() and strnstr()   Ilias Apalodimas
• [PATCH 2/4] clk/qcom: Treat different GDSCs didderently   Alexey Minnekhanov
• [PATCH 2/4] clk/qcom: Treat different GDSCs didderently   Caleb Connolly
• [PATCH 2/4] efi_loader: build with HII configuration protocol   Heinrich Schuchardt
• [PATCH 2/4] efi_loader: build with HII configuration protocol   Ilias Apalodimas
• [PATCH 2/4] upl: Correct handling of ISA serial   Simon Glass
• [PATCH 2/5] arm64: dts: rockchip: Split up RK3588's PCIe pinctrls   Kever Yang
• [PATCH 2/7] arm64: dts: rockchip: fix model name for FriendlyElec NanoPi R3S   Kever Yang
• [PATCH 2/8] ARM: renesas: Simplify board Makefiles   Marek Vasut
• [PATCH 2/8] efi_loader: Fix display of addresses in log   Simon Glass
• [PATCH 2/8] efi_loader: Fix display of addresses in log   Ilias Apalodimas
• [PATCH 2/8] efi_loader: Fix display of addresses in log   Simon Glass
• [PATCH 2/8] efi_loader: Fix display of addresses in log   Ilias Apalodimas
• [PATCH 2/8] efi_loader: Fix display of addresses in log   Simon Glass
• [PATCH 20/67] emulation: Use bloblist to hold tables   Simon Glass
• [PATCH 21/67] x86: Create more space for SPL with qemu-x86_64   Simon Glass
• [PATCH 22/67] upl: Create a function to create a memory node   Simon Glass
• [PATCH 23/67] upl: Update add_upl_memmap() to use write_mem_node()   Simon Glass
• [PATCH 24/67] upl: Update add_upl_memres() to use write_mem_node()   Simon Glass
• [PATCH 25/67] upl: Support writing a UPL only for testing   Simon Glass
• [PATCH 26/67] upl: Drop enum upl_serial_access_type   Simon Glass
• [PATCH 27/67] upl: Init serial and graphics alists in upl_init()   Simon Glass
• [PATCH 28/67] upl: Move serial and graphics addition-code to upl_common   Simon Glass
• [PATCH 29/67] pci: video: Set up the pixel-format field   Simon Glass
• [PATCH 3/3] arm64: renesas: Add TFA BL31 handoff support   Marek Vasut
• [PATCH 3/3] arm: mach-k3: am62p: Fixup a53 max cpu frequency by speed-grade   Aparna Patra
• [PATCH 3/3] bootstd: Fix incorrect struct name in bootmeth_setup_iter_order()   Sam Protsenko
• [PATCH 3/3] bootstd: Fix incorrect struct name in bootmeth_setup_iter_order()   Heinrich Schuchardt
• [PATCH 3/3] net: mediatek: add support for Airoha AN8855 ethernet switch   Weijie Gao
• [PATCH 3/3] net: use strnstr() for lwip_strnstr()   Heinrich Schuchardt
• [PATCH 3/3] net: use strnstr() for lwip_strnstr()   Jerome Forissier
• [PATCH 3/4] clk/qcom: Port to new GDSC flags   Alexey Minnekhanov
• [PATCH 3/4] efi_loader: install DXE services table   Heinrich Schuchardt
• [PATCH 3/4] efi_loader: install DXE services table   Ilias Apalodimas
• [PATCH 3/4] efi_loader: install DXE services table   Heinrich Schuchardt
• [PATCH 3/4] efi_loader: install DXE services table   Ilias Apalodimas
• [PATCH 3/4] x86: emulation: Enable bloblist   Simon Glass
• [PATCH 3/5] arm64: dts: rockchip: Add HDMI0 node to rk3588   Kever Yang
• [PATCH 3/7] arm64: dts: rockchip: replace deprecated snps,reset props for NanoPi R3S   Kever Yang
• [PATCH 3/8] ARM: renesas: Rename common/common.c to common/rcar64-common.c   Marek Vasut
• [PATCH 3/8] efi_loader: Return the memory map in pointer format   Simon Glass
• [PATCH 30/67] x86: Show an error if video fails   Simon Glass
• [PATCH 31/67] x86: Support jumping to a UPL image   Simon Glass
• [PATCH 32/67] x86: Enable UPL handoff for SPL   Simon Glass
• [PATCH 33/67] x86: Align the SMBIOS table to a 4K boundary   Simon Glass
• [PATCH 33/67] x86: Align the SMBIOS table to a 4K boundary   Heinrich Schuchardt
• [PATCH 34/67] upl: Require OFNODE_MULTI_TREE when writing a UPL handoff   Simon Glass
• [PATCH 35/67] upl: Drop the argument to spl_write_upl_handoff()   Simon Glass
• [PATCH 36/67] x86: emulation: Enable UPL   Simon Glass
• [PATCH 37/67] upl: Correct comment and condition in add_upl_memres()   Simon Glass
• [PATCH 38/67] upl: Add addr/size tags in the reserved-memory node   Simon Glass
• [PATCH 39/67] upl: Update upl_add_graphics() to return framebuffer   Simon Glass
• [PATCH 4/4] drivers: clk: qcom: Add SDM630/660 GCC driver   Alexey Minnekhanov
• [PATCH 4/4] drivers: clk: qcom: Add SDM630/660 GCC driver   Caleb Connolly
• [PATCH 4/4] efi_loader: print image load address in StartImage   Heinrich Schuchardt
• [PATCH 4/4] efi_loader: print image load address in StartImage   Ilias Apalodimas
• [PATCH 4/4] upl: Update documentation   Simon Glass
• [PATCH 4/5] arm64: dts: rockchip: add Radxa ROCK 5C   Kever Yang
• [PATCH 4/5] pxe_utils: Support a backup for localboot   Simon Glass
• [PATCH 4/5] pxe_utils: Support a backup for localboot   Tom Rini
• [PATCH 4/5] pxe_utils: Support a backup for localboot   Simon Glass
• [PATCH 4/7] arm64: dts: rockchip: sort props in pmu_io_domains node for NanoPi R3S   Kever Yang
• [PATCH 4/8] arm64: renesas: Drop unused code and clean up headers on R-Car D3 Draak   Marek Vasut
• [PATCH 4/8] efi_loader: Correct bounce-buffer setup   Simon Glass
• [PATCH 40/67] upl: Add a function to write a UPL handoff to an abuf   Simon Glass
• [PATCH 41/67] upl: Use a 64-bit value for a memregion base-address   Simon Glass
• [PATCH 42/67] upl: Set bit 32 of the address when using ISA   Simon Glass
• [PATCH 43/67] upl: Add RAM to the memory region   Simon Glass
• [PATCH 44/67] upl: Add a compatible string for the upl-params node   Simon Glass
• [PATCH 45/67] upl: Move buffer_addr_size() higher and rename   Simon Glass
• [PATCH 46/67] upl: Factor out part of encode_reg() to new function   Simon Glass
• [PATCH 47/67] upl: Move decode_addr_size() higher and rename   Simon Glass
• [PATCH 48/67] upl: Factor out part of decode_reg() to new function   Simon Glass
• [PATCH 49/67] upl: Correct name of upl-images   Simon Glass
• [PATCH 5/5] rockchip: Add support for Radxa ROCK 5C   Kever Yang
• [PATCH 5/7] arm64: dts: rockchip: enable eMMC HS200 mode for NanoPi R3S   Kever Yang
• [PATCH 5/8] arm64: renesas: Drop unused code and clean up headers on Salvator-X boards   Marek Vasut
• [PATCH 5/8] efi_loader: Check memory allocations in bootflow_efi test()   Simon Glass
• [PATCH 50/67] dm: core: Clarify behaviour of ofnode_name_eq()   Simon Glass
• [PATCH 51/67] dm: core: Allow ofnode_name_eq() to accept a unit address   Simon Glass
• [PATCH 52/67] dm: core: Rewrite ofnode_find_subnode() to use ofnode API   Simon Glass
• [PATCH 53/67] upl: test: Show the handoff FDT when debugging   Simon Glass
• [PATCH 54/67] upl: Use a reg property to specify the FIT address and size   Simon Glass
• [PATCH 55/67] upl: Update and tidy writing of images   Simon Glass
• [PATCH 56/67] upl: Make use of alist_for_each()   Simon Glass
• [PATCH 57/67] upl: Correct use of sizeof()   Simon Glass
• [PATCH 58/67] upl: Drop acpi_nvs_size   Simon Glass
• [PATCH 59/67] upl: Improve uniqueness of log_msg_ret() strings   Simon Glass
• [PATCH 6/7] arm64: dts: rockchip: reorder mmc aliases for NanoPi R3S   Kever Yang
• [PATCH 6/8] arm64: renesas: Drop unused code and clean up headers on ULCB boards   Marek Vasut
• [PATCH 6/8] efi_loader: Update testapp to get memory map correctly   Simon Glass
• [PATCH 60/67] upl: Add PCI information   Simon Glass
• [PATCH 61/67] upl: Handle serial on an ISA bus with /chosen node   Simon Glass
• [PATCH 62/67] upl: Add missing word in comment for upl_write_handoff()   Simon Glass
• [PATCH 63/67] upl: Add a command to execute a UPL payload   Simon Glass
• [PATCH 64/67] scripts: Update qemu script to use 64-bit on x86 always   Simon Glass
• [PATCH 65/67] scripts: Update qemu script to support specifying a UPL   Simon Glass
• [PATCH 66/67] upl: Add reserved memory for the ACPI and SMBIOS tables   Simon Glass
• [PATCH 67/67] upl: Add an 'addr' property for Tianocore   Simon Glass
• [PATCH 7/7] board: rockchip: add FriendlyElec NanoPi R3S   Kever Yang
• [PATCH 7/7] board: rockchip: add FriendlyElec NanoPi R3S   Kever Yang
• [PATCH 7/7] board: rockchip: add FriendlyElec NanoPi R3S   Tianling Shen
• [PATCH 7/8] arm64: renesas: Deduplicate board_early_init_f()   Marek Vasut
• [PATCH 7/8] arm64: renesas: Deduplicate board_early_init_f()   Adam Ford
• [PATCH 7/8] efi_loader: Check that the bootflow is not removed by app   Simon Glass
• [PATCH 8/8] arm64: renesas: Deduplicate R-Car Gen3 and Gen4 SPL   Marek Vasut
• [PATCH 8/8] efi_loader: Test that active-DMA devices are removed   Simon Glass
• [PATCH] arch: arm: mach-k3: Delete tifs node in DT fixup   Udit Kumar
• [PATCH] arch: arm: mach-k3: j784s4_init: Set CTRL_MMR for AUDIO_REFCLK1 clk_sel   Jayesh Choudhary
• [PATCH] arch: arm: mach-k3: j784s4_init: Set CTRL_MMR for AUDIO_REFCLK1 clk_sel   Andrew Davis
• [PATCH] arch: arm: mach-k3: j784s4_init: Set CTRL_MMR for AUDIO_REFCLK1 clk_sel   Jayesh Choudhary
• [PATCH] arm64: renesas: Rewrite u-boot-elf.srec base address if PIE for R-Car Gen3   Marek Vasut
• [PATCH] arm64: versal: RO multi_boot register in non JTAG bootmode   Michal Simek
• [PATCH] arm64: zynqmp: Add eeprom labels for System Controller dts   Michal Simek
• [PATCH] arm64: zynqmp: Enable iio-hwmon description only for SOM   Michal Simek
• [PATCH] arm: dts: k3-am62p-sk-binman: add SE security variant builds   Tom Rini
• [PATCH] arm: dts: k3-j721e-beagleboneai: Move to OF_UPSTREAM   Tom Rini
• [PATCH] ARM: dts: stm32mp13: Add support of ck_usbo_48m in pre-reloc stage   Patrick DELAUNAY
• [PATCH] armv8: mmu: don't switch to emergency tlb when adding a dynamic mapping   Caleb Connolly
• [PATCH] armv8: mmu: don't switch to emergency tlb when adding a dynamic mapping   Marc Zyngier
• [PATCH] armv8: mmu: don't switch to emergency tlb when adding a dynamic mapping   Caleb Connolly
• [PATCH] armv8: mmu: don't switch to emergency tlb when adding a dynamic mapping   Marc Zyngier
• [PATCH] armv8: mmu: don't switch to emergency tlb when adding a dynamic mapping   Pierre-Clément Tosi
• [PATCH] armv8: mmu: don't switch to emergency tlb when adding a dynamic mapping   Caleb Connolly
• [PATCH] armv8: mmu: don't switch to emergency tlb when adding a dynamic mapping   Neil Armstrong
• [PATCH] binman: Fill in most of the imx8mimage and imx8mcst tests   Marek Vasut
• [PATCH] binman: Fill in most of the imx8mimage and imx8mcst tests   Simon Glass
• [PATCH] binman: Fill in most of the imx8mimage and imx8mcst tests   Marek Vasut
• [PATCH] binman: Fill in most of the imx8mimage and imx8mcst tests   Simon Glass
• [PATCH] binman: Fill in most of the imx8mimage and imx8mcst tests   Marek Vasut
• [PATCH] binman: Fill in most of the imx8mimage and imx8mcst tests   Simon Glass
• [PATCH] binman: Fill in most of the imx8mimage and imx8mcst tests   Fabio Estevam
• [PATCH] Bitbanging MDIO driver for DM framework.   Tom Rini
• [PATCH] bloblist: Drop BSD license   Simon Glass
• [PATCH] bloblist: Drop BSD license   Tom Rini
• [PATCH] bloblist: Drop BSD license   Ilias Apalodimas
• [PATCH] bloblist: Drop BSD license   Simon Glass
• [PATCH] bloblist: Drop BSD license   Simon Glass
• [PATCH] board: amlogic: odroid-n2: remove amlogic prefix from fdtdir path   Christian Hewitt
• [PATCH] board: amlogic: odroid-n2: remove amlogic prefix from fdtdir path   Christian Hewitt
• [PATCH] board: ti: j722s: j722s.env: Set remoteproc firmware names   Beleswar Padhi
• [PATCH] board: ti: j722s: j722s.env: Set remoteproc firmware names   Bryan Brattlof
• [PATCH] board: ti: j722s: j722s.env: Set remoteproc firmware names   Beleswar Prasad Padhi
• [PATCH] board: ti: j722s: j722s.env: Set remoteproc firmware names   Bryan Brattlof
• [PATCH] board: xilinx: Add missing prototype for set_dfu_alt_info   Venkatesh Yadav Abbarapu
• [PATCH] board: xilinx: Add missing prototype for set_dfu_alt_info   Michal Simek
• [PATCH] boot: android: Check kcmdline's for NULL in android_image_get_kernel()   Mattijs Korpershoek
• [PATCH] boot: android: Check kcmdline's for NULL in android_image_get_kernel()   Nicolas Belin
• [PATCH] clk: sophgo: Use clock ID translation for cv1800b   Alexey Karyakin
• [PATCH] configs: am62x_evm_*: Set DFU buffer size to 256k   Roger Quadros
• [PATCH] doc: coolpi: Fix the defconfig name   Andy Yan
• [PATCH] drivers: firmware: ti_sci: Add DM_FLAG_PRE_RELOC to driver   Tom Rini
• [PATCH] efi: Correct ECPT table GUID   Yang Gang
• [PATCH] efi: Correct ECPT table GUID   Yang Gang
• [PATCH] efi: Correct ECPT table GUID   Heinrich Schuchardt
• [PATCH] efi_loader: Fix section alignment on EFI binaries   Heinrich Schuchardt
• [PATCH] efi_loader: Fix section alignment on EFI binaries   Ilias Apalodimas
• [PATCH] Fix neighbor discovery ethernet address saving   Tom Rini
• [PATCH] Kconfig: Add a default cache line size for RISC-V   Yu-Chien Peter Lin
• [PATCH] Kconfig: Add a default cache line size for RISC-V   Heinrich Schuchardt
• [PATCH] MAINTAINERS: move myself to reviewers for avb/ab   Igor Opaniuk
• [PATCH] MAINTAINERS: move myself to reviewers for avb/ab   Mattijs Korpershoek
• [PATCH] Makefile: Make sure all linker input objects exist   Marek Vasut
• [PATCH] net/netcat: add netcat over tcp support   Mikhail Kshevetskiy
• [PATCH] net/netcat: add netcat over tcp support   Heinrich Schuchardt
• [PATCH] net: tftpput: reset timeout_count when an ACK is received   Tom Rini
• [PATCH] pinctrl: rockchip: rk3328: Fix pinmux for GPIO2-B and GPIO3-B pins   Jonas Karlman
• [PATCH] power: pmic: tps65941: Fix TI TPS65224 PMIC compatiable   Jaehoon Chung
• [PATCH] qconfig.py: Update resync message   Tom Rini
• [PATCH] qconfig.py: Update resync message   Simon Glass
• [PATCH] riscv: spacemit: k1: probe dram size during boot phase.   Huan Zhou
• [PATCH] riscv: spacemit: k1: probe dram size during boot phase.   Yixun Lan
• [PATCH] riscv: spacemit: k1: probe dram size during boot phase.   Heinrich Schuchardt
• [PATCH] riscv: spacemit: k1: probe dram size during boot phase.   Huan Zhou
• [PATCH] riscv: spacemit: k1: probe dram size during boot phase.   Huan Zhou
• [PATCH] riscv: spacemit: k1: probe dram size during boot phase.   Huan Zhou
• [PATCH] riscv: spacemit: k1: probe dram size during boot phase.   Dan Carpenter
• [PATCH] riscv: spacemit: k1: probe dram size during boot phase.   Huan Zhou
• [PATCH] riscv: spacemit: k1: probe dram size during boot phase.   Simon Glass
• [PATCH] riscv: spacemit: k1: probe dram size during boot phase.   Tom Rini
• [PATCH] riscv: spacemit: k1: probe dram size during boot phase.   Dan Carpenter
• [PATCH] riscv: spacemit: k1: probe dram size during boot phase.   Simon Glass
• [PATCH] riscv: spacemit: k1: probe dram size during boot phase.   Marcel Ziswiler
• [PATCH] rockchip: rk3308-rock-s0: Fix SD-card boot on v1.1 hw revision   Kever Yang
• [PATCH] rockchip: rk3308-rock-s0: Fix SD-card boot on v1.1 hw revision   Kever Yang
• [PATCH] rockchip: rk3399: expand space for decompressed kernel   Kever Yang
• [PATCH] rockchip: rk3588-nanopc-t6-lts: Add missing board -u-boot.dtsi   Jonas Karlman
• [PATCH] rockchip: rk3588-nanopc-t6-lts: Add missing board -u-boot.dtsi   Kever Yang
• [PATCH] rpi: Add identifiers for the new RPi 5 series   Matthias Brugger
• [PATCH] rpi: Add identifiers for the new RPi 5 series   Simon Glass
• [PATCH] rtc: zynqmp: allow on Versal architectures   Vincent Fazio
• [PATCH] sandbox: Adjust configuration to hang on panic()   Heinrich Schuchardt
• [PATCH] sandbox: Adjust configuration to hang on panic()   Simon Glass
• [PATCH] spi: cadence_qspi: Fix OSPI DDR mode alignment issue   Padmarao Begari
• [PATCH] trace: proftool: dump-ftrace should write funcgraph times in ns not us   Tom Rini
• [PATCH] usb: dwc3-generic: Fix build errors when USB_DWC3_GADGET is disabled   Marek Vasut
• [PATCH] usb: dwc3-generic: Fix build errors when USB_DWC3_GADGET is disabled   Mattijs Korpershoek
• [PATCH] usb: dwc3-generic: Fix build errors when USB_DWC3_GADGET is disabled   Jonas Karlman
• [PATCH] usb: dwc3-generic: Fix build errors when USB_DWC3_GADGET is disabled   Marek Vasut
• [PATCH] usb: dwc3-of-simple: Remove Amlogic and Rockchip compatible   Mattijs Korpershoek
• [PATCH] usb: dwc3-of-simple: Remove Amlogic and Rockchip compatible   neil.armstrong at linaro.org
• [PATCH] usb: ehci-mx6: Add i.MX95 support   Marek Vasut
• [PATCH] usb: ehci-mx6: Add i.MX95 support   Fabio Estevam
• [PATCH] usb: ehci-mx6: Add i.MX95 support   Marek Vasut
• [PATCH] usb: ehci-mx6: Add i.MX95 support   Fabio Estevam
• [PATCH] watchdog: rti: support SPL (or re-start)   Stefan Roese
• [PATCH] watchdog: rti: support SPL (or re-start)   Stefan Roese
• [PATCH] xilinx: Sort OF_LIST and add missing vpk120 and zcu670 platforms   Michal Simek
• [PATCH] zynqmp: Remove usb init initialization for Kria   Michal Simek
• [PATCH RESEND 0/7] Enable MMC UHS modes   Tom Rini
• [PATCH RFC 12/14] pinctrl: qcom: Add X1E80100 pinctrl driver   Alexey Minnekhanov
• [PATCH RFC v2 0/8] Introduce J742S2 SoC and EVM   Manorit Chawdhry
• [PATCH RFC v2 1/8] tools: binman: control.py: Delete template nodes after parsing   Manorit Chawdhry
• [PATCH RFC v2 2/8] arm: dts: k3-j784s4-binman.dtsi: Clean up and templatize boot binaries   Manorit Chawdhry
• [PATCH RFC v2 3/8] arm: dts: k3-j784s4-ddr: Refactor J784s4 ddr file to a common file   Manorit Chawdhry
• [PATCH RFC v2 4/8] soc: Add information to identify the J742S2 SoC family   Manorit Chawdhry
• [PATCH RFC v2 5/8] arm: mach-k3: j742s2: Introduce clock and device files for J742S2 SoC   Manorit Chawdhry
• [PATCH RFC v2 6/8] board: ti: Introduce basic board files for the J742S2 family   Manorit Chawdhry
• [PATCH RFC v2 7/8] arm: dts: Introduce J742S2 U-boot DTS files   Manorit Chawdhry
• [PATCH RFC v2 8/8] configs: Introduce configs for J742S2   Manorit Chawdhry
• [PATCH v1 0/2] Risc-V ISA Extension Probing   Mayuresh Chitale
• [PATCH v1 0/2] Risc-V ISA Extension Probing   Simon Glass
• [PATCH v1 0/5] Enable QCOM QCS9100 Ride platform support   Varadarajan Narayanan
• [PATCH v1 1/1] board: zynqmp: zynqmp-sm-k26-revA: release DP from reset   Michal Simek
• [PATCH v1 1/2] net: phy: Add driver for Motorcomm YT8531S Gigabit ethernet phy   Tom Rini
• [PATCH v1 1/2] net: phy: Add driver for Motorcomm YT8531S Gigabit ethernet phy   Tom Rini
• [PATCH v1 1/2] riscv: Enhance extension probing   Mayuresh Chitale
• [PATCH v1 1/5] dts: sa8775p-ride-r3-u-boot: add override dtsi   Varadarajan Narayanan
• [PATCH v1 1/5] dts: sa8775p-ride-r3-u-boot: add override dtsi   neil.armstrong at linaro.org
• [PATCH v1 1/5] dts: sa8775p-ride-r3-u-boot: add override dtsi   Varadarajan Narayanan
• [PATCH v1 1/5] dts: sa8775p-ride-r3-u-boot: add override dtsi   Caleb Connolly
• [PATCH v1 1/5] dts: sa8775p-ride-r3-u-boot: add override dtsi   Varadarajan Narayanan
• [PATCH v1 1/5] dts: sa8775p-ride-r3-u-boot: add override dtsi   Caleb Connolly
• [PATCH v1 1/5] dts: sa8775p-ride-r3-u-boot: add override dtsi   Sumit Garg
• [PATCH v1 1/5] dts: sa8775p-ride-r3-u-boot: add override dtsi   Caleb Connolly
• [PATCH v1 1/5] dts: sa8775p-ride-r3-u-boot: add override dtsi   Varadarajan Narayanan
• [PATCH v1 1/6] fastboot: Fix warning when CONFIG_SYS_64BIT_LBA is enable   Patrick DELAUNAY
• [PATCH v1 2/2] riscv: Fallback to riscv,isa   Mayuresh Chitale
• [PATCH v1 2/5] clk/qcom: add initial clock driver for qcs9100   Varadarajan Narayanan
• [PATCH v1 2/5] clk/qcom: add initial clock driver for qcs9100   neil.armstrong at linaro.org
• [PATCH v1 2/6] arm: stm32mp: stm32prog: fix warning when CONFIG_SYS_64BIT_LBA is enable   Patrick DELAUNAY
• [PATCH v1 3/5] phy: qcom: Add SA8775 to QMP UFS PHY driver   Varadarajan Narayanan
• [PATCH v1 3/5] phy: qcom: Add SA8775 to QMP UFS PHY driver   neil.armstrong at linaro.org
• [PATCH v1 3/5] phy: qcom: Add SA8775 to QMP UFS PHY driver   Caleb Connolly
• [PATCH v1 3/6] arm: stm32mp: stm32prog: update multiplier is part-size is above SZ_1G   Patrick DELAUNAY
• [PATCH v1 4/5] qcom_defconfig: enable SA8775P clock driver   Varadarajan Narayanan
• [PATCH v1 4/5] qcom_defconfig: enable SA8775P clock driver   neil.armstrong at linaro.org
• [PATCH v1 4/6] configs: stm32mp13: enable CONFIG_SYS_64BIT_LBA   Patrick DELAUNAY
• [PATCH v1 5/5] configs: add qcs9100_defconfig   Varadarajan Narayanan
• [PATCH v1 5/6] configs: stm32mp15: enable CONFIG_SYS_64BIT_LBA   Patrick DELAUNAY
• [PATCH v1 6/6] configs: stm32mp25: enable CONFIG_SYS_64BIT_LBA   Patrick DELAUNAY
• [PATCH v1 6/6] configs: stm32mp25: enable CONFIG_SYS_64BIT_LBA   Heinrich Schuchardt
• [PATCH v1] arm: dts: rockchip: add rk3318 A95X Z2 board   Kever Yang
• [PATCH v1] riscv: dts: starfive: split out visionfive2 target specific configuration   E Shattow
• [PATCH v1] rockchip: rk3066a/rk3188: use includes from dts/upstream   Kever Yang
• [PATCH v1] rockchip: use OF_UPSTREAM for rk3036   Kever Yang
• [PATCH v1] rockchip: use OF_UPSTREAM for rk3036   Kever Yang
• [PATCH v1] rockchip: use OF_UPSTREAM for rk3066a/rk3188   Kever Yang
• [PATCH v1] usb: dwc3: core: Fix timeout check   Varadarajan Narayanan
• [PATCH v1] usb: dwc3: core: Fix timeout check   neil.armstrong at linaro.org
• [PATCH v1] usb: dwc3: core: Fix timeout check   Marek Vasut
• [PATCH v1] usb: dwc3: core: Fix timeout check   Varadarajan Narayanan
• [PATCH v1] usb: dwc3: core: Fix timeout check   Marek Vasut
• [PATCH v2 0/1] SoCFPGA: Add watchdog mode setting for Agilex 5   muhammad.hazim.izzat.zamri at intel.com
• [PATCH v2 0/1] SoCFPGA: Add watchdog mode setting for Agilex 5   muhammad.hazim.izzat.zamri at intel.com
• [PATCH v2 0/2] bootstd: android: Allow booting with AVB failures when unlocked   Mattijs Korpershoek
• [PATCH v2 0/3] Add 'trace wipe'   Tom Rini
• [PATCH v2 0/3] Initial support for PXA1908 and samsung-coreprimevelte   Duje Mihanović
• [PATCH v2 0/3] Initial support for PXA1908 and samsung-coreprimevelte   Stefan Roese
• [PATCH v2 0/4] Add fdt-fixups for AM62P variants   Aparna Patra
• [PATCH v2 0/4] Add fdt-fixups for AM62P variants   Bryan Brattlof
• [PATCH v2 0/4] Fix OSPI boot for J722S   Tom Rini
• [PATCH v2 0/5] Static initcalls   Tom Rini
• [PATCH v2 0/5] Static initcalls   Simon Glass
• [PATCH v2 0/5] Static initcalls   Jerome Forissier
• [PATCH v2 0/5] Static initcalls   Jerome Forissier
• [PATCH v2 0/6] Enable QCOM QCS9100 Ride platform support   Varadarajan Narayanan
• [PATCH v2 00/16] imx9: switch to bootstd for i.MX93/1 EVK/QSB and i.MX8M EVK   Peng Fan (OSS)
• [PATCH v2 00/33] upl: Prerequite patches for updated spec   Simon Glass
• [PATCH v2 00/33] upl: Prerequite patches for updated spec   Tom Rini
• [PATCH v2 00/33] upl: Prerequite patches for updated spec   Tom Rini
• [PATCH v2 00/33] upl: Prerequite patches for updated spec   Simon Glass
• [PATCH v2 01/16] imx: imx93_evk: switch to BOOTSTD   Peng Fan (OSS)
• [PATCH v2 01/33] bloblist: add api to get blob with size   Simon Glass
• [PATCH v2 02/16] imx: imx93_qsb: switch to BOOTSTD   Peng Fan (OSS)
• [PATCH v2 02/33] bloblist: Drop BSD license   Simon Glass
• [PATCH v2 02/33] bloblist: Drop BSD license   Ilias Apalodimas
• [PATCH v2 02/33] bloblist: Drop BSD license   Simon Glass
• [PATCH v2 03/16] imx: imx91_evk: switch to BOOTSTD   Peng Fan (OSS)
• [PATCH v2 03/33] bloblist: Make BLOBLIST_ALLOC the default   Simon Glass
• [PATCH v2 03/33] bloblist: Make BLOBLIST_ALLOC the default   Tom Rini
• [PATCH v2 03/33] bloblist: Make BLOBLIST_ALLOC the default   Simon Glass
• [PATCH v2 03/33] bloblist: Make BLOBLIST_ALLOC the default   Tom Rini
• [PATCH v2 03/33] bloblist: Make BLOBLIST_ALLOC the default   Simon Glass
• [PATCH v2 04/16] imx: imx8mp_evk: Enable dynamic settings to mmcdev and mmcroot   Peng Fan (OSS)
• [PATCH v2 04/33] abuf: Provide a way to get the buffer address   Simon Glass
• [PATCH v2 05/16] imx: imx8mp_evk: Switch to BOOTSTD   Peng Fan (OSS)
• [PATCH v2 05/33] abuf: Allow use in host tools   Simon Glass
• [PATCH v2 06/16] imx: imx8mn_evk: Cleanup headers   Peng Fan (OSS)
• [PATCH v2 06/33] abuf: Provide a constant buffer   Simon Glass
• [PATCH v2 07/16] imx: imx8mn_evk: Drop DECLARE_GLOBAL_DATA_PTR   Peng Fan (OSS)
• [PATCH v2 07/33] cpu: Provide a way to get the physical-address size   Simon Glass
• [PATCH v2 08/16] imx: imx8mn_evk: Enable dynamic settings to mmcdev and mmcroot   Peng Fan (OSS)
• [PATCH v2 08/33] serial: Support info() method in ns16550 xPL with UPL   Simon Glass
• [PATCH v2 09/16] imx: imx8mn_evk: Switch to BOOTSTD   Peng Fan (OSS)
• [PATCH v2 09/33] mkimage: Update map_to_sysmem() to match its prototype   Simon Glass
• [PATCH v2 1/1] arm: socfpga:agilex5: Fix system manager watchdog mode setting   muhammad.hazim.izzat.zamri at intel.com
• [PATCH v2 1/1] arm: socfpga:agilex5: Fix system manager watchdog mode setting   muhammad.hazim.izzat.zamri at intel.com
• [PATCH v2 1/1] cmd/setexpr: support concatenation of direct strings   Heinrich Schuchardt
• [PATCH v2 1/2] bloblist: add api to get blob with size   Raymond Mao
• [PATCH v2 1/2] bloblist: add api to get blob with size   Simon Glass
• [PATCH v2 1/2] bloblist: add api to get blob with size   Ilias Apalodimas
• [PATCH v2 1/2] bootstd: android: Add missing NULL in the avb partition list   Mattijs Korpershoek
• [PATCH v2 1/3] arm64: Convert core type check macros into inline functions   Marek Vasut
• [PATCH v2 1/3] serial: ns16550: Add Intel XScale support   Stefan Roese
• [PATCH v2 1/3] serial: ns16550: Add Intel XScale support   Duje Mihanović
• [PATCH v2 1/3] serial: ns16550: Add Intel XScale support   Stefan Roese
• [PATCH v2 1/3] serial: ns16550: Add Intel XScale support   Duje Mihanović
• [PATCH v2 1/3] serial: ns16550: Add Intel XScale support   Stefan Roese
• [PATCH v2 1/4] arm: mach-k3: am62p: Fixup CPU core, CAN-FD and Video-codec nodes in fdt   Aparna Patra
• [PATCH v2 1/6] arm64: dts: qcom: qcs9100: Add support for the QCS9100 Ride and Ride Rev3 boards   Varadarajan Narayanan
• [PATCH v2 1/6] arm64: dts: qcom: qcs9100: Add support for the QCS9100 Ride and Ride Rev3 boards   Sumit Garg
• [PATCH v2 10/16] imx: imx8mm_evk: Enable dynamic settings to mmcdev and mmcroot   Peng Fan (OSS)
• [PATCH v2 10/33] x86: Enable meminfo command   Simon Glass
• [PATCH v2 11/16] imx: imx8mm_evk: Switch to BOOTSTD   Peng Fan (OSS)
• [PATCH v2 11/33] x86: Show the timestamp counter with bdinfo   Simon Glass
• [PATCH v2 12/16] imx: imx8mq_evk: Cleanup headers   Peng Fan (OSS)
• [PATCH v2 12/33] ofnode: Use 4K for a default tree-size   Simon Glass
• [PATCH v2 12/33] ofnode: Use 4K for a default tree-size   Tom Rini
• [PATCH v2 12/33] ofnode: Use 4K for a default tree-size   Simon Glass
• [PATCH v2 13/16] imx: imx8mq_evk: Drop DECLARE_GLOBAL_DATA_PTR   Peng Fan (OSS)
• [PATCH v2 13/33] ofnode: Indicate when out of space in a few places   Simon Glass
• [PATCH v2 13/33] ofnode: Indicate when out of space in a few places   Tom Rini
• [PATCH v2 14/16] imx: imx8mq_evk: Enable dynamic settings to mmcdev and mmcroot   Peng Fan (OSS)
• [PATCH v2 14/33] ofnode: Update of_add_subnode() to indicate name is alloced   Simon Glass
• [PATCH v2 15/16] imx: imx8mq_evk: Switch to BOOTSTD   Peng Fan (OSS)
• [PATCH v2 15/33] boot: Rename fit_image_get_data()   Simon Glass
• [PATCH v2 16/16] imx: imx93-11x11-evk: drop duplicated nodes   Peng Fan (OSS)
• [PATCH v2 16/16] imx: imx93-11x11-evk: drop duplicated nodes   Fabio Estevam
• [PATCH v2 16/16] imx: imx93-11x11-evk: drop duplicated nodes   Peng Fan
• [PATCH v2 16/16] imx: imx93-11x11-evk: drop duplicated nodes   Fabio Estevam
• [PATCH v2 16/17] imx95_evk: add i.MX95 19x19 EVK board basic support   Tim Harvey
• [PATCH v2 16/33] boot: Rename fit_image_get_data_and_size()   Simon Glass
• [PATCH v2 17/33] boot: Update fit_image_get_emb_data to use abuf   Simon Glass
• [PATCH v2 17/33] boot: Update fit_image_get_emb_data to use abuf   Tom Rini
• [PATCH v2 17/33] boot: Update fit_image_get_emb_data to use abuf   Simon Glass
• [PATCH v2 17/33] boot: Update fit_image_get_emb_data to use abuf   Tom Rini
• [PATCH v2 17/33] boot: Update fit_image_get_emb_data to use abuf   Simon Glass
• [PATCH v2 17/33] boot: Update fit_image_get_emb_data to use abuf   Tom Rini
• [PATCH v2 17/33] boot: Update fit_image_get_emb_data to use abuf   Simon Glass
• [PATCH v2 17/33] boot: Update fit_image_get_emb_data to use abuf   Tom Rini
• [PATCH v2 17/33] boot: Update fit_image_get_emb_data to use abuf   Simon Glass
• [PATCH v2 17/33] boot: Update fit_image_get_emb_data to use abuf   Tom Rini
• [PATCH v2 18/33] boot: Use fit_image_get_data() to get data   Simon Glass
• [PATCH v2 19/33] boot: Update fit_image_get_data() to use abuf   Simon Glass
• [PATCH v2 2/2] bootstd: android: Allow boot with AVB failures when unlocked   Mattijs Korpershoek
• [PATCH v2 2/2] efi_loader: efi_net: let efi_net_set_dp properly update the device path   Heinrich Schuchardt
• [PATCH v2 2/2] tpm: get tpm event log from bloblist   Raymond Mao
• [PATCH v2 2/2] tpm: get tpm event log from bloblist   Simon Glass
• [PATCH v2 2/2] tpm: get tpm event log from bloblist   Ilias Apalodimas
• [PATCH v2 2/3] arm64: Add MIDR entries for Cortex-A57 and Cortex-A76   Marek Vasut
• [PATCH v2 2/4] arm: mach-k3: am62p: Fixup thermal zone critical points   Aparna Patra
• [PATCH v2 2/4] rockchip: clk: rk3288: Drop use of SCLK_MAC_PLL   Kever Yang
• [PATCH v2 2/6] dts: qcs9100-ride-r3-u-boot: add override dtsi   Varadarajan Narayanan
• [PATCH v2 20/33] test: Fix inpected typo in upl test   Simon Glass
• [PATCH v2 21/33] emulation: fdt: Relax condition for OF_HAS_PRIOR_STAGE   Simon Glass
• [PATCH v2 21/33] emulation: fdt: Relax condition for OF_HAS_PRIOR_STAGE   Tom Rini
• [PATCH v2 21/33] emulation: fdt: Relax condition for OF_HAS_PRIOR_STAGE   Simon Glass
• [PATCH v2 21/33] emulation: fdt: Relax condition for OF_HAS_PRIOR_STAGE   Tom Rini
• [PATCH v2 21/33] emulation: fdt: Relax condition for OF_HAS_PRIOR_STAGE   Simon Glass
• [PATCH v2 22/33] emulation: Use bloblist to hold tables   Simon Glass
• [PATCH v2 22/33] emulation: Use bloblist to hold tables   Tom Rini
• [PATCH v2 23/33] x86: Create more space for SPL with qemu-x86_64   Simon Glass
• [PATCH v2 24/33] pci: video: Set up the pixel-format field   Simon Glass
• [PATCH v2 25/33] x86: Show an error if video fails   Simon Glass
• [PATCH v2 26/33] x86: Support jumping to a UPL image   Simon Glass
• [PATCH v2 27/33] x86: Enable UPL handoff for SPL   Simon Glass
• [PATCH v2 28/33] x86: Move tables to use SZ macros   Simon Glass
• [PATCH v2 29/33] x86: Align the SMBIOS table to a 4K boundary   Simon Glass
• [PATCH v2 3/3] arm64: renesas: Convert boards over to is_cortex_a() functions   Marek Vasut
• [PATCH v2 3/4] arm: mach-k3: am62p: Fixup a53 max cpu frequency by speed-grade   Aparna Patra
• [PATCH v2 3/6] clk/qcom: add initial clock driver for qcs9100   Varadarajan Narayanan
• [PATCH v2 30/33] x86: emulation: Enable bloblist   Simon Glass
• [PATCH v2 31/33] dm: core: Clarify behaviour of ofnode_name_eq()   Simon Glass
• [PATCH v2 32/33] dm: core: Provide ofnode_name_eq_unit() to accept a unit address   Simon Glass
• [PATCH v2 33/33] dm: core: Provide ofnode_find_subnode_unit()   Simon Glass
• [PATCH v2 4/4] arm: mach-k3: am62p: Set a53 cpu freq based on speed-grade   Aparna Patra
• [PATCH v2 4/4] efi: add helper functions to insert pmem node for DT fixup   Heinrich Schuchardt
• [PATCH v2 4/4] efi: add helper functions to insert pmem node for DT fixup   Sughosh Ganu
• [PATCH v2 4/6] phy: qcom: Add SA8775 to QMP UFS PHY driver   Varadarajan Narayanan
• [PATCH v2 4/8] usb: dwc2: Clean up with bitfield macros   Liu Jude
• [PATCH v2 5/6] cmd: bootmenu: add parameter -e for UEFI boot options   Tom Rini
• [PATCH v2 5/6] cmd: bootmenu: add parameter -e for UEFI boot options   Heinrich Schuchardt
• [PATCH v2 5/6] cmd: bootmenu: add parameter -e for UEFI boot options   Tom Rini
• [PATCH v2 5/6] cmd: bootmenu: add parameter -e for UEFI boot options   Simon Glass
• [PATCH v2 5/6] cmd: bootmenu: add parameter -e for UEFI boot options   Heinrich Schuchardt
• [PATCH v2 5/6] cmd: bootmenu: add parameter -e for UEFI boot options   Tom Rini
• [PATCH v2 5/6] qcom_defconfig: enable SA8775P clock driver   Varadarajan Narayanan
• [PATCH v2 6/6] configs: add qcs9100_defconfig   Varadarajan Narayanan
• [PATCH v2 6/6] configs: add qcs9100_defconfig   Sumit Garg
• [PATCH v2 7/8] usb: dwc2: Unify flush and reset logic with v4.20a support   Liu Jude
• [PATCH v2] arm64: dts: renesas: Deduplicate extalr_clk bootph-all   Marek Vasut
• [PATCH v2] board: odroid-n2: Update docs for signing   Baltazár Radics
• [PATCH v2] board: odroid-n2: Update docs for signing   Neil Armstrong
• [PATCH v2] board: rockchip: add Khadas Edge2 RK3588 board   Kever Yang
• [PATCH v2] board: rockchip: add Khadas Edge2 RK3588 board   Jacobe Zang
• [PATCH v2] board: xilinx: Add missing prototype for set_dfu_alt_info   Venkatesh Yadav Abbarapu
• [PATCH v2] config: xilinx: Enable the SPI_STACKED_PARALLEL config option   Venkatesh Yadav Abbarapu
• [PATCH v2] config: xilinx: Enable the SPI_STACKED_PARALLEL config option   Michal Simek
• [PATCH v2] dma: ti: k3-udma: Fix BCDMA probe by adding check for MMR_RFLOW   Tom Rini
• [PATCH v2] net: tftpboot: clear timeout_count on every successful block   Mikhail Kshevetskiy
• [PATCH v2] net: tftpboot: clear timeout_count on every successful block   Tom Rini
• [PATCHv2] Revert "net: phy: marvell 88e151x: Fix handling of bare RGMII interface type"   Tom Rini
• [PATCH v2] rockchip: rk3308-rock-s0: Fix SD-card boot on v1.1 hw revision   Jonas Karlman
• [PATCH v2] rockchip: use OF_UPSTREAM for rk3036   Johan Jonker
• [PATCH v2] rockchip: use OF_UPSTREAM for rk3066a/rk3188   Kever Yang
• [PATCH v2] watchdog: rti: drop hack manipulating WDT clock rate   Stefan Roese
• [PATCH v2] watchdog: rti: drop hack manipulating WDT clock rate   Stefan Roese
• [PATCH v3 0/5] Static initcalls   Jerome Forissier
• [PATCH v3 0/6] Enable QCOM QCS9100 Ride platform support   Varadarajan Narayanan
• [PATCH v3 0/6] imx8(m): add optee node to binman FIT image   Yannic Moog
• [PATCH v3 0/7] efi: Start to chip away at the EFI workaround   Simon Glass
• [PATCH v3 0/8] usb: dwc2: Refactor and update USB DWC2 driver   Junhui Liu
• [PATCH v3 0/8] usb: dwc2: Refactor and update USB DWC2 driver   Mattijs Korpershoek
• [PATCH v3 0/8] usb: dwc2: Refactor and update USB DWC2 driver   Junhui Liu
• [PATCH v3 00/13] Add imx8mp video support   Miquel Raynal
• [PATCH v3 00/17] imx9: switch to bootstd for i.MX93/1 EVK/QSB and i.MX8M EVK   Peng Fan (OSS)
• [PATCH v3 00/17] imx: add i.MX95 support   Alice Guo
• [PATCH v3 00/30] upl: Prerequite patches for updated spec   Simon Glass
• [PATCH v3 01/13] dm: doc: Fix example   Miquel Raynal
• [PATCH v3 01/17] imx: imx93_evk: switch to BOOTSTD   Peng Fan (OSS)
• [PATCH v3 01/17] mailbox: add i.MX95 Messaging Unit (MU) driver   Alice Guo
• [PATCH v3 01/17] mailbox: add i.MX95 Messaging Unit (MU) driver   Marek Vasut
• [PATCH v3 01/30] bloblist: Make BLOBLIST_ALLOC the default   Simon Glass
• [PATCH v3 02/13] dm: core: Add a helper to retrieve devices through graph endpoints   Miquel Raynal
• [PATCH v3 02/17] firmware: scmi: smt: Interrupt communication enable   Alice Guo
• [PATCH v3 02/17] firmware: scmi: smt: Interrupt communication enable   Marek Vasut
• [PATCH v3 02/17] imx: imx93_qsb: switch to BOOTSTD   Peng Fan (OSS)
• [PATCH v3 02/30] abuf: Provide a way to get the buffer address   Simon Glass
• [PATCH v3 03/13] sandbox: Add a fake DSI controller and link it to the panel   Miquel Raynal
• [PATCH v3 03/17] imx: imx91_evk: switch to BOOTSTD   Peng Fan (OSS)
• [PATCH v3 03/17] pinctrl: nxp: add SCMI pin control protocol driver   Alice Guo
• [PATCH v3 03/17] pinctrl: nxp: add SCMI pin control protocol driver   Marek Vasut
• [PATCH v3 03/30] abuf: Allow use in host tools   Simon Glass
• [PATCH v3 04/13] test: dm: test-fdt: Add checks for uclass_get_device_by_endpoint()   Miquel Raynal
• [PATCH v3 04/17] imx: imx8mp_evk: Enable dynamic settings to mmcdev and mmcroot   Peng Fan (OSS)
• [PATCH v3 04/17] scmi_protocols: add SCMI misc protocol protocol_id and message_id for getting the ROM passover data   Alice Guo
• [PATCH v3 04/30] abuf: Provide a constant buffer   Simon Glass
• [PATCH v3 05/13] power-domain: Add refcounting   Miquel Raynal
• [PATCH v3 05/17] imx: imx8mp_evk: Switch to BOOTSTD   Peng Fan (OSS)
• [PATCH v3 05/17] scmi_protocols: add SCMI Performance domain management protocol message IDs   Alice Guo
• [PATCH v3 05/30] cpu: Provide a way to get the physical-address size   Simon Glass
• [PATCH v3 06/13] clk: Ensure the parent clocks are enabled while reparenting   Miquel Raynal
• [PATCH v3 06/17] clk: scmi: add the command CLOCK_PARENT_SET   Alice Guo
• [PATCH v3 06/17] imx: imx8mn_evk: Cleanup headers   Peng Fan (OSS)
• [PATCH v3 06/30] serial: Support info() method in ns16550 xPL with UPL   Simon Glass
• [PATCH v3 07/13] clk: imx8mp: Add media related clocks   Miquel Raynal
• [PATCH v3 07/17] clk: scmi: check the clock state/parent/rate control permissions   Alice Guo
• [PATCH v3 07/17] clk: scmi: check the clock state/parent/rate control permissions   Marek Vasut
• [PATCH v3 07/17] imx: imx8mn_evk: Drop DECLARE_GLOBAL_DATA_PTR   Peng Fan (OSS)
• [PATCH v3 07/30] mkimage: Update map_to_sysmem() to match its prototype   Simon Glass
• [PATCH v3 08/13] imx: power-domain: Describe the i.MX8 MEDIAMIX domain   Miquel Raynal
• [PATCH v3 08/17] imx: imx8mn_evk: Enable dynamic settings to mmcdev and mmcroot   Peng Fan (OSS)
• [PATCH v3 08/17] scmi_protocols: update struct scmi_base_discover_list_protocols_out   Alice Guo
• [PATCH v3 08/17] scmi_protocols: update struct scmi_base_discover_list_protocols_out   Marek Vasut
• [PATCH v3 08/30] x86: Enable meminfo command   Simon Glass
• [PATCH v3 09/13] imx: power-domain: Add support for the MEDIAMIX control block   Miquel Raynal
• [PATCH v3 09/17] imx9: scmi: add i.MX95 SoC and clock related code   Alice Guo
• [PATCH v3 09/17] imx9: scmi: add i.MX95 SoC and clock related code   Marek Vasut
• [PATCH v3 09/17] imx: imx8mn_evk: Switch to BOOTSTD   Peng Fan (OSS)
• [PATCH v3 09/30] x86: Show the timestamp counter with bdinfo   Simon Glass
• [PATCH v3 1/2] bloblist: add api to get blob with size   Raymond Mao
• [PATCH v3 1/3] rockchip: rk356x: Implement checkboard() to print SoC variant   Kever Yang
• [PATCH v3 1/5] common: board: Simplify array with function pointers with CONFIG_IS_ENABLED   Jerome Forissier
• [PATCH v3 1/6] arm64: dts: qcom: qcs9100: Add support for the QCS9100 Ride and Ride Rev3 boards   Varadarajan Narayanan
• [PATCH v3 1/6] arm: imx8m: add OP-TEE node   Yannic Moog
• [PATCH v3 1/7] efi_loader: Refactor device and image paths into a function   Simon Glass
• [PATCH v3 1/8] usb: dwc2: Extract register definitions to common header file   Junhui Liu
• [PATCH v3 1/8] usb: dwc2: Extract register definitions to common header file   Mattijs Korpershoek
• [PATCH v3 10/13] video: imx: Fix Makefile in order to be able to add other imx drivers   Miquel Raynal
• [PATCH v3 10/17] imx9: add i.MX95 Kconfig and Makefile   Alice Guo
• [PATCH v3 10/17] imx9: add i.MX95 Kconfig and Makefile   Marek Vasut
• [PATCH v3 10/17] imx: imx8mm_evk: Enable dynamic settings to mmcdev and mmcroot   Peng Fan (OSS)
• [PATCH v3 10/30] ofnode: Use 4K for a default tree-size   Simon Glass
• [PATCH v3 11/13] video: imx: Add LDB driver   Miquel Raynal
• [PATCH v3 11/17] imx9: scmi: soc: Override h_spl_load_read with trampoline buffer   Alice Guo
• [PATCH v3 11/17] imx9: scmi: soc: Override h_spl_load_read with trampoline buffer   Marek Vasut
• [PATCH v3 11/17] imx9: scmi: soc: Override h_spl_load_read with trampoline buffer   Marek Vasut
• [PATCH v3 11/17] imx9: scmi: soc: Override h_spl_load_read with trampoline buffer   Peng Fan
• [PATCH v3 11/17] imx9: scmi: soc: Override h_spl_load_read with trampoline buffer   Marek Vasut
• [PATCH v3 11/17] imx: imx8mm_evk: Switch to BOOTSTD   Peng Fan (OSS)
• [PATCH v3 11/30] ofnode: Indicate when out of space in a few places   Simon Glass
• [PATCH v3 12/13] video: imx: Add LCDIF driver   Miquel Raynal
• [PATCH v3 12/17] imx: imx8mq_evk: Cleanup headers   Peng Fan (OSS)
• [PATCH v3 12/17] scmi: add the macro SCMI_MSG   Alice Guo
• [PATCH v3 12/30] ofnode: Update of_add_subnode() to indicate name is alloced   Simon Glass
• [PATCH v3 13/13] imx8mp_evk: Enable display support   Miquel Raynal
• [PATCH v3 13/13] imx8mp_evk: Enable display support   Fabio Estevam
• [PATCH v3 13/13] imx8mp_evk: Enable display support   Fabio Estevam
• [PATCH v3 13/13] imx8mp_evk: Enable display support   Miquel Raynal
• [PATCH v3 13/17] imx: imx8mq_evk: Drop DECLARE_GLOBAL_DATA_PTR   Peng Fan (OSS)
• [PATCH v3 13/17] imx: Kconfig: IMX8_ROMAPI is not configured for i.MX95   Alice Guo
• [PATCH v3 13/30] boot: Rename fit_image_get_data()   Simon Glass
• [PATCH v3 14/17] binman: add a new entry type for packing DDR PHY firmware images   Alice Guo
• [PATCH v3 14/17] binman: add a new entry type for packing DDR PHY firmware images   Marek Vasut
• [PATCH v3 14/17] imx: imx8mq_evk: Enable dynamic settings to mmcdev and mmcroot   Peng Fan (OSS)
• [PATCH v3 14/30] boot: Rename fit_image_get_data_and_size()   Simon Glass
• [PATCH v3 15/17] imx: imx8mq_evk: Switch to BOOTSTD   Peng Fan (OSS)
• [PATCH v3 15/17] tools: imx8image: add i.MX95 support   Alice Guo
• [PATCH v3 15/17] tools: imx8image: add i.MX95 support   Marek Vasut
• [PATCH v3 15/30] boot: Use fit_image_get_data() to get data   Simon Glass
• [PATCH v3 16/17] imx: add V2X container support on i.MX95   Alice Guo
• [PATCH v3 16/17] imx: imx93-11x11-evk: drop duplicated nodes   Peng Fan (OSS)
• [PATCH v3 16/30] test: Fix inpected typo in upl test   Simon Glass
• [PATCH v3 17/17] gpio: adp5585: Update compatible string   Peng Fan (OSS)
• [PATCH v3 17/17] imx95_evk: add i.MX95 19x19 EVK board basic support   Alice Guo
• [PATCH v3 17/17] imx95_evk: add i.MX95 19x19 EVK board basic support   Marek Vasut
• [PATCH v3 17/30] emulation: fdt: Relax condition for OF_HAS_PRIOR_STAGE   Simon Glass
• [PATCH v3 17/30] emulation: fdt: Relax condition for OF_HAS_PRIOR_STAGE   Tom Rini
• [PATCH v3 18/30] emulation: Use bloblist to hold tables   Simon Glass
• [PATCH v3 19/30] x86: Create more space for SPL with qemu-x86_64   Simon Glass
• [PATCH v3 2/2] tpm: get tpm event log from bloblist   Raymond Mao
• [PATCH v3 2/2] tpm: get tpm event log from bloblist   Ilias Apalodimas
• [PATCH v3 2/2] tpm: get tpm event log from bloblist   Raymond Mao
• [PATCH v3 2/3] rockchip: rk3588: Implement checkboard() to print SoC variant   Kever Yang
• [PATCH v3 2/5] board_init_f(): use static calls   Jerome Forissier
• [PATCH v3 2/6] dts: qcs9100-ride-r3-u-boot: add override dtsi   Varadarajan Narayanan
• [PATCH v3 2/6] phycore-imx8mp_defconfig: add optee load address   Yannic Moog
• [PATCH v3 2/8] usb: dwc2: Fix incorrect ULPI_UTMI_SEL bit setting   Junhui Liu
• [PATCH v3 2/8] usb: dwc2: Fix incorrect ULPI_UTMI_SEL bit setting   Mattijs Korpershoek
• [PATCH v3 20/30] pci: video: Set up the pixel-format field   Simon Glass
• [PATCH v3 21/30] x86: Show an error if video fails   Simon Glass
• [PATCH v3 22/30] x86: Support jumping to a UPL image   Simon Glass
• [PATCH v3 23/30] x86: Enable UPL handoff for SPL   Simon Glass
• [PATCH v3 24/30] x86: Move tables to use SZ macros   Simon Glass
• [PATCH v3 25/30] x86: Align the SMBIOS table to a 4K boundary   Simon Glass
• [PATCH v3 26/30] efi_loader: Avoid mapping the ACPI tables twice   Simon Glass
• [PATCH v3 27/30] x86: emulation: Enable bloblist   Simon Glass
• [PATCH v3 28/30] dm: core: Clarify behaviour of ofnode_name_eq()   Simon Glass
• [PATCH v3 29/30] dm: core: Provide ofnode_name_eq_unit() to accept a unit address   Simon Glass
• [PATCH v3 3/3] rockchip: rk3308: Implement checkboard() to print SoC variant   Kever Yang
• [PATCH v3 3/5] board_init_f_r(): use static calls   Jerome Forissier
• [PATCH v3 3/6] clk/qcom: add initial clock driver for qcs9100   Varadarajan Narayanan
• [PATCH v3 3/6] imx8mm-phygate-tauri-l_defconfig: add optee load address   Yannic Moog
• [PATCH v3 3/8] USB: dwc2: Fix HBstLen setting for external DMA mode   Junhui Liu
• [PATCH v3 3/8] USB: dwc2: Fix HBstLen setting for external DMA mode   Mattijs Korpershoek
• [PATCH v3 30/30] dm: core: Provide ofnode_find_subnode_unit()   Simon Glass
• [PATCH v3 4/5] board_init_r(): use static calls   Jerome Forissier
• [PATCH v3 4/5] board_init_r(): use static calls   Caleb Connolly
• [PATCH v3 4/5] board_init_r(): use static calls   Simon Glass
• [PATCH v3 4/6] phy: qcom: Add SA8775 to QMP UFS PHY driver   Varadarajan Narayanan
• [PATCH v3 4/6] phycore-imx8mm_defconfig: add optee load address   Yannic Moog
• [PATCH v3 4/7] efi_loader: Add a version of efi_binary_run() with more parameters   Simon Glass
• [PATCH v3 4/7] efi_loader: Add a version of efi_binary_run() with more parameters   Mark Kettenis
• [PATCH v3 4/7] efi_loader: Add a version of efi_binary_run() with more parameters   Simon Glass
• [PATCH v3 4/8] usb: dwc2: Clean up with bitfield macros   Junhui Liu
• [PATCH v3 4/8] usb: dwc2: Clean up with bitfield macros   Marek Vasut
• [PATCH v3 4/8] usb: dwc2: Clean up with bitfield macros   Mattijs Korpershoek
• [PATCH v3 5/5] initcall: remove initcall_run_list()   Jerome Forissier
• [PATCH v3 5/5] rockchip: Add support for Radxa ROCK 5C   Kever Yang
• [PATCH v3 5/5] rockchip: Add support for Radxa ROCK 5C   FUKAUMI Naoki
• [PATCH v3 5/5] rpi: Use the U-Boot control FDT for fdt_addr   Simon Glass
• [PATCH v3 5/6] doc: phytec: imx8mp: add OP-TEE documentation   Yannic Moog
• [PATCH v3 5/6] qcom_defconfig: enable SA8775P clock driver   Varadarajan Narayanan
• [PATCH v3 5/8] usb: dwc2: Align macros with Linux kernel definitions   Junhui Liu
• [PATCH v3 5/8] usb: dwc2: Align macros with Linux kernel definitions   Mattijs Korpershoek
• [PATCH v3 6/6] configs: add qcs9100_defconfig   Varadarajan Narayanan
• [PATCH v3 6/6] configs: add qcs9100_defconfig   Sumit Garg
• [PATCH v3 6/6] doc: phytec: imx8mm: add OP-TEE documentation   Yannic Moog
• [PATCH v3 6/7] efi_loader: Pass in the required parameters from EFI bootmeth   Simon Glass
• [PATCH v3 6/8] usb: dwc2: Extract macro definitions to common header   Junhui Liu
• [PATCH v3 6/8] usb: dwc2: Extract macro definitions to common header   Mattijs Korpershoek
• [PATCH v3 6/8] usb: dwc2: Extract macro definitions to common header   Junhui Liu
• [PATCH v3 7/8] usb: dwc2: Unify flush and reset logic with v4.20a support   Junhui Liu
• [PATCH v3 7/8] usb: dwc2: Unify flush and reset logic with v4.20a support   Marek Vasut
• [PATCH v3 7/8] usb: dwc2: Unify flush and reset logic with v4.20a support   Junhui Liu
• [PATCH v3 7/8] usb: dwc2: Unify flush and reset logic with v4.20a support   Marek Vasut
• [PATCH v3 7/8] usb: dwc2: Unify flush and reset logic with v4.20a support   Junhui Liu
• [PATCH v3 7/8] usb: dwc2: Unify flush and reset logic with v4.20a support   Marek Vasut
• [PATCH v3 8/8] usb: dwc2: Replace uint<x>_t types with u<x>   Junhui Liu
• [PATCH v3] rockchip: rk3288: Use rk3288-cru.h from dts/upstream   Jonas Karlman
• [PATCH v4 0/2] Static initcalls   Jerome Forissier
• [PATCH v4 0/5] rockchip: Add support for Radxa ROCK 5C   FUKAUMI Naoki
• [PATCH v4 0/7] efi: Start to chip away at the EFI workaround   Simon Glass
• [PATCH v4 0/8] usb: dwc2: Refactor and update USB DWC2 driver   Junhui Liu
• [PATCH v4 1/2] common: board: make static calls   Jerome Forissier
• [PATCH v4 1/2] common: board: make static calls   Caleb Connolly
• [PATCH v4 1/3] bloblist: add api to get blob with size   Raymond Mao
• [PATCH v4 1/3] bloblist: add api to get blob with size   Heinrich Schuchardt
• [PATCH v4 1/3] bloblist: add api to get blob with size   Raymond Mao
• [PATCH v4 1/3] bloblist: add api to get blob with size   Heinrich Schuchardt
• [PATCH v4 1/3] bloblist: add api to get blob with size   Raymond Mao
• [PATCH v4 1/5] arm64: dts: rockchip: enable PCIe on M.2 E key for Radxa ROCK 5A   FUKAUMI Naoki
• [PATCH v4 1/5] arm64: dts: rockchip: enable PCIe on M.2 E key for Radxa ROCK 5A   Sumit Garg
• [PATCH v4 1/5] arm64: dts: rockchip: enable PCIe on M.2 E key for Radxa ROCK 5A   FUKAUMI Naoki
• [PATCH v4 1/5] arm64: dts: rockchip: enable PCIe on M.2 E key for Radxa ROCK 5A   Sumit Garg
• [PATCH v4 1/7] efi_loader: Refactor device and image paths into a function   Simon Glass
• [PATCH v4 1/8] usb: dwc2: Extract register definitions to common header file   Junhui Liu
• [PATCH v4 2/2] initcall: remove initcall_run_list()   Jerome Forissier
• [PATCH v4 2/3] tcg2: decouple eventlog size from efi   Raymond Mao
• [PATCH v4 2/3] tcg2: decouple eventlog size from efi   Heinrich Schuchardt
• [PATCH v4 2/3] tcg2: decouple eventlog size from efi   Raymond Mao
• [PATCH v4 2/5] arm64: dts: rockchip: Split up RK3588's PCIe pinctrls   FUKAUMI Naoki
• [PATCH v4 2/5] arm64: dts: rockchip: Split up RK3588's PCIe pinctrls   Sumit Garg
• [PATCH v4 2/7] efi_loader: Make efi_run_image() static   Simon Glass
• [PATCH v4 2/8] usb: dwc2: Fix incorrect ULPI_UTMI_SEL bit setting   Junhui Liu
• [PATCH v4 3/3] tpm: get tpm event log from bloblist   Raymond Mao
• [PATCH v4 3/3] tpm: get tpm event log from bloblist   Heinrich Schuchardt
• [PATCH v4 3/3] tpm: get tpm event log from bloblist   Raymond Mao
• [PATCH v4 3/3] tpm: get tpm event log from bloblist   Heinrich Schuchardt
• [PATCH v4 3/3] tpm: get tpm event log from bloblist   Raymond Mao
• [PATCH v4 3/3] tpm: get tpm event log from bloblist   Simon Glass
• [PATCH v4 3/5] arm64: dts: rockchip: Add HDMI0 node to rk3588   FUKAUMI Naoki
• [PATCH v4 3/5] arm64: dts: rockchip: Add HDMI0 node to rk3588   Sumit Garg
• [PATCH v4 3/7] efi_loader: Update efi_run_image() to accept image and device path   Simon Glass
• [PATCH v4 3/8] usb: dwc2: Fix HBstLen setting for external DMA mode   Junhui Liu
• [PATCH v4 4/5] arm64: dts: rockchip: add Radxa ROCK 5C   FUKAUMI Naoki
• [PATCH v4 4/7] efi_loader: Add a version of efi_binary_run() with more parameters   Simon Glass
• [PATCH v4 4/8] usb: dwc2: Clean up with bitfield macros   Junhui Liu
• [PATCH v4 5/5] rockchip: Add support for Radxa ROCK 5C   FUKAUMI Naoki
• [PATCH v4 5/7] efi_loader: Move the fallback code from efi_run_image()   Simon Glass
• [PATCH v4 5/8] usb: dwc2: Align macros with Linux kernel definitions   Junhui Liu
• [PATCH v4 6/7] efi_loader: Pass in the required parameters from EFI bootmeth   Simon Glass
• [PATCH v4 6/8] usb: dwc2: Extract macro definitions to common header   Junhui Liu
• [PATCH v4 7/7] bootmeth_efi: Support PXE booting   Simon Glass
• [PATCH v4 7/8] usb: dwc2: Unify flush and reset logic with v4.20a support   Junhui Liu
• [PATCH v4 7/8] usb: dwc2: Unify flush and reset logic with v4.20a support   Marek Vasut
• [PATCH v4 8/8] usb: dwc2: Replace uint<x>_t types with u<x>   Junhui Liu
• [PATCH v5 0/4] rockchip: Add support for Radxa ROCK 5C   FUKAUMI Naoki
• [PATCH v5 0/4] rockchip: Add support for Radxa ROCK 5C   Sumit Garg
• [PATCH v5 1/4] arm64: dts: rockchip: Split up RK3588's PCIe pinctrls   FUKAUMI Naoki
• [PATCH v5 1/4] arm64: dts: rockchip: Split up RK3588's PCIe pinctrls   Kever Yang
• [PATCH v5 2/4] arm64: dts: rockchip: Add HDMI0 node to rk3588   FUKAUMI Naoki
• [PATCH v5 2/4] arm64: dts: rockchip: Add HDMI0 node to rk3588   Kever Yang
• [PATCH v5 3/4] arm64: dts: rockchip: add Radxa ROCK 5C   FUKAUMI Naoki
• [PATCH v5 3/4] arm64: dts: rockchip: add Radxa ROCK 5C   Kever Yang
• [PATCH v5 4/4] rockchip: Add support for Radxa ROCK 5C   FUKAUMI Naoki
• [PATCH v5 4/4] rockchip: Add support for Radxa ROCK 5C   Kever Yang
• [PATCH v5 4/8] RFC: Revert "bootstd: Make efi_mgr bootmeth work for non-sandbox setups"   Heinrich Schuchardt
• [PATCH v5 4/8] RFC: Revert "bootstd: Make efi_mgr bootmeth work for non-sandbox setups"   Simon Glass
• [PATCH v5 4/8] RFC: Revert "bootstd: Make efi_mgr bootmeth work for non-sandbox setups"   Tom Rini
• [PATCH v5 4/8] RFC: Revert "bootstd: Make efi_mgr bootmeth work for non-sandbox setups"   Simon Glass
• [PATCH v5 4/8] RFC: Revert "bootstd: Make efi_mgr bootmeth work for non-sandbox setups"   Tom Rini
• [PATCH v5 4/8] RFC: Revert "bootstd: Make efi_mgr bootmeth work for non-sandbox setups"   Simon Glass
• [PATCH v5 4/8] RFC: Revert "bootstd: Make efi_mgr bootmeth work for non-sandbox setups"   Tom Rini
• [PATCH v5 9/9] board: ti: Pull redundant DDR functions to a common location and Fixup DDR size when ECC is enabled   Santhosh Kumar K
• [PATCH v6 0/2] cmd: Add support for optee commands.   Tom Rini
• [PATCH v6 0/9] Inline ECC Series   Santhosh Kumar K
• [PATCH v6 1/9] arm: dts: k3-*-ddr: Add ss_cfg reg entry   Santhosh Kumar K
• [PATCH v6 2/9] ram: k3-ddrss: Use the DDR controller BIST engine for ECC priming   Santhosh Kumar K
• [PATCH v6 3/9] ram: k3-ddrss: Add k3_ddrss_ddr_bank_base_size_calc() to solve 'calculations restricted to 32 bits' issue   Santhosh Kumar K
• [PATCH v6 4/9] ram: k3-ddrss: Setup ECC region start and range   Santhosh Kumar K
• [PATCH v6 5/9] ram: k3-ddrss: Enable ECC interrupts   Santhosh Kumar K
• [PATCH v6 6/9] drivers: ram: Kconfig: Add CONFIG_K3_INLINE_ECC   Santhosh Kumar K
• [PATCH v6 7/9] ram: k3-ddrss: Remove 'ti,ecc-enable' support   Santhosh Kumar K
• [PATCH v6 8/9] arm: mach-k3: Set NR_DRAM_BANKS to 2   Santhosh Kumar K
• [PATCH v6 9/9] board: ti: Pull redundant DDR functions to a common location and Fixup DDR size when ECC is enabled   Santhosh Kumar K
• [PULL] u-boot-sh/master   Marek Vasut
• [PULL] u-boot-sh/master   Tom Rini
• [PULL] u-boot-usb/master   Marek Vasut
• [PULL] u-boot-usb/master   Tom Rini
• [RFC PATCH 0/2] Integrate OP-TEE into the RISC-V boot flow   Yu-Chien Peter Lin
• [RFC PATCH 1/1] efi_loader: Call efi_init_early() even earlier   Sam Protsenko
• [RFC PATCH 1/1] efi_loader: Call efi_init_early() even earlier   Heinrich Schuchardt
• [RFC PATCH 1/2] riscv: Add CONFIG_SPL_OPTEE_LOAD_ADDR   Yu-Chien Peter Lin
• [RFC PATCH 2/2] riscv: dts: binman.dtsi: Include OP-TEE OS image   Yu-Chien Peter Lin
• [RFC PATCH] am335x* defconfig: Increase u-boot partition in mtdparts   Judith Mendez
• [RFC PATCH] am335x* defconfig: Increase u-boot partition in mtdparts   Tom Rini
• [RFC PATCH] am335x* defconfig: Increase u-boot partition in mtdparts   Judith Mendez
• [syslinux] Purpose of 'localboot'   Frantisek Rysanek
• [syslinux] Purpose of 'localboot'   Tom Rini
• [U-Boot][PATCH 0/2] Improve fpga cmd usage information   Ibai Erkiaga
• [U-Boot][PATCH 1/2] fpga: fix alignment on fpga cmd usage info   Ibai Erkiaga
• [U-Boot][PATCH 1/2] fpga: fix alignment on fpga cmd usage info   Alexander Dahl
• [U-Boot][PATCH 1/2] fpga: fix alignment on fpga cmd usage info   Erkiaga Elorza, Ibai
• [U-Boot][PATCH 2/2] fpga: improve loads usage information   Ibai Erkiaga
• [U-Boot][PATCH] zynqmp_gqspi: update to log_debug   Ibai Erkiaga
• How would I do signature verification of standalone binary?   Simon Glass
• Integrated EFI tests better?   Simon Glass
• Issue JTAG debugging U-Boot   tanjadeu at liwest.at
• Issue JTAG debugging U-Boot   Fabio Estevam
• Lab failure on JH7110 (StarFive VisionFive 2)   Simon Glass
• LwIP and multiple network interfaces   E Shattow
• LwIP and multiple network interfaces   Tom Rini
• LwIP and multiple network interfaces   E Shattow
• LwIP and multiple network interfaces   Tom Rini
• LwIP and multiple network interfaces   E Shattow
• LwIP and multiple network interfaces   Jerome Forissier
• LwIP and multiple network interfaces   E Shattow
• LwIP and multiple network interfaces   E Shattow
• LwIP and multiple network interfaces   Jerome Forissier
• LwIP and multiple network interfaces   E Shattow
• MUSB compile failure for imx28   Rogan Dawes
• MUSB compile failure for imx28   Rogan Dawes
• MUSB compile failure for imx28   Fabio Estevam
• MUSB compile failure for imx28   Rogan Dawes
• MUSB compile failure for imx28   Fabio Estevam
• MUSB compile failure for imx28   Rogan Dawes
• New Defects reported by Coverity Scan for Das U-Boot   Abbarapu, Venkatesh
• New Defects reported by Coverity Scan for Das U-Boot   Tom Rini
• OP-TEE test suite   Simon Glass
• Please pull u-boot-watchdog/master   Stefan Roese
• Please pull u-boot-watchdog/master   Tom Rini
• Proposal for a New Command to U-Boot Fuse Programming   Harsha Vardhan V M
• Proposal for a New Command to U-Boot Fuse Programming   Simon Glass
• Proposal for a New Command to U-Boot Fuse Programming   Tom Rini
• Pull request: u-boot-rockchip-20250110   Kever Yang
• Pull request: u-boot-rockchip-20250110   Tom Rini
• Pull request efi-next-20250104   Heinrich Schuchardt
• Pull request efi-next-20250104   Jonas Karlman
• Pull request efi-next-20250104   Heinrich Schuchardt
• Pull request efi-next-20250104   Tom Rini
• Pull request efi-next-20250105   Heinrich Schuchardt
• Pull request efi-next-20250105   Tom Rini
• Pull request for tpm-master-07012025   Ilias Apalodimas
• Pull request for tpm-master-07012025   Tom Rini
• Purpose of 'localboot'   Simon Glass
• rpi: Compute Module 5 doesn't autoboot without debug UART   Gijs Peskens
• Secure boot on Milk V duo 256   Waldo Alvarez
• Secure boot on Milk V duo 256   Yixun Lan
• Secure boot on Milk V duo 256   Waldo Alvarez
• Simon Glass's future with Das U-Boot project?   Tom Rini
• Simon Glass's future with Das U-Boot project?   Ilias Apalodimas
• Simon Glass's future with Das U-Boot project?   Michael Nazzareno Trimarchi
• Simon Glass's future with Das U-Boot project?   Alex Kiernan
• 回复: [EXT] Re: [PATCH v2 16/17] imx95_evk: add i.MX95 19x19 EVK board basic support   Alice Guo (OSS)
• 回复: [EXT] Re: [PATCH v2 16/17] imx95_evk: add i.MX95 19x19 EVK board basic support   Alice Guo (OSS)
• 回复: [EXT] Re: [PATCH v2 16/17] imx95_evk: add i.MX95 19x19 EVK board basic support   Alice Guo (OSS)
• 回复: [EXT] Re: [PATCH v3 01/17] mailbox: add i.MX95 Messaging Unit (MU) driver   Alice Guo (OSS)
• Re: 回复: [EXT] Re: [PATCH v3 01/17] mailbox: add i.MX95 Messaging Unit (MU) driver   Marek Vasut
• 回复: [EXT] Re: [PATCH v3 01/17] mailbox: add i.MX95 Messaging Unit (MU) driver   Peng Fan
• Re: 回复: [EXT] Re: [PATCH v3 01/17] mailbox: add i.MX95 Messaging Unit (MU) driver   Marek Vasut
• RE: 回复: [EXT] Re: [PATCH v3 01/17] mailbox: add i.MX95 Messaging Unit (MU) driver   Peng Fan
• 回复: [EXT] Re: [PATCH v3 02/17] firmware: scmi: smt: Interrupt communication enable   Alice Guo (OSS)
• Re: 回复: [EXT] Re: [PATCH v3 02/17] firmware: scmi: smt: Interrupt communication enable   Marek Vasut
• 回复: [EXT] Re: [PATCH v3 03/17] pinctrl: nxp: add SCMI pin control protocol driver   Alice Guo (OSS)
• Re: 回复: [EXT] Re: [PATCH v3 03/17] pinctrl: nxp: add SCMI pin control protocol driver   Marek Vasut
• 回复: [EXT] Re: [PATCH v3 07/17] clk: scmi: check the clock state/parent/rate control permissions   Alice Guo (OSS)
• Re: 回复: [EXT] Re: [PATCH v3 07/17] clk: scmi: check the clock state/parent/rate control permissions   Marek Vasut
• 回复: [EXT] Re: [PATCH v3 08/17] scmi_protocols: update struct scmi_base_discover_list_protocols_out   Alice Guo (OSS)
• Re: 回复: [EXT] Re: [PATCH v3 08/17] scmi_protocols: update struct scmi_base_discover_list_protocols_out   Marek Vasut
• 回复: [EXT] Re: [PATCH v3 11/17] imx9: scmi: soc: Override h_spl_load_read with trampoline buffer   Alice Guo (OSS)
• Re: 回复: [EXT] Re: [PATCH v3 11/17] imx9: scmi: soc: Override h_spl_load_read with trampoline buffer   Marek Vasut
• 回复: 回复: [EXT] Re: [PATCH v3 02/17] firmware: scmi: smt: Interrupt communication enable   Alice Guo (OSS)
• Re: 回复: 回复: [EXT] Re: [PATCH v3 02/17] firmware: scmi: smt: Interrupt communication enable   Marek Vasut
• 回复: 回复: [EXT] Re: [PATCH v3 03/17] pinctrl: nxp: add SCMI pin control protocol driver   Alice Guo (OSS)
• Re: 回复: 回复: [EXT] Re: [PATCH v3 03/17] pinctrl: nxp: add SCMI pin control protocol driver   Marek Vasut
• RE: 回复: 回复: [EXT] Re: [PATCH v3 03/17] pinctrl: nxp: add SCMI pin control protocol driver   Peng Fan
• Re: 回复: 回复: [EXT] Re: [PATCH v3 03/17] pinctrl: nxp: add SCMI pin control protocol driver   Marek Vasut
• 回复: 回复: [EXT] Re: [PATCH v3 03/17] pinctrl: nxp: add SCMI pin control protocol driver   Peng Fan
• 回复: 回复: 回复: [EXT] Re: [PATCH v3 02/17] firmware: scmi: smt: Interrupt communication enable   Alice Guo (OSS)
• Re: 回复: 回复: 回复: [EXT] Re: [PATCH v3 02/17] firmware: scmi: smt: Interrupt communication enable   Marek Vasut
• RE: 回复: 回复: 回复: [EXT] Re: [PATCH v3 02/17] firmware: scmi: smt: Interrupt communication enable   Peng Fan
• Re: 回复: 回复: 回复: [EXT] Re: [PATCH v3 02/17] firmware: scmi: smt: Interrupt communication enable   Marek Vasut
• 回复: 回复: 回复: [EXT] Re: [PATCH v3 02/17] firmware: scmi: smt: Interrupt communication enable   Peng Fan
• Re: 回复: 回复: 回复: [EXT] Re: [PATCH v3 02/17] firmware: scmi: smt: Interrupt communication enable   Marek Vasut

Last message date: Mon Jan 13 21:03:52 CET 2025
Archived on: Mon Jan 13 21:04:08 CET 2025

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...